mb/google/nissa/var/anraggar: Enable ILITEK touchscreen

For proto PCB:
GPP_C0 for enable power supply which also for sensor subsystem.
GPP_C0 must allways turn power on, so GPP_C6 is not only used
for enable function but also for stop report.

BUG=b:304920262
TEST=1. touchscreen function workable
     2. INT pin no active during suspend

Change-Id: I7dabf205dba616f57ef9717f950eba96282d8e3d
Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dolan Liu <liuyong5@huaqin.corp-partner.google.com>
This commit is contained in:
Weimin Wu 2023-11-18 12:03:40 +08:00 committed by Felix Held
parent 0cf76cfabe
commit 10db713100
2 changed files with 8 additions and 3 deletions

View File

@ -71,6 +71,11 @@ static const struct pad_config override_gpio_table[] = {
/* Early pad configuration in bootblock */ /* Early pad configuration in bootblock */
static const struct pad_config early_gpio_table[] = { static const struct pad_config early_gpio_table[] = {
/* C0 : SMBCLK ==> EN_PP3300_TCHSCR_X */
PAD_CFG_GPO(GPP_C0, 1, DEEP),
/* C1 : SMBDATA ==> TCHSCR_RST_L */
PAD_CFG_GPO(GPP_C1, 1, DEEP),
/* H20 : IMGCLKOUT1 ==> WLAN_PERST_L */ /* H20 : IMGCLKOUT1 ==> WLAN_PERST_L */
PAD_CFG_GPO(GPP_H20, 0, DEEP), PAD_CFG_GPO(GPP_H20, 0, DEEP),
/* A13 : GPP_A13 ==> GSC_SOC_INT_ODL */ /* A13 : GPP_A13 ==> GSC_SOC_INT_ODL */

View File

@ -221,10 +221,10 @@ chip soc/intel/alderlake
register "generic.detect" = "1" register "generic.detect" = "1"
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)" register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
register "generic.reset_delay_ms" = "200" register "generic.reset_delay_ms" = "200"
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C6)"
register "generic.enable_delay_ms" = "12" register "generic.enable_delay_ms" = "12"
register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C6)" register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
register "generic.stop_off_delay_ms" = "2" register "generic.stop_off_delay_ms" = "200"
register "generic.has_power_resource" = "1" register "generic.has_power_resource" = "1"
register "hid_desc_reg_offset" = "0x01" register "hid_desc_reg_offset" = "0x01"
device i2c 41 on end device i2c 41 on end