soc/intel/xeon_sp: Move codes to support new PCH

Different PCHs have different definitions for registers. Here create
a lbg folder and move lbg specific codes to this folder so that we
can add new PCH code under xeon_sp folder.

* Create lbg folder and move lbg specific codes from pch.c to soc_pch.c
  under lbg folder.
* Rename lewisburg_pch_gpio_defs.h to gpio_soc_defs.h and move to lbg
  folder.
* Rename gpio.c to soc_gpio.c and move to lbg folder.
* Move pcr_ids.h to lbg folder.
* Move lbg specific codes from pmutil.c to soc_pmutil.c under lbg
  folder.
* Create and revise makefile for files under lbg folder.

TEST=Can boot into OS on OCP Delta Lake.

Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I06555ed6612c632ea2ce1938d81781cd9348017a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70009
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>

src/mainboard/ocp/tiogapass/romstage.c

@@ -7,7 +7,7 @@
 #include <soc/romstage.h>
 #include <string.h>
 #include <gpio.h>
-#include <soc/lewisburg_pch_gpio_defs.h>
+#include <soc/gpio_soc_defs.h>
 #include <skxsp_tp_iio.h>
 
 #include "ipmi.h"

src/soc/intel/xeon_sp/Makefile.inc

@@ -2,13 +2,13 @@
 
 ifeq ($(CONFIG_XEON_SP_COMMON_BASE),y)
 
-subdirs-$(CONFIG_SOC_INTEL_SKYLAKE_SP) += skx
-subdirs-$(CONFIG_SOC_INTEL_COOPERLAKE_SP) += cpx
+subdirs-$(CONFIG_SOC_INTEL_SKYLAKE_SP) += skx lbg
+subdirs-$(CONFIG_SOC_INTEL_COOPERLAKE_SP) += cpx lbg
 
-bootblock-y += bootblock.c spi.c lpc.c gpio.c pch.c
-romstage-y += romstage.c reset.c util.c spi.c gpio.c pmutil.c memmap.c
+bootblock-y += bootblock.c spi.c lpc.c pch.c
+romstage-y += romstage.c reset.c util.c spi.c pmutil.c memmap.c
 romstage-y += ../../../cpu/intel/car/romstage.c
-ramstage-y += uncore.c reset.c util.c lpc.c spi.c gpio.c ramstage.c chip_common.c
+ramstage-y += uncore.c reset.c util.c lpc.c spi.c ramstage.c chip_common.c
 ramstage-y += memmap.c pch.c lockdown.c finalize.c
 ramstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_PMC) += pmc.c pmutil.c
 ramstage-$(CONFIG_HAVE_ACPI_TABLES) += nb_acpi.c acpi.c

src/soc/intel/xeon_sp/cpx/chip.c

@@ -14,6 +14,7 @@
 #include <soc/chip_common.h>
 #include <soc/cpu.h>
 #include <soc/pch.h>
+#include <soc/soc_pch.h>
 #include <soc/ramstage.h>
 #include <soc/p2sb.h>
 #include <soc/soc_util.h>

src/soc/intel/xeon_sp/include/soc/gpio.h

@@ -3,7 +3,7 @@
 #ifndef _SOC_GPIO_H_
 #define _SOC_GPIO_H_
 
-#include <soc/lewisburg_pch_gpio_defs.h>
+#include <soc/gpio_soc_defs.h>
 #include <intelblocks/gpio.h>
 
 /*

src/soc/intel/xeon_sp/include/soc/pch.h

@@ -10,6 +10,5 @@ void pch_disable_devfn(struct device *dev);
 #endif
 
 void override_hpet_ioapic_bdf(void);
-void pch_lock_dmictl(void);
 
 #endif /* _SOC_PCH_H_ */

src/soc/intel/xeon_sp/lbg/Makefile.inc

@@ -0,0 +1,7 @@
+## SPDX-License-Identifier: GPL-2.0-only
+
+bootblock-y += soc_pch.c soc_gpio.c
+romstage-y += soc_pmutil.c soc_gpio.c
+ramstage-y += soc_pmutil.c soc_pch.c soc_gpio.c
+
+CPPFLAGS_common += -I$(src)/soc/intel/xeon_sp/lbg/include

src/soc/intel/xeon_sp/lbg/include/soc/soc_pch.h

@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _SOC_SOC_PCH_H_
+#define _SOC_SOC_PCH_H_
+
+void pch_lock_dmictl(void);
+
+#endif /* _SOC_SOC_PCH_H_ */

src/soc/intel/xeon_sp/lbg/soc_pch.c

@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <device/pci_ops.h>
+#include <soc/pci_devs.h>
+#include <soc/pcr_ids.h>
+#include <intelblocks/pcr.h>
+#include <intelblocks/rtc.h>
+#include <intelblocks/p2sb.h>
+#include <soc/bootblock.h>
+#include <soc/soc_pch.h>
+#include <soc/pmc.h>
+#include <console/console.h>
+
+#define PCR_DMI_ACPIBA		0x27B4
+#define PCR_DMI_ACPIBDID	0x27B8
+#define PCR_DMI_DMICTL		0x2234
+#define  PCR_DMI_DMICTL_SRLOCK	(1 << 31)
+#define PCR_DMI_PMBASEA		0x27AC
+#define PCR_DMI_PMBASEC		0x27B0
+
+static void soc_config_acpibase(void)
+{
+	uint32_t reg32;
+
+	/* Disable ABASE in PMC Device first before changing Base Address */
+	reg32 = pci_read_config32(PCH_DEV_PMC, ACTL);
+	pci_write_config32(PCH_DEV_PMC, ACTL, reg32 & ~ACPI_EN);
+
+	/* Program ACPI Base */
+	pci_write_config32(PCH_DEV_PMC, ABASE, ACPI_BASE_ADDRESS);
+
+	/* Enable ACPI in PMC */
+	pci_write_config32(PCH_DEV_PMC, ACTL, reg32 | ACPI_EN);
+
+	uint32_t data = pci_read_config32(PCH_DEV_PMC, ABASE);
+	printk(BIOS_INFO, "%s : pmbase = %x\n", __func__, (int)data);
+	/*
+	 * Program "ACPI Base Address" PCR[DMI] + 27B4h[23:18, 15:2, 0]
+	 * to [0x3F, PMC PCI Offset 40h bit[15:2], 1]
+	 */
+	reg32 = (0x3f << 18) | ACPI_BASE_ADDRESS | 1;
+	pcr_write32(PID_DMI, PCR_DMI_ACPIBA, reg32);
+	pcr_write32(PID_DMI, PCR_DMI_ACPIBDID, 0x23a8);
+}
+
+void bootblock_pch_init(void)
+{
+	/*
+	 * Enabling ABASE for accessing PM1_STS, PM1_EN, PM1_CNT
+	 */
+	soc_config_acpibase();
+}
+
+void pch_lock_dmictl(void)
+{
+	uint32_t reg32 = pcr_read32(PID_DMI, PCR_DMI_DMICTL);
+	pcr_write32(PID_DMI, PCR_DMI_DMICTL, reg32 | PCR_DMI_DMICTL_SRLOCK);
+}

src/soc/intel/xeon_sp/lbg/soc_pmutil.c

@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/*
+ * Helper functions for dealing with power management registers
+ * and the differences between PCH variants.
+ */
+
+#define __SIMPLE_DEVICE__
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <intelblocks/pmclib.h>
+#include <intelblocks/rtc.h>
+#include <soc/pci_devs.h>
+#include <soc/pm.h>
+#include <soc/pmc.h>
+
+uint8_t *pmc_mmio_regs(void)
+{
+	return (void *)(uintptr_t) pci_read_config32(PCH_DEV_PMC, PWRMBASE);
+}
+
+uintptr_t soc_read_pmc_base(void)
+{
+	return (uintptr_t) (pmc_mmio_regs());
+}
+
+uint32_t *soc_pmc_etr_addr(void)
+{
+	/*
+	 * The pointer returned must not be cached, because the address depends on the
+	 * MMCONF base address and the assigned PCI bus number, which both may change
+	 * during the boot process!
+	 */
+	return pci_mmio_config32_addr(PCH_DEVFN_PMC << 12, ETR);
+}
+
+int soc_get_rtc_failed(void)
+{
+	uint32_t pmcon_b = pci_s_read_config32(PCH_DEV_PMC, GEN_PMCON_B);
+	int rtc_fail = !!(pmcon_b & RTC_BATTERY_DEAD);
+
+	if (rtc_fail)
+		printk(BIOS_ERR, "%s: RTC battery dead or removed\n", __func__);
+
+	return rtc_fail;
+}
+
+void soc_fill_power_state(struct chipset_power_state *ps)
+{
+	uint8_t *pmc;
+
+	ps->gen_pmcon_a = pci_read_config32(PCH_DEV_PMC, GEN_PMCON_A);
+	ps->gen_pmcon_b = pci_read_config32(PCH_DEV_PMC, GEN_PMCON_B);
+
+	pmc = pmc_mmio_regs();
+	ps->gblrst_cause[0] = read32(pmc + GBLRST_CAUSE0);
+	ps->gblrst_cause[1] = read32(pmc + GBLRST_CAUSE1);
+
+	printk(BIOS_DEBUG, "GEN_PMCON: %08x %08x\n",
+	       ps->gen_pmcon_a, ps->gen_pmcon_b);
+
+	printk(BIOS_DEBUG, "GBLRST_CAUSE: %08x %08x\n",
+	       ps->gblrst_cause[0], ps->gblrst_cause[1]);
+}
+
+/*
+ * Set which power state system will be after reapplying
+ * the power (from G3 State)
+ */
+void pmc_soc_set_afterg3_en(const bool on)
+{
+	uint8_t reg8;
+
+	reg8 = pci_read_config8(PCH_DEV_PMC, GEN_PMCON_B);
+	if (on)
+		reg8 &= ~SLEEP_AFTER_POWER_FAIL;
+	else
+		reg8 |= SLEEP_AFTER_POWER_FAIL;
+	pci_write_config8(PCH_DEV_PMC, GEN_PMCON_B, reg8);
+}

src/soc/intel/xeon_sp/pch.c

@@ -11,46 +11,6 @@
 #include <soc/pmc.h>
 #include <console/console.h>
 
-#define PCR_DMI_ACPIBA		0x27B4
-#define PCR_DMI_ACPIBDID	0x27B8
-#define PCR_DMI_DMICTL		0x2234
-#define  PCR_DMI_DMICTL_SRLOCK	(1 << 31)
-#define PCR_DMI_PMBASEA		0x27AC
-#define PCR_DMI_PMBASEC		0x27B0
-
-static void soc_config_acpibase(void)
-{
-	uint32_t reg32;
-
-	/* Disable ABASE in PMC Device first before changing Base Address */
-	reg32 = pci_read_config32(PCH_DEV_PMC, ACTL);
-	pci_write_config32(PCH_DEV_PMC, ACTL, reg32 & ~ACPI_EN);
-
-	/* Program ACPI Base */
-	pci_write_config32(PCH_DEV_PMC, ABASE, ACPI_BASE_ADDRESS);
-
-	/* Enable ACPI in PMC */
-	pci_write_config32(PCH_DEV_PMC, ACTL, reg32 | ACPI_EN);
-
-	uint32_t data = pci_read_config32(PCH_DEV_PMC, ABASE);
-	printk(BIOS_INFO, "%s : pmbase = %x\n", __func__, (int)data);
-	/*
-	 * Program "ACPI Base Address" PCR[DMI] + 27B4h[23:18, 15:2, 0]
-	 * to [0x3F, PMC PCI Offset 40h bit[15:2], 1]
-	 */
-	reg32 = (0x3f << 18) | ACPI_BASE_ADDRESS | 1;
-	pcr_write32(PID_DMI, PCR_DMI_ACPIBA, reg32);
-	pcr_write32(PID_DMI, PCR_DMI_ACPIBDID, 0x23a8);
-}
-
-void bootblock_pch_init(void)
-{
-	/*
-	 * Enabling ABASE for accessing PM1_STS, PM1_EN, PM1_CNT
-	 */
-	soc_config_acpibase();
-}
-
 void override_hpet_ioapic_bdf(void)
 {
 	union p2sb_bdf ioapic_bdf = {
@@ -67,9 +27,3 @@ void override_hpet_ioapic_bdf(void)
 	p2sb_set_ioapic_bdf(ioapic_bdf);
 	p2sb_set_hpet_bdf(hpet_bdf);
 }
-
-void pch_lock_dmictl(void)
-{
-	uint32_t reg32 = pcr_read32(PID_DMI, PCR_DMI_DMICTL);
-	pcr_write32(PID_DMI, PCR_DMI_DMICTL, reg32 | PCR_DMI_DMICTL_SRLOCK);
-}

src/soc/intel/xeon_sp/pmutil.c

@@ -90,42 +90,11 @@ const char *const *soc_std_gpe_sts_array(size_t *gpe_arr)
 	return gpe_sts_bits;
 }
 
-uint8_t *pmc_mmio_regs(void)
-{
-	return (void *)(uintptr_t)pci_read_config32(PCH_DEV_PMC, PWRMBASE);
-}
-
-uintptr_t soc_read_pmc_base(void)
-{
-	return (uintptr_t)(pmc_mmio_regs());
-}
-
-uint32_t *soc_pmc_etr_addr(void)
-{
-	/*
-	 * The pointer returned must not be cached, because the address depends on the
-	 * MMCONF base address and the assigned PCI bus number, which both may change
-	 * during the boot process!
-	 */
-	return pci_mmio_config32_addr(PCH_DEVFN_PMC << 12, ETR);
-}
-
 void soc_get_gpi_gpe_configs(uint8_t *dw0, uint8_t *dw1, uint8_t *dw2)
 {
 	/* No functionality for this yet */
 }
 
-int soc_get_rtc_failed(void)
-{
-	uint32_t pmcon_b = pci_s_read_config32(PCH_DEV_PMC, GEN_PMCON_B);
-	int rtc_fail = !!(pmcon_b & RTC_BATTERY_DEAD);
-
-	if (rtc_fail)
-		printk(BIOS_ERR, "%s: RTC battery dead or removed\n", __func__);
-
-	return rtc_fail;
-}
-
 /* Return 0, 3, or 5 to indicate the previous sleep state. */
 int soc_prev_sleep_state(const struct chipset_power_state *ps, int prev_sleep_state)
 {
@@ -141,41 +110,8 @@ int soc_prev_sleep_state(const struct chipset_power_state *ps, int prev_sleep_st
 	return prev_sleep_state;
 }
 
-void soc_fill_power_state(struct chipset_power_state *ps)
-{
-	uint8_t *pmc;
-
-	ps->gen_pmcon_a = pci_read_config32(PCH_DEV_PMC, GEN_PMCON_A);
-	ps->gen_pmcon_b = pci_read_config32(PCH_DEV_PMC, GEN_PMCON_B);
-
-	pmc = pmc_mmio_regs();
-	ps->gblrst_cause[0] = read32(pmc + GBLRST_CAUSE0);
-	ps->gblrst_cause[1] = read32(pmc + GBLRST_CAUSE1);
-
-	printk(BIOS_DEBUG, "GEN_PMCON: %08x %08x\n",
-	       ps->gen_pmcon_a, ps->gen_pmcon_b);
-
-	printk(BIOS_DEBUG, "GBLRST_CAUSE: %08x %08x\n",
-	       ps->gblrst_cause[0], ps->gblrst_cause[1]);
-}
-
 /* STM Support */
 uint16_t get_pmbase(void)
 {
 	return ACPI_BASE_ADDRESS;
 }
-
-/*
- * Set which power state system will be after reapplying
- * the power (from G3 State)
- */
-void pmc_soc_set_afterg3_en(const bool on)
-{
-	uint8_t reg8;
-	reg8 = pci_read_config8(PCH_DEV_PMC, GEN_PMCON_B);
-	if (on)
-		reg8 &= ~SLEEP_AFTER_POWER_FAIL;
-	else
-		reg8 |= SLEEP_AFTER_POWER_FAIL;
-	pci_write_config8(PCH_DEV_PMC, GEN_PMCON_B, reg8);
-}

src/soc/intel/xeon_sp/skx/chip.c

@@ -8,6 +8,7 @@
 #include <soc/acpi.h>
 #include <soc/chip_common.h>
 #include <soc/pch.h>
+#include <soc/soc_pch.h>
 #include <soc/ramstage.h>
 #include <soc/soc_util.h>
 #include <soc/util.h>