GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Add Options.lb to various motherboard ports 

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1738 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Eric Biederman 2004-11-04 11:09:12 +00:00
parent 018d8dd60f
commit 23bc47db17
5 changed files with 718 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

219
src/mainboard/Iwill/DK8S2/Options.lb Normal file
View File

@ -0,0 +1,219 @@
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses USE_FALLBACK_IMAGE
uses HAVE_FALLBACK_BOOT
uses HAVE_HARD_RESET
uses HARD_RESET_BUS
uses HARD_RESET_DEVICE
uses HARD_RESET_FUNCTION
uses IRQ_SLOT_COUNT
uses HAVE_OPTION_TABLE
uses CONFIG_MAX_CPUS
uses CONFIG_IOAPIC
uses CONFIG_SMP
uses FALLBACK_SIZE
uses ROM_SIZE
uses ROM_SECTION_SIZE
uses ROM_IMAGE_SIZE
uses ROM_SECTION_SIZE
uses ROM_SECTION_OFFSET
uses CONFIG_ROM_STREAM
uses CONFIG_ROM_STREAM_START
uses PAYLOAD_SIZE
uses _ROMBASE
uses XIP_ROM_SIZE
uses XIP_ROM_BASE
uses STACK_SIZE
uses HEAP_SIZE
uses USE_OPTION_TABLE
uses LB_CKS_RANGE_START
uses LB_CKS_RANGE_END
uses LB_CKS_LOC
uses MAINBOARD
uses MAINBOARD_PART_NUMBER
uses MAINBOARD_VENDOR
uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
uses LINUXBIOS_EXTRA_VERSION
uses _RAMBASE
uses CC
uses HOSTCC
uses TTYS0_BAUD
uses TTYS0_BASE
uses TTYS0_LCS
uses DEFAULT_CONSOLE_LOGLEVEL
uses MAXIMUM_CONSOLE_LOGLEVEL
uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
uses CONFIG_CONSOLE_SERIAL8250
uses HAVE_INIT_TIMER
uses CONFIG_GDB_STUB
## ROM_SIZE is the size of boot ROM that this board will use.
default ROM_SIZE=524288
###
### Build options
###
##
## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
##
default FALLBACK_SIZE=131072
##
## Build code for the fallback boot
##
default HAVE_FALLBACK_BOOT=1
##
## Build code to reset the motherboard from linuxBIOS
##
default HAVE_HARD_RESET=1
##
## Funky hard reset implementation
##
default HARD_RESET_BUS=1
default HARD_RESET_DEVICE=4
default HARD_RESET_FUNCTION=0
##
## Build code to export a programmable irq routing table
##
default HAVE_PIRQ_TABLE=1
default IRQ_SLOT_COUNT=9
##
## Build code to export an x86 MP table
## Useful for specifying IRQ routing values
##
default HAVE_MP_TABLE=1
##
## Build code to export a CMOS option table
##
default HAVE_OPTION_TABLE=1
##
## Move the default LinuxBIOS cmos range off of AMD RTC registers
##
default LB_CKS_RANGE_START=49
default LB_CKS_RANGE_END=122
default LB_CKS_LOC=123
##
## Build code for SMP support
## Only worry about 2 micro processors
##
default CONFIG_SMP=1
default CONFIG_MAX_CPUS=2
##
## Build code to setup a generic IOAPIC
##
default CONFIG_IOAPIC=1
##
## Clean up the motherboard id strings
##
default MAINBOARD_PART_NUMBER="HDAMA"
default MAINBOARD_VENDOR="ARIMA"
default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x161f
default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3016
###
### LinuxBIOS layout values
###
## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
default ROM_IMAGE_SIZE = 65536
##
## Use a small 8K stack
##
default STACK_SIZE=0x2000
##
## Use a small 16K heap
##
default HEAP_SIZE=0x4000
##
## Only use the option table in a normal image
##
default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
##
## LinuxBIOS C code runs at this location in RAM
##
default _RAMBASE=0x00004000
##
## Load the payload from the ROM
##
default CONFIG_ROM_STREAM = 1
###
### Defaults of options that you may want to override in the target config file
###
##
## The default compiler
##
#default CC="gcc"
#default HOSTCC="gcc"
##
## Disable the gdb stub by default
##
default CONFIG_GDB_STUB=0
##
## The Serial Console
##
# To Enable the Serial Console
default CONFIG_CONSOLE_SERIAL8250=1
## Select the serial console baud rate
default TTYS0_BAUD=115200
#default TTYS0_BAUD=57600
#default TTYS0_BAUD=38400
#default TTYS0_BAUD=19200
#default TTYS0_BAUD=9600
#default TTYS0_BAUD=4800
#default TTYS0_BAUD=2400
#default TTYS0_BAUD=1200
# Select the serial console base port
default TTYS0_BASE=0x3f8
# Select the serial protocol
# This defaults to 8 data bits, 1 stop bit, and no parity
default TTYS0_LCS=0x3
##
### Select the linuxBIOS loglevel
##
## EMERG 1 system is unusable
## ALERT 2 action must be taken immediately
## CRIT 3 critical conditions
## ERR 4 error conditions
## WARNING 5 warning conditions
## NOTICE 6 normal but significant condition
## INFO 7 informational
## DEBUG 8 debug-level messages
## SPEW 9 Way too many details
## Request this level of debugging output
default DEFAULT_CONSOLE_LOGLEVEL=8
## At a maximum only compile in this level of debugging
default MAXIMUM_CONSOLE_LOGLEVEL=8
##
## Select power on after power fail setting
default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
### End Options.lb
end

218
src/mainboard/Iwill/DK8X/Options.lb Normal file
View File

@ -0,0 +1,218 @@
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses USE_FALLBACK_IMAGE
uses HAVE_FALLBACK_BOOT
uses HAVE_HARD_RESET
uses HARD_RESET_BUS
uses HARD_RESET_DEVICE
uses HARD_RESET_FUNCTION
uses IRQ_SLOT_COUNT
uses HAVE_OPTION_TABLE
uses CONFIG_MAX_CPUS
uses CONFIG_IOAPIC
uses CONFIG_SMP
uses FALLBACK_SIZE
uses ROM_SIZE
uses ROM_SECTION_SIZE
uses ROM_IMAGE_SIZE
uses ROM_SECTION_SIZE
uses ROM_SECTION_OFFSET
uses CONFIG_ROM_STREAM
uses CONFIG_ROM_STREAM_START
uses PAYLOAD_SIZE
uses _ROMBASE
uses XIP_ROM_SIZE
uses XIP_ROM_BASE
uses STACK_SIZE
uses HEAP_SIZE
uses USE_OPTION_TABLE
uses LB_CKS_RANGE_START
uses LB_CKS_RANGE_END
uses LB_CKS_LOC
uses MAINBOARD
uses MAINBOARD_PART_NUMBER
uses MAINBOARD_VENDOR
uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
uses LINUXBIOS_EXTRA_VERSION
uses _RAMBASE
uses CC
uses HOSTCC
uses TTYS0_BAUD
uses TTYS0_BASE
uses TTYS0_LCS
uses DEFAULT_CONSOLE_LOGLEVEL
uses MAXIMUM_CONSOLE_LOGLEVEL
uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
uses CONFIG_CONSOLE_SERIAL8250
uses HAVE_INIT_TIMER
uses CONFIG_GDB_STUB
## ROM_SIZE is the size of boot ROM that this board will use.
default ROM_SIZE=524288
###
### Build options
###
##
## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
##
default FALLBACK_SIZE=131072
##
## Build code for the fallback boot
##
default HAVE_FALLBACK_BOOT=1
##
## Build code to reset the motherboard from linuxBIOS
##
default HAVE_HARD_RESET=1
##
## Funky hard reset implementation
##
default HARD_RESET_BUS=1
default HARD_RESET_DEVICE=4
default HARD_RESET_FUNCTION=0
##
## Build code to export a programmable irq routing table
##
default HAVE_PIRQ_TABLE=1
default IRQ_SLOT_COUNT=9
##
## Build code to export an x86 MP table
## Useful for specifying IRQ routing values
##
default HAVE_MP_TABLE=1
##
## Build code to export a CMOS option table
##
default HAVE_OPTION_TABLE=1
##
## Move the default LinuxBIOS cmos range off of AMD RTC registers
##
default LB_CKS_RANGE_START=49
default LB_CKS_RANGE_END=122
default LB_CKS_LOC=123
##
## Build code for SMP support
## Only worry about 2 micro processors
##
default CONFIG_SMP=1
default CONFIG_MAX_CPUS=2
##
## Build code to setup a generic IOAPIC
##
default CONFIG_IOAPIC=1
##
## Clean up the motherboard id strings
##
#default MAINBOARD_PART_NUMBER="HDAMA"
#default MAINBOARD_VENDOR="ARIMA"
#default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x161f
#default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3016
###
### LinuxBIOS layout values
###
## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
default ROM_IMAGE_SIZE = 65536
##
## Use a small 8K stack
##
default STACK_SIZE=0x2000
##
## Use a small 16K heap
##
default HEAP_SIZE=0x4000
##
## Only use the option table in a normal image
##
default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
##
## LinuxBIOS C code runs at this location in RAM
##
default _RAMBASE=0x00004000
##
## Load the payload from the ROM
##
default CONFIG_ROM_STREAM = 1
###
### Defaults of options that you may want to override in the target config file
###
##
## The default compiler
##
#default CC="gcc"
#default HOSTCC="gcc"
##
## Disable the gdb stub by default
##
default CONFIG_GDB_STUB=0
##
## The Serial Console
##
# To Enable the Serial Console
default CONFIG_CONSOLE_SERIAL8250=1
## Select the serial console baud rate
default TTYS0_BAUD=115200
#default TTYS0_BAUD=57600
#default TTYS0_BAUD=38400
#default TTYS0_BAUD=19200
#default TTYS0_BAUD=9600
#default TTYS0_BAUD=4800
#default TTYS0_BAUD=2400
#default TTYS0_BAUD=1200
# Select the serial console base port
default TTYS0_BASE=0x3f8
# Select the serial protocol
# This defaults to 8 data bits, 1 stop bit, and no parity
default TTYS0_LCS=0x3
##
### Select the linuxBIOS loglevel
##
## EMERG 1 system is unusable
## ALERT 2 action must be taken immediately
## CRIT 3 critical conditions
## ERR 4 error conditions
## WARNING 5 warning conditions
## NOTICE 6 normal but significant condition
## INFO 7 informational
## DEBUG 8 debug-level messages
## SPEW 9 Way too many details
## Request this level of debugging output
default DEFAULT_CONSOLE_LOGLEVEL=8
## At a maximum only compile in this level of debugging
default MAXIMUM_CONSOLE_LOGLEVEL=8
##
## Select power on after power fail setting
default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
### End Options.lb
end

92
src/mainboard/densitron/dpx114/Options.lb Normal file
View File

@ -0,0 +1,92 @@
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses USE_FALLBACK_IMAGE
uses HAVE_FALLBACK_BOOT
uses HAVE_HARD_RESET
uses HAVE_OPTION_TABLE
uses USE_OPTION_TABLE
uses CONFIG_ROM_STREAM
uses IRQ_SLOT_COUNT
uses MAINBOARD
uses MAINBOARD_VENDOR
uses MAINBOARD_PART_NUMBER
uses LINUXBIOS_EXTRA_VERSION
uses ARCH
uses FALLBACK_SIZE
uses STACK_SIZE
uses HEAP_SIZE
uses ROM_SIZE
uses ROM_SECTION_SIZE
uses ROM_IMAGE_SIZE
uses ROM_SECTION_SIZE
uses ROM_SECTION_OFFSET
uses CONFIG_ROM_STREAM_START
uses PAYLOAD_SIZE
uses _ROMBASE
uses _RAMBASE
uses XIP_ROM_SIZE
uses XIP_ROM_BASE
uses HAVE_MP_TABLE
## ROM_SIZE is the size of boot ROM that this board will use.
default ROM_SIZE = 256*1024
###
### Build options
###
##
## Build code for the fallback boot
##
default HAVE_FALLBACK_BOOT=1
##
## no MP table
##
default HAVE_MP_TABLE=0
##
## Build code to reset the motherboard from linuxBIOS
##
default HAVE_HARD_RESET=1
##
## Build code to export a programmable irq routing table
##
default HAVE_PIRQ_TABLE=1
default IRQ_SLOT_COUNT=5
##
## Build code to export a CMOS option table
##
default HAVE_OPTION_TABLE=1
###
### LinuxBIOS layout values
###
## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
default ROM_IMAGE_SIZE = 65536
default FALLBACK_SIZE = 131072
##
## Use a small 8K stack
##
default STACK_SIZE=0x2000
##
## Use a small 16K heap
##
default HEAP_SIZE=0x4000
##
## Only use the option table in a normal image
##
#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
default USE_OPTION_TABLE = 0
default _RAMBASE = 0x00004000
default CONFIG_ROM_STREAM = 1
end

95
src/mainboard/digitallogic/adl855pc/Options.lb Normal file
View File

@ -0,0 +1,95 @@
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses USE_FALLBACK_IMAGE
uses HAVE_FALLBACK_BOOT
uses HAVE_HARD_RESET
uses HAVE_OPTION_TABLE
uses USE_OPTION_TABLE
uses CONFIG_ROM_STREAM
uses IRQ_SLOT_COUNT
uses MAINBOARD
uses MAINBOARD_VENDOR
uses MAINBOARD_PART_NUMBER
uses LINUXBIOS_EXTRA_VERSION
uses ARCH
uses FALLBACK_SIZE
uses STACK_SIZE
uses HEAP_SIZE
uses ROM_SIZE
uses ROM_SECTION_SIZE
uses ROM_IMAGE_SIZE
uses ROM_SECTION_SIZE
uses ROM_SECTION_OFFSET
uses CONFIG_ROM_STREAM_START
uses PAYLOAD_SIZE
uses _ROMBASE
uses _RAMBASE
uses XIP_ROM_SIZE
uses XIP_ROM_BASE
uses HAVE_MP_TABLE
## ROM_SIZE is the size of boot ROM that this board will use.
default ROM_SIZE = 256*1024
###
### Build options
###
##
## Build code for the fallback boot
##
default HAVE_FALLBACK_BOOT=1
##
## no MP table
##
default HAVE_MP_TABLE=0
##
## Build code to reset the motherboard from linuxBIOS
##
default HAVE_HARD_RESET=1
##
## Build code to export a programmable irq routing table
##
default HAVE_PIRQ_TABLE=1
default IRQ_SLOT_COUNT=5
#object irq_tables.o
##
## Build code to export a CMOS option table
##
default HAVE_OPTION_TABLE=1
###
### LinuxBIOS layout values
###
## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
default ROM_IMAGE_SIZE = 65536
default FALLBACK_SIZE = 131072
##
## Use a small 8K stack
##
default STACK_SIZE=0x2000
##
## Use a small 16K heap
##
default HEAP_SIZE=0x4000
##
## Only use the option table in a normal image
##
#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
default USE_OPTION_TABLE = 0
default _RAMBASE = 0x00004000
default CONFIG_ROM_STREAM = 1
end

94
src/mainboard/via/epia-m/Options.lb Normal file
View File

@ -0,0 +1,94 @@
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses USE_FALLBACK_IMAGE
uses HAVE_FALLBACK_BOOT
uses HAVE_HARD_RESET
uses HAVE_OPTION_TABLE
uses USE_OPTION_TABLE
uses CONFIG_ROM_STREAM
uses IRQ_SLOT_COUNT
uses MAINBOARD
uses MAINBOARD_VENDOR
uses MAINBOARD_PART_NUMBER
uses LINUXBIOS_EXTRA_VERSION
uses ARCH
uses FALLBACK_SIZE
uses STACK_SIZE
uses HEAP_SIZE
uses ROM_SIZE
uses ROM_SECTION_SIZE
uses ROM_IMAGE_SIZE
uses ROM_SECTION_SIZE
uses ROM_SECTION_OFFSET
uses CONFIG_ROM_STREAM_START
uses PAYLOAD_SIZE
uses _ROMBASE
uses _RAMBASE
uses XIP_ROM_SIZE
uses XIP_ROM_BASE
uses HAVE_MP_TABLE
uses HAVE_ACPI_TABLES
## ROM_SIZE is the size of boot ROM that this board will use.
default ROM_SIZE = 256*1024
###
### Build options
###
##
## Build code for the fallback boot
##
default HAVE_FALLBACK_BOOT=1
##
## no MP table
##
default HAVE_MP_TABLE=0
##
## Build code to reset the motherboard from linuxBIOS
##
default HAVE_HARD_RESET=1
##
## Build code to export a programmable irq routing table
##
default HAVE_PIRQ_TABLE=1
default IRQ_SLOT_COUNT=5
##
## Build code to export a CMOS option table
##
default HAVE_OPTION_TABLE=1
###
### LinuxBIOS layout values
###
## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
default ROM_IMAGE_SIZE = 65536
default FALLBACK_SIZE = 131072
##
## Use a small 8K stack
##
default STACK_SIZE=0x2000
##
## Use a small 16K heap
##
default HEAP_SIZE=0x4000
##
## Only use the option table in a normal image
##
#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
default USE_OPTION_TABLE = 0
default _RAMBASE = 0x00004000
default CONFIG_ROM_STREAM = 1
end