coreboot-kgpe-d16/targets/via/epia-m/Config.lb

62 lines
1.5 KiB
Plaintext
Raw Normal View History

# Sample config file for EPIA-M
# This will make a target directory of ./epia-m
target epia-m
mainboard via/epia-m
option MAXIMUM_CONSOLE_LOGLEVEL=8
option DEFAULT_CONSOLE_LOGLEVEL=8
option CONFIG_CONSOLE_SERIAL8250=1
option ROM_SIZE=256*1024
option HAVE_OPTION_TABLE=1
option CONFIG_ROM_STREAM=1
option HAVE_FALLBACK_BOOT=1
###
### Compute the location and size of where this firmware image
### (linuxBIOS plus bootloader) will live in the boot rom chip.
###
option FALLBACK_SIZE=0x30000
## LinuxBIOS C code runs at this location in RAM
option _RAMBASE=0x00004000
#
###
### Compute the start location and size size of
### The linuxBIOS bootloader.
###
#
# EPIA-M
#
#romimage "normal"
# option USE_FALLBACK_IMAGE=0
# option ROM_IMAGE_SIZE=0xc000
# option ROM_SECTION_OFFSET=0x10000
# option ROM_SECTION_SIZE=0x18000
# option XIP_ROM_BASE=0xfffd0000
# option LINUXBIOS_EXTRA_VERSION=".0Normal"
# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
# payload ../../../../tg3--ide_disk.zelf
# payload ../../../../../lnxieepro100.ebi
# payload /filo.elf
#end
romimage "fallback"
option USE_FALLBACK_IMAGE=1
option ROM_IMAGE_SIZE=0x10000
option ROM_SECTION_OFFSET=0x10000
option ROM_SECTION_SIZE=0x30000
# option XIP_ROM_BASE=0xfffe0000
option LINUXBIOS_EXTRA_VERSION=".0Fallback"
# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
# payload ../../../../tg3--ide_disk.zelf
# payload ../../../../../lnxieepro100.ebi
payload /filo.elf
end
buildrom ./linuxbios.rom ROM_SIZE "fallback"