amd/pi/hudson: Move oem_fan_control()

It was not intentional to change oem_fan_control() to non-static
with commit
  23e5ba9 binarypi mainboards: Clean up IS_ENABLED fan control

Every platform except bettong had its own static version of
oem_fan_control, so remove the definition of oem_fan_control from imc.h,
and move it out of imc.c into bettong's BiosCallOuts.c.

Change-Id: Ie95ac1fd3a57259bb35796903aa8753ef0e70d70
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/21189
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

src/mainboard/amd/bettong/BiosCallOuts.c

@@ -26,6 +26,7 @@
 #include "imc.h"
 #include "hudson.h"
 #include <stdlib.h>
+#include <string.h>
 #include "northbridge/amd/pi/dimmSpd.h"
 #include "northbridge/amd/pi/agesawrapper.h"
 #include <boardid.h>
@@ -52,6 +53,25 @@ static const GPIO_CONTROL oem_bettong_gpio[] = {
 	{64, Function1, FCH_GPIO_PULL_UP_ENABLE | FCH_GPIO_OUTPUT_VALUE | FCH_GPIO_OUTPUT_ENABLE | DrvStrengthSel_12mA},
 	{-1}
 };
+
+/* Bettong Hardware Monitor Fan Control
+ * Hardware limitation:
+ *  HWM will fail to read the input temperature via I2C if other
+ *  software switches the I2C address.  AMD recommends using IMC
+ *  to control fans, instead of HWM.
+ */
+static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
+{
+	/* Enable IMC fan control. the recommand way */
+	imc_reg_init();
+
+	FchParams->Imc.ImcEnable = TRUE;
+	FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
+	FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC, 1 enable IMC, 0 following hw strap setting */
+
+	memset(&FchParams->Imc.EcStruct, 0, sizeof(FCH_EC));
+}
+
 /**
  * Fch Oem setting callback
  *
@@ -72,6 +92,7 @@ AGESA_STATUS Fch_Oem_config(UINT32 Func, UINTN FchData, VOID *ConfigPtr)
 	} else if (StdHeader->Func == AMD_INIT_ENV) {
 		FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData;
 		printk(BIOS_DEBUG, "Fch OEM config in INIT ENV ");
+
 		if (IS_ENABLED(CONFIG_HUDSON_IMC_FWM))
 			oem_fan_control(FchParams_env);
 

src/mainboard/amd/db-ft3b-lc/BiosCallOuts.c

@@ -123,7 +123,7 @@ static const CODEC_TBL_LIST CodecTableList[] =
  *  software switches the I2C address.  AMD recommends using IMC
  *  to control fans, instead of HWM.
  */
-void oem_fan_control(FCH_DATA_BLOCK *FchParams)
+static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
 {
 	FCH_HWM_FAN_CTR oem_factl[5] = {
 		/*temperature input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */

src/mainboard/amd/lamar/BiosCallOuts.c

@@ -138,7 +138,7 @@ static const CODEC_TBL_LIST CodecTableList[] =
  *  software switches the I2C address.  AMD recommends using IMC
  *  to control fans, instead of HWM.
  */
-void oem_fan_control(FCH_DATA_BLOCK *FchParams)
+static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
 {
 	FCH_HWM_FAN_CTR oem_factl[5] = {
 		/*temperature input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */

src/mainboard/amd/olivehillplus/BiosCallOuts.c

@@ -106,7 +106,7 @@ static const CODEC_TBL_LIST CodecTableList[] =
  *  software switches the I2C address.  AMD recommends using IMC
  *  to control fans, instead of HWM.
  */
-void oem_fan_control(FCH_DATA_BLOCK *FchParams)
+static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
 {
 	FCH_HWM_FAN_CTR oem_factl[5] = {
 		/*temperature input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */

src/mainboard/bap/ode_e21XX/BiosCallOuts.c

@@ -108,7 +108,7 @@ static const CODEC_TBL_LIST CodecTableList[] =
  *  software switches the I2C address.  AMD recommends using IMC
  *  to control fans, instead of HWM.
  */
-void oem_fan_control(FCH_DATA_BLOCK *FchParams)
+static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
 {
 	FCH_HWM_FAN_CTR oem_factl[5] = {
 		/*temperature input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */

src/mainboard/pcengines/apu2/BiosCallOuts.c

@@ -53,7 +53,7 @@ const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
  *  software switches the I2C address.  AMD recommends using IMC
  *  to control fans, instead of HWM.
  */
-void oem_fan_control(FCH_DATA_BLOCK *FchParams)
+static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
 {
 	FchParams->Imc.ImcEnable = FALSE;
 	FchParams->Hwm.HwMonitorEnable = FALSE;

src/southbridge/amd/pi/hudson/imc.c

@@ -81,21 +81,3 @@ void enable_imc_thermal_zone(void)
 	WaitForEcLDN9MailboxCmdAck(&StdHeader);
 }
 #endif
-
-/* Bettong Hardware Monitor Fan Control
- * Hardware limitation:
- *  HWM will fail to read the input temperature via I2C if other
- *  software switches the I2C address.  AMD recommends using IMC
- *  to control fans, instead of HWM.
- */
-void oem_fan_control(FCH_DATA_BLOCK *FchParams)
-{
-	/* Enable IMC fan control. the recommand way */
-	imc_reg_init();
-
-	FchParams->Imc.ImcEnable = TRUE;
-	FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
-	FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC, 1 enable IMC, 0 following hw strap setting */
-
-	LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
-}

src/southbridge/amd/pi/hudson/imc.h

@@ -16,12 +16,7 @@
 #ifndef HUDSON_IMC_H
 #define HUDSON_IMC_H
 
-#include "Porting.h"
-#include "AGESA.h"
-#include <FchCommonCfg.h>
-
 void imc_reg_init(void);
 void enable_imc_thermal_zone(void);
-void oem_fan_control(FCH_DATA_BLOCK *FchParams);
 
 #endif