add ibm e326 support, basically it is the same as e325
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1981 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Li-Ta Lo
parent
fb07bf4aca
commit
14cde9e96a
|
|
@ -0,0 +1,210 @@
|
|||
##
|
||||
## Compute the location and size of where this firmware image
|
||||
## (linuxBIOS plus bootloader) will live in the boot rom chip.
|
||||
##
|
||||
if USE_FALLBACK_IMAGE
|
||||
default ROM_SECTION_SIZE = FALLBACK_SIZE
|
||||
default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
|
||||
else
|
||||
default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
|
||||
default ROM_SECTION_OFFSET = 0
|
||||
end
|
||||
|
||||
##
|
||||
## Compute the start location and size size of
|
||||
## The linuxBIOS bootloader.
|
||||
##
|
||||
default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
|
||||
default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
|
||||
|
||||
##
|
||||
## Compute where this copy of linuxBIOS will start in the boot rom
|
||||
##
|
||||
default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
|
||||
|
||||
##
|
||||
## Compute a range of ROM that can cached to speed up linuxBIOS,
|
||||
## execution speed.
|
||||
##
|
||||
## XIP_ROM_SIZE must be a power of 2.
|
||||
## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
|
||||
##
|
||||
default XIP_ROM_SIZE=65536
|
||||
default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
|
||||
|
||||
##
|
||||
## Set all of the defaults for an x86 architecture
|
||||
##
|
||||
|
||||
arch i386 end
|
||||
|
||||
##
|
||||
## Build the objects we have code for in this directory.
|
||||
##
|
||||
|
||||
driver mainboard.o
|
||||
if HAVE_MP_TABLE object mptable.o end
|
||||
if HAVE_PIRQ_TABLE object irq_tables.o end
|
||||
|
||||
##
|
||||
## Romcc output
|
||||
##
|
||||
makerule ./failover.E
|
||||
depends "$(MAINBOARD)/failover.c ./romcc"
|
||||
action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
|
||||
end
|
||||
|
||||
makerule ./failover.inc
|
||||
depends "$(MAINBOARD)/failover.c ./romcc"
|
||||
action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
|
||||
end
|
||||
|
||||
makerule ./auto.E
|
||||
depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
|
||||
action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
|
||||
end
|
||||
makerule ./auto.inc
|
||||
depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
|
||||
action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
|
||||
end
|
||||
|
||||
##
|
||||
## Build our 16 bit and 32 bit linuxBIOS entry code
|
||||
##
|
||||
mainboardinit cpu/x86/16bit/entry16.inc
|
||||
mainboardinit cpu/x86/32bit/entry32.inc
|
||||
ldscript /cpu/x86/16bit/entry16.lds
|
||||
ldscript /cpu/x86/32bit/entry32.lds
|
||||
|
||||
##
|
||||
## Build our reset vector (This is where linuxBIOS is entered)
|
||||
##
|
||||
if USE_FALLBACK_IMAGE
|
||||
mainboardinit cpu/x86/16bit/reset16.inc
|
||||
ldscript /cpu/x86/16bit/reset16.lds
|
||||
else
|
||||
mainboardinit cpu/x86/32bit/reset32.inc
|
||||
ldscript /cpu/x86/32bit/reset32.lds
|
||||
end
|
||||
|
||||
### Should this be in the northbridge code?
|
||||
mainboardinit arch/i386/lib/cpu_reset.inc
|
||||
|
||||
##
|
||||
## Include an id string (For safe flashing)
|
||||
##
|
||||
mainboardinit arch/i386/lib/id.inc
|
||||
ldscript /arch/i386/lib/id.lds
|
||||
|
||||
###
|
||||
### This is the early phase of linuxBIOS startup
|
||||
### Things are delicate and we test to see if we should
|
||||
### failover to another image.
|
||||
###
|
||||
if USE_FALLBACK_IMAGE
|
||||
ldscript /arch/i386/lib/failover.lds
|
||||
mainboardinit ./failover.inc
|
||||
end
|
||||
|
||||
###
|
||||
### O.k. We aren't just an intermediary anymore!
|
||||
###
|
||||
|
||||
##
|
||||
## Setup RAM
|
||||
##
|
||||
mainboardinit cpu/x86/fpu/enable_fpu.inc
|
||||
mainboardinit cpu/x86/mmx/enable_mmx.inc
|
||||
mainboardinit cpu/x86/sse/enable_sse.inc
|
||||
mainboardinit ./auto.inc
|
||||
mainboardinit cpu/x86/sse/disable_sse.inc
|
||||
mainboardinit cpu/x86/mmx/disable_mmx.inc
|
||||
|
||||
##
|
||||
## Include the secondary Configuration files
|
||||
##
|
||||
dir /pc80
|
||||
config chip.h
|
||||
|
||||
|
||||
chip northbridge/amd/amdk8/root_complex
|
||||
device pci_domain 0 on
|
||||
chip northbridge/amd/amdk8
|
||||
device pci 18.0 on end # LDT 0
|
||||
device pci 18.0 on # LDT 1
|
||||
chip southbridge/amd/amd8131
|
||||
device pci 0.0 on end
|
||||
device pci 0.1 on end
|
||||
device pci 1.0 on end
|
||||
device pci 1.1 on end
|
||||
end
|
||||
chip southbridge/amd/amd8111
|
||||
device pci 0.0 on
|
||||
device pci 0.0 on end
|
||||
device pci 0.1 on end
|
||||
device pci 0.2 on end
|
||||
device pci 1.0 off end
|
||||
end
|
||||
device pci 1.0 on
|
||||
chip superio/NSC/pc87366
|
||||
device pnp 2e.0 off # Floppy
|
||||
io 0x60 = 0x3f0
|
||||
irq 0x70 = 6
|
||||
drq 0x74 = 2
|
||||
end
|
||||
device pnp 2e.1 off # Parallel Port
|
||||
io 0x60 = 0x378
|
||||
irq 0x70 = 7
|
||||
end
|
||||
device pnp 2e.2 off # Com 2
|
||||
io 0x60 = 0x2f8
|
||||
irq 0x70 = 3
|
||||
end
|
||||
device pnp 2e.3 on # Com 1
|
||||
io 0x60 = 0x3f8
|
||||
irq 0x70 = 4
|
||||
end
|
||||
device pnp 2e.4 off end # SWC
|
||||
device pnp 2e.5 off end # Mouse
|
||||
device pnp 2e.6 on # Keyboard
|
||||
io 0x60 = 0x60
|
||||
io 0x62 = 0x64
|
||||
irq 0x70 = 1
|
||||
end
|
||||
device pnp 2e.7 off end # GPIO
|
||||
device pnp 2e.8 off end # ACB
|
||||
device pnp 2e.9 off end # FSCM
|
||||
device pnp 2e.a off end # WDT
|
||||
end
|
||||
end
|
||||
device pci 1.1 on end
|
||||
device pci 1.2 on end
|
||||
device pci 1.3 on end
|
||||
device pci 1.5 off end
|
||||
device pci 1.6 off end
|
||||
end
|
||||
end # device pci 18.0
|
||||
device pci 18.0 on end # LDT2
|
||||
device pci 18.1 on end
|
||||
device pci 18.2 on end
|
||||
device pci 18.3 on end
|
||||
end
|
||||
chip northbridge/amd/amdk8
|
||||
device pci 19.0 on end
|
||||
device pci 19.0 on end
|
||||
device pci 19.0 on end
|
||||
device pci 19.1 on end
|
||||
device pci 19.2 on end
|
||||
device pci 19.3 on end
|
||||
end
|
||||
end
|
||||
device apic_cluster 0 on
|
||||
chip cpu/amd/socket_940
|
||||
device apic 0 on end
|
||||
end
|
||||
chip cpu/amd/socket_940
|
||||
device apic 1 on end
|
||||
end
|
||||
end
|
||||
end
|
||||
|
||||
|
|
@ -0,0 +1,218 @@
|
|||
uses HAVE_MP_TABLE
|
||||
uses HAVE_PIRQ_TABLE
|
||||
uses USE_FALLBACK_IMAGE
|
||||
uses HAVE_FALLBACK_BOOT
|
||||
uses HAVE_HARD_RESET
|
||||
uses HARD_RESET_BUS
|
||||
uses HARD_RESET_DEVICE
|
||||
uses HARD_RESET_FUNCTION
|
||||
uses IRQ_SLOT_COUNT
|
||||
uses HAVE_OPTION_TABLE
|
||||
uses CONFIG_MAX_CPUS
|
||||
uses CONFIG_MAX_PHYSICAL_CPUS
|
||||
uses CONFIG_IOAPIC
|
||||
uses CONFIG_SMP
|
||||
uses FALLBACK_SIZE
|
||||
uses ROM_SIZE
|
||||
uses ROM_SECTION_SIZE
|
||||
uses ROM_IMAGE_SIZE
|
||||
uses ROM_SECTION_SIZE
|
||||
uses ROM_SECTION_OFFSET
|
||||
uses CONFIG_ROM_STREAM
|
||||
uses CONFIG_ROM_STREAM_START
|
||||
uses PAYLOAD_SIZE
|
||||
uses _ROMBASE
|
||||
uses XIP_ROM_SIZE
|
||||
uses XIP_ROM_BASE
|
||||
uses STACK_SIZE
|
||||
uses HEAP_SIZE
|
||||
uses USE_OPTION_TABLE
|
||||
uses LB_CKS_RANGE_START
|
||||
uses LB_CKS_RANGE_END
|
||||
uses LB_CKS_LOC
|
||||
uses MAINBOARD_PART_NUMBER
|
||||
uses MAINBOARD_VENDOR
|
||||
uses MAINBOARD
|
||||
uses LINUXBIOS_EXTRA_VERSION
|
||||
uses _RAMBASE
|
||||
uses TTYS0_BAUD
|
||||
uses TTYS0_BASE
|
||||
uses TTYS0_LCS
|
||||
uses DEFAULT_CONSOLE_LOGLEVEL
|
||||
uses MAXIMUM_CONSOLE_LOGLEVEL
|
||||
uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
|
||||
uses CONFIG_CONSOLE_SERIAL8250
|
||||
uses CROSS_COMPILE
|
||||
uses CC
|
||||
uses HOSTCC
|
||||
uses OBJCOPY
|
||||
|
||||
uses CONFIG_USE_INIT
|
||||
|
||||
|
||||
###
|
||||
### Build options
|
||||
###
|
||||
|
||||
##
|
||||
## ROM_SIZE is the size of boot ROM that this board will use.
|
||||
##
|
||||
default ROM_SIZE=524288
|
||||
|
||||
##
|
||||
## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
|
||||
##
|
||||
default FALLBACK_SIZE=131072
|
||||
|
||||
##
|
||||
## Build code for the fallback boot
|
||||
##
|
||||
default HAVE_FALLBACK_BOOT=1
|
||||
|
||||
##
|
||||
## Build code to reset the motherboard from linuxBIOS
|
||||
##
|
||||
default HAVE_HARD_RESET=1
|
||||
|
||||
##
|
||||
## Funky hard reset implementation
|
||||
##
|
||||
default HARD_RESET_BUS=1
|
||||
default HARD_RESET_DEVICE=4
|
||||
default HARD_RESET_FUNCTION=0
|
||||
|
||||
##
|
||||
## Build code to export a programmable irq routing table
|
||||
##
|
||||
default HAVE_PIRQ_TABLE=1
|
||||
default IRQ_SLOT_COUNT=9
|
||||
|
||||
##
|
||||
## Build code to export an x86 MP table
|
||||
## Useful for specifying IRQ routing values
|
||||
##
|
||||
default HAVE_MP_TABLE=1
|
||||
|
||||
##
|
||||
## Build code to export a CMOS option table
|
||||
##
|
||||
default HAVE_OPTION_TABLE=1
|
||||
|
||||
##
|
||||
## Move the default LinuxBIOS cmos range off of AMD RTC registers
|
||||
##
|
||||
default LB_CKS_RANGE_START=49
|
||||
default LB_CKS_RANGE_END=122
|
||||
default LB_CKS_LOC=123
|
||||
|
||||
##
|
||||
## Build code for SMP support
|
||||
## Only worry about 2 micro processors
|
||||
##
|
||||
default CONFIG_SMP=1
|
||||
default CONFIG_MAX_CPUS=2
|
||||
default CONFIG_MAX_PHYSICAL_CPUS=2
|
||||
|
||||
##
|
||||
## Build code to setup a generic IOAPIC
|
||||
##
|
||||
default CONFIG_IOAPIC=1
|
||||
|
||||
##
|
||||
## Clean up the motherboard id strings
|
||||
##
|
||||
default MAINBOARD_PART_NUMBER="E326"
|
||||
default MAINBOARD_VENDOR="IBM"
|
||||
#default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x161f
|
||||
#default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3016
|
||||
|
||||
###
|
||||
### LinuxBIOS layout values
|
||||
###
|
||||
|
||||
## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
|
||||
default ROM_IMAGE_SIZE = 65536
|
||||
|
||||
##
|
||||
## Use a small 8K stack
|
||||
##
|
||||
default STACK_SIZE=0x2000
|
||||
|
||||
##
|
||||
## Use a small 16K heap
|
||||
##
|
||||
default HEAP_SIZE=0x8000
|
||||
|
||||
##
|
||||
## Only use the option table in a normal image
|
||||
##
|
||||
default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
|
||||
|
||||
##
|
||||
## LinuxBIOS C code runs at this location in RAM
|
||||
##
|
||||
default _RAMBASE=0x00004000
|
||||
|
||||
##
|
||||
## Load the payload from the ROM
|
||||
##
|
||||
default CONFIG_ROM_STREAM = 1
|
||||
|
||||
###
|
||||
### Defaults of options that you may want to override in the target config file
|
||||
###
|
||||
|
||||
##
|
||||
## The default compiler
|
||||
##
|
||||
default CC="$(CROSS_COMPILE)gcc -m32"
|
||||
default HOSTCC="gcc"
|
||||
|
||||
##
|
||||
## The Serial Console
|
||||
##
|
||||
|
||||
# To Enable the Serial Console
|
||||
default CONFIG_CONSOLE_SERIAL8250=1
|
||||
|
||||
## Select the serial console baud rate
|
||||
default TTYS0_BAUD=115200
|
||||
#default TTYS0_BAUD=57600
|
||||
#default TTYS0_BAUD=38400
|
||||
#default TTYS0_BAUD=19200
|
||||
#default TTYS0_BAUD=9600
|
||||
#default TTYS0_BAUD=4800
|
||||
#default TTYS0_BAUD=2400
|
||||
#default TTYS0_BAUD=1200
|
||||
|
||||
# Select the serial console base port
|
||||
default TTYS0_BASE=0x3f8
|
||||
|
||||
# Select the serial protocol
|
||||
# This defaults to 8 data bits, 1 stop bit, and no parity
|
||||
default TTYS0_LCS=0x3
|
||||
|
||||
##
|
||||
### Select the linuxBIOS loglevel
|
||||
##
|
||||
## EMERG 1 system is unusable
|
||||
## ALERT 2 action must be taken immediately
|
||||
## CRIT 3 critical conditions
|
||||
## ERR 4 error conditions
|
||||
## WARNING 5 warning conditions
|
||||
## NOTICE 6 normal but significant condition
|
||||
## INFO 7 informational
|
||||
## DEBUG 8 debug-level messages
|
||||
## SPEW 9 Way too many details
|
||||
|
||||
## Request this level of debugging output
|
||||
default DEFAULT_CONSOLE_LOGLEVEL=8
|
||||
## At a maximum only compile in this level of debugging
|
||||
default MAXIMUM_CONSOLE_LOGLEVEL=8
|
||||
|
||||
##
|
||||
## Select power on after power fail setting
|
||||
default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
|
||||
|
||||
### End Options.lb
|
||||
end
|
||||
|
|
@ -0,0 +1,237 @@
|
|||
#define ASSEMBLY 1
|
||||
#define DEFAULT_CONSOLE_LOGLEVEL 8
|
||||
#define MAXIMUM_CONSOLE_LOGLEVEL 8
|
||||
#include <stdint.h>
|
||||
#include <device/pci_def.h>
|
||||
#include <arch/io.h>
|
||||
#include <device/pnp_def.h>
|
||||
#include <arch/romcc_io.h>
|
||||
#include <cpu/x86/lapic.h>
|
||||
#include <arch/cpu.h>
|
||||
#include "option_table.h"
|
||||
#include "pc80/mc146818rtc_early.c"
|
||||
#include "pc80/serial.c"
|
||||
#include "arch/i386/lib/console.c"
|
||||
#include "ram/ramtest.c"
|
||||
#include "northbridge/amd/amdk8/incoherent_ht.c"
|
||||
#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
|
||||
#include "northbridge/amd/amdk8/raminit.h"
|
||||
#include "cpu/amd/model_fxx/apic_timer.c"
|
||||
#include "lib/delay.c"
|
||||
#include "cpu/x86/lapic/boot_cpu.c"
|
||||
#include "northbridge/amd/amdk8/reset_test.c"
|
||||
#include "northbridge/amd/amdk8/debug.c"
|
||||
#include "northbridge/amd/amdk8/cpu_rev.c"
|
||||
#include "superio/NSC/pc87366/pc87366_early_serial.c"
|
||||
#include "cpu/amd/mtrr/amd_earlymtrr.c"
|
||||
#include "cpu/x86/bist.h"
|
||||
|
||||
#define SERIAL_DEV PNP_DEV(0x2e, PC87366_SP1)
|
||||
|
||||
static void hard_reset(void)
|
||||
{
|
||||
set_bios_reset();
|
||||
|
||||
/* enable cf9 */
|
||||
pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
|
||||
/* reset */
|
||||
outb(0x0e, 0x0cf9);
|
||||
}
|
||||
|
||||
static void soft_reset(void)
|
||||
{
|
||||
set_bios_reset();
|
||||
pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
|
||||
}
|
||||
|
||||
static void memreset_setup(void)
|
||||
{
|
||||
if (is_cpu_pre_c0()) {
|
||||
/* Set the memreset low */
|
||||
outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);
|
||||
/* Ensure the BIOS has control of the memory lines */
|
||||
outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
|
||||
} else {
|
||||
/* Ensure the CPU has controll of the memory lines */
|
||||
outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17);
|
||||
}
|
||||
}
|
||||
|
||||
static void memreset(int controllers, const struct mem_controller *ctrl)
|
||||
{
|
||||
if (is_cpu_pre_c0()) {
|
||||
udelay(800);
|
||||
/* Set memreset_high */
|
||||
outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);
|
||||
udelay(90);
|
||||
}
|
||||
}
|
||||
|
||||
static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes)
|
||||
{
|
||||
/* Routing Table Node i
|
||||
*
|
||||
* F0: 0x40, 0x44, 0x48, 0x4c, 0x50, 0x54, 0x58, 0x5c
|
||||
* i: 0, 1, 2, 3, 4, 5, 6, 7
|
||||
*
|
||||
* [ 0: 3] Request Route
|
||||
* [0] Route to this node
|
||||
* [1] Route to Link 0
|
||||
* [2] Route to Link 1
|
||||
* [3] Route to Link 2
|
||||
* [11: 8] Response Route
|
||||
* [0] Route to this node
|
||||
* [1] Route to Link 0
|
||||
* [2] Route to Link 1
|
||||
* [3] Route to Link 2
|
||||
* [19:16] Broadcast route
|
||||
* [0] Route to this node
|
||||
* [1] Route to Link 0
|
||||
* [2] Route to Link 1
|
||||
* [3] Route to Link 2
|
||||
*/
|
||||
|
||||
uint32_t ret = 0x00010101; /* default row entry */
|
||||
|
||||
/* CPU0 LDT2 <-> LDT2 CPU1 */
|
||||
static const unsigned int rows_2p[2][2] = {
|
||||
{ 0x00090101, 0x00010808 },
|
||||
{ 0x00010808, 0x00090101 }
|
||||
};
|
||||
|
||||
if (maxnodes > 2) {
|
||||
print_debug("this mainboard is only designed for 2 cpus\r\n");
|
||||
maxnodes = 2;
|
||||
}
|
||||
|
||||
if (!(node >= maxnodes || row >= maxnodes)) {
|
||||
ret = rows_2p[node][row];
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static inline void activate_spd_rom(const struct mem_controller *ctrl)
|
||||
{
|
||||
/* nothing to do */
|
||||
}
|
||||
|
||||
static inline int spd_read_byte(unsigned device, unsigned address)
|
||||
{
|
||||
return smbus_read_byte(device, address);
|
||||
}
|
||||
|
||||
#include "northbridge/amd/amdk8/raminit.c"
|
||||
|
||||
#include "northbridge/amd/amdk8/coherent_ht.c"
|
||||
#include "sdram/generic_sdram.c"
|
||||
#include "mainboard/ibm/e326/resourcemap.c"
|
||||
|
||||
#define FIRST_CPU 1
|
||||
#define SECOND_CPU 1
|
||||
#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
|
||||
static void main(unsigned long bist)
|
||||
{
|
||||
static const struct mem_controller cpu[] = {
|
||||
#if FIRST_CPU
|
||||
{
|
||||
.node_id = 0,
|
||||
.f0 = PCI_DEV(0, 0x18, 0),
|
||||
.f1 = PCI_DEV(0, 0x18, 1),
|
||||
.f2 = PCI_DEV(0, 0x18, 2),
|
||||
.f3 = PCI_DEV(0, 0x18, 3),
|
||||
.channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
|
||||
.channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
|
||||
},
|
||||
#endif
|
||||
#if SECOND_CPU
|
||||
{
|
||||
.node_id = 1,
|
||||
.f0 = PCI_DEV(0, 0x19, 0),
|
||||
.f1 = PCI_DEV(0, 0x19, 1),
|
||||
.f2 = PCI_DEV(0, 0x19, 2),
|
||||
.f3 = PCI_DEV(0, 0x19, 3),
|
||||
.channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
|
||||
.channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
|
||||
},
|
||||
#endif
|
||||
};
|
||||
|
||||
int needs_reset;
|
||||
unsigned nodeid;
|
||||
|
||||
if (bist == 0) {
|
||||
/* Skip this if there was a built in self test failure */
|
||||
amd_early_mtrr_init();
|
||||
enable_lapic();
|
||||
init_timer();
|
||||
|
||||
nodeid = lapicid() & 0xf;
|
||||
|
||||
/* Has this cpu already booted? */
|
||||
if (cpu_init_detected(nodeid)) {
|
||||
asm volatile ("jmp __cpu_reset");
|
||||
}
|
||||
distinguish_cpu_resets(nodeid);
|
||||
if (!boot_cpu()) {
|
||||
stop_this_cpu();
|
||||
}
|
||||
}
|
||||
/* Setup the console */
|
||||
pc87366_enable_serial(SERIAL_DEV, TTYS0_BASE);
|
||||
uart_init();
|
||||
console_init();
|
||||
|
||||
/* Halt if there was a built in self test failure */
|
||||
report_bist_failure(bist);
|
||||
|
||||
#if 0
|
||||
print_pci_devices();
|
||||
#endif
|
||||
|
||||
setup_ibm_e326_resource_map();
|
||||
|
||||
#if 0
|
||||
print_debug("after setting resource\n");
|
||||
print_pci_devices();
|
||||
#endif
|
||||
|
||||
needs_reset = setup_coherent_ht_domain();
|
||||
needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0xA0);
|
||||
|
||||
#if 0
|
||||
print_debug("after ht stuff\n");
|
||||
print_pci_devices();
|
||||
#endif
|
||||
|
||||
if (needs_reset) {
|
||||
print_info("ht reset -\r\n");
|
||||
soft_reset();
|
||||
}
|
||||
|
||||
#if 0
|
||||
print_pci_devices();
|
||||
#endif
|
||||
|
||||
enable_smbus();
|
||||
|
||||
#if 0
|
||||
dump_spd_registers(&cpu[0]);
|
||||
#endif
|
||||
|
||||
memreset_setup();
|
||||
sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu);
|
||||
|
||||
#if 0
|
||||
dump_pci_devices();
|
||||
#endif
|
||||
|
||||
#if 0
|
||||
dump_pci_device(PCI_DEV(0, 0x18, 2));
|
||||
#endif
|
||||
|
||||
#if 0
|
||||
/* Check the first 1M */
|
||||
ram_check(0x00000000, 0x001000000);
|
||||
#endif
|
||||
}
|
||||
|
|
@ -0,0 +1,5 @@
|
|||
extern struct chip_operations mainboard_ibm_e326_ops;
|
||||
|
||||
struct mainboard_ibm_e326_config {
|
||||
int nothing;
|
||||
};
|
||||
|
|
@ -0,0 +1,96 @@
|
|||
entries
|
||||
|
||||
#start-bit length config config-ID name
|
||||
#0 8 r 0 seconds
|
||||
#8 8 r 0 alarm_seconds
|
||||
#16 8 r 0 minutes
|
||||
#24 8 r 0 alarm_minutes
|
||||
#32 8 r 0 hours
|
||||
#40 8 r 0 alarm_hours
|
||||
#48 8 r 0 day_of_week
|
||||
#56 8 r 0 day_of_month
|
||||
#64 8 r 0 month
|
||||
#72 8 r 0 year
|
||||
#80 4 r 0 rate_select
|
||||
#84 3 r 0 REF_Clock
|
||||
#87 1 r 0 UIP
|
||||
#88 1 r 0 auto_switch_DST
|
||||
#89 1 r 0 24_hour_mode
|
||||
#90 1 r 0 binary_values_enable
|
||||
#91 1 r 0 square-wave_out_enable
|
||||
#92 1 r 0 update_finished_enable
|
||||
#93 1 r 0 alarm_interrupt_enable
|
||||
#94 1 r 0 periodic_interrupt_enable
|
||||
#95 1 r 0 disable_clock_updates
|
||||
#96 288 r 0 temporary_filler
|
||||
0 384 r 0 reserved_memory
|
||||
384 1 e 4 boot_option
|
||||
385 1 e 4 last_boot
|
||||
386 1 e 1 ECC_memory
|
||||
388 4 r 0 reboot_bits
|
||||
392 3 e 5 baud_rate
|
||||
395 1 e 1 hw_scrubber
|
||||
396 1 e 1 interleave_chip_selects
|
||||
397 2 e 8 max_mem_clock
|
||||
400 1 e 1 power_on_after_fail
|
||||
412 4 e 6 debug_level
|
||||
416 4 e 7 boot_first
|
||||
420 4 e 7 boot_second
|
||||
424 4 e 7 boot_third
|
||||
428 4 h 0 boot_index
|
||||
432 8 h 0 boot_countdown
|
||||
440 4 e 9 slow_cpu
|
||||
444 1 e 1 nmi
|
||||
728 256 h 0 user_data
|
||||
984 16 h 0 check_sum
|
||||
# Reserve the extended AMD configuration registers
|
||||
1000 24 r 0 reserved_memory
|
||||
|
||||
|
||||
|
||||
enumerations
|
||||
|
||||
#ID value text
|
||||
1 0 Disable
|
||||
1 1 Enable
|
||||
2 0 Enable
|
||||
2 1 Disable
|
||||
4 0 Fallback
|
||||
4 1 Normal
|
||||
5 0 115200
|
||||
5 1 57600
|
||||
5 2 38400
|
||||
5 3 19200
|
||||
5 4 9600
|
||||
5 5 4800
|
||||
5 6 2400
|
||||
5 7 1200
|
||||
6 6 Notice
|
||||
6 7 Info
|
||||
6 8 Debug
|
||||
6 9 Spew
|
||||
7 0 Network
|
||||
7 1 HDD
|
||||
7 2 Floppy
|
||||
7 8 Fallback_Network
|
||||
7 9 Fallback_HDD
|
||||
7 10 Fallback_Floppy
|
||||
#7 3 ROM
|
||||
8 0 200Mhz
|
||||
8 1 166Mhz
|
||||
8 2 133Mhz
|
||||
8 3 100Mhz
|
||||
9 0 off
|
||||
9 1 87.5%
|
||||
9 2 75.0%
|
||||
9 3 62.5%
|
||||
9 4 50.0%
|
||||
9 5 37.5%
|
||||
9 6 25.0%
|
||||
9 7 12.5%
|
||||
|
||||
checksums
|
||||
|
||||
checksum 392 983 984
|
||||
|
||||
|
||||
|
|
@ -0,0 +1,72 @@
|
|||
#define ASSEMBLY 1
|
||||
#include <stdint.h>
|
||||
#include <device/pci_def.h>
|
||||
#include <device/pci_ids.h>
|
||||
#include <arch/io.h>
|
||||
#include <arch/romcc_io.h>
|
||||
#include <cpu/x86/lapic.h>
|
||||
#include "pc80/mc146818rtc_early.c"
|
||||
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
|
||||
#include "northbridge/amd/amdk8/early_ht.c"
|
||||
#include "cpu/x86/lapic/boot_cpu.c"
|
||||
#include "northbridge/amd/amdk8/reset_test.c"
|
||||
|
||||
static unsigned long main(unsigned long bist)
|
||||
{
|
||||
unsigned nodeid;
|
||||
/* Make cerain my local apic is useable */
|
||||
enable_lapic();
|
||||
|
||||
nodeid = lapicid() & 0xf;
|
||||
|
||||
/* Is this a cpu only reset? */
|
||||
if (cpu_init_detected(nodeid)) {
|
||||
if (last_boot_normal()) {
|
||||
goto normal_image;
|
||||
} else {
|
||||
goto cpu_reset;
|
||||
}
|
||||
}
|
||||
/* Is this a secondary cpu? */
|
||||
if (!boot_cpu()) {
|
||||
if (last_boot_normal()) {
|
||||
goto normal_image;
|
||||
} else {
|
||||
goto fallback_image;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/* Nothing special needs to be done to find bus 0 */
|
||||
/* Allow the HT devices to be found */
|
||||
enumerate_ht_chain();
|
||||
|
||||
/* Setup the 8111 */
|
||||
amd8111_enable_rom();
|
||||
|
||||
/* Is this a deliberate reset by the bios */
|
||||
if (bios_reset_detected() && last_boot_normal()) {
|
||||
goto normal_image;
|
||||
}
|
||||
/* This is the primary cpu how should I boot? */
|
||||
else if (do_normal_boot()) {
|
||||
goto normal_image;
|
||||
}
|
||||
else {
|
||||
goto fallback_image;
|
||||
}
|
||||
normal_image:
|
||||
asm volatile ("jmp __normal_image"
|
||||
: /* outputs */
|
||||
: "a" (bist) /* inputs */
|
||||
: /* clobbers */
|
||||
);
|
||||
cpu_reset:
|
||||
asm volatile ("jmp __cpu_reset"
|
||||
: /* outputs */
|
||||
: "a"(bist) /* inputs */
|
||||
: /* clobbers */
|
||||
);
|
||||
fallback_image:
|
||||
return bist;
|
||||
}
|
||||
|
|
@ -0,0 +1,61 @@
|
|||
#include <arch/pirq_routing.h>
|
||||
#include <device/pci.h>
|
||||
|
||||
#define IRQ_SLOT_COUNT 12
|
||||
#define IRQ_ROUTER_BUS 0
|
||||
#define IRQ_ROUTER_DEVFN PCI_DEVFN(4,3)
|
||||
#define IRQ_ROUTER_VENDOR 0x1022
|
||||
#define IRQ_ROUTER_DEVICE 0x746b
|
||||
|
||||
#define AVAILABLE_IRQS 0xdef8
|
||||
#define IRQ_SLOT(slot, bus, dev, fn, linka, linkb, linkc, linkd) \
|
||||
{ bus, (dev<<3)|fn, {{ linka, AVAILABLE_IRQS}, { linkb, AVAILABLE_IRQS}, \
|
||||
{linkc, AVAILABLE_IRQS}, {linkd, AVAILABLE_IRQS}}, slot, 0}
|
||||
|
||||
/* Each IRQ_SLOT entry consists of:
|
||||
* bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu
|
||||
*/
|
||||
|
||||
const struct irq_routing_table intel_irq_routing_table = {
|
||||
PIRQ_SIGNATURE, /* u32 signature */
|
||||
PIRQ_VERSION, /* u16 version */
|
||||
32+16*IRQ_SLOT_COUNT, /* there can be total IRQ_SLOT_COUNT table entries */
|
||||
IRQ_ROUTER_BUS, /* Where the interrupt router lies (bus) */
|
||||
IRQ_ROUTER_DEVFN, /* Where the interrupt router lies (dev) */
|
||||
0x00, /* IRQs devoted exclusively to PCI usage */
|
||||
IRQ_ROUTER_VENDOR, /* Vendor */
|
||||
IRQ_ROUTER_DEVICE, /* Device */
|
||||
0x00, /* Crap (miniport) */
|
||||
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
|
||||
0x34, /* u8 checksum , mod 256 checksum must give zero */
|
||||
{ /* slot(0=onboard), devfn, irqlinks (line id, 0=not routed) */
|
||||
/* Northbridge, Node 0 */
|
||||
IRQ_SLOT(0x0, 0x00,0x18,0x0, 0,0,0,0),
|
||||
/* AMD-8131 PCI-X Bridge */
|
||||
IRQ_SLOT(0x0, 0x01,0x01,0x0, 0,0,0,0),
|
||||
/* Onboard LSI SCSI Controller */
|
||||
IRQ_SLOT(0x0, 0x02,0x02,0x0, 3,0,0,0),
|
||||
/* Onboard Broadcom NICs */
|
||||
IRQ_SLOT(0x0, 0x02,0x01,0x0, 1,2,0,0),
|
||||
/* AMD-8131 PCI-X Bridge */
|
||||
IRQ_SLOT(0x0, 0x01,0x02,0x0, 0,0,0,0),
|
||||
/* PCI Slot 1-2 */
|
||||
IRQ_SLOT(0x1, 0x03,0x03,0x0, 1,2,3,4),
|
||||
IRQ_SLOT(0x2, 0x03,0x04,0x0, 2,3,4,1),
|
||||
/* AMD-8111 PCI Bridge */
|
||||
IRQ_SLOT(0x0, 0x01,0x03,0x0, 0,0,0,0),
|
||||
/* USB Controller */
|
||||
IRQ_SLOT(0x0, 0x04,0x00,0x0, 0,0,0,4),
|
||||
/* ATI Rage XL VGA */
|
||||
IRQ_SLOT(0x0, 0x04,0x05,0x0, 1,0,0,0),
|
||||
/* AMD-8111 LPC Dridge */
|
||||
IRQ_SLOT(0x0, 0x01,0x04,0x0, 0,0,0,0),
|
||||
/* Northbridge, Node 1 */
|
||||
IRQ_SLOT(0x0, 0x00,0x19,0x0, 0,0,0,0),
|
||||
|
||||
}
|
||||
};
|
||||
unsigned long write_pirq_routing_table(unsigned long addr)
|
||||
{
|
||||
return copy_pirq_routing_table(addr);
|
||||
}
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
#include <console/console.h>
|
||||
#include <device/device.h>
|
||||
#include <device/pci.h>
|
||||
#include <device/pci_ids.h>
|
||||
#include <device/pci_ops.h>
|
||||
#include "chip.h"
|
||||
|
||||
struct chip_operations mainboard_ibm_e326_ops = {
|
||||
CHIP_NAME("IBM E326 mainboard ")
|
||||
};
|
||||
|
|
@ -0,0 +1,175 @@
|
|||
#include <console/console.h>
|
||||
#include <arch/smp/mpspec.h>
|
||||
#include <device/pci.h>
|
||||
#include <string.h>
|
||||
#include <stdint.h>
|
||||
|
||||
void *smp_write_config_table(void *v)
|
||||
{
|
||||
static const char sig[4] = "PCMP";
|
||||
static const char oem[8] = "IBM ";
|
||||
static const char productid[12] = "E325 ";
|
||||
struct mp_config_table *mc;
|
||||
|
||||
unsigned char bus_num;
|
||||
unsigned char bus_isa;
|
||||
unsigned char bus_8111_0;
|
||||
unsigned char bus_8111_1;
|
||||
unsigned char bus_8131_1;
|
||||
unsigned char bus_8131_2;
|
||||
|
||||
mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
|
||||
memset(mc, 0, sizeof(*mc));
|
||||
|
||||
memcpy(mc->mpc_signature, sig, sizeof(sig));
|
||||
mc->mpc_length = sizeof(*mc); /* initially just the header */
|
||||
mc->mpc_spec = 0x04;
|
||||
mc->mpc_checksum = 0; /* not yet computed */
|
||||
memcpy(mc->mpc_oem, oem, sizeof(oem));
|
||||
memcpy(mc->mpc_productid, productid, sizeof(productid));
|
||||
mc->mpc_oemptr = 0;
|
||||
mc->mpc_oemsize = 0;
|
||||
mc->mpc_entry_count = 0; /* No entries yet... */
|
||||
mc->mpc_lapic = LAPIC_ADDR;
|
||||
mc->mpe_length = 0;
|
||||
mc->mpe_checksum = 0;
|
||||
mc->reserved = 0;
|
||||
|
||||
smp_write_processors(mc);
|
||||
|
||||
{
|
||||
device_t dev;
|
||||
|
||||
/* 8111 */
|
||||
dev = dev_find_slot(1, PCI_DEVFN(0x03,0));
|
||||
if (dev) {
|
||||
bus_8111_0 = pci_read_config8(dev, PCI_PRIMARY_BUS);
|
||||
bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
|
||||
bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
|
||||
bus_isa++;
|
||||
} else {
|
||||
printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n");
|
||||
bus_8111_1 = 4;
|
||||
bus_isa = 5;
|
||||
}
|
||||
|
||||
/* 8131-1 */
|
||||
dev = dev_find_slot(1, PCI_DEVFN(0x01,0));
|
||||
if (dev) {
|
||||
bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
|
||||
|
||||
} else {
|
||||
printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n");
|
||||
bus_8131_1 = 2;
|
||||
}
|
||||
|
||||
/* 8131-2 */
|
||||
dev = dev_find_slot(1, PCI_DEVFN(0x02,0));
|
||||
if (dev) {
|
||||
bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
|
||||
} else {
|
||||
printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n");
|
||||
bus_8131_2 = 3;
|
||||
}
|
||||
}
|
||||
|
||||
/* define bus and isa numbers */
|
||||
for (bus_num = 0; bus_num < bus_isa; bus_num++) {
|
||||
smp_write_bus(mc, bus_num, "PCI ");
|
||||
}
|
||||
smp_write_bus(mc, bus_isa, "ISA ");
|
||||
|
||||
/* Legacy IOAPIC #2 */
|
||||
smp_write_ioapic(mc, 2, 0x11, 0xfec00000);
|
||||
{
|
||||
device_t dev;
|
||||
struct resource *res;
|
||||
/* 8131-1 apic #3 */
|
||||
dev = dev_find_slot(1, PCI_DEVFN(0x01,1));
|
||||
if (dev) {
|
||||
res = find_resource(dev, PCI_BASE_ADDRESS_0);
|
||||
if (res) {
|
||||
smp_write_ioapic(mc, 0x03, 0x11, res->base);
|
||||
}
|
||||
}
|
||||
/* 8131-2 apic #4 */
|
||||
dev = dev_find_slot(1, PCI_DEVFN(0x02,1));
|
||||
if (dev) {
|
||||
res = find_resource(dev, PCI_BASE_ADDRESS_0);
|
||||
if (res) {
|
||||
smp_write_ioapic(mc, 0x04, 0x11, res->base);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/* ISA backward compatibility interrupts */
|
||||
smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x00, 0x02, 0x00);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x01, 0x02, 0x01);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x00, 0x02, 0x02);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x03, 0x02, 0x03);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x04, 0x02, 0x04);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x05, 0x02, 0x05);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x06, 0x02, 0x06);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x07, 0x02, 0x07);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x08, 0x02, 0x08);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x09, 0x02, 0x09);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x0a, 0x02, 0x0a);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x0b, 0x02, 0x0b);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x0c, 0x02, 0x0c);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x0d, 0x02, 0x0d);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x0e, 0x02, 0x0e);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x0f, 0x02, 0x0f);
|
||||
|
||||
/* PCI Ints: Type Polarity Trigger Bus ID PCIDEVNUM|IRQ APIC ID PIN# */
|
||||
/* Integrated SMBus 2.0 */
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_0, (0x04<<2)|3, 0x2, 0x13);
|
||||
/* Integrated AMD AC97 Audio */
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_0, (0x04<<2)|1, 0x2, 0x11);
|
||||
|
||||
/* Integrated AMD USB */
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_1, (0x00<<2)|3, 0x2, 0x13);
|
||||
|
||||
/* On board ATI Rage XL */
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_1, (0x05<<2)|0, 0x2, 0x10);
|
||||
|
||||
/* On board Broadcom nics */
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x01<<2)|0, 0x3, 0x00);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x01<<2)|1, 0x3, 0x01);
|
||||
|
||||
/* On board LSI SCSI */
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x02<<2)|0, 0x3, 0x02);
|
||||
|
||||
/* PCI Slot 1 PCIX */
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|0, 0x2, 0x10);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|1, 0x2, 0x11);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|2, 0x2, 0x12);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|3, 0x2, 0x13);
|
||||
|
||||
/* PCI Slot 2 PCIX */
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|0, 0x2, 0x11);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|1, 0x2, 0x12);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|2, 0x2, 0x13);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|3, 0x2, 0x10);
|
||||
|
||||
/* Standard local interrupt assignments:
|
||||
* Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
|
||||
smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x00, MP_APIC_ALL, 0x00);
|
||||
smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x00, MP_APIC_ALL, 0x01);
|
||||
|
||||
/* There is no extension information... */
|
||||
|
||||
/* Compute the checksums */
|
||||
mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
|
||||
mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
|
||||
printk_debug("Wrote the mp table end at: %p - %p\n",
|
||||
mc, smp_next_mpe_entry(mc));
|
||||
return smp_next_mpe_entry(mc);
|
||||
}
|
||||
|
||||
unsigned long write_smp_table(unsigned long addr)
|
||||
{
|
||||
void *v;
|
||||
v = smp_write_floating_table(addr);
|
||||
return (unsigned long)smp_write_config_table(v);
|
||||
}
|
||||
|
||||
|
|
@ -0,0 +1,271 @@
|
|||
/*
|
||||
* IBM E325 needs a different resource map
|
||||
*
|
||||
*/
|
||||
|
||||
static void setup_ibm_e326_resource_map(void)
|
||||
{
|
||||
static const unsigned int register_values[] = {
|
||||
/* Careful set limit registers before base registers which contain the enables */
|
||||
/* DRAM Limit i Registers
|
||||
* F1:0x44 i = 0
|
||||
* F1:0x4C i = 1
|
||||
* F1:0x54 i = 2
|
||||
* F1:0x5C i = 3
|
||||
* F1:0x64 i = 4
|
||||
* F1:0x6C i = 5
|
||||
* F1:0x74 i = 6
|
||||
* F1:0x7C i = 7
|
||||
* [ 2: 0] Destination Node ID
|
||||
* 000 = Node 0
|
||||
* 001 = Node 1
|
||||
* 010 = Node 2
|
||||
* 011 = Node 3
|
||||
* 100 = Node 4
|
||||
* 101 = Node 5
|
||||
* 110 = Node 6
|
||||
* 111 = Node 7
|
||||
* [ 7: 3] Reserved
|
||||
* [10: 8] Interleave select
|
||||
* specifies the values of A[14:12] to use with interleave enable.
|
||||
* [15:11] Reserved
|
||||
* [31:16] DRAM Limit Address i Bits 39-24
|
||||
* This field defines the upper address bits of a 40 bit address
|
||||
* that define the end of the DRAM region.
|
||||
*/
|
||||
PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
|
||||
PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
|
||||
PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
|
||||
PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
|
||||
PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
|
||||
PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
|
||||
PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
|
||||
/* DRAM Base i Registers
|
||||
* F1:0x40 i = 0
|
||||
* F1:0x48 i = 1
|
||||
* F1:0x50 i = 2
|
||||
* F1:0x58 i = 3
|
||||
* F1:0x60 i = 4
|
||||
* F1:0x68 i = 5
|
||||
* F1:0x70 i = 6
|
||||
* F1:0x78 i = 7
|
||||
* [ 0: 0] Read Enable
|
||||
* 0 = Reads Disabled
|
||||
* 1 = Reads Enabled
|
||||
* [ 1: 1] Write Enable
|
||||
* 0 = Writes Disabled
|
||||
* 1 = Writes Enabled
|
||||
* [ 7: 2] Reserved
|
||||
* [10: 8] Interleave Enable
|
||||
* 000 = No interleave
|
||||
* 001 = Interleave on A[12] (2 nodes)
|
||||
* 010 = reserved
|
||||
* 011 = Interleave on A[12] and A[14] (4 nodes)
|
||||
* 100 = reserved
|
||||
* 101 = reserved
|
||||
* 110 = reserved
|
||||
* 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
|
||||
* [15:11] Reserved
|
||||
* [13:16] DRAM Base Address i Bits 39-24
|
||||
* This field defines the upper address bits of a 40-bit address
|
||||
* that define the start of the DRAM region.
|
||||
*/
|
||||
PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
|
||||
/* Memory-Mapped I/O Limit i Registers
|
||||
* F1:0x84 i = 0
|
||||
* F1:0x8C i = 1
|
||||
* F1:0x94 i = 2
|
||||
* F1:0x9C i = 3
|
||||
* F1:0xA4 i = 4
|
||||
* F1:0xAC i = 5
|
||||
* F1:0xB4 i = 6
|
||||
* F1:0xBC i = 7
|
||||
* [ 2: 0] Destination Node ID
|
||||
* 000 = Node 0
|
||||
* 001 = Node 1
|
||||
* 010 = Node 2
|
||||
* 011 = Node 3
|
||||
* 100 = Node 4
|
||||
* 101 = Node 5
|
||||
* 110 = Node 6
|
||||
* 111 = Node 7
|
||||
* [ 3: 3] Reserved
|
||||
* [ 5: 4] Destination Link ID
|
||||
* 00 = Link 0
|
||||
* 01 = Link 1
|
||||
* 10 = Link 2
|
||||
* 11 = Reserved
|
||||
* [ 6: 6] Reserved
|
||||
* [ 7: 7] Non-Posted
|
||||
* 0 = CPU writes may be posted
|
||||
* 1 = CPU writes must be non-posted
|
||||
* [31: 8] Memory-Mapped I/O Limit Address i (39-16)
|
||||
* This field defines the upp adddress bits of a 40-bit address that
|
||||
* defines the end of a memory-mapped I/O region n
|
||||
*/
|
||||
/* Memory-Mapped I/O Base i Registers
|
||||
* F1:0x80 i = 0
|
||||
* F1:0x88 i = 1
|
||||
* F1:0x90 i = 2
|
||||
* F1:0x98 i = 3
|
||||
* F1:0xA0 i = 4
|
||||
* F1:0xA8 i = 5
|
||||
* F1:0xB0 i = 6
|
||||
* F1:0xB8 i = 7
|
||||
* [ 0: 0] Read Enable
|
||||
* 0 = Reads disabled
|
||||
* 1 = Reads Enabled
|
||||
* [ 1: 1] Write Enable
|
||||
* 0 = Writes disabled
|
||||
* 1 = Writes Enabled
|
||||
* [ 2: 2] Cpu Disable
|
||||
* 0 = Cpu can use this I/O range
|
||||
* 1 = Cpu requests do not use this I/O range
|
||||
* [ 3: 3] Lock
|
||||
* 0 = base/limit registers i are read/write
|
||||
* 1 = base/limit registers i are read-only
|
||||
* [ 7: 4] Reserved
|
||||
* [31: 8] Memory-Mapped I/O Base Address i (39-16)
|
||||
* This field defines the upper address bits of a 40bit address
|
||||
* that defines the start of memory-mapped I/O region i
|
||||
*/
|
||||
|
||||
PCI_ADDR(0, 0x18, 1, 0xbc), 0x48, 0xfe2f10,
|
||||
PCI_ADDR(0, 0x18, 1, 0xb8), 0xf0, 0xfc0003,
|
||||
//PCI_ADDR(0, 0x18, 1, 0xbc), 0x48, 0x0,
|
||||
// PCI_ADDR(0, 0x18, 1, 0xb8), 0xf0, 0x0,
|
||||
|
||||
PCI_ADDR(0, 0x18, 1, 0xb4), 0x48, 0xfec010,
|
||||
PCI_ADDR(0, 0x18, 1, 0xb0), 0xf0, 0xfec003,
|
||||
//PCI_ADDR(0, 0x18, 1, 0xb4), 0x48, 0x0,
|
||||
//PCI_ADDR(0, 0x18, 1, 0xb0), 0xf0, 0x0,
|
||||
|
||||
PCI_ADDR(0, 0x18, 1, 0xac), 0x48, 0xb10,
|
||||
PCI_ADDR(0, 0x18, 1, 0xa8), 0xf0, 0xa03,
|
||||
//PCI_ADDR(0, 0x18, 1, 0xac), 0x48, 0x0,
|
||||
//PCI_ADDR(0, 0x18, 1, 0xa8), 0xf0, 0x0,
|
||||
|
||||
PCI_ADDR(0, 0x18, 1, 0xa4), 0x48, 0xfed010,
|
||||
PCI_ADDR(0, 0x18, 1, 0xa0), 0xf0, 0xfed003,
|
||||
//PCI_ADDR(0, 0x18, 1, 0xa4), 0x48, 0x0,
|
||||
//PCI_ADDR(0, 0x18, 1, 0xa0), 0xf0, 0x0,
|
||||
|
||||
PCI_ADDR(0, 0x18, 1, 0x9c), 0x48, 0x0,
|
||||
PCI_ADDR(0, 0x18, 1, 0x98), 0xf0, 0x0,
|
||||
PCI_ADDR(0, 0x18, 1, 0x94), 0x48, 0x0,
|
||||
PCI_ADDR(0, 0x18, 1, 0x90), 0xf0, 0x0,
|
||||
PCI_ADDR(0, 0x18, 1, 0x8c), 0x48, 0x0,
|
||||
PCI_ADDR(0, 0x18, 1, 0x88), 0xf0, 0x0,
|
||||
PCI_ADDR(0, 0x18, 1, 0x84), 0x48, 0x0,
|
||||
PCI_ADDR(0, 0x18, 1, 0x80), 0xf0, 0x0,
|
||||
/* PCI I/O Limit i Registers
|
||||
* F1:0xC4 i = 0
|
||||
* F1:0xCC i = 1
|
||||
* F1:0xD4 i = 2
|
||||
* F1:0xDC i = 3
|
||||
* [ 2: 0] Destination Node ID
|
||||
* 000 = Node 0
|
||||
* 001 = Node 1
|
||||
* 010 = Node 2
|
||||
* 011 = Node 3
|
||||
* 100 = Node 4
|
||||
* 101 = Node 5
|
||||
* 110 = Node 6
|
||||
* 111 = Node 7
|
||||
* [ 3: 3] Reserved
|
||||
* [ 5: 4] Destination Link ID
|
||||
* 00 = Link 0
|
||||
* 01 = Link 1
|
||||
* 10 = Link 2
|
||||
* 11 = reserved
|
||||
* [11: 6] Reserved
|
||||
* [24:12] PCI I/O Limit Address i
|
||||
* This field defines the end of PCI I/O region n
|
||||
* [31:25] Reserved
|
||||
*/
|
||||
/* PCI I/O Base i Registers
|
||||
* F1:0xC0 i = 0
|
||||
* F1:0xC8 i = 1
|
||||
* F1:0xD0 i = 2
|
||||
* F1:0xD8 i = 3
|
||||
* [ 0: 0] Read Enable
|
||||
* 0 = Reads Disabled
|
||||
* 1 = Reads Enabled
|
||||
* [ 1: 1] Write Enable
|
||||
* 0 = Writes Disabled
|
||||
* 1 = Writes Enabled
|
||||
* [ 3: 2] Reserved
|
||||
* [ 4: 4] VGA Enable
|
||||
* 0 = VGA matches Disabled
|
||||
* 1 = matches all address < 64K and where A[9:0] is in the
|
||||
* range 3B0-3BB or 3C0-3DF independen of the base & limit registers
|
||||
* [ 5: 5] ISA Enable
|
||||
* 0 = ISA matches Disabled
|
||||
* 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
|
||||
* from matching agains this base/limit pair
|
||||
* [11: 6] Reserved
|
||||
* [24:12] PCI I/O Base i
|
||||
* This field defines the start of PCI I/O region n
|
||||
* [31:25] Reserved
|
||||
*/
|
||||
PCI_ADDR(0, 0x18, 1, 0xdc), 0xFE000FC8, 0x1fff010,
|
||||
PCI_ADDR(0, 0x18, 1, 0xd8), 0xFE000FCC, 0x33,
|
||||
PCI_ADDR(0, 0x18, 1, 0xd4), 0xFE000FC8, 0x0,
|
||||
PCI_ADDR(0, 0x18, 1, 0xd0), 0xFE000FCC, 0x0,
|
||||
PCI_ADDR(0, 0x18, 1, 0xcc), 0xFE000FC8, 0x0,
|
||||
PCI_ADDR(0, 0x18, 1, 0xc8), 0xFE000FCC, 0x0,
|
||||
PCI_ADDR(0, 0x18, 1, 0xc4), 0xFE000FC8, 0x0,
|
||||
PCI_ADDR(0, 0x18, 1, 0xc0), 0xFE000FCC, 0x0,
|
||||
/* Config Base and Limit i Registers
|
||||
* F1:0xE0 i = 0
|
||||
* F1:0xE4 i = 1
|
||||
* F1:0xE8 i = 2
|
||||
* F1:0xEC i = 3
|
||||
* [ 0: 0] Read Enable
|
||||
* 0 = Reads Disabled
|
||||
* 1 = Reads Enabled
|
||||
* [ 1: 1] Write Enable
|
||||
* 0 = Writes Disabled
|
||||
* 1 = Writes Enabled
|
||||
* [ 2: 2] Device Number Compare Enable
|
||||
* 0 = The ranges are based on bus number
|
||||
* 1 = The ranges are ranges of devices on bus 0
|
||||
* [ 3: 3] Reserved
|
||||
* [ 6: 4] Destination Node
|
||||
* 000 = Node 0
|
||||
* 001 = Node 1
|
||||
* 010 = Node 2
|
||||
* 011 = Node 3
|
||||
* 100 = Node 4
|
||||
* 101 = Node 5
|
||||
* 110 = Node 6
|
||||
* 111 = Node 7
|
||||
* [ 7: 7] Reserved
|
||||
* [ 9: 8] Destination Link
|
||||
* 00 = Link 0
|
||||
* 01 = Link 1
|
||||
* 10 = Link 2
|
||||
* 11 - Reserved
|
||||
* [15:10] Reserved
|
||||
* [23:16] Bus Number Base i
|
||||
* This field defines the lowest bus number in configuration region i
|
||||
* [31:24] Bus Number Limit i
|
||||
* This field defines the highest bus number in configuration regin i
|
||||
*/
|
||||
PCI_ADDR(0, 0x18, 1, 0xe0), 0x0000FC88, 0xff040103,
|
||||
PCI_ADDR(0, 0x18, 1, 0xe4), 0x0000FC88, 0,
|
||||
PCI_ADDR(0, 0x18, 1, 0xe8), 0x0000FC88, 0,
|
||||
PCI_ADDR(0, 0x18, 1, 0xec), 0x0000FC88, 0,
|
||||
};
|
||||
int max;
|
||||
max = sizeof(register_values)/sizeof(register_values[0]);
|
||||
setup_resource_map(register_values, max);
|
||||
}
|
||||
Loading…
Reference in New Issue