new epia target for 512k: targets/via/epia/Config.512kflash.lb

buildtarget now takes either a directory, and uses directory/Config.lb, or
takes a file

epia defaults to 256k flash


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1166 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Ronald G. Minnich 2003-10-01 05:42:31 +00:00
parent 320c6a0102
commit 08febd8b67
4 changed files with 116 additions and 5 deletions

View File

@ -17,7 +17,7 @@ uses XIP_ROM_BASE
uses HAVE_MP_TABLE
## ROM_SIZE is the size of boot ROM that this board will use.
default ROM_SIZE 524288
default ROM_SIZE 256*1024
###
### Build options

View File

@ -15,7 +15,7 @@ else
fi
target_dir=$lbpath/targets
config_lb=$1/Config.lb
config_lb=$1
config_dir=$lbpath/util/newconfig
config_py=$config_dir/config.py
@ -26,8 +26,13 @@ fi
cd $target_dir
if [ ! -f $config_lb ]; then
config_lb=$1/Config.lb
fi
if [ ! -f $config_lb ]; then
echo "No target config file found"
echo "Tried both $1 and $config_lb"
exit 1
fi

View File

@ -0,0 +1,109 @@
# Sample config file for Motorola Sandpoint X3 Demo Board with
# the Arima HDAMA
# This will make a target directory of ./hdama
loadoptions
target epia
uses ARCH
uses CONFIG_COMPRESS
uses CONFIG_IOAPIC
uses CONFIG_KEYBOARD
uses CONFIG_ROM_STREAM
uses CONFIG_ROM_STREAM_START
uses CONFIG_UDELAY_TSC
uses CPU_FIXUP
uses FALLBACK_SIZE
uses HAVE_FALLBACK_BOOT
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses HAVE_HARD_RESET
uses i586
uses i686
uses INTEL_PPRO_MTRR
uses HEAP_SIZE
uses IRQ_SLOT_COUNT
uses MAINBOARD_PART_NUMBER
uses MAINBOARD_VENDOR
uses CONFIG_SMP
uses CONFIG_MAX_CPUS
uses MEMORY_HOLE
uses PAYLOAD_SIZE
uses _RAMBASE
uses _ROMBASE
uses ROM_IMAGE_SIZE
uses ROM_SECTION_OFFSET
uses ROM_SECTION_SIZE
uses ROM_SIZE
uses STACK_SIZE
uses USE_FALLBACK_IMAGE
uses USE_OPTION_TABLE
uses HAVE_OPTION_TABLE
uses MAXIMUM_CONSOLE_LOGLEVEL
uses DEFAULT_CONSOLE_LOGLEVEL
uses CONFIG_CONSOLE_SERIAL8250
uses MAINBOARD
uses CONFIG_CHIP_CONFIGURE
uses XIP_ROM_SIZE
uses XIP_ROM_BASE
uses LINUXBIOS_EXTRA_VERSION
option CONFIG_CHIP_CONFIGURE=1
option CONFIG_KEYBOARD=1
option MAXIMUM_CONSOLE_LOGLEVEL=10
option DEFAULT_CONSOLE_LOGLEVEL=10
option CONFIG_CONSOLE_SERIAL8250=1
option CPU_FIXUP=1
option CONFIG_UDELAY_TSC=0
option i686=1
option i586=1
option INTEL_PPRO_MTRR=1
option ROM_SIZE=524288
option HAVE_OPTION_TABLE=1
option CONFIG_ROM_STREAM=1
option HAVE_FALLBACK_BOOT=1
###
### Compute the location and size of where this firmware image
### (linuxBIOS plus bootloader) will live in the boot rom chip.
###
option FALLBACK_SIZE=131072
## LinuxBIOS C code runs at this location in RAM
option _RAMBASE=0x00004000
#
###
### Compute the start location and size size of
### The linuxBIOS bootloader.
###
#
# Arima hdama
romimage "normal"
option USE_FALLBACK_IMAGE=0
option ROM_IMAGE_SIZE=0x10000
option LINUXBIOS_EXTRA_VERSION=".0Normal"
mainboard via/epia
# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
# payload ../../../../tg3--ide_disk.zelf
payload ../../../../../lnxieepro100.ebi
end
romimage "fallback"
option USE_FALLBACK_IMAGE=1
option ROM_IMAGE_SIZE=0x10000
option LINUXBIOS_EXTRA_VERSION=".0Fallback"
mainboard via/epia
# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
# payload ../../../../tg3--ide_disk.zelf
payload ../../../../../lnxieepro100.ebi
end
buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"

View File

@ -62,9 +62,6 @@ option i686=1
option i586=1
option INTEL_PPRO_MTRR=1
option ROM_SIZE=524288
option HAVE_OPTION_TABLE=1
option CONFIG_ROM_STREAM=1
option HAVE_FALLBACK_BOOT=1