2017-08-02 17:28:17 +02:00
|
|
|
/*
|
|
|
|
* This file is part of the coreboot project.
|
|
|
|
*
|
|
|
|
* Copyright (C) 2014 - 2017 Intel Corporation.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; version 2 of the License.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <console/console.h>
|
|
|
|
#include <device/device.h>
|
|
|
|
#include <device/pci.h>
|
|
|
|
#include <device/pci_ids.h>
|
|
|
|
#include <arch/io.h>
|
2019-03-03 07:01:05 +01:00
|
|
|
#include <device/mmio.h>
|
2019-03-01 12:43:02 +01:00
|
|
|
#include <device/pci_ops.h>
|
2017-08-02 17:28:17 +02:00
|
|
|
#include <arch/ioapic.h>
|
|
|
|
#include <arch/acpi.h>
|
|
|
|
#include <cpu/x86/smm.h>
|
|
|
|
#include <bootstate.h>
|
|
|
|
|
|
|
|
#include <soc/lpc.h>
|
|
|
|
#include <soc/pci_devs.h>
|
|
|
|
#include <soc/ramstage.h>
|
|
|
|
#include <soc/iomap.h>
|
|
|
|
#include <soc/pcr.h>
|
|
|
|
#include <soc/p2sb.h>
|
|
|
|
#include <soc/acpi.h>
|
|
|
|
|
|
|
|
#include "chip.h"
|
|
|
|
|
|
|
|
/* PCH-LP redirection entries */
|
|
|
|
#define PCH_LP_REDIR_ETR 120
|
|
|
|
|
|
|
|
/**
|
2018-02-12 12:24:25 +01:00
|
|
|
* Set miscellaneous static southbridge features.
|
2017-08-02 17:28:17 +02:00
|
|
|
*
|
|
|
|
* @param dev PCI device with I/O APIC control registers
|
|
|
|
*/
|
|
|
|
static void pch_enable_ioapic(struct device *dev)
|
|
|
|
{
|
|
|
|
u32 reg32;
|
|
|
|
|
|
|
|
set_ioapic_id((void *)IO_APIC_ADDR, IO_APIC0);
|
|
|
|
|
|
|
|
/* affirm full set of redirection table entries ("write once") */
|
|
|
|
reg32 = io_apic_read((void *)IO_APIC_ADDR, 0x01);
|
|
|
|
|
|
|
|
reg32 &= ~0x00ff0000;
|
|
|
|
reg32 |= (PCH_LP_REDIR_ETR - 1) << 16;
|
|
|
|
|
|
|
|
io_apic_write((void *)IO_APIC_ADDR, 0x01, reg32);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Select Boot Configuration register (0x03) and
|
|
|
|
* use Processor System Bus (0x01) to deliver interrupts.
|
|
|
|
*/
|
|
|
|
io_apic_write((void *)IO_APIC_ADDR, 0x03, 0x01);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control
|
|
|
|
* 0x00 - 0000 = Reserved
|
|
|
|
* 0x01 - 0001 = Reserved
|
|
|
|
* 0x02 - 0010 = Reserved
|
|
|
|
* 0x03 - 0011 = IRQ3
|
|
|
|
* 0x04 - 0100 = IRQ4
|
|
|
|
* 0x05 - 0101 = IRQ5
|
|
|
|
* 0x06 - 0110 = IRQ6
|
|
|
|
* 0x07 - 0111 = IRQ7
|
|
|
|
* 0x08 - 1000 = Reserved
|
|
|
|
* 0x09 - 1001 = IRQ9
|
|
|
|
* 0x0A - 1010 = IRQ10
|
|
|
|
* 0x0B - 1011 = IRQ11
|
|
|
|
* 0x0C - 1100 = IRQ12
|
|
|
|
* 0x0D - 1101 = Reserved
|
|
|
|
* 0x0E - 1110 = IRQ14
|
|
|
|
* 0x0F - 1111 = IRQ15
|
|
|
|
* PIRQ[n]_ROUT[7] - PIRQ Routing Control
|
|
|
|
* 0x80 - The PIRQ is not routed.
|
|
|
|
*/
|
|
|
|
|
2018-05-27 17:40:58 +02:00
|
|
|
static void pch_pirq_init(struct device *dev)
|
2017-08-02 17:28:17 +02:00
|
|
|
{
|
2018-05-27 17:40:58 +02:00
|
|
|
struct device *irq_dev;
|
2017-08-02 17:28:17 +02:00
|
|
|
/* Get the chip configuration */
|
2019-07-13 21:16:25 +02:00
|
|
|
config_t *config = config_of(dev);
|
2017-08-02 17:28:17 +02:00
|
|
|
|
|
|
|
/* Initialize PIRQ Routings */
|
|
|
|
write8((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIRQA_ROUT),
|
|
|
|
config->pirqa_routing);
|
|
|
|
write8((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIRQB_ROUT),
|
|
|
|
config->pirqb_routing);
|
|
|
|
write8((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIRQC_ROUT),
|
|
|
|
config->pirqc_routing);
|
|
|
|
write8((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIRQD_ROUT),
|
|
|
|
config->pirqd_routing);
|
|
|
|
|
|
|
|
write8((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIRQE_ROUT),
|
|
|
|
config->pirqe_routing);
|
|
|
|
write8((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIRQF_ROUT),
|
|
|
|
config->pirqf_routing);
|
|
|
|
write8((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIRQG_ROUT),
|
|
|
|
config->pirqg_routing);
|
|
|
|
write8((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIRQH_ROUT),
|
|
|
|
config->pirqh_routing);
|
|
|
|
|
|
|
|
/* Initialize device's Interrupt Routings */
|
|
|
|
write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR00),
|
|
|
|
config->ir00_routing);
|
|
|
|
write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR01),
|
|
|
|
config->ir01_routing);
|
|
|
|
write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR02),
|
|
|
|
config->ir02_routing);
|
|
|
|
write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR03),
|
|
|
|
config->ir03_routing);
|
|
|
|
write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR04),
|
|
|
|
config->ir04_routing);
|
|
|
|
write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR05),
|
|
|
|
config->ir05_routing);
|
|
|
|
write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR06),
|
|
|
|
config->ir06_routing);
|
|
|
|
write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR07),
|
|
|
|
config->ir07_routing);
|
|
|
|
write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR08),
|
|
|
|
config->ir08_routing);
|
|
|
|
write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR09),
|
|
|
|
config->ir09_routing);
|
|
|
|
write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR10),
|
|
|
|
config->ir10_routing);
|
|
|
|
write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR11),
|
|
|
|
config->ir11_routing);
|
|
|
|
write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR12),
|
|
|
|
config->ir12_routing);
|
|
|
|
|
|
|
|
/* Initialize device's Interrupt Polarity Control */
|
|
|
|
write32((void *)PCH_PCR_ADDRESS(PID_ITSS, PCH_PCR_ITSS_IPC0),
|
|
|
|
config->ipc0);
|
|
|
|
write32((void *)PCH_PCR_ADDRESS(PID_ITSS, PCH_PCR_ITSS_IPC1),
|
|
|
|
config->ipc1);
|
|
|
|
write32((void *)PCH_PCR_ADDRESS(PID_ITSS, PCH_PCR_ITSS_IPC2),
|
|
|
|
config->ipc2);
|
|
|
|
write32((void *)PCH_PCR_ADDRESS(PID_ITSS, PCH_PCR_ITSS_IPC3),
|
|
|
|
config->ipc3);
|
|
|
|
|
|
|
|
for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) {
|
|
|
|
u8 int_pin = 0, int_line = 0;
|
|
|
|
|
|
|
|
if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN);
|
|
|
|
|
|
|
|
switch (int_pin) {
|
|
|
|
case 1: /* INTA# */
|
|
|
|
int_line = config->pirqa_routing;
|
|
|
|
break;
|
|
|
|
case 2: /* INTB# */
|
|
|
|
int_line = config->pirqb_routing;
|
|
|
|
break;
|
|
|
|
case 3: /* INTC# */
|
|
|
|
int_line = config->pirqc_routing;
|
|
|
|
break;
|
|
|
|
case 4: /* INTD# */
|
|
|
|
int_line = config->pirqd_routing;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!int_line)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2018-05-27 17:40:58 +02:00
|
|
|
static void pci_p2sb_read_resources(struct device *dev)
|
2017-08-02 17:28:17 +02:00
|
|
|
{
|
|
|
|
struct resource *res;
|
|
|
|
|
|
|
|
/* Add MMIO resource
|
|
|
|
* Use 0xda as an unused index for PCR BAR.
|
|
|
|
*/
|
|
|
|
res = new_resource(dev, 0xda);
|
|
|
|
res->base = DEFAULT_PCR_BASE;
|
|
|
|
res->size = 16 * 1024 * 1024; /* 16MB PCR config space */
|
|
|
|
res->flags = IORESOURCE_MEM | IORESOURCE_FIXED | IORESOURCE_STORED |
|
|
|
|
IORESOURCE_ASSIGNED;
|
|
|
|
printk(BIOS_DEBUG,
|
|
|
|
"Adding P2SB PCR config space BAR 0x%08lx-0x%08lx.\n",
|
|
|
|
(unsigned long)(res->base),
|
|
|
|
(unsigned long)(res->base + res->size));
|
|
|
|
|
|
|
|
/* Add MMIO resource
|
|
|
|
* Use 0xdb as an unused index for IOAPIC.
|
|
|
|
*/
|
|
|
|
res = new_resource(dev, 0xdb); /* IOAPIC */
|
|
|
|
res->base = IO_APIC_ADDR;
|
|
|
|
res->size = 0x00001000;
|
|
|
|
res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pch_enable_serial_irqs(struct device *dev)
|
|
|
|
{
|
|
|
|
/* Set packet length and toggle silent mode bit for one frame. */
|
|
|
|
pci_write_config8(dev, SERIRQ_CNTL,
|
|
|
|
(1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0));
|
2019-03-06 01:53:33 +01:00
|
|
|
#if !CONFIG(SERIRQ_CONTINUOUS_MODE)
|
2017-08-02 17:28:17 +02:00
|
|
|
pci_write_config8(dev, SERIRQ_CNTL,
|
|
|
|
(1 << 7) | (0 << 6) | ((21 - 17) << 2) | (0 << 0));
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
static void lpc_init(struct device *dev)
|
|
|
|
{
|
|
|
|
printk(BIOS_DEBUG, "pch: lpc_init\n");
|
|
|
|
|
|
|
|
/* Get the base address */
|
|
|
|
|
|
|
|
/* Set the value for PCI command register. */
|
|
|
|
pci_write_config16(dev, PCI_COMMAND,
|
|
|
|
PCI_COMMAND_SPECIAL | PCI_COMMAND_MASTER |
|
|
|
|
PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
|
|
|
|
|
|
|
|
/* Serial IRQ initialization. */
|
|
|
|
pch_enable_serial_irqs(dev);
|
|
|
|
|
|
|
|
/* IO APIC initialization. */
|
|
|
|
pch_enable_ioapic(dev);
|
|
|
|
|
|
|
|
/* Setup the PIRQ. */
|
|
|
|
pch_pirq_init(dev);
|
|
|
|
}
|
|
|
|
|
2018-05-27 17:40:58 +02:00
|
|
|
static void pch_lpc_add_mmio_resources(struct device *dev) { /* TODO */ }
|
2017-08-02 17:28:17 +02:00
|
|
|
|
2018-05-27 17:40:58 +02:00
|
|
|
static void pch_lpc_add_io_resources(struct device *dev)
|
2017-08-02 17:28:17 +02:00
|
|
|
{
|
|
|
|
struct resource *res;
|
|
|
|
u8 io_index = 0;
|
|
|
|
|
|
|
|
/* Add an extra subtractive resource for both memory and I/O. */
|
|
|
|
res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
|
|
|
|
res->base = 0;
|
|
|
|
res->size = 0x1000;
|
|
|
|
res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
|
|
|
|
IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
|
|
|
|
|
|
|
|
res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
|
|
|
|
res->base = 0xff000000;
|
|
|
|
res->size = 0x01000000; /* 16 MB for flash */
|
|
|
|
res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE |
|
|
|
|
IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
|
|
|
|
}
|
|
|
|
|
2018-05-27 17:40:58 +02:00
|
|
|
static void lpc_read_resources(struct device *dev)
|
2017-08-02 17:28:17 +02:00
|
|
|
{
|
|
|
|
/* Get the normal PCI resources of this device. */
|
|
|
|
pci_dev_read_resources(dev);
|
|
|
|
|
|
|
|
/* Add non-standard MMIO resources. */
|
|
|
|
pch_lpc_add_mmio_resources(dev);
|
|
|
|
|
|
|
|
/* Add IO resources. */
|
|
|
|
pch_lpc_add_io_resources(dev);
|
|
|
|
|
|
|
|
/* Add MMIO resource for IOAPIC. */
|
|
|
|
pci_p2sb_read_resources(dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pch_decode_init(struct device *dev) { /* TODO */ }
|
|
|
|
|
2018-05-27 17:40:58 +02:00
|
|
|
static void lpc_enable_resources(struct device *dev)
|
2017-08-02 17:28:17 +02:00
|
|
|
{
|
|
|
|
pch_decode_init(dev);
|
|
|
|
pci_dev_enable_resources(dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Set bit in Function Disable register to hide this device */
|
|
|
|
static void pch_hide_devfn(uint32_t devfn) { /* TODO */ }
|
|
|
|
|
2018-05-27 17:40:58 +02:00
|
|
|
void southcluster_enable_dev(struct device *dev)
|
2017-08-02 17:28:17 +02:00
|
|
|
{
|
|
|
|
u32 reg32;
|
|
|
|
|
|
|
|
if (!dev->enabled) {
|
|
|
|
printk(BIOS_DEBUG, "%s: Disabling device\n", dev_path(dev));
|
|
|
|
|
|
|
|
/* Ensure memory, io, and bus master are all disabled */
|
|
|
|
reg32 = pci_read_config32(dev, PCI_COMMAND);
|
|
|
|
reg32 &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY |
|
|
|
|
PCI_COMMAND_IO);
|
|
|
|
pci_write_config32(dev, PCI_COMMAND, reg32);
|
|
|
|
|
|
|
|
/* Hide this device if possible */
|
|
|
|
pch_hide_devfn(dev->path.pci.devfn);
|
|
|
|
} else {
|
|
|
|
/* Enable SERR */
|
|
|
|
reg32 = pci_read_config32(dev, PCI_COMMAND);
|
|
|
|
reg32 |= PCI_COMMAND_SERR;
|
|
|
|
pci_write_config32(dev, PCI_COMMAND, reg32);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct device_operations device_ops = {
|
|
|
|
.read_resources = lpc_read_resources,
|
|
|
|
.set_resources = pci_dev_set_resources,
|
2019-03-06 01:53:33 +01:00
|
|
|
#if CONFIG(HAVE_ACPI_TABLES)
|
2017-08-02 17:28:17 +02:00
|
|
|
.acpi_inject_dsdt_generator = southcluster_inject_dsdt,
|
|
|
|
.write_acpi_tables = southcluster_write_acpi_tables,
|
|
|
|
#endif
|
|
|
|
.enable_resources = lpc_enable_resources,
|
|
|
|
.init = lpc_init,
|
|
|
|
.enable = southcluster_enable_dev,
|
2019-03-14 16:02:05 +01:00
|
|
|
.scan_bus = scan_static_bus,
|
2017-08-02 17:28:17 +02:00
|
|
|
.ops_pci = &soc_pci_ops,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct pci_driver lpc_driver __pci_driver = {
|
|
|
|
.ops = &device_ops,
|
|
|
|
.vendor = PCI_VENDOR_ID_INTEL,
|
2019-11-22 00:10:20 +01:00
|
|
|
.device = PCI_DEVICE_ID_INTEL_DENVERTON_LPC,
|
2017-08-02 17:28:17 +02:00
|
|
|
};
|
|
|
|
|
|
|
|
static void finalize_chipset(void *unused)
|
|
|
|
{
|
|
|
|
printk(BIOS_DEBUG, "Finalizing SMM.\n");
|
|
|
|
outb(APM_CNT_FINALIZE, APM_CNT);
|
|
|
|
}
|
|
|
|
|
|
|
|
BOOT_STATE_INIT_ENTRY(BS_OS_RESUME, BS_ON_ENTRY, finalize_chipset, NULL);
|
|
|
|
BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_LOAD, BS_ON_EXIT, finalize_chipset, NULL);
|