coreboot-kgpe-d16/src/mainboard/compulab/intense_pc/gpio.c

220 lines
5.7 KiB
C
Raw Normal View History

mainboard/compulab: add support for CompuLab Intense-PC Add coreboot support for CompuLab Intense-PC (Ivy Bridge) Modifications: - Memory SPDs have been fixed to detect both installed SODIMM modules - Full-height Mini-PCIe slot defaults to PCIe mode - mSATA can be chosen instead of mPCIe via Kconfig option ENABLE_MSATA Tested (Xubuntu 17.10/Linux 4.13 where applicable): - 2+2GB DDR3-1600 SODIMMs pass memtest - 4+4GB DDR3-1600 SODIMMs pass memtest - 4+8GB DDR3-1333 SODIMMs pass memtest - 8+8GB DDR3-1333 SODIMMs pass memtest - Booting via USB working (with no SATA HDD present) - Booting to main SATA HDD working - DisplayPort and HDMI output working for coreboot init (*requires* VGA BIOS) - DisplayPort and HDMI dual-head working in Linux - Mini-PCIe devices (half/full-height) detected in Linux - mSATA working (when chosen using ENABLE_MSATA) - Onboard Intel 82579 GbE working - Secondary Realtek 8111 GbE working - Rear eSATA ports working - Onboard analog audio output working - HDMI audio output working - USB 3.0 working - Suspend to RAM (S3) working, but not tested extensively - Mini PCIe WiFi - FACE module FM-4USB (4 USB 2.0 ports) Disabled/unsupported: - TPM (BTO option, not included in base config) - FACE modules: - FM-USB3 (USB 3.0/mSATA) NOT SUPPORTED/TESTED - FM-SER (serial) NOT SUPPORTED/TESTED - FM-XTDEU2/4 (LAN) NOT SUPPORTED/TESTED - FM-XTDE4U2/4 (Quad LAN) NOT SUPPORTED/TESTED - FM-XTDM2 (dual mPCIe) NOT SUPPORTED/TESTED - FM-VC (video capture) NOT SUPPORTED/TESTED - FM-POE (Quad LAN w/PoE) NOT SUPPORTED/TESTED Not tested: - RS-232 Product information: http://www.fit-pc.com/web/products/intense-pc/ Change-Id: I741b0b2f87eb9147c375b405a5b6989a10c7ad0a Signed-off-by: Hal Martin <hal.martin@gmail.com> Reviewed-on: https://review.coreboot.org/22210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-10-28 12:58:08 +02:00
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2008-2009 coresystems GmbH
* Copyright (C) 2014 Vladimir Serbinenko
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of
* the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <southbridge/intel/common/gpio.h>
static const struct pch_gpio_set1 pch_gpio_set1_mode = {
.gpio0 = GPIO_MODE_GPIO,
.gpio1 = GPIO_MODE_GPIO,
.gpio2 = GPIO_MODE_GPIO,
.gpio3 = GPIO_MODE_GPIO,
.gpio4 = GPIO_MODE_GPIO,
.gpio5 = GPIO_MODE_GPIO,
.gpio6 = GPIO_MODE_GPIO,
.gpio7 = GPIO_MODE_GPIO,
.gpio8 = GPIO_MODE_GPIO,
.gpio9 = GPIO_MODE_NATIVE,
.gpio10 = GPIO_MODE_NATIVE,
.gpio11 = GPIO_MODE_GPIO,
.gpio12 = GPIO_MODE_NATIVE,
.gpio13 = GPIO_MODE_NATIVE,
.gpio14 = GPIO_MODE_GPIO,
.gpio15 = GPIO_MODE_GPIO,
.gpio16 = GPIO_MODE_NATIVE,
.gpio17 = GPIO_MODE_GPIO,
.gpio18 = GPIO_MODE_NATIVE,
.gpio19 = GPIO_MODE_NATIVE,
.gpio20 = GPIO_MODE_NATIVE,
.gpio21 = GPIO_MODE_NATIVE,
.gpio22 = GPIO_MODE_NATIVE,
.gpio23 = GPIO_MODE_NATIVE,
.gpio24 = GPIO_MODE_GPIO,
.gpio25 = GPIO_MODE_NATIVE,
.gpio26 = GPIO_MODE_NATIVE,
.gpio27 = GPIO_MODE_GPIO,
.gpio28 = GPIO_MODE_GPIO,
.gpio29 = GPIO_MODE_GPIO,
.gpio30 = GPIO_MODE_NATIVE,
.gpio31 = GPIO_MODE_GPIO,
};
static const struct pch_gpio_set1 pch_gpio_set1_direction = {
.gpio0 = GPIO_DIR_INPUT,
.gpio1 = GPIO_DIR_INPUT,
.gpio2 = GPIO_DIR_INPUT,
.gpio3 = GPIO_DIR_INPUT,
.gpio4 = GPIO_DIR_INPUT,
.gpio5 = GPIO_DIR_INPUT,
.gpio6 = GPIO_DIR_INPUT,
.gpio7 = GPIO_DIR_INPUT,
.gpio8 = GPIO_DIR_OUTPUT,
.gpio11 = GPIO_DIR_INPUT,
.gpio14 = GPIO_DIR_INPUT,
.gpio15 = GPIO_DIR_INPUT,
.gpio17 = GPIO_DIR_INPUT,
.gpio24 = GPIO_DIR_OUTPUT,
.gpio27 = GPIO_DIR_OUTPUT,
.gpio28 = GPIO_DIR_OUTPUT,
.gpio29 = GPIO_DIR_OUTPUT,
.gpio31 = GPIO_DIR_INPUT,
};
static const struct pch_gpio_set1 pch_gpio_set1_level = {
#if IS_ENABLED(CONFIG_ENABLE_MSATA)
.gpio8 = GPIO_LEVEL_LOW,
#else
.gpio8 = GPIO_LEVEL_HIGH,
#endif
.gpio24 = GPIO_LEVEL_LOW,
.gpio27 = GPIO_LEVEL_LOW,
.gpio28 = GPIO_LEVEL_LOW,
.gpio29 = GPIO_LEVEL_HIGH,
};
static const struct pch_gpio_set1 pch_gpio_set1_reset = {
.gpio24 = GPIO_RESET_RSMRST,
};
static const struct pch_gpio_set1 pch_gpio_set1_invert = {
.gpio1 = GPIO_INVERT,
.gpio7 = GPIO_INVERT,
.gpio14 = GPIO_INVERT,
.gpio15 = GPIO_INVERT,
};
static const struct pch_gpio_set1 pch_gpio_set1_blink = {
};
static const struct pch_gpio_set2 pch_gpio_set2_mode = {
.gpio32 = GPIO_MODE_NATIVE,
.gpio33 = GPIO_MODE_NATIVE,
.gpio34 = GPIO_MODE_GPIO,
.gpio35 = GPIO_MODE_NATIVE,
.gpio36 = GPIO_MODE_NATIVE,
.gpio37 = GPIO_MODE_GPIO,
.gpio38 = GPIO_MODE_NATIVE,
.gpio39 = GPIO_MODE_NATIVE,
.gpio40 = GPIO_MODE_NATIVE,
.gpio41 = GPIO_MODE_NATIVE,
.gpio42 = GPIO_MODE_NATIVE,
.gpio43 = GPIO_MODE_NATIVE,
.gpio44 = GPIO_MODE_NATIVE,
.gpio45 = GPIO_MODE_NATIVE,
.gpio46 = GPIO_MODE_GPIO,
.gpio47 = GPIO_MODE_NATIVE,
.gpio48 = GPIO_MODE_NATIVE,
.gpio49 = GPIO_MODE_GPIO,
.gpio50 = GPIO_MODE_GPIO,
.gpio51 = GPIO_MODE_GPIO,
.gpio52 = GPIO_MODE_GPIO,
.gpio53 = GPIO_MODE_GPIO,
.gpio54 = GPIO_MODE_GPIO,
.gpio55 = GPIO_MODE_GPIO,
.gpio56 = GPIO_MODE_NATIVE,
.gpio57 = GPIO_MODE_GPIO,
.gpio58 = GPIO_MODE_NATIVE,
.gpio59 = GPIO_MODE_NATIVE,
.gpio60 = GPIO_MODE_GPIO,
.gpio61 = GPIO_MODE_NATIVE,
.gpio62 = GPIO_MODE_NATIVE,
.gpio63 = GPIO_MODE_NATIVE,
};
static const struct pch_gpio_set2 pch_gpio_set2_direction = {
.gpio34 = GPIO_DIR_OUTPUT,
.gpio37 = GPIO_DIR_OUTPUT,
.gpio46 = GPIO_DIR_OUTPUT,
.gpio49 = GPIO_DIR_INPUT,
.gpio50 = GPIO_DIR_OUTPUT,
.gpio51 = GPIO_DIR_OUTPUT,
.gpio52 = GPIO_DIR_OUTPUT,
.gpio53 = GPIO_DIR_OUTPUT,
.gpio54 = GPIO_DIR_OUTPUT,
.gpio55 = GPIO_DIR_OUTPUT,
.gpio57 = GPIO_DIR_INPUT,
.gpio60 = GPIO_DIR_OUTPUT,
};
static const struct pch_gpio_set2 pch_gpio_set2_level = {
.gpio34 = GPIO_LEVEL_HIGH,
.gpio37 = GPIO_LEVEL_LOW,
.gpio46 = GPIO_LEVEL_HIGH,
.gpio50 = GPIO_LEVEL_HIGH,
.gpio51 = GPIO_LEVEL_LOW,
.gpio52 = GPIO_LEVEL_HIGH,
.gpio53 = GPIO_LEVEL_HIGH,
.gpio54 = GPIO_LEVEL_HIGH,
.gpio55 = GPIO_LEVEL_LOW,
.gpio60 = GPIO_LEVEL_HIGH,
};
static const struct pch_gpio_set2 pch_gpio_set2_reset = {
};
static const struct pch_gpio_set3 pch_gpio_set3_mode = {
.gpio64 = GPIO_MODE_NATIVE,
.gpio65 = GPIO_MODE_NATIVE,
.gpio66 = GPIO_MODE_GPIO,
.gpio67 = GPIO_MODE_GPIO,
.gpio68 = GPIO_MODE_GPIO,
.gpio69 = GPIO_MODE_GPIO,
.gpio70 = GPIO_MODE_NATIVE,
.gpio71 = GPIO_MODE_NATIVE,
.gpio72 = GPIO_MODE_NATIVE,
.gpio73 = GPIO_MODE_NATIVE,
.gpio74 = GPIO_MODE_NATIVE,
.gpio75 = GPIO_MODE_NATIVE,
};
static const struct pch_gpio_set3 pch_gpio_set3_direction = {
.gpio66 = GPIO_DIR_OUTPUT,
.gpio67 = GPIO_DIR_INPUT,
.gpio68 = GPIO_DIR_OUTPUT,
.gpio69 = GPIO_DIR_INPUT,
};
static const struct pch_gpio_set3 pch_gpio_set3_level = {
.gpio66 = GPIO_LEVEL_LOW,
.gpio68 = GPIO_LEVEL_HIGH,
};
static const struct pch_gpio_set3 pch_gpio_set3_reset = {
};
const struct pch_gpio_map mainboard_gpio_map = {
.set1 = {
.mode = &pch_gpio_set1_mode,
.direction = &pch_gpio_set1_direction,
.level = &pch_gpio_set1_level,
.blink = &pch_gpio_set1_blink,
.invert = &pch_gpio_set1_invert,
.reset = &pch_gpio_set1_reset,
},
.set2 = {
.mode = &pch_gpio_set2_mode,
.direction = &pch_gpio_set2_direction,
.level = &pch_gpio_set2_level,
.reset = &pch_gpio_set2_reset,
},
.set3 = {
.mode = &pch_gpio_set3_mode,
.direction = &pch_gpio_set3_direction,
.level = &pch_gpio_set3_level,
.reset = &pch_gpio_set3_reset,
},
};