Correct some common spelling mistakes

- occured -> occurred
- accomodate -> accommodate
- existant -> existent
- asssertion -> assertion
- manangement -> management
- cotroller -> controller

Change-Id: Ibd6663752466d691fabbdc216ea05f2b58ac12d1
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12850
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

src/arch/arm/armv7/bootblock.S

@@ -91,7 +91,7 @@ call_bootblock:
 	ldr	r0,=0x00000000
 	 /*
 	  * The current design of cpu_info places the struct at the top of the
-	  * stack. Free enough space to accomodate for that, but make sure it's
+	  * stack. Free enough space to accommodate for that, but make sure it's
 	  * 8-byte aligned for ABI compliance.
 	  */
 	sub	sp, sp, #16

src/arch/x86/exception.c

@@ -385,7 +385,7 @@ void x86_exception(struct eregs *info)
 		signo = exception_to_signal[info->vector];
 	}
 
-	/* reply to the host that an exception has occured */
+	/* reply to the host that an exception has occurred */
 	out_buffer[0] = 'S';
 	out_buffer[1] = hexchars[(signo>>4) & 0xf];
 	out_buffer[2] = hexchars[signo & 0xf];

src/device/azalia_device.c

@@ -78,7 +78,7 @@ static int codec_detect(u8 *base)
 		mdelay(1);
 		reg32 = read32(base + 0x0E);
 	} while ((reg32 != 0) && --count);
-	/* Timeout occured */
+	/* Timeout occurred */
 	if (!count)
 		goto no_codec;
 

src/include/console/post_codes.h

@@ -311,7 +311,7 @@
  * If the payload was built out-of-tree, check that it was compiled as
  * a coreboot payload
  * \n
- * Check the console output to see exactly where the failure occured.
+ * Check the console output to see exactly where the failure occurred.
  */
 #define POST_DIE 				0xff
 

src/lib/imd.c

@@ -159,7 +159,7 @@ static int imdr_create_empty(struct imdr *imdr, size_t root_size,
 		return -1;
 
 	/*
-	 * root_size needs to be large enough to accomodate root pointer and
+	 * root_size needs to be large enough to accommodate root pointer and
 	 * root book keeping structure. The caller needs to ensure there's
 	 * enough room for tracking individual allocations.
 	 */

src/mainboard/via/vt8454c/devicetree.cb

@@ -45,7 +45,7 @@ chip northbridge/via/cx700
 				end
 			end # superio
 		end # pci 11.0
-		# 1-4 non existant
+		# 1-4 non existent
 		#device pci 11.5 on end # AC97 Audio
 		#device pci 11.6 off end # AC97 Modem
 		#device pci 12.0 on end  # Ethernet

src/northbridge/amd/amdk8/thermal_mixin.asl

@@ -45,7 +45,7 @@
 OperationRegion(K8TR, PCI_Config, 0xE4, 0x4)
 Field(K8TR, DWordAcc, NoLock, Preserve) {
 	,     1,
-	THTP, 1, /* Temperature sensor trip occured */
+	THTP, 1, /* Temperature sensor trip occurred */
 	CORE, 1, /* Select Core */
 	TTS0, 1, /* Temperature sensor trip on CPU1 (or single core CPU0) */
 	TTS1, 1, /* Temperature sensor trip on CPU0 */

src/northbridge/amd/amdmct/mct/mctecc_d.c

@@ -275,7 +275,7 @@ static u32 GetScrubAddr_D(u32 Node)
 				/* Scrub Addr High again, detect 32-bit wrap */
 	val = Get_NB32(dev, reg);
 	if(val != hi) {
-		hi = val;	/* Scrub Addr Low again, if wrap occured */
+		hi = val;	/* Scrub Addr Low again, if wrap occurred */
 		lo = Get_NB32(dev, regx);
 	}
 

src/northbridge/intel/i945/raminit.c

@@ -2167,8 +2167,8 @@ static void sdram_program_clock_crossing(void)
 #if CONFIG_NORTHBRIDGE_INTEL_SUBTYPE_I945GM
 	static const u32 data_clock_crossing[] = {
 		0x00100401, 0x00000000, /* DDR400 FSB400 */
-		0xffffffff, 0xffffffff, /*  nonexistant  */
-		0xffffffff, 0xffffffff, /*  nonexistant  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
 
 		0x08040120, 0x00000000,	/* DDR400 FSB533 */
 		0x00100401, 0x00000000, /* DDR533 FSB533 */
@@ -2178,51 +2178,51 @@ static void sdram_program_clock_crossing(void)
 		0x10040280, 0x00000040, /* DDR533 FSB667 */
 		0x00100401, 0x00000000, /* DDR667 FSB667 */
 
-		0xffffffff, 0xffffffff, /*  nonexistant  */
-		0xffffffff, 0xffffffff, /*  nonexistant  */
-		0xffffffff, 0xffffffff, /*  nonexistant  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
 
-		0xffffffff, 0xffffffff, /*  nonexistant  */
-		0xffffffff, 0xffffffff, /*  nonexistant  */
-		0xffffffff, 0xffffffff, /*  nonexistant  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
 	};
 
 	static const u32 command_clock_crossing[] = {
 		0x04020208, 0x00000000, /* DDR400 FSB400 */
-		0xffffffff, 0xffffffff, /*  nonexistant  */
-		0xffffffff, 0xffffffff, /*  nonexistant  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
 
 		0x00060108, 0x00000000,	/* DDR400 FSB533 */
 		0x04020108, 0x00000000, /* DDR533 FSB533 */
-		0xffffffff, 0xffffffff, /*  nonexistant  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
 
 		0x00040318, 0x00000000,	/* DDR400 FSB667 */
 		0x04020118, 0x00000000, /* DDR533 FSB667 */
 		0x02010804, 0x00000000, /* DDR667 FSB667 */
 
-		0xffffffff, 0xffffffff, /*  nonexistant  */
-		0xffffffff, 0xffffffff, /*  nonexistant  */
-		0xffffffff, 0xffffffff, /*  nonexistant  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
 
-		0xffffffff, 0xffffffff, /*  nonexistant  */
-		0xffffffff, 0xffffffff, /*  nonexistant  */
-		0xffffffff, 0xffffffff, /*  nonexistant  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
 	};
 
 #elif CONFIG_NORTHBRIDGE_INTEL_SUBTYPE_I945GC
 	/* i945 G/P */
 	static const u32 data_clock_crossing[] = {
-		0xffffffff, 0xffffffff, /*  nonexistant  */
-		0xffffffff, 0xffffffff, /*  nonexistant  */
-		0xffffffff, 0xffffffff, /*  nonexistant  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
 
 		0x10080201, 0x00000000,	/* DDR400 FSB533 */
 		0x00100401, 0x00000000, /* DDR533 FSB533 */
 		0x00010402, 0x00000000, /* DDR667 FSB533 - fake values */
 
-		0xffffffff, 0xffffffff, /*  nonexistant  */
-		0xffffffff, 0xffffffff, /*  nonexistant  */
-		0xffffffff, 0xffffffff, /*  nonexistant  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
 
 		0x04020108, 0x00000000, /* DDR400 FSB800 */
 		0x00020108, 0x00000000, /* DDR533 FSB800 */
@@ -2234,17 +2234,17 @@ static void sdram_program_clock_crossing(void)
 	};
 
 	static const u32 command_clock_crossing[] = {
-		0xffffffff, 0xffffffff, /*  nonexistant  */
-		0xffffffff, 0xffffffff, /*  nonexistant  */
-		0xffffffff, 0xffffffff, /*  nonexistant  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
 
 		0x00010800, 0x00000402,	/* DDR400 FSB533 */
 		0x01000400, 0x00000200, /* DDR533 FSB533 */
 		0x00020904, 0x00000000, /* DDR667 FSB533 - fake values */
 
-		0xffffffff, 0xffffffff, /*  nonexistant  */
-		0xffffffff, 0xffffffff, /*  nonexistant  */
-		0xffffffff, 0xffffffff, /*  nonexistant  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
+		0xffffffff, 0xffffffff, /*  nonexistent  */
 
 		0x02010804, 0x00000000, /* DDR400 FSB800 */
 		0x00010402, 0x00000000, /* DDR533 FSB800 */

src/northbridge/intel/x4x/raminit.c

@@ -38,7 +38,7 @@ static void sdram_read_spds(struct sysinfo *s)
 	int status = 0;
 	FOR_EACH_DIMM(i) {
 		if (s->spd_map[i] == 0) {
-			/* Non-existant SPD address */
+			/* Non-existent SPD address */
 			s->dimms[i].card_type = 0;
 			continue;
 		}

src/northbridge/via/vx900/sata.c

@@ -36,7 +36,7 @@ static void vx900_print_sata_errors(u32 flags)
 	printk(BIOS_DEBUG, "\tCOMWAKE %s\n",
 	       (flags & (1 << 16)) ? "detected" : "not detected");
 	printk(BIOS_DEBUG, "\tExchange as determined by COMINIT %s\n",
-	       (flags & (1 << 26)) ? "occured" : "not occured");
+	       (flags & (1 << 26)) ? "occurred" : "not occurred");
 	printk(BIOS_DEBUG, "\tPort selector presence %s\n",
 	       (flags & (1 << 27)) ? "detected" : "not detected");
 	/* Errors */

src/soc/broadcom/cygnus/ddr_init.c

@@ -1178,7 +1178,7 @@ static int clear_ddr(uint32_t offset, uint32_t size)
 	}
 	printk(BIOS_INFO, "clear_ddr: Failed: 0x%lx\n", get_timer(start));
 	if(reg32_read((volatile uint32_t *)DDR_BistErrorOccurred))
-		printk(BIOS_ERR, "clear_ddr: Error occured\n");
+		printk(BIOS_ERR, "clear_ddr: Error occurred\n");
 	return(1);
 }
 #endif /* CONFIG_IPROC_DDR_ECC */

src/soc/intel/braswell/smihandler.c

@@ -461,7 +461,7 @@ void southbridge_smi_handler(void)
 			southbridge_smi[i]();
 		} else {
 			printk(BIOS_DEBUG,
-			       "SMI_STS[%d] occured, but no "
+			       "SMI_STS[%d] occurred, but no "
 			       "handler available.\n", i);
 		}
 	}

src/soc/intel/skylake/smihandler.c

@@ -509,7 +509,7 @@ void southbridge_smi_handler(void)
 				southbridge_smi[i]();
 			} else {
 				printk(BIOS_DEBUG,
-				    "SMI_STS[%d] occured, but no handler available.\n",
+				    "SMI_STS[%d] occurred, but no handler available.\n",
 				    i);
 			}
 		}

src/soc/nvidia/tegra124/clock.c

@@ -389,7 +389,7 @@ clock_display(u32 frequency)
 
 /* Initialize the UART and put it on CLK_M so we can use it during clock_init().
  * Will later move it to PLLP in clock_config(). The divisor must be very small
- * to accomodate 12KHz OSCs, so we override the 16.0 UART divider with the 15.1
+ * to accommodate 12KHz OSCs, so we override the 16.0 UART divider with the 15.1
  * CLK_SOURCE divider to get more precision. (This might still not be enough for
  * some OSCs... if you use 13KHz, be prepared to have a bad time.) The 1900 has
  * been determined through trial and error (must lead to div 13 at 24MHz). */

src/soc/nvidia/tegra132/clock.c

@@ -389,7 +389,7 @@ u32 clock_configure_plld(u32 frequency)
 
 /* Initialize the UART and put it on CLK_M so we can use it during clock_init().
  * Will later move it to PLLP in clock_config(). The divisor must be very small
- * to accomodate 12KHz OSCs, so we override the 16.0 UART divider with the 15.1
+ * to accommodate 12KHz OSCs, so we override the 16.0 UART divider with the 15.1
  * CLK_SOURCE divider to get more precision. (This might still not be enough for
  * some OSCs... if you use 13KHz, be prepared to have a bad time.) The 1900 has
  * been determined through trial and error (must lead to div 13 at 24MHz). */

src/southbridge/amd/pi/hudson/smihandler.c

@@ -64,7 +64,7 @@ static void process_gpe_smi(void)
 
 	/* Only Bits [23:0] indicate GEVENT SMIs. */
 	if (status & gevent_mask) {
-		/* A GEVENT SMI occured */
+		/* A GEVENT SMI occurred */
 		mainboard_smi_gpi(status & gevent_mask);
 	}
 

src/southbridge/intel/bd82x6x/smihandler.c

@@ -855,7 +855,7 @@ void southbridge_smi_handler(void)
 			if (southbridge_smi[i]) {
 				southbridge_smi[i]();
 			} else {
-				printk(BIOS_DEBUG, "SMI_STS[%d] occured, but no "
+				printk(BIOS_DEBUG, "SMI_STS[%d] occurred, but no "
 						"handler available.\n", i);
 				dump = 1;
 			}

src/southbridge/intel/fsp_bd82x6x/smihandler.c

@@ -742,7 +742,7 @@ void southbridge_smi_handler(void)
 			if (southbridge_smi[i]) {
 				southbridge_smi[i]();
 			} else {
-				printk(BIOS_DEBUG, "SMI_STS[%d] occured, but no "
+				printk(BIOS_DEBUG, "SMI_STS[%d] occurred, but no "
 						"handler available.\n", i);
 				dump = 1;
 			}

src/southbridge/intel/fsp_i89xx/smihandler.c

@@ -743,7 +743,7 @@ void southbridge_smi_handler(void)
 			if (southbridge_smi[i]) {
 				southbridge_smi[i]();
 			} else {
-				printk(BIOS_DEBUG, "SMI_STS[%d] occured, but no "
+				printk(BIOS_DEBUG, "SMI_STS[%d] occurred, but no "
 						"handler available.\n", i);
 				dump = 1;
 			}

src/southbridge/intel/i82801dx/smihandler.c

@@ -629,7 +629,7 @@ void southbridge_smi_handler(unsigned int node, smm_state_save_area_t *state_sav
 			if (southbridge_smi[i])
 				southbridge_smi[i](node, state_save);
 			else {
-				printk(BIOS_DEBUG, "SMI_STS[%d] occured, but no "
+				printk(BIOS_DEBUG, "SMI_STS[%d] occurred, but no "
 						"handler available.\n", i);
 				dump = 1;
 			}

src/southbridge/intel/i82801gx/lpc.c

@@ -42,7 +42,7 @@
 typedef struct southbridge_intel_i82801gx_config config_t;
 
 /**
- * Set miscellanous static southbridge features.
+ * Set miscellaneous static southbridge features.
  *
  * @param dev PCI device with I/O APIC control registers
  */
@@ -200,7 +200,7 @@ static void i82801gx_power_options(device_t dev)
 	}
 
 	reg8 |= (3 << 4);	/* avoid #S4 assertions */
-	reg8 &= ~(1 << 3);	/* minimum asssertion is 1 to 2 RTCCLK */
+	reg8 &= ~(1 << 3);	/* minimum assertion is 1 to 2 RTCCLK */
 
 	pci_write_config8(dev, GEN_PMCON_3, reg8);
 	printk(BIOS_INFO, "Set power %s after power failure.\n", state);

src/southbridge/intel/i82801ix/early_init.c

@@ -42,7 +42,7 @@ void i82801ix_early_init(void)
 	/* Enable upper 128bytes of CMOS. */
 	RCBA32(0x3400) = (1 << 2);
 
-	/* Initialize power manangement initialization
+	/* Initialize power management initialization
 	   register early as it affects reboot behavior. */
 	/* Bit 20 activates global reset of host and ME on cf9 writes of 0x6
 	   and 0xe (required if ME is disabled but present), bit 31 locks it.

src/southbridge/intel/i82801ix/i82801ix.h

@@ -193,7 +193,7 @@
 #define RCBA_FD			0x3418 /* Function Disable, see below. */
 #define RCBA_CG			0x341c
 #define RCBA_FDSW		0x3420
-#define RCBA_MAP		0x35f0 /* UHCI cotroller #6 remapping */
+#define RCBA_MAP		0x35f0 /* UHCI controller #6 remapping */
 
 #define BUC_LAND	(1 <<  5) /* LAN */
 #define FD_SAD2		(1 << 25) /* SATA #2 */

src/southbridge/intel/i82801ix/smihandler.c

@@ -511,7 +511,7 @@ void southbridge_smi_handler(unsigned int node, smm_state_save_area_t *state_sav
 			if (southbridge_smi[i])
 				southbridge_smi[i](node, state_save);
 			else {
-				printk(BIOS_DEBUG, "SMI_STS[%d] occured, but no "
+				printk(BIOS_DEBUG, "SMI_STS[%d] occurred, but no "
 						"handler available.\n", i);
 				dump = 1;
 			}

src/southbridge/intel/ibexpeak/smihandler.c

@@ -842,7 +842,7 @@ void southbridge_smi_handler(void)
 			if (southbridge_smi[i]) {
 				southbridge_smi[i]();
 			} else {
-				printk(BIOS_DEBUG, "SMI_STS[%d] occured, but no "
+				printk(BIOS_DEBUG, "SMI_STS[%d] occurred, but no "
 						"handler available.\n", i);
 				dump = 1;
 			}

src/southbridge/intel/lynxpoint/smihandler.c

@@ -530,7 +530,7 @@ void southbridge_smi_handler(void)
 				southbridge_smi[i]();
 			} else {
 				printk(BIOS_DEBUG,
-				       "SMI_STS[%d] occured, but no "
+				       "SMI_STS[%d] occurred, but no "
 				       "handler available.\n", i);
 			}
 		}

src/southbridge/intel/sch/audio.c

@@ -81,7 +81,7 @@ static int codec_detect(u8 *base)
 		mdelay(1);
 		reg32 = read32(base + 0x0E);
 	} while ((reg32 != 0) && --count);
-	/* Timeout occured */
+	/* Timeout occurred */
 	if (!count)
 		goto no_codec;
 

src/superio/winbond/w83627hf/acpi/superio.asl

@@ -17,7 +17,7 @@
  * include this file into a mainboard's DSDT _SB device tree and it will expose the
  * W83627HF SuperIO and its functionality.
  *
- * Devices are marked as nonexistant if they got 0x00000000 as I/O base address
+ * Devices are marked as nonexistent if they got 0x00000000 as I/O base address
  * (compatibility with legacy bios, which disables logical devices that way)
  *
  * It allows the change of IO ports, IRQs and DMA settings on most logical