mb/google/hatch: Set GPP_D9 as enable pin for Goodix Touch Screen and
increase reset off delay time Goodix touchscreen cannot work in normal mode because PP3300_TOUCHSCREEN_DX dropped. Configure GPP_D9 as enable pin in the devicetree.cb to fix the power sequence. Increase reset_off_delay time from 1ms to 3ms to met the HW requirement. BUG=b:135287161 BRANCH=None TEST=local build and measure sequence with Goodix touch screen Change-Id: I33140869990aa4715c780b0fa322921e450530ef Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33808 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
parent
c2f6c1d544
commit
3076deb391
|
@ -181,8 +181,8 @@ static const struct pad_config gpio_table[] = {
|
|||
PAD_NC(GPP_D7, NONE),
|
||||
/* D8 : WWAN_CONFIG_3 */
|
||||
PAD_NC(GPP_D8, NONE),
|
||||
/* D9 : GPP_D9 ==> NC */
|
||||
PAD_NC(GPP_D9, NONE),
|
||||
/* D9 : GPP_D9 ==> EN_PP3300_DX_TOUCHSCREEN */
|
||||
PAD_CFG_GPO(GPP_D9, 0, DEEP),
|
||||
/* D10 : GPP_D10 ==> NC */
|
||||
PAD_NC(GPP_D10, NONE),
|
||||
/* D11 : GPP_D11 ==> NC */
|
||||
|
|
|
@ -90,7 +90,9 @@ chip soc/intel/cannonlake
|
|||
register "generic.reset_gpio" =
|
||||
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)"
|
||||
register "generic.reset_delay_ms" = "10"
|
||||
register "generic.reset_off_delay_ms" = "1"
|
||||
register "generic.reset_off_delay_ms" = "3"
|
||||
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D9)"
|
||||
register "generic.enable_delay_ms" = "12"
|
||||
register "generic.has_power_resource" = "1"
|
||||
register "hid_desc_reg_offset" = "0x01"
|
||||
device i2c 5d on end
|
||||
|
|
|
@ -81,7 +81,9 @@ chip soc/intel/cannonlake
|
|||
register "generic.reset_gpio" =
|
||||
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)"
|
||||
register "generic.reset_delay_ms" = "10"
|
||||
register "generic.reset_off_delay_ms" = "1"
|
||||
register "generic.reset_off_delay_ms" = "3"
|
||||
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D9)"
|
||||
register "generic.enable_delay_ms" = "12"
|
||||
register "generic.has_power_resource" = "1"
|
||||
register "hid_desc_reg_offset" = "0x01"
|
||||
device i2c 5d on end
|
||||
|
|
Loading…
Reference in New Issue