GNUBoot/coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
coreboot-kgpe-d16/src/mainboard/pcengines/apu2/gpio_ftns.h

57 lines
2 KiB
C
Raw Normal View History

mainboard/pcengines: Use SPDX for GPL-2.0-only files Done with sed and God Lines. Only done for C-like code for now. Change-Id: I64f620205d79b0c4f9a111881b04ac955aecdd91 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-04-03 01:22:52 +02:00
/* SPDX-License-Identifier: GPL-2.0-only */
/* This file is part of the coreboot project. */
pcengines/apu2: add board support Initial work based on db-ft3b-ls and code released by Eltan. Board boots with some limitation. Now the AGESA binary is harcoded and board specific until it's fixed by the SoC vendor. memtest86+ from external repo skips looking for SPD on SMBus, which when performed cause memtest86+ to hang. Still didn't tried whole test suit. SeaBIOS 1.9.3 have some problems with USB which lead to no booting in some cases. Full log: https://gist.github.com/pietrushnic/787cbf63f610ff4f6b4ac13e5c20b872 SeaBIOS from PC Engines repository (https://github.com/pcengines/seabios) works fine. Those changes are planned for upstream. Information about obtaining and booting Voyage Linux: https://github.com/pcengines/apu2-documentation#building-firmware-using-apu2-image-builder Change-Id: Id23e448e27f4bba47b7e9e7fa7679e2690c6e4bc Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/14138 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-05-27 12:04:13 +02:00
#ifndef GPIO_FTNS_H
#define GPIO_FTNS_H
mb/*/*: use ACPIMMIO common block wherever possible TEST=boot PC Engines apu2 and launch Debian Linux Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I648167ec94367c9494c4253bec21dab20ad7b615 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-12-01 17:42:04 +01:00
void configure_gpio(u8 iomux_gpio, u8 iomux_ftn, u32 gpio, u32 setting);
mb/pcengines/apu2: turn LED 2 and LED 3 off in final stage Due to vendor's requirements LED 2 and LED 3 should be turned off in late boot process. Add appropriate functions to read and write GPIO status. Change-Id: Ia286ef7d02cfcefacf0e8d358847406efe1496fb Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/27729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-30 12:31:00 +02:00
u8 read_gpio(u32 gpio);
void write_gpio(u32 gpio, u8 value);
pcengines/apu2: Refactor reading memory strap Change-Id: Ie4f80619d9417200a007fc65154b97a5bc05f2f8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18152 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-16 18:58:53 +01:00
int get_spd_offset(void);
pcengines/apu2: add board support Initial work based on db-ft3b-ls and code released by Eltan. Board boots with some limitation. Now the AGESA binary is harcoded and board specific until it's fixed by the SoC vendor. memtest86+ from external repo skips looking for SPD on SMBus, which when performed cause memtest86+ to hang. Still didn't tried whole test suit. SeaBIOS 1.9.3 have some problems with USB which lead to no booting in some cases. Full log: https://gist.github.com/pietrushnic/787cbf63f610ff4f6b4ac13e5c20b872 SeaBIOS from PC Engines repository (https://github.com/pcengines/seabios) works fine. Those changes are planned for upstream. Information about obtaining and booting Voyage Linux: https://github.com/pcengines/apu2-documentation#building-firmware-using-apu2-image-builder Change-Id: Id23e448e27f4bba47b7e9e7fa7679e2690c6e4bc Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/14138 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-05-27 12:04:13 +02:00
#define IOMUX_OFFSET 0xD00
#define GPIO_OFFSET 0x1500
//
mainboard/pcengines/apu2: add apu3 and apu5 variants Apu3 and apu5 are additional variants of apu2 board. Apu3 has no LPC connector exposed, but has additional USB header. It has also 2 slots for SIM cards and one of the gpios is used to control switching between them. Apu5 is differing by having 6 SIM card slots (3 SIMSWAP switches). This patch adds support for those other variants by not introducing additional code redundancy. Change-Id: I4fded98fed7a8085062cdea035ecac3d608cd2a0 Signed-off-by: Kamil Wcislo <kamil.wcislo@3mdeb.com> Reviewed-on: https://review.coreboot.org/21981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-10-12 11:55:16 +02:00
// Based on PC Engines APU2C and APU3A schematics
pcengines/apu2: add board support Initial work based on db-ft3b-ls and code released by Eltan. Board boots with some limitation. Now the AGESA binary is harcoded and board specific until it's fixed by the SoC vendor. memtest86+ from external repo skips looking for SPD on SMBus, which when performed cause memtest86+ to hang. Still didn't tried whole test suit. SeaBIOS 1.9.3 have some problems with USB which lead to no booting in some cases. Full log: https://gist.github.com/pietrushnic/787cbf63f610ff4f6b4ac13e5c20b872 SeaBIOS from PC Engines repository (https://github.com/pcengines/seabios) works fine. Those changes are planned for upstream. Information about obtaining and booting Voyage Linux: https://github.com/pcengines/apu2-documentation#building-firmware-using-apu2-image-builder Change-Id: Id23e448e27f4bba47b7e9e7fa7679e2690c6e4bc Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/14138 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-05-27 12:04:13 +02:00
// http://www.pcengines.ch/schema/apu2c.pdf
mainboard/pcengines/apu2: add apu3 and apu5 variants Apu3 and apu5 are additional variants of apu2 board. Apu3 has no LPC connector exposed, but has additional USB header. It has also 2 slots for SIM cards and one of the gpios is used to control switching between them. Apu5 is differing by having 6 SIM card slots (3 SIMSWAP switches). This patch adds support for those other variants by not introducing additional code redundancy. Change-Id: I4fded98fed7a8085062cdea035ecac3d608cd2a0 Signed-off-by: Kamil Wcislo <kamil.wcislo@3mdeb.com> Reviewed-on: https://review.coreboot.org/21981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-10-12 11:55:16 +02:00
// http://www.pcengines.ch/schema/apu3a.pdf
pcengines/apu2: add board support Initial work based on db-ft3b-ls and code released by Eltan. Board boots with some limitation. Now the AGESA binary is harcoded and board specific until it's fixed by the SoC vendor. memtest86+ from external repo skips looking for SPD on SMBus, which when performed cause memtest86+ to hang. Still didn't tried whole test suit. SeaBIOS 1.9.3 have some problems with USB which lead to no booting in some cases. Full log: https://gist.github.com/pietrushnic/787cbf63f610ff4f6b4ac13e5c20b872 SeaBIOS from PC Engines repository (https://github.com/pcengines/seabios) works fine. Those changes are planned for upstream. Information about obtaining and booting Voyage Linux: https://github.com/pcengines/apu2-documentation#building-firmware-using-apu2-image-builder Change-Id: Id23e448e27f4bba47b7e9e7fa7679e2690c6e4bc Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/14138 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-05-27 12:04:13 +02:00
//
mb/pcengines/apu2: change GPIO setting Change GPIO setting to use IOMUX to refer to GPIO by IOMUX register as in BKDG for Family 16h Models 30h-3fh Processor Rev 3.06. Change-Id: Icf4a60acabe65cd7f9985bb3af8bd577764d4196 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/27665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-27 15:59:51 +02:00
#define IOMUX_GPIO_22 0x09 // MODESW (APU5)
mainboard/pcengines/apu2: add apu3 and apu5 variants Apu3 and apu5 are additional variants of apu2 board. Apu3 has no LPC connector exposed, but has additional USB header. It has also 2 slots for SIM cards and one of the gpios is used to control switching between them. Apu5 is differing by having 6 SIM card slots (3 SIMSWAP switches). This patch adds support for those other variants by not introducing additional code redundancy. Change-Id: I4fded98fed7a8085062cdea035ecac3d608cd2a0 Signed-off-by: Kamil Wcislo <kamil.wcislo@3mdeb.com> Reviewed-on: https://review.coreboot.org/21981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-10-12 11:55:16 +02:00
#define IOMUX_GPIO_32 0x59 // MODESW (SIMSWAP2 on APU5)
#define IOMUX_GPIO_33 0x5A // SIMSWAP (SIMSWAP3 on APU5)
pcengines/apu2: add board support Initial work based on db-ft3b-ls and code released by Eltan. Board boots with some limitation. Now the AGESA binary is harcoded and board specific until it's fixed by the SoC vendor. memtest86+ from external repo skips looking for SPD on SMBus, which when performed cause memtest86+ to hang. Still didn't tried whole test suit. SeaBIOS 1.9.3 have some problems with USB which lead to no booting in some cases. Full log: https://gist.github.com/pietrushnic/787cbf63f610ff4f6b4ac13e5c20b872 SeaBIOS from PC Engines repository (https://github.com/pcengines/seabios) works fine. Those changes are planned for upstream. Information about obtaining and booting Voyage Linux: https://github.com/pcengines/apu2-documentation#building-firmware-using-apu2-image-builder Change-Id: Id23e448e27f4bba47b7e9e7fa7679e2690c6e4bc Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/14138 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-05-27 12:04:13 +02:00
#define IOMUX_GPIO_49 0x40 // STRAP0
#define IOMUX_GPIO_50 0x41 // STRAP1
mainboard/pcengines/apu2: add apu3 and apu5 variants Apu3 and apu5 are additional variants of apu2 board. Apu3 has no LPC connector exposed, but has additional USB header. It has also 2 slots for SIM cards and one of the gpios is used to control switching between them. Apu5 is differing by having 6 SIM card slots (3 SIMSWAP switches). This patch adds support for those other variants by not introducing additional code redundancy. Change-Id: I4fded98fed7a8085062cdea035ecac3d608cd2a0 Signed-off-by: Kamil Wcislo <kamil.wcislo@3mdeb.com> Reviewed-on: https://review.coreboot.org/21981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-10-12 11:55:16 +02:00
#define IOMUX_GPIO_51 0x42 // PE3 Reset (SIM1 Reset on APU5)
#define IOMUX_GPIO_55 0x43 // PE4 Reset (SIM2 Reset on APU5)
pcengines/apu2: add board support Initial work based on db-ft3b-ls and code released by Eltan. Board boots with some limitation. Now the AGESA binary is harcoded and board specific until it's fixed by the SoC vendor. memtest86+ from external repo skips looking for SPD on SMBus, which when performed cause memtest86+ to hang. Still didn't tried whole test suit. SeaBIOS 1.9.3 have some problems with USB which lead to no booting in some cases. Full log: https://gist.github.com/pietrushnic/787cbf63f610ff4f6b4ac13e5c20b872 SeaBIOS from PC Engines repository (https://github.com/pcengines/seabios) works fine. Those changes are planned for upstream. Information about obtaining and booting Voyage Linux: https://github.com/pcengines/apu2-documentation#building-firmware-using-apu2-image-builder Change-Id: Id23e448e27f4bba47b7e9e7fa7679e2690c6e4bc Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/14138 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-05-27 12:04:13 +02:00
#define IOMUX_GPIO_57 0x44 // LED1#
#define IOMUX_GPIO_58 0x45 // LED2#
#define IOMUX_GPIO_59 0x46 // LED3#
mainboard/pcengines/apu2: add apu3 and apu5 variants Apu3 and apu5 are additional variants of apu2 board. Apu3 has no LPC connector exposed, but has additional USB header. It has also 2 slots for SIM cards and one of the gpios is used to control switching between them. Apu5 is differing by having 6 SIM card slots (3 SIMSWAP switches). This patch adds support for those other variants by not introducing additional code redundancy. Change-Id: I4fded98fed7a8085062cdea035ecac3d608cd2a0 Signed-off-by: Kamil Wcislo <kamil.wcislo@3mdeb.com> Reviewed-on: https://review.coreboot.org/21981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-10-12 11:55:16 +02:00
#define IOMUX_GPIO_64 0x47 // PE3_WDIS (SIM3 Reset on APU5)
pcengines/apu2: add board support Initial work based on db-ft3b-ls and code released by Eltan. Board boots with some limitation. Now the AGESA binary is harcoded and board specific until it's fixed by the SoC vendor. memtest86+ from external repo skips looking for SPD on SMBus, which when performed cause memtest86+ to hang. Still didn't tried whole test suit. SeaBIOS 1.9.3 have some problems with USB which lead to no booting in some cases. Full log: https://gist.github.com/pietrushnic/787cbf63f610ff4f6b4ac13e5c20b872 SeaBIOS from PC Engines repository (https://github.com/pcengines/seabios) works fine. Those changes are planned for upstream. Information about obtaining and booting Voyage Linux: https://github.com/pcengines/apu2-documentation#building-firmware-using-apu2-image-builder Change-Id: Id23e448e27f4bba47b7e9e7fa7679e2690c6e4bc Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/14138 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-05-27 12:04:13 +02:00
#define IOMUX_GPIO_66 0x5B // SPKR
mainboard/pcengines/apu2: add apu3 and apu5 variants Apu3 and apu5 are additional variants of apu2 board. Apu3 has no LPC connector exposed, but has additional USB header. It has also 2 slots for SIM cards and one of the gpios is used to control switching between them. Apu5 is differing by having 6 SIM card slots (3 SIMSWAP switches). This patch adds support for those other variants by not introducing additional code redundancy. Change-Id: I4fded98fed7a8085062cdea035ecac3d608cd2a0 Signed-off-by: Kamil Wcislo <kamil.wcislo@3mdeb.com> Reviewed-on: https://review.coreboot.org/21981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-10-12 11:55:16 +02:00
#define IOMUX_GPIO_68 0x48 // PE4_WDIS (SIMSWAP1 on APU5)
pcengines/apu2: add board support Initial work based on db-ft3b-ls and code released by Eltan. Board boots with some limitation. Now the AGESA binary is harcoded and board specific until it's fixed by the SoC vendor. memtest86+ from external repo skips looking for SPD on SMBus, which when performed cause memtest86+ to hang. Still didn't tried whole test suit. SeaBIOS 1.9.3 have some problems with USB which lead to no booting in some cases. Full log: https://gist.github.com/pietrushnic/787cbf63f610ff4f6b4ac13e5c20b872 SeaBIOS from PC Engines repository (https://github.com/pcengines/seabios) works fine. Those changes are planned for upstream. Information about obtaining and booting Voyage Linux: https://github.com/pcengines/apu2-documentation#building-firmware-using-apu2-image-builder Change-Id: Id23e448e27f4bba47b7e9e7fa7679e2690c6e4bc Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/14138 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-05-27 12:04:13 +02:00
#define IOMUX_GPIO_71 0x4D // PROCHOT
mb/pcengines/apu2: change GPIO setting Change GPIO setting to use IOMUX to refer to GPIO by IOMUX register as in BKDG for Family 16h Models 30h-3fh Processor Rev 3.06. Change-Id: Icf4a60acabe65cd7f9985bb3af8bd577764d4196 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/27665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-27 15:59:51 +02:00
#define GPIO_22 0x24 // MODESW (APU5)
mainboard/pcengines/apu2: add apu3 and apu5 variants Apu3 and apu5 are additional variants of apu2 board. Apu3 has no LPC connector exposed, but has additional USB header. It has also 2 slots for SIM cards and one of the gpios is used to control switching between them. Apu5 is differing by having 6 SIM card slots (3 SIMSWAP switches). This patch adds support for those other variants by not introducing additional code redundancy. Change-Id: I4fded98fed7a8085062cdea035ecac3d608cd2a0 Signed-off-by: Kamil Wcislo <kamil.wcislo@3mdeb.com> Reviewed-on: https://review.coreboot.org/21981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-10-12 11:55:16 +02:00
#define GPIO_32 0x164 // MODESW (SIMSWAP2 on APU5)
#define GPIO_33 0x168 // SIMSWAP (SIMSWAP3 on APU5)
pcengines/apu2: add board support Initial work based on db-ft3b-ls and code released by Eltan. Board boots with some limitation. Now the AGESA binary is harcoded and board specific until it's fixed by the SoC vendor. memtest86+ from external repo skips looking for SPD on SMBus, which when performed cause memtest86+ to hang. Still didn't tried whole test suit. SeaBIOS 1.9.3 have some problems with USB which lead to no booting in some cases. Full log: https://gist.github.com/pietrushnic/787cbf63f610ff4f6b4ac13e5c20b872 SeaBIOS from PC Engines repository (https://github.com/pcengines/seabios) works fine. Those changes are planned for upstream. Information about obtaining and booting Voyage Linux: https://github.com/pcengines/apu2-documentation#building-firmware-using-apu2-image-builder Change-Id: Id23e448e27f4bba47b7e9e7fa7679e2690c6e4bc Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/14138 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-05-27 12:04:13 +02:00
#define GPIO_49 0x100 // STRAP0
#define GPIO_50 0x104 // STRAP1
mainboard/pcengines/apu2: add apu3 and apu5 variants Apu3 and apu5 are additional variants of apu2 board. Apu3 has no LPC connector exposed, but has additional USB header. It has also 2 slots for SIM cards and one of the gpios is used to control switching between them. Apu5 is differing by having 6 SIM card slots (3 SIMSWAP switches). This patch adds support for those other variants by not introducing additional code redundancy. Change-Id: I4fded98fed7a8085062cdea035ecac3d608cd2a0 Signed-off-by: Kamil Wcislo <kamil.wcislo@3mdeb.com> Reviewed-on: https://review.coreboot.org/21981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-10-12 11:55:16 +02:00
#define GPIO_51 0x108 // PE3 Reset (SIM1 Reset on APU5)
#define GPIO_55 0x10C // PE4 Reset (SIM2 Reset on APU5)
pcengines/apu2: add board support Initial work based on db-ft3b-ls and code released by Eltan. Board boots with some limitation. Now the AGESA binary is harcoded and board specific until it's fixed by the SoC vendor. memtest86+ from external repo skips looking for SPD on SMBus, which when performed cause memtest86+ to hang. Still didn't tried whole test suit. SeaBIOS 1.9.3 have some problems with USB which lead to no booting in some cases. Full log: https://gist.github.com/pietrushnic/787cbf63f610ff4f6b4ac13e5c20b872 SeaBIOS from PC Engines repository (https://github.com/pcengines/seabios) works fine. Those changes are planned for upstream. Information about obtaining and booting Voyage Linux: https://github.com/pcengines/apu2-documentation#building-firmware-using-apu2-image-builder Change-Id: Id23e448e27f4bba47b7e9e7fa7679e2690c6e4bc Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/14138 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-05-27 12:04:13 +02:00
#define GPIO_57 0x110 // LED1#
#define GPIO_58 0x114 // LED2#
#define GPIO_59 0x118 // LED3#
mainboard/pcengines/apu2: add apu3 and apu5 variants Apu3 and apu5 are additional variants of apu2 board. Apu3 has no LPC connector exposed, but has additional USB header. It has also 2 slots for SIM cards and one of the gpios is used to control switching between them. Apu5 is differing by having 6 SIM card slots (3 SIMSWAP switches). This patch adds support for those other variants by not introducing additional code redundancy. Change-Id: I4fded98fed7a8085062cdea035ecac3d608cd2a0 Signed-off-by: Kamil Wcislo <kamil.wcislo@3mdeb.com> Reviewed-on: https://review.coreboot.org/21981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-10-12 11:55:16 +02:00
#define GPIO_64 0x11C // PE3_WDIS (SIM3 Reset on APU5)
pcengines/apu2: add board support Initial work based on db-ft3b-ls and code released by Eltan. Board boots with some limitation. Now the AGESA binary is harcoded and board specific until it's fixed by the SoC vendor. memtest86+ from external repo skips looking for SPD on SMBus, which when performed cause memtest86+ to hang. Still didn't tried whole test suit. SeaBIOS 1.9.3 have some problems with USB which lead to no booting in some cases. Full log: https://gist.github.com/pietrushnic/787cbf63f610ff4f6b4ac13e5c20b872 SeaBIOS from PC Engines repository (https://github.com/pcengines/seabios) works fine. Those changes are planned for upstream. Information about obtaining and booting Voyage Linux: https://github.com/pcengines/apu2-documentation#building-firmware-using-apu2-image-builder Change-Id: Id23e448e27f4bba47b7e9e7fa7679e2690c6e4bc Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/14138 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-05-27 12:04:13 +02:00
#define GPIO_66 0x16C // SPKR
mainboard/pcengines/apu2: add apu3 and apu5 variants Apu3 and apu5 are additional variants of apu2 board. Apu3 has no LPC connector exposed, but has additional USB header. It has also 2 slots for SIM cards and one of the gpios is used to control switching between them. Apu5 is differing by having 6 SIM card slots (3 SIMSWAP switches). This patch adds support for those other variants by not introducing additional code redundancy. Change-Id: I4fded98fed7a8085062cdea035ecac3d608cd2a0 Signed-off-by: Kamil Wcislo <kamil.wcislo@3mdeb.com> Reviewed-on: https://review.coreboot.org/21981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-10-12 11:55:16 +02:00
#define GPIO_68 0x120 // PE4_WDIS (SIMSWAP1 on APU5)
pcengines/apu2: add board support Initial work based on db-ft3b-ls and code released by Eltan. Board boots with some limitation. Now the AGESA binary is harcoded and board specific until it's fixed by the SoC vendor. memtest86+ from external repo skips looking for SPD on SMBus, which when performed cause memtest86+ to hang. Still didn't tried whole test suit. SeaBIOS 1.9.3 have some problems with USB which lead to no booting in some cases. Full log: https://gist.github.com/pietrushnic/787cbf63f610ff4f6b4ac13e5c20b872 SeaBIOS from PC Engines repository (https://github.com/pcengines/seabios) works fine. Those changes are planned for upstream. Information about obtaining and booting Voyage Linux: https://github.com/pcengines/apu2-documentation#building-firmware-using-apu2-image-builder Change-Id: Id23e448e27f4bba47b7e9e7fa7679e2690c6e4bc Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/14138 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-05-27 12:04:13 +02:00
#define GPIO_71 0x134 // PROCHOT
mb/pcengines/apu2: change GPIO setting Change GPIO setting to use IOMUX to refer to GPIO by IOMUX register as in BKDG for Family 16h Models 30h-3fh Processor Rev 3.06. Change-Id: Icf4a60acabe65cd7f9985bb3af8bd577764d4196 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/27665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-27 15:59:51 +02:00
#define GPIO_OUTPUT_ENABLE BIT23
#define GPIO_OUTPUT_VALUE BIT22
#define GPIO_PULL_DOWN_ENABLE BIT21
#define GPIO_PULL_UP_ENABLE BIT20
#define GPIO_PIN_STS BIT16
pcengines/apu2: add board support Initial work based on db-ft3b-ls and code released by Eltan. Board boots with some limitation. Now the AGESA binary is harcoded and board specific until it's fixed by the SoC vendor. memtest86+ from external repo skips looking for SPD on SMBus, which when performed cause memtest86+ to hang. Still didn't tried whole test suit. SeaBIOS 1.9.3 have some problems with USB which lead to no booting in some cases. Full log: https://gist.github.com/pietrushnic/787cbf63f610ff4f6b4ac13e5c20b872 SeaBIOS from PC Engines repository (https://github.com/pcengines/seabios) works fine. Those changes are planned for upstream. Information about obtaining and booting Voyage Linux: https://github.com/pcengines/apu2-documentation#building-firmware-using-apu2-image-builder Change-Id: Id23e448e27f4bba47b7e9e7fa7679e2690c6e4bc Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/14138 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-05-27 12:04:13 +02:00
#endif /* GPIO_FTNS_H */
Reference in a new issue Copy permalink