soc/intel/icelake: Create macros for FSP consumption

1. Modify PCIEXBAR to accomodate Type-C Root Port
2. LPSS device mode selection

Change-Id: Ib7e4bc304f93e4b63ac2d7f194ca441dd96dd943
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/29697
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

src/soc/intel/icelake/Kconfig

@@ -126,6 +126,10 @@ config PCR_BASE_ADDRESS
 	help
 	  This option allows you to select MMIO Base Address of sideband bus.
 
+config MMCONF_BASE_ADDRESS
+	hex
+	default 0xc0000000
+
 config CPU_BCLK_MHZ
 	int
 	default 100
@@ -146,6 +150,10 @@ config SOC_INTEL_I2C_DEV_MAX
 	int
 	default 6
 
+config SOC_INTEL_UART_DEV_MAX
+	int
+	default 3
+
 # Clock divider parameters for 115200 baud rate
 config SOC_INTEL_COMMON_LPSS_UART_CLK_M_VAL
 	hex

src/soc/intel/icelake/chip.h

@@ -152,11 +152,16 @@ struct soc_intel_icelake_config {
 	/* eMMC and SD */
 	uint8_t ScsEmmcHs400Enabled;
 	/* Need to update DLL setting to get Emmc running at HS400 speed */
-	uint8_t EmmcHs400DllNeed;
+	uint8_t EmmcUseCustomDlls;
-	/* 0-39: number of active delay for RX strobe, unit is 125 psec */
+	uint32_t EmmcTxCmdDelayRegValue;
-	uint8_t EmmcHs400RxStrobeDll1;
+	uint32_t EmmcTxDataDelay1RegValue;
-	/* 0-78: number of active delay for TX data, unit is 125 psec */
+	uint32_t EmmcTxDataDelay2RegValue;
-	uint8_t EmmcHs400TxDataDll;
+	uint32_t EmmcRxCmdDataDelay1RegValue;
+	uint32_t EmmcRxCmdDataDelay2RegValue;
+	uint32_t EmmcRxStrobeDelayRegValue;
+
+	/* Enable if SD Card Power Enable Signal is Active High */
+	uint8_t SdCardPowerEnableActiveHigh;
 
 	/* Integrated Sensor */
 	uint8_t PchIshEnable;
@@ -219,28 +224,27 @@ struct soc_intel_icelake_config {
 	} DebugConsent;
 	/*
 	 * SerialIO device mode selection:
-	 *
+	 * PchSerialIoDisabled,
-	 * Device index:
+	 * PchSerialIoPci,
-	 * PchSerialIoIndexI2C0
+	 * PchSerialIoHidden,
-	 * PchSerialIoIndexI2C1
+	 * PchSerialIoLegacyUart,
-	 * PchSerialIoIndexI2C2
+	 * PchSerialIoSkipInit
-	 * PchSerialIoIndexI2C3
-	 * PchSerialIoIndexI2C4
-	 * PchSerialIoIndexI2C5
-	 * PchSerialIoIndexSPI0
-	 * PchSerialIoIndexSPI1
-	 * PchSerialIoIndexSPI2
-	 * PchSerialIoIndexUART0
-	 * PchSerialIoIndexUART1
-	 * PchSerialIoIndexUART2
-	 *
-	 * Mode select:
-	 * PchSerialIoDisabled
-	 * PchSerialIoPci
-	 * PchSerialIoAcpi
-	 * PchSerialIoHidden
 	 */
-	uint8_t SerialIoDevMode[PchSerialIoIndexMAX];
+	uint8_t SerialIoI2cMode[CONFIG_SOC_INTEL_I2C_DEV_MAX];
+	uint8_t SerialIoGSpiMode[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX];
+	uint8_t SerialIoUartMode[CONFIG_SOC_INTEL_UART_DEV_MAX];
+	/*
+	 * GSPIn Default Chip Select Mode:
+	 * 0:Hardware Mode,
+	 * 1:Software Mode
+	 */
+	uint8_t SerialIoGSpiCsMode[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX];
+	/*
+	 * GSPIn Default Chip Select State:
+	 * 0: Low,
+	 * 1: High
+	 */
+	uint8_t SerialIoGSpiCsState[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX];
 
 	/* GPIO SD card detect pin */
 	unsigned int sdcard_cd_gpio;
@@ -251,6 +255,13 @@ struct soc_intel_icelake_config {
 	/* Intel VT configuration */
 	uint8_t VtdDisable;
 	uint8_t VmxEnable;
+
+	/* CNVi BT Audio Offload: Enable/Disable BT Audio Offload. */
+	enum {
+		PLATFORM_POR,
+		FORCE_ENABLE,
+		FORCE_DISABLE,
+	} CnviBtAudioOffload;
 };
 
 typedef struct soc_intel_icelake_config config_t;

src/soc/intel/icelake/include/soc/serialio.h

@@ -16,27 +16,33 @@
 #ifndef _SERIALIO_H_
 #define _SERIALIO_H_
 
-typedef enum {
+enum {
 	PchSerialIoDisabled,
 	PchSerialIoPci,
-	PchSerialIoAcpi,
 	PchSerialIoHidden,
-} PCH_SERIAL_IO_MODE;
+	PchSerialIoLegacyUart,
+	PchSerialIoSkipInit
+};
 
-typedef enum {
+enum {
 	PchSerialIoIndexI2C0,
 	PchSerialIoIndexI2C1,
 	PchSerialIoIndexI2C2,
 	PchSerialIoIndexI2C3,
 	PchSerialIoIndexI2C4,
-	PchSerialIoIndexI2C5,
+	PchSerialIoIndexI2C5
-	PchSerialIoIndexSPI0,
+};
-	PchSerialIoIndexSPI1,
+
-	PchSerialIoIndexSPI2,
+enum {
+	PchSerialIoIndexGSPI0,
+	PchSerialIoIndexGSPI1,
+	PchSerialIoIndexGSPI2
+};
+
+enum {
 	PchSerialIoIndexUART0,
 	PchSerialIoIndexUART1,
-	PchSerialIoIndexUART2,
+	PchSerialIoIndexUART2
-	PchSerialIoIndexMAX
+};
-} PCH_SERIAL_IO_CONTROLLER;
 
 #endif