mb/supermicro/x11ssh: Add Supermicro X11SSH-TF
Add support for the X11SSH-TF which is based on Intel KBL. Working: * SeaBIOS payload * LinuxBoot payload * IPMI of BMC * PCIe, SATA, USB and M.2 ports * RS232 serial * Native graphics init Not working: * TianoCore doesn't work yet as the Aspeed NGI is text mode only. * Intel SGX, due to random crashes in soc/intel/common For more details have a look at the documentation. Please apply those patches as well for good user experience: Ica0c20255f661dd61edc3a7d15646b7447c4658e Signed-off-by: Christian Walter <christian.walter@9elements.com> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Felix Singer <felix.singer@9elements.com> Change-Id: I2edaa4a928de3a065e517c0f20e3302b4b702323 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
This commit is contained in:
parent
fad9536edf
commit
08aa502d79
|
@ -111,6 +111,7 @@ The boards in this section are not real mainboards, but emulators.
|
|||
## Supermicro
|
||||
|
||||
- [X10SLM+-F](supermicro/x10slm-f.md)
|
||||
- [X11SSH-TF](supermicro/x11ssh-tf.md)
|
||||
|
||||
## UP
|
||||
|
||||
|
|
|
@ -0,0 +1,74 @@
|
|||
# Supermicro X11SSH-TF
|
||||
|
||||
This section details how to run coreboot on the [Supermicro X11SSH-TF].
|
||||
|
||||
## Required proprietary blobs
|
||||
|
||||
* [Intel FSP2.0]
|
||||
* Intel ME
|
||||
|
||||
## Flashing coreboot
|
||||
|
||||
The board can be flashed externally using *some* programmers.
|
||||
The CH341 was found working, while Dediprog won't detect the chip.
|
||||
|
||||
For more details have a look at the [flashing tutorial].
|
||||
|
||||
The flash IC can be found between the two PCIe slots near the southbridge:
|
||||
![](x11ssh_flash.jpg)
|
||||
|
||||
## BMC (IPMI)
|
||||
|
||||
This board has an ASPEED [AST2400], which has BMC functionality. The
|
||||
BMC firmware resides in a 32 MiB SOIC-16 chip in the corner of the
|
||||
mainboard near the [AST2400]. This chip is an [MX25L25635F].
|
||||
|
||||
## Known issues
|
||||
|
||||
- Intel SGX causes secondary APs to crash (disabled for now).
|
||||
- Tianocore doesn't work with Aspeed NGI, as it's text mode only.
|
||||
- After S5 resume coreboot detects more DIMMs than installed, causing FSP-M
|
||||
to fail.
|
||||
|
||||
## Tested and working
|
||||
|
||||
- USB ports
|
||||
- M.2 2280 NVMe slot
|
||||
- 2x 10GB Ethernet
|
||||
- SATA
|
||||
- RS232
|
||||
- VGA on Aspeed
|
||||
- Super I/O initialisation
|
||||
- ECC DRAM detection
|
||||
- PCIe slots
|
||||
- TPM on TPM expansion header
|
||||
- BMC (IPMI)
|
||||
|
||||
## Technology
|
||||
|
||||
```eval_rst
|
||||
+------------------+--------------------------------------------------+
|
||||
| CPU | Intel Kaby Lake |
|
||||
+------------------+--------------------------------------------------+
|
||||
| PCH | Intel C236 |
|
||||
+------------------+--------------------------------------------------+
|
||||
| Super I/O | ASPEED AST2400 |
|
||||
+------------------+--------------------------------------------------+
|
||||
| Coprocessor | Intel SPS (server version of the ME) |
|
||||
+------------------+--------------------------------------------------+
|
||||
| Coprocessor | ASPEED AST2400 |
|
||||
+------------------+--------------------------------------------------+
|
||||
```
|
||||
|
||||
## Extra links
|
||||
|
||||
- [Board manual]
|
||||
|
||||
[AST2400]: https://www.aspeedtech.com/products.php?fPath=20&rId=376
|
||||
[Board manual]: https://www.supermicro.com/manuals/motherboard/C236/MNL-1783.pdf
|
||||
[flashrom]: https://flashrom.org/Flashrom
|
||||
[MX25L25635F]: https://media.digikey.com/pdf/Data%20Sheets/Macronix/MX25L25635F.pdf
|
||||
[N25Q128A]: https://www.micron.com/~/media/Documents/Products/Data%20Sheet/NOR%20Flash/Serial%20NOR/N25Q/n25q_128mb_3v_65nm.pdf
|
||||
[flashing tutorial]: ../../flash_tutorial/ext_power.md
|
||||
[Intel FSP2.0]: ../../soc/intel/fsp/index.md
|
||||
[Supermicro X11SSH-TF]: https://www.supermicro.com/en/products/motherboard/X11SSH-TF
|
Binary file not shown.
After Width: | Height: | Size: 135 KiB |
|
@ -0,0 +1,79 @@
|
|||
config BOARD_SUPERMICRO_BASEBOARD_X11SSH
|
||||
def_bool n
|
||||
select BOARD_ROMSIZE_KB_16384
|
||||
select HAVE_ACPI_RESUME
|
||||
select HAVE_ACPI_TABLES
|
||||
select HAVE_OPTION_TABLE
|
||||
select SOC_INTEL_KABYLAKE
|
||||
select SKYLAKE_SOC_PCH_H
|
||||
select MAINBOARD_HAS_LPC_TPM
|
||||
select DRIVERS_ASPEED_AST2050
|
||||
select SUPERIO_ASPEED_AST2400
|
||||
select GENERATE_SMBIOS_TABLES
|
||||
select IPMI_KCS
|
||||
|
||||
if BOARD_SUPERMICRO_BASEBOARD_X11SSH
|
||||
|
||||
config VBOOT
|
||||
select VBOOT_NO_BOARD_SUPPORT
|
||||
select GBB_FLAG_DISABLE_LID_SHUTDOWN
|
||||
select GBB_FLAG_DISABLE_PD_SOFTWARE_SYNC
|
||||
select GBB_FLAG_DISABLE_EC_SOFTWARE_SYNC
|
||||
select GBB_FLAG_DISABLE_FWMP
|
||||
|
||||
config VBOOT_SLOTS_RW_AB
|
||||
default y
|
||||
|
||||
config VBOOT_VBNV_OFFSET
|
||||
hex
|
||||
default 0x2a
|
||||
|
||||
config FMDFILE
|
||||
string
|
||||
default "src/mainboard/$(CONFIG_MAINBOARD_DIR)/vboot-ro-rwab.fmd" if VBOOT_SLOTS_RW_AB
|
||||
|
||||
config CBFS_SIZE
|
||||
hex
|
||||
default 0x009aa000 if !VBOOT
|
||||
|
||||
config IRQ_SLOT_COUNT
|
||||
int
|
||||
default 18
|
||||
|
||||
config MAINBOARD_DIR
|
||||
string
|
||||
default "supermicro/x11ssh"
|
||||
|
||||
config VARIANT_DIR
|
||||
string
|
||||
default "tf" if BOARD_SUPERMICRO_X11SSH_PLUS_TF
|
||||
|
||||
config DEVICETREE
|
||||
string
|
||||
default "variants/$(CONFIG_VARIANT_DIR)/devicetree.cb"
|
||||
|
||||
config MAINBOARD_PART_NUMBER
|
||||
string
|
||||
default "X11SSH-TF" if BOARD_SUPERMICRO_X11SSH_PLUS_TF
|
||||
|
||||
config MAX_CPUS
|
||||
int
|
||||
default 8
|
||||
|
||||
config SUBSYSTEM_VENDOR_ID
|
||||
hex
|
||||
default 0x8086
|
||||
|
||||
config CONSOLE_POST
|
||||
bool
|
||||
default y
|
||||
|
||||
config POST_DEVICE
|
||||
bool
|
||||
default n
|
||||
|
||||
config DIMM_SPD_SIZE
|
||||
int
|
||||
default 512
|
||||
|
||||
endif # BOARD_SUPERMICRO_BASEBOARD_X11SSH
|
|
@ -0,0 +1,3 @@
|
|||
config BOARD_SUPERMICRO_X11SSH_PLUS_TF
|
||||
bool "X11SSH+-TF"
|
||||
select BOARD_SUPERMICRO_BASEBOARD_X11SSH
|
|
@ -0,0 +1,22 @@
|
|||
##
|
||||
## This file is part of the coreboot project.
|
||||
##
|
||||
## Copyright (C) 2013 Google Inc.
|
||||
## Copyright (C) 2016 Intel Corporation.
|
||||
##
|
||||
## This program is free software; you can redistribute it and/or modify
|
||||
## it under the terms of the GNU General Public License as published by
|
||||
## the Free Software Foundation; version 2 of the License.
|
||||
##
|
||||
## This program is distributed in the hope that it will be useful,
|
||||
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
## GNU General Public License for more details.
|
||||
##
|
||||
|
||||
bootblock-y += bootblock.c
|
||||
|
||||
ramstage-y += ramstage.c
|
||||
|
||||
subdirs-y += variants/$(VARIANT_DIR)
|
||||
CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/variants/$(VARIANT_DIR)/include
|
|
@ -0,0 +1,6 @@
|
|||
Vendor name: Supermicro
|
||||
Board name: X11SSH Baseboard
|
||||
Category: server
|
||||
ROM protocol: SPI
|
||||
ROM socketed: n
|
||||
Flashrom support: y
|
|
@ -0,0 +1,48 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright 2016 Google Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <bootblock_common.h>
|
||||
#include <soc/gpio.h>
|
||||
#include "gpio.h"
|
||||
#include <superio/aspeed/common/aspeed.h>
|
||||
#include <superio/aspeed/ast2400/ast2400.h>
|
||||
#include <delay.h>
|
||||
#include <console/uart.h>
|
||||
|
||||
static void early_config_gpio(void)
|
||||
{
|
||||
/* This is a hack for FSP because it does things in MemoryInit()
|
||||
* which it shouldn't do. We have to prepare certain gpios here
|
||||
* because of the brokenness in FSP. */
|
||||
gpio_configure_pads(early_gpio_table, ARRAY_SIZE(early_gpio_table));
|
||||
}
|
||||
|
||||
static void early_config_superio(void)
|
||||
{
|
||||
const pnp_devfn_t serial_dev = PNP_DEV(0x2e, AST2400_SUART1);
|
||||
if (CONFIG(CONSOLE_SERIAL)) {
|
||||
aspeed_enable_serial(serial_dev, CONFIG_TTYS0_BASE);
|
||||
/* The serial output is garbeled before this timeout.
|
||||
* FIXME: Find out why and remove delay.
|
||||
*/
|
||||
mdelay(1000);
|
||||
}
|
||||
}
|
||||
|
||||
void bootblock_mainboard_early_init(void)
|
||||
{
|
||||
early_config_gpio();
|
||||
early_config_superio();
|
||||
}
|
|
@ -0,0 +1,62 @@
|
|||
##
|
||||
## This file is part of the coreboot project.
|
||||
##
|
||||
## Copyright (C) 2007-2008 coresystems GmbH
|
||||
##
|
||||
## This program is free software; you can redistribute it and/or modify
|
||||
## it under the terms of the GNU General Public License as published by
|
||||
## the Free Software Foundation; version 2 of the License.
|
||||
##
|
||||
## This program is distributed in the hope that it will be useful,
|
||||
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
## GNU General Public License for more details.
|
||||
##
|
||||
|
||||
# -----------------------------------------------------------------
|
||||
entries
|
||||
|
||||
#start-bit length config config-ID name
|
||||
|
||||
0 120 r 0 reserved_memory
|
||||
|
||||
# -----------------------------------------------------------------
|
||||
# RTC_BOOT_BYTE (coreboot hardcoded)
|
||||
384 1 e 4 boot_option
|
||||
388 4 h 0 reboot_counter
|
||||
|
||||
# -----------------------------------------------------------------
|
||||
# coreboot config options: console
|
||||
395 4 e 6 debug_level
|
||||
448 128 r 0 vbnv
|
||||
|
||||
# coreboot config options: check sums
|
||||
984 16 h 0 check_sum
|
||||
|
||||
# -----------------------------------------------------------------
|
||||
|
||||
enumerations
|
||||
|
||||
#ID value text
|
||||
1 0 Disable
|
||||
1 1 Enable
|
||||
2 0 Enable
|
||||
2 1 Disable
|
||||
4 0 Fallback
|
||||
4 1 Normal
|
||||
6 0 Emergency
|
||||
6 1 Alert
|
||||
6 2 Critical
|
||||
6 3 Error
|
||||
6 4 Warning
|
||||
6 5 Notice
|
||||
6 6 Info
|
||||
6 7 Debug
|
||||
6 8 Spew
|
||||
7 0 Disable
|
||||
7 1 Enable
|
||||
7 2 Keep
|
||||
# -----------------------------------------------------------------
|
||||
checksums
|
||||
|
||||
checksum 392 415 984
|
|
@ -0,0 +1,50 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2007-2009 coresystems GmbH
|
||||
* Copyright (C) 2015 Google Inc.
|
||||
* Copyright (C) 2016 Intel Corporation
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <arch/acpi.h>
|
||||
DefinitionBlock(
|
||||
"dsdt.aml",
|
||||
"DSDT",
|
||||
0x02, // DSDT revision: ACPI v2.0 and up
|
||||
OEM_ID,
|
||||
ACPI_TABLE_CREATOR,
|
||||
0x20110725 // OEM revision
|
||||
)
|
||||
{
|
||||
// Some generic macros
|
||||
#include <soc/intel/skylake/acpi/platform.asl>
|
||||
|
||||
// global NVS and variables
|
||||
#include <soc/intel/skylake/acpi/globalnvs.asl>
|
||||
|
||||
// CPU
|
||||
#include <cpu/intel/common/acpi/cpu.asl>
|
||||
|
||||
Scope (\_SB) {
|
||||
Device (PCI0)
|
||||
{
|
||||
#include <soc/intel/skylake/acpi/systemagent.asl>
|
||||
#include <soc/intel/skylake/acpi/pch.asl>
|
||||
}
|
||||
}
|
||||
|
||||
// Chipset specific sleep states
|
||||
#include <soc/intel/skylake/acpi/sleepstates.asl>
|
||||
|
||||
// Mainboard specific
|
||||
#include "acpi/mainboard.asl"
|
||||
}
|
|
@ -0,0 +1,248 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2018 Intel Corporation.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#ifndef _GPIOX11SSHTF_H
|
||||
#define _GPIOX11SSHTF_H
|
||||
|
||||
#include <soc/gpe.h>
|
||||
#include <soc/gpio.h>
|
||||
|
||||
#ifndef __ACPI__
|
||||
static const struct pad_config gpio_table[] = {
|
||||
/* RCIN# */ _PAD_CFG_STRUCT(GPP_A0, 0x44000702, 0x00000000),
|
||||
/* LAD0 */ _PAD_CFG_STRUCT(GPP_A1, 0x44000702, 0x00000000),
|
||||
/* LAD1 */ _PAD_CFG_STRUCT(GPP_A2, 0x44000700, 0x00000000),
|
||||
/* LAD2 */ _PAD_CFG_STRUCT(GPP_A3, 0x44000702, 0x00000000),
|
||||
/* LAD3 */ _PAD_CFG_STRUCT(GPP_A4, 0x44000700, 0x00000000),
|
||||
/* LFRAME# */ _PAD_CFG_STRUCT(GPP_A5, 0x44000700, 0x00000000),
|
||||
/* SERIRQ */ _PAD_CFG_STRUCT(GPP_A6, 0x44000700, 0x00000000),
|
||||
/* PIRQA# */ _PAD_CFG_STRUCT(GPP_A7, 0x44000702, 0x00000000),
|
||||
/* CLKRUN# */ _PAD_CFG_STRUCT(GPP_A8, 0x44000700, 0x00000000),
|
||||
/* CLKOUT_LPC0 */ _PAD_CFG_STRUCT(GPP_A9, 0x44000700, 0x00000000),
|
||||
/* CLKOUT_LPC1 */ _PAD_CFG_STRUCT(GPP_A10, 0x44000700, 0x00000000),
|
||||
/* PME# */ _PAD_CFG_STRUCT(GPP_A11, 0x44000702, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_A12, 0x80080201, 0x00000000),
|
||||
/* SUSWARN# */ _PAD_CFG_STRUCT(GPP_A13, 0x44000700, 0x00000000),
|
||||
/* SUS_STAT# */ _PAD_CFG_STRUCT(GPP_A14, 0x44000700, 0x00000000),
|
||||
/* SUS_ACK# */ _PAD_CFG_STRUCT(GPP_A15, 0x44000702, 0x00000000),
|
||||
/* CLKOUT_48 */ _PAD_CFG_STRUCT(GPP_A16, 0x44000700, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_A17, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_A18, 0x84000100, 0x00000000),
|
||||
/* RESERVED */ //_PAD_CFG_STRUCT(GPP_A19, 0xffffffff, 0xffffff00),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_A20, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_A21, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_A22, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_A23, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_B0, 0x44000201, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_B1, 0x44000201, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_B2, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_B3, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_B4, 0x44000301, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_B5, 0x44000301, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_B6, 0x84000301, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_B7, 0x44000301, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_B8, 0x44000301, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_B9, 0x44000301, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_B10, 0x44000301, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_B11, 0x44000200, 0x00000000),
|
||||
/* SLP_S0# */ _PAD_CFG_STRUCT(GPP_B12, 0x44000700, 0x00000000),
|
||||
/* PLTRST# */ _PAD_CFG_STRUCT(GPP_B13, 0x44000700, 0x00000000),
|
||||
/* SPKR */ _PAD_CFG_STRUCT(GPP_B14, 0x84000700, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_B15, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_B16, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_B17, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_B18, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_B19, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_B20, 0x84000201, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_B21, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_B22, 0x44000300, 0x00000000),
|
||||
/* PCHHOT# */ _PAD_CFG_STRUCT(GPP_B23, 0x40000b00, 0x00000000),
|
||||
/* RESERVED */ //_PAD_CFG_STRUCT(GPP_C0, 0xffffffff, 0xffffff00),
|
||||
/* RESERVED */ //_PAD_CFG_STRUCT(GPP_C1, 0xffffffff, 0xffffff00),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_C2, 0x44000300, 0x00000000),
|
||||
/* RESERVED */ //_PAD_CFG_STRUCT(GPP_C3, 0xffffffff, 0xffffff00),
|
||||
/* RESERVED */ //_PAD_CFG_STRUCT(GPP_C4, 0xffffffff, 0xffffff00),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_C5, 0x44000201, 0x00000000),
|
||||
/* RESERVED */ //_PAD_CFG_STRUCT(GPP_C6, 0xffffffff, 0xffffff00),
|
||||
/* RESERVED */ //_PAD_CFG_STRUCT(GPP_C7, 0xffffffff, 0xffffff00),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_C8, 0x84000102, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_C9, 0x84000100, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_C10, 0x84000102, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_C11, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_C12, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_C13, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_C14, 0x84000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_C15, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_C16, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_C17, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_C18, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_C19, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_C20, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_C21, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_C22, 0x42040102, 0x00003000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_C23, 0x84000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_D0, 0x84000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_D1, 0x44000201, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_D2, 0x42020102, 0x00003000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_D3, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_D4, 0x84000200, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_D5, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_D6, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_D7, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_D8, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_D9, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_D10, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_D11, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_D12, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_D13, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_D14, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_D15, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_D16, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_D17, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_D18, 0x84000201, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_D19, 0x84000201, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_D20, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_D21, 0x44000200, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_D22, 0x04000102, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_D23, 0x44000300, 0x00000000),
|
||||
/* SATAXPCIE0 */ _PAD_CFG_STRUCT(GPP_E0, 0x44000502, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_E1, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_E2, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_E3, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_E4, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_E5, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_E6, 0x82020102, 0x00003000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_E7, 0x44000300, 0x00000000),
|
||||
/* SATA_LED# */ _PAD_CFG_STRUCT(GPP_E8, 0x44000700, 0x00000000),
|
||||
/* USB_OC0# */ _PAD_CFG_STRUCT(GPP_E9, 0x44000702, 0x00000000),
|
||||
/* USB_OC1# */ _PAD_CFG_STRUCT(GPP_E10, 0x44000702, 0x00000000),
|
||||
/* USB_OC2# */ _PAD_CFG_STRUCT(GPP_E11, 0x44000702, 0x00000000),
|
||||
/* USB_OC3# */ _PAD_CFG_STRUCT(GPP_E12, 0x44000702, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_F0, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_F1, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_F2, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_F3, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_F4, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_F5, 0x80100102, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_F6, 0x84000201, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_F7, 0x84000201, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_F8, 0x84000201, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_F9, 0x84000102, 0x00000000),
|
||||
/* SATA_SCLOCK */ _PAD_CFG_STRUCT(GPP_F10, 0x44000700, 0x00000000),
|
||||
/* SATA_SLOAD */ _PAD_CFG_STRUCT(GPP_F11, 0x44000700, 0x00000000),
|
||||
/* SATA_SDATAOUT1 */ _PAD_CFG_STRUCT(GPP_F12, 0x44000700, 0x00000000),
|
||||
/* SATA_SDATAOUT2 */ _PAD_CFG_STRUCT(GPP_F13, 0x44000700, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_F14, 0x44000300, 0x00000000),
|
||||
/* USB_OC4# */ _PAD_CFG_STRUCT(GPP_F15, 0x44000702, 0x00000000),
|
||||
/* USB_OC5# */ _PAD_CFG_STRUCT(GPP_F16, 0x44000702, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_F17, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_F18, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_F19, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_F20, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_F21, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_F22, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_F23, 0x04000200, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_G0, 0x44000100, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_G1, 0x44000100, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_G2, 0x44000102, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_G3, 0x44000102, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_G4, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_G5, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_G6, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_G7, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_G8, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_G9, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_G10, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_G11, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_G12, 0x84000100, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_G13, 0x84000100, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_G14, 0x84000102, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_G15, 0x84000100, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_G16, 0x84000100, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_G17, 0x44000300, 0x00000000),
|
||||
/* NMI# */ _PAD_CFG_STRUCT(GPP_G18, 0x44000700, 0x00000000),
|
||||
/* SMI# */ _PAD_CFG_STRUCT(GPP_G19, 0x44000700, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_G20, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_G21, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_G22, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_G23, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_H0, 0x44000201, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_H1, 0x84000103, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_H2, 0x44000201, 0x00000000),
|
||||
/* SRCCLKREQ9# */ _PAD_CFG_STRUCT(GPP_H3, 0x44000602, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_H4, 0x84000103, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_H5, 0x84000201, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_H6, 0x84000201, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_H7, 0x84000201, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_H8, 0x84000201, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_H9, 0x84000201, 0x00000000),
|
||||
/* SML2CLK */ _PAD_CFG_STRUCT(GPP_H10, 0x44000702, 0x00000000),
|
||||
/* SML2DATA */ _PAD_CFG_STRUCT(GPP_H11, 0x44000702, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_H12, 0x44000300, 0x00000000),
|
||||
/* SML3CLK */ _PAD_CFG_STRUCT(GPP_H13, 0x44000702, 0x00000000),
|
||||
/* SML3DATA */ _PAD_CFG_STRUCT(GPP_H14, 0x44000702, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_H15, 0x44000300, 0x00000000),
|
||||
/* SML4CLK */ _PAD_CFG_STRUCT(GPP_H16, 0x44000702, 0x00000000),
|
||||
/* SML4DATA */ _PAD_CFG_STRUCT(GPP_H17, 0x44000702, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_H18, 0x44000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_H19, 0x84000201, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_H20, 0x84000201, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_H21, 0x84000201, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_H22, 0x84000201, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_H23, 0x84000201, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPD0, 0x04000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPD1, 0x04000300, 0x00000000),
|
||||
/* LAN_WAKE# */ _PAD_CFG_STRUCT(GPD2, 0x04000702, 0x00000000),
|
||||
/* PWRBTN# */ _PAD_CFG_STRUCT(GPD3, 0x04000702, 0x00000000),
|
||||
/* SLP_S3# */ _PAD_CFG_STRUCT(GPD4, 0x04000700, 0x00000000),
|
||||
/* SLP_S4# */ _PAD_CFG_STRUCT(GPD5, 0x04000700, 0x00000000),
|
||||
/* SLP_A# */ _PAD_CFG_STRUCT(GPD6, 0x04000700, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPD7, 0x04000301, 0x00000000),
|
||||
/* SUSCLK */ _PAD_CFG_STRUCT(GPD8, 0x04000700, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPD9, 0x04000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPD10, 0x04000300, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPD11, 0x04000300, 0x00000000),
|
||||
/* DDPB_HPD0 */ _PAD_CFG_STRUCT(GPP_I0, 0x44000700, 0x00000000),
|
||||
/* DDPC_HPD1 */ _PAD_CFG_STRUCT(GPP_I1, 0x44000700, 0x00000000),
|
||||
/* DDPD_HPD2 */ _PAD_CFG_STRUCT(GPP_I2, 0x44000700, 0x00000000),
|
||||
/* DDPE_HPD3 */ _PAD_CFG_STRUCT(GPP_I3, 0x84000700, 0x00000000),
|
||||
/* GPIO */ _PAD_CFG_STRUCT(GPP_I4, 0x44000300, 0x00000000),
|
||||
/* DDPB_CTRLCLK */ _PAD_CFG_STRUCT(GPP_I5, 0x44000700, 0x00000000),
|
||||
/* DDPB_CTRLDATA */ _PAD_CFG_STRUCT(GPP_I6, 0x44000700, 0x00000000),
|
||||
/* DDPC_CTRLCLK */ _PAD_CFG_STRUCT(GPP_I7, 0x44000700, 0x00000000),
|
||||
/* DDPC_CTRLDATA */ _PAD_CFG_STRUCT(GPP_I8, 0x44000700, 0x00000000),
|
||||
/* DDPD_CTRLCLK */ _PAD_CFG_STRUCT(GPP_I9, 0x44000700, 0x00000000),
|
||||
/* DDPD_CTRLDATA */ _PAD_CFG_STRUCT(GPP_I10, 0x44000700, 0x00000000),
|
||||
};
|
||||
|
||||
|
||||
/*** XXX TODO XXX */
|
||||
/* Early pad configuration in romstage. */
|
||||
static const struct pad_config early_gpio_table[] = {
|
||||
/* LPC */
|
||||
|
||||
/* LAD0 */ _PAD_CFG_STRUCT(GPP_A1, 0x44000702, 0x00000000),
|
||||
/* LAD1 */ _PAD_CFG_STRUCT(GPP_A2, 0x44000700, 0x00000000),
|
||||
/* LAD2 */ _PAD_CFG_STRUCT(GPP_A3, 0x44000702, 0x00000000),
|
||||
/* LAD3 */ _PAD_CFG_STRUCT(GPP_A4, 0x44000700, 0x00000000),
|
||||
/* LFRAME# */ _PAD_CFG_STRUCT(GPP_A5, 0x44000700, 0x00000000),
|
||||
/* SERIRQ */ _PAD_CFG_STRUCT(GPP_A6, 0x44000700, 0x00000000),
|
||||
/* CLKRUN# */ _PAD_CFG_STRUCT(GPP_A8, 0x44000700, 0x00000000),
|
||||
/* CLKOUT_LPC0 */ _PAD_CFG_STRUCT(GPP_A9, 0x44000700, 0x00000000),
|
||||
/* CLKOUT_LPC1 */ _PAD_CFG_STRUCT(GPP_A10, 0x44000700, 0x00000000),
|
||||
};
|
||||
|
||||
#endif /* __ACPI__ */
|
||||
#endif /* _GPIOX11SSHTF_H */
|
|
@ -0,0 +1,27 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <bootstate.h>
|
||||
#include <soc/ramstage.h>
|
||||
#include "gpio.h"
|
||||
|
||||
void mainboard_silicon_init_params(FSP_SIL_UPD *params)
|
||||
{
|
||||
/* Configure pads prior to SiliconInit() in case there's any
|
||||
* dependencies during hardware initialization. */
|
||||
gpio_configure_pads(gpio_table, ARRAY_SIZE(gpio_table));
|
||||
params->CdClock = 3;
|
||||
|
||||
/* This must be one, otherwise FSP crashes ... */
|
||||
params->PchHdaVcType = 0x1;
|
||||
}
|
|
@ -0,0 +1,37 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <fsp/api.h>
|
||||
#include <soc/romstage.h>
|
||||
#include <spd_bin.h>
|
||||
|
||||
void mainboard_memory_init_params(FSPM_UPD *mupd)
|
||||
{
|
||||
FSP_M_CONFIG *mem_cfg;
|
||||
mem_cfg = &mupd->FspmConfig;
|
||||
|
||||
struct spd_block blk = {
|
||||
.addr_map = { 0x50, 0x51, 0x52, 0x53, },
|
||||
};
|
||||
|
||||
mem_cfg->DqPinsInterleaved = 1;
|
||||
get_spd_smbus(&blk);
|
||||
mem_cfg->MemorySpdDataLen = blk.len;
|
||||
mem_cfg->MemorySpdPtr00 = (uintptr_t)blk.spd_array[0];
|
||||
mem_cfg->MemorySpdPtr10 = (uintptr_t)blk.spd_array[2];
|
||||
mem_cfg->MemorySpdPtr01 = (uintptr_t)blk.spd_array[1];
|
||||
mem_cfg->MemorySpdPtr11 = (uintptr_t)blk.spd_array[3];
|
||||
mem_cfg->UserBd = BOARD_TYPE_SERVER;
|
||||
|
||||
mupd->FspmTestConfig.DmiVc1 = 1;
|
||||
}
|
|
@ -0,0 +1,6 @@
|
|||
Vendor name: Supermicro
|
||||
Board name: X11SSH-TF
|
||||
Category: server
|
||||
ROM protocol: SPI
|
||||
ROM socketed: n
|
||||
Flashrom support: y
|
|
@ -0,0 +1,290 @@
|
|||
chip soc/intel/skylake
|
||||
|
||||
# Enable deep Sx states
|
||||
register "deep_s5_enable_ac" = "0"
|
||||
register "deep_s5_enable_dc" = "0"
|
||||
register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN"
|
||||
|
||||
# GPE configuration
|
||||
# Note that GPE events called out in ASL code rely on this
|
||||
# route. i.e. If this route changes then the affected GPE
|
||||
# offset bits also need to be changed.
|
||||
register "gpe0_dw0" = "GPP_B"
|
||||
register "gpe0_dw1" = "GPP_D"
|
||||
register "gpe0_dw2" = "GPP_E"
|
||||
|
||||
register "gen1_dec" = "0x007c0a01" # Super IO SWC
|
||||
register "gen2_dec" = "0x000c0ca1" # IPMI KCS
|
||||
register "gen3_dec" = "0x000c03e1" # UART3
|
||||
register "gen4_dec" = "0x000c02e1" # UART4
|
||||
|
||||
# Enable "Intel Speed Shift Technology"
|
||||
register "speed_shift_enable" = "1"
|
||||
|
||||
# FSP Configuration
|
||||
register "SmbusEnable" = "1"
|
||||
register "ScsEmmcEnabled" = "0"
|
||||
register "ScsEmmcHs400Enabled" = "0"
|
||||
register "ScsSdCardEnabled" = "0"
|
||||
register "SkipExtGfxScan" = "1"
|
||||
register "Device4Enable" = "1"
|
||||
register "SaGv" = "SaGv_Disabled"
|
||||
|
||||
# Disable SGX
|
||||
register "sgx_enable" = "0" # SGX is broken in coreboot
|
||||
register "PrmrrSize" = "128 * MiB"
|
||||
|
||||
register "pirqa_routing" = "PCH_IRQ11"
|
||||
register "pirqb_routing" = "PCH_IRQ10"
|
||||
register "pirqc_routing" = "PCH_IRQ11"
|
||||
register "pirqd_routing" = "PCH_IRQ11"
|
||||
register "pirqe_routing" = "PCH_IRQ11"
|
||||
register "pirqf_routing" = "PCH_IRQ11"
|
||||
register "pirqg_routing" = "PCH_IRQ11"
|
||||
register "pirqh_routing" = "PCH_IRQ11"
|
||||
|
||||
# SATA configuration
|
||||
register "SataMode" = "0" # AHCI
|
||||
register "EnableSata" = "1"
|
||||
register "SataSalpSupport" = "1"
|
||||
register "SataPortsEnable" = "{ \
|
||||
[0] = 1, \
|
||||
[1] = 1, \
|
||||
[2] = 1, \
|
||||
[3] = 1, \
|
||||
[4] = 1, \
|
||||
[5] = 1, \
|
||||
[6] = 1, \
|
||||
[7] = 1, \
|
||||
}"
|
||||
|
||||
register "SataPortsDevSlp" = "{\
|
||||
[0] = 0, \
|
||||
[1] = 0, \
|
||||
[2] = 0, \
|
||||
[3] = 0, \
|
||||
[4] = 0, \
|
||||
[5] = 0, \
|
||||
[6] = 0, \
|
||||
[7] = 0, \
|
||||
}"
|
||||
|
||||
# superspeed_inter-chip_supplement (SSIC) disabled
|
||||
register "SsicPortEnable" = "0"
|
||||
|
||||
# USB configuration
|
||||
register "usb2_ports[0]" = "USB2_PORT_MID(OC0)" # USB2/3
|
||||
register "usb2_ports[1]" = "USB2_PORT_MID(OC0)" # USB2/3
|
||||
register "usb2_ports[14]" = "USB2_PORT_MID(OC0)" # ?
|
||||
register "usb2_ports[15]" = "USB2_PORT_MID(OC0)" # ?
|
||||
|
||||
register "usb2_ports[2]" = "USB2_PORT_MID(OC1)" # USB4/5
|
||||
register "usb2_ports[3]" = "USB2_PORT_MID(OC1)" # USB4/5
|
||||
|
||||
register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # USB0/1
|
||||
register "usb2_ports[5]" = "USB2_PORT_MID(OC2)" # USB0/1
|
||||
|
||||
register "usb2_ports[8]" = "USB2_PORT_MID(OC3)" # USB9/10 (USB3.0)
|
||||
register "usb2_ports[12]" = "USB2_PORT_MID(OC3)" # USB9/10 (USB3.0)
|
||||
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)"
|
||||
register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC3)"
|
||||
|
||||
register "usb2_ports[10]" = "USB2_PORT_MID(OC4)" # USB6/7 (USB3.0)
|
||||
register "usb2_ports[11]" = "USB2_PORT_MID(OC4)" # USB6/7 (USB3.0)
|
||||
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC4)"
|
||||
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC4)"
|
||||
|
||||
register "usb2_ports[9]" = "USB2_PORT_MID(OC5)" # USB8 (USB3.0)
|
||||
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC5)"
|
||||
|
||||
register "usb2_ports[13]" = "USB2_PORT_MID(OC_SKIP)" # IPMI USB HUB
|
||||
|
||||
# LPC
|
||||
register "serirq_mode" = "SERIRQ_CONTINUOUS"
|
||||
|
||||
# PCIe configuration
|
||||
# Enable JPCIE1
|
||||
register "PcieRpEnable[0]" = "1"
|
||||
register "PcieRpClkReqSupport[0]" = "0"
|
||||
|
||||
# Enable ASpeed PCI bridge
|
||||
register "PcieRpEnable[2]" = "1"
|
||||
register "PcieRpClkReqSupport[2]" = "0"
|
||||
|
||||
# Enable X550T (10GbE)
|
||||
register "PcieRpEnable[4]" = "1"
|
||||
register "PcieRpClkReqSupport[4]" = "0"
|
||||
|
||||
# Enable M.2
|
||||
register "PcieRpEnable[8]" = "1"
|
||||
register "PcieRpClkReqSupport[8]" = "0"
|
||||
|
||||
# Enabling SLP_S3#, SLP_S4#, SLP_SUS and SLP_A Stretch
|
||||
# SLP_S3 Minimum Assertion Width. Values 0: 60us, 1: 1ms, 2: 50ms, 3: 2s
|
||||
register "PmConfigSlpS3MinAssert" = "0x02"
|
||||
|
||||
# SLP_S4 Minimum Assertion Width. Values 0: default, 1: 1s, 2: 2s, 3: 3s, 4: 4s
|
||||
register "PmConfigSlpS4MinAssert" = "0x04"
|
||||
|
||||
# SLP_SUS Minimum Assertion Width. Values 0: 0ms, 1: 500ms, 2: 1s, 3: 4s
|
||||
register "PmConfigSlpSusMinAssert" = "0x03"
|
||||
|
||||
# SLP_A Minimum Assertion Width. Values 0: 0ms, 1: 4s, 2: 98ms, 3: 2s
|
||||
register "PmConfigSlpAMinAssert" = "0x03"
|
||||
|
||||
# VR Settings Configuration for 4 Domains
|
||||
# ICC_MAX = 0 (Auto)
|
||||
# Voltage limit 1.52V (not used on KBL-S and KBL-DT)
|
||||
# Disable PS4 powerstate in S0ix, thus no package C10 support
|
||||
# psi threshold is using FSP default values
|
||||
register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
|
||||
.vr_config_enable = 1, \
|
||||
.psi1threshold = VR_CFG_AMP(20),
|
||||
.psi2threshold = VR_CFG_AMP(5),
|
||||
.psi3threshold = VR_CFG_AMP(1),
|
||||
.psi3enable = 1, \
|
||||
.psi4enable = 0, \
|
||||
.imon_slope = 0x0, \
|
||||
.imon_offset = 0x0, \
|
||||
.icc_max = 0, \
|
||||
.voltage_limit = 1520 \
|
||||
}"
|
||||
|
||||
register "domain_vr_config[VR_IA_CORE]" = "{
|
||||
.vr_config_enable = 1, \
|
||||
.psi1threshold = VR_CFG_AMP(20),
|
||||
.psi2threshold = VR_CFG_AMP(5),
|
||||
.psi3threshold = VR_CFG_AMP(1),
|
||||
.psi3enable = 1, \
|
||||
.psi4enable = 0, \
|
||||
.imon_slope = 0x0, \
|
||||
.imon_offset = 0x0, \
|
||||
.icc_max = 0, \
|
||||
.voltage_limit = 1520 \
|
||||
}"
|
||||
|
||||
register "domain_vr_config[VR_GT_UNSLICED]" = "{
|
||||
.vr_config_enable = 1, \
|
||||
.psi1threshold = VR_CFG_AMP(20),
|
||||
.psi2threshold = VR_CFG_AMP(5),
|
||||
.psi3threshold = VR_CFG_AMP(1),
|
||||
.psi3enable = 1, \
|
||||
.psi4enable = 0, \
|
||||
.imon_slope = 0x0, \
|
||||
.imon_offset = 0x0, \
|
||||
.icc_max = 0 ,\
|
||||
.voltage_limit = 1520 \
|
||||
}"
|
||||
|
||||
register "domain_vr_config[VR_GT_SLICED]" = "{
|
||||
.vr_config_enable = 1, \
|
||||
.psi1threshold = VR_CFG_AMP(20),
|
||||
.psi2threshold = VR_CFG_AMP(5),
|
||||
.psi3threshold = VR_CFG_AMP(1),
|
||||
.psi3enable = 1, \
|
||||
.psi4enable = 0, \
|
||||
.imon_slope = 0x0, \
|
||||
.imon_offset = 0x0, \
|
||||
.icc_max = 0, \
|
||||
.voltage_limit = 1520 \
|
||||
}"
|
||||
|
||||
# No extra VR mailbox command
|
||||
register "SendVrMbxCmd" = "0"
|
||||
|
||||
# Lock Down
|
||||
register "common_soc_config" = "{
|
||||
.chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
|
||||
}"
|
||||
|
||||
device cpu_cluster 0 on
|
||||
device lapic 0 on end
|
||||
end
|
||||
device domain 0 on
|
||||
device pci 00.0 on end # Host Bridge
|
||||
device pci 01.0 on end # unused
|
||||
device pci 01.1 on
|
||||
smbios_slot_desc "SlotTypePciExpressGen3X8" "SlotLengthShort" "CPU SLOT6 PCI-E 3.0 X8" "SlotDataBusWidth4X"
|
||||
end # PCIE Slot (JPCIE1)
|
||||
device pci 04.0 on end # SA thermal subsystem
|
||||
device pci 14.0 on end # USB xHCI
|
||||
device pci 14.1 off end # USB xDCI (OTG)
|
||||
device pci 14.2 on end # Thermal Subsystem
|
||||
device pci 16.0 on end # Management Engine Interface 1
|
||||
device pci 16.1 on end # Management Engine Interface 2
|
||||
device pci 17.0 on end # SATA
|
||||
device pci 1c.0 on
|
||||
smbios_slot_desc "SlotTypePciExpressGen3X4" "SlotLengthLong" "PCH SLOT4 PCI-E 3.0 X2(IN X4)" "SlotDataBusWidth2X"
|
||||
end # PCI Express Port 1 (Slot JPCIE1)
|
||||
device pci 1c.2 on
|
||||
device pci 00.0 on
|
||||
device pci 00.0 on end # Aspeed 2400 VGA
|
||||
end
|
||||
end # PCI Express Port 3
|
||||
device pci 1c.4 on
|
||||
device pci 00.0 on end # 10GbE
|
||||
device pci 00.1 on end # 10GbE
|
||||
end # PCI Express Port 5
|
||||
device pci 1d.0 on
|
||||
smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2 2280" "SlotDataBusWidth4X"
|
||||
end # PCI Express Port 9
|
||||
device pci 1f.0 on
|
||||
chip drivers/ipmi
|
||||
# On cold boot it takes a while for the BMC to start the IPMI service
|
||||
register "wait_for_bmc" = "1"
|
||||
register "bmc_boot_timeout" = "60"
|
||||
device pnp ca2.0 on end # IPMI KCS
|
||||
end
|
||||
chip superio/common
|
||||
device pnp 2e.0 on
|
||||
chip superio/aspeed/ast2400
|
||||
device pnp 2e.2 on # SUART1
|
||||
io 0x60 = 0x3f8
|
||||
irq 0x70 = 4
|
||||
end
|
||||
device pnp 2e.3 on # SUART2
|
||||
io 0x60 = 0x2f8
|
||||
irq 0x70 = 3
|
||||
end
|
||||
device pnp 2e.4 on # SWC
|
||||
io 0x60 = 0xa00
|
||||
io 0x62 = 0xa10
|
||||
io 0x64 = 0xa20
|
||||
io 0x66 = 0xa30
|
||||
irq 0x70 = 0xb
|
||||
end
|
||||
device pnp 2e.5 on # Keyboard
|
||||
io 0x60 = 0x60
|
||||
io 0x62 = 0x64
|
||||
irq 0x70 = 1
|
||||
irq 0x72 = 0xc
|
||||
end
|
||||
device pnp 2e.7 on # GPIO
|
||||
end
|
||||
device pnp 2e.b on # SUART3
|
||||
io 0x60 = 0x3e8
|
||||
irq 0x70 = 4
|
||||
end
|
||||
device pnp 2e.c on # SUART4
|
||||
io 0x60 = 0x2e8
|
||||
irq 0x70 = 3
|
||||
end
|
||||
device pnp 2e.d on # iLPC2AHB
|
||||
end
|
||||
device pnp 2e.e on # Mailbox
|
||||
io 0x60 = 0xa40
|
||||
irq 0x70 = 0x00
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
chip drivers/pc80/tpm
|
||||
device pnp 0c31.0 on end
|
||||
end
|
||||
end # LPC Interface
|
||||
device pci 1f.1 on end # P2SB
|
||||
device pci 1f.2 on end # Power Management Controller
|
||||
device pci 1f.4 on end # SMBus
|
||||
device pci 1f.5 on end # SPI Controller
|
||||
end
|
||||
end
|
|
@ -0,0 +1,36 @@
|
|||
FLASH 16M {
|
||||
SI_ALL@0x0 0x500000 {
|
||||
SI_DESC@0x0 0x1000
|
||||
SI_ME@0x1000 0x4ff000
|
||||
}
|
||||
SI_BIOS@0x500000 0xb00000 {
|
||||
RW_SECTION_A@0x0 0x33e000 {
|
||||
VBLOCK_A@0x0 0x20000
|
||||
FW_MAIN_A(CBFS)@0x20000 0x31dfc0
|
||||
RW_FWID_A@0x33dfc0 0x40
|
||||
}
|
||||
RW_SECTION_B@0x33e000 0x33e000 {
|
||||
VBLOCK_B@0x0 0x20000
|
||||
FW_MAIN_B(CBFS)@0x20000 0x31dfc0
|
||||
RW_FWID_B@0x33dfc0 0x40
|
||||
}
|
||||
MISC_RW@0x67d000 0x62000 {
|
||||
UNIFIED_MRC_CACHE@0x0 0x20000 {
|
||||
RECOVERY_MRC_CACHE@0x0 0x10000
|
||||
RW_MRC_CACHE@0x10000 0x10000
|
||||
}
|
||||
RW_VPD(PRESERVE)@0x20000 0x2000
|
||||
SMMSTORE(PRESERVE)@0x22000 0x40000
|
||||
}
|
||||
WP_RO@0x6df000 0x421000 {
|
||||
RO_VPD(PRESERVE)@0x0 0x4000
|
||||
RO_SECTION@0x4000 0x41d000 {
|
||||
FMAP@0x0 0x800
|
||||
RO_FRID@0x800 0x40
|
||||
RO_FRID_PAD@0x840 0x7c0
|
||||
GBB@0x1000 0xef000
|
||||
COREBOOT(CBFS)@0xf0000 0x32d000
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
Loading…
Reference in New Issue