coreboot-kgpe-d16/payloads/libpayload/include/coreboot_tables.h

382 lines
8.3 KiB
C
Raw Normal View History

/*
* This file is part of the libpayload project.
*
* Copyright (C) 2008 Advanced Micro Devices, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef _COREBOOT_TABLES_H
#define _COREBOOT_TABLES_H
#include <arch/types.h>
#include <ipchksum.h>
struct cbuint64 {
u32 lo;
u32 hi;
};
struct cb_header {
u8 signature[4];
u32 header_bytes;
u32 header_checksum;
u32 table_bytes;
u32 table_checksum;
u32 table_entries;
};
struct cb_record {
u32 tag;
u32 size;
};
#define CB_TAG_UNUSED 0x0000
#define CB_TAG_MEMORY 0x0001
struct cb_memory_range {
struct cbuint64 start;
struct cbuint64 size;
u32 type;
};
#define CB_MEM_RAM 1
#define CB_MEM_RESERVED 2
#define CB_MEM_ACPI 3
#define CB_MEM_NVS 4
#define CB_MEM_UNUSABLE 5
#define CB_MEM_VENDOR_RSVD 6
#define CB_MEM_TABLE 16
struct cb_memory {
u32 tag;
u32 size;
struct cb_memory_range map[0];
};
#define CB_TAG_HWRPB 0x0002
struct cb_hwrpb {
u32 tag;
u32 size;
u64 hwrpb;
};
#define CB_TAG_MAINBOARD 0x0003
struct cb_mainboard {
u32 tag;
u32 size;
u8 vendor_idx;
u8 part_number_idx;
u8 strings[0];
};
#define CB_TAG_VERSION 0x0004
#define CB_TAG_EXTRA_VERSION 0x0005
#define CB_TAG_BUILD 0x0006
#define CB_TAG_COMPILE_TIME 0x0007
#define CB_TAG_COMPILE_BY 0x0008
#define CB_TAG_COMPILE_HOST 0x0009
#define CB_TAG_COMPILE_DOMAIN 0x000a
#define CB_TAG_COMPILER 0x000b
#define CB_TAG_LINKER 0x000c
#define CB_TAG_ASSEMBLER 0x000d
struct cb_string {
u32 tag;
u32 size;
u8 string[0];
};
#define CB_TAG_SERIAL 0x000f
struct cb_serial {
u32 tag;
u32 size;
#define CB_SERIAL_TYPE_IO_MAPPED 1
#define CB_SERIAL_TYPE_MEMORY_MAPPED 2
u32 type;
u32 baseaddr;
u32 baud;
u32 regwidth;
coreboot_tables: Extend serial port description Extend the serial port description to include the input clock frequency and a payload specific value. Without the input frequency it is impossible for the payload to compute the baud-rate divisor without making an assumption about the frequency. This breaks down when the UART is able to support multiple input clock frequencies. Add the UART_PCI_ADDR Kconfig value to specify the unique PCI device being used as the console UART. Specify this value as zero when the UART is not on the PCI bus. Otherwise specify the device using bus, device and function along with setting the valid bit. Currently the only payload to consume these new fields is the EDK-II CorebootPayloadPkg. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Testing is successful when CorebootPayloadPkg is able to properly initialize the serial port without using built-in values. Change-Id: Id4b4455bbf9583f0d66c315d38c493a81fd852a8 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14609 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-04 20:59:19 +02:00
/* Crystal or input frequency to the chip containing the UART.
* Provide the board specific details to allow the payload to
* initialize the chip containing the UART and make independent
* decisions as to which dividers to select and their values
* to eventually arrive at the desired console baud-rate. */
u32 input_hertz;
/* UART PCI address: bus, device, function
* 1 << 31 - Valid bit, PCI UART in use
* Bus << 20
* Device << 15
* Function << 12
*/
u32 uart_pci_addr;
};
#define CB_TAG_CONSOLE 0x00010
struct cb_console {
u32 tag;
u32 size;
u16 type;
};
#define CB_TAG_CONSOLE_SERIAL8250 0
#define CB_TAG_CONSOLE_VGA 1 // OBSOLETE
#define CB_TAG_CONSOLE_BTEXT 2 // OBSOLETE
#define CB_TAG_CONSOLE_LOGBUF 3 // OBSOLETE
#define CB_TAG_CONSOLE_SROM 4 // OBSOLETE
#define CB_TAG_CONSOLE_EHCI 5
#define CB_TAG_FORWARD 0x00011
struct cb_forward {
u32 tag;
u32 size;
u64 forward;
};
#define CB_TAG_FRAMEBUFFER 0x0012
struct cb_framebuffer {
u32 tag;
u32 size;
u64 physical_address;
u32 x_resolution;
u32 y_resolution;
u32 bytes_per_line;
u8 bits_per_pixel;
u8 red_mask_pos;
u8 red_mask_size;
u8 green_mask_pos;
u8 green_mask_size;
u8 blue_mask_pos;
u8 blue_mask_size;
u8 reserved_mask_pos;
u8 reserved_mask_size;
};
#define CB_TAG_GPIO 0x0013
#define CB_GPIO_ACTIVE_LOW 0
#define CB_GPIO_ACTIVE_HIGH 1
#define CB_GPIO_MAX_NAME_LENGTH 16
struct cb_gpio {
u32 port;
u32 polarity;
u32 value;
u8 name[CB_GPIO_MAX_NAME_LENGTH];
};
struct cb_gpios {
u32 tag;
u32 size;
u32 count;
struct cb_gpio gpios[0];
};
#define CB_TAG_VDAT 0x0015
#define CB_TAG_VBNV 0x0019
#define CB_TAG_VBOOT_HANDOFF 0x0020
arm: libpayload: Add cache coherent DMA memory definition and management This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-28 00:48:32 +02:00
#define CB_TAG_DMA 0x0022
#define CB_TAG_RAM_OOPS 0x0023
#define CB_TAG_MTC 0x002b
#define CB_TAG_VPD 0x002c
struct lb_range {
uint32_t tag;
uint32_t size;
uint64_t range_start;
uint32_t range_size;
};
#define CB_TAG_TIMESTAMPS 0x0016
#define CB_TAG_CBMEM_CONSOLE 0x0017
#define CB_TAG_MRC_CACHE 0x0018
#define CB_TAG_ACPI_GNVS 0x0024
#define CB_TAG_WIFI_CALIBRATION 0x0027
struct cb_cbmem_tab {
uint32_t tag;
uint32_t size;
uint64_t cbmem_tab;
};
#define CB_TAG_BOARD_ID 0x0025
struct cb_board_id {
uint32_t tag;
uint32_t size;
/* Board ID as retrieved from the board revision GPIOs. */
uint32_t board_id;
};
#define CB_TAG_X86_ROM_MTRR 0x0021
struct cb_x86_rom_mtrr {
uint32_t tag;
uint32_t size;
/* The variable range MTRR index covering the ROM. If one wants to
* enable caching the ROM, the variable MTRR needs to be set to
* write-protect. To disable the caching after enabling set the
* type to uncacheable. */
uint32_t index;
};
#define CB_TAG_MAC_ADDRS 0x0026
struct mac_address {
uint8_t mac_addr[6];
uint8_t pad[2]; /* Pad it to 8 bytes to keep it simple. */
};
struct cb_macs {
uint32_t tag;
uint32_t size;
uint32_t count;
struct mac_address mac_addrs[0];
};
#define CB_TAG_RAM_CODE 0x0028
struct cb_ram_code {
uint32_t tag;
uint32_t size;
uint32_t ram_code;
};
2015-01-08 19:29:19 +01:00
#define CB_TAG_SPI_FLASH 0x0029
struct cb_spi_flash {
uint32_t tag;
uint32_t size;
uint32_t flash_size;
uint32_t sector_size;
uint32_t erase_cmd;
};
#define CB_TAG_BOOT_MEDIA_PARAMS 0x0030
struct cb_boot_media_params {
uint32_t tag;
uint32_t size;
/* offsets are relative to start of boot media */
uint64_t fmap_offset;
uint64_t cbfs_offset;
uint64_t cbfs_size;
uint64_t boot_media_size;
};
#define CB_TAG_TSC_INFO 0x0032
struct cb_tsc_info {
uint32_t tag;
uint32_t size;
uint32_t freq_khz;
};
#define CB_TAG_SERIALNO 0x002a
#define CB_MAX_SERIALNO_LENGTH 32
#define CB_TAG_CMOS_OPTION_TABLE 0x00c8
struct cb_cmos_option_table {
u32 tag;
u32 size;
u32 header_length;
};
#define CB_TAG_OPTION 0x00c9
#define CB_CMOS_MAX_NAME_LENGTH 32
struct cb_cmos_entries {
u32 tag;
u32 size;
u32 bit;
u32 length;
u32 config;
u32 config_id;
u8 name[CB_CMOS_MAX_NAME_LENGTH];
};
#define CB_TAG_OPTION_ENUM 0x00ca
#define CB_CMOS_MAX_TEXT_LENGTH 32
struct cb_cmos_enums {
u32 tag;
u32 size;
u32 config_id;
u32 value;
u8 text[CB_CMOS_MAX_TEXT_LENGTH];
};
#define CB_TAG_OPTION_DEFAULTS 0x00cb
#define CB_CMOS_IMAGE_BUFFER_SIZE 128
struct cb_cmos_defaults {
u32 tag;
u32 size;
u32 name_length;
u8 name[CB_CMOS_MAX_NAME_LENGTH];
u8 default_set[CB_CMOS_IMAGE_BUFFER_SIZE];
};
#define CB_TAG_OPTION_CHECKSUM 0x00cc
#define CB_CHECKSUM_NONE 0
#define CB_CHECKSUM_PCBIOS 1
struct cb_cmos_checksum {
u32 tag;
u32 size;
u32 range_start;
u32 range_end;
u32 location;
u32 type;
};
/* Helpful inlines */
static inline u64 cb_unpack64(struct cbuint64 val)
{
return (((u64) val.hi) << 32) | val.lo;
}
static inline u16 cb_checksum(const void *ptr, unsigned len)
{
return ipchksum(ptr, len);
}
static inline const char *cb_mb_vendor_string(const struct cb_mainboard *cbm)
{
return (char *)(cbm->strings + cbm->vendor_idx);
}
static inline const char *cb_mb_part_string(const struct cb_mainboard *cbm)
{
return (char *)(cbm->strings + cbm->part_number_idx);
}
/* Helpful macros */
#define MEM_RANGE_COUNT(_rec) \
(((_rec)->size - sizeof(*(_rec))) / sizeof((_rec)->map[0]))
#define MEM_RANGE_PTR(_rec, _idx) \
(void *)(((u8 *) (_rec)) + sizeof(*(_rec)) \
+ (sizeof((_rec)->map[0]) * (_idx)))
#endif