soc/intel/cannonlake: Implement pmc_soc_restore_power_failure as per EDS
TEST=CNL_RVP is able to power on after reconnecting power supply. Change-Id: I41e655fe79d958cce9e627ea2f2380185364ab19 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22840 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
parent
c1d99c9962
commit
33cd28e7ac
|
@ -25,6 +25,41 @@
|
|||
#include <soc/pci_devs.h>
|
||||
#include <soc/pm.h>
|
||||
|
||||
/*
|
||||
* Set which power state system will be after reapplying
|
||||
* the power (from G3 State)
|
||||
*/
|
||||
static void pmc_set_afterg3(struct device *dev, int s5pwr)
|
||||
{
|
||||
uint8_t reg8;
|
||||
|
||||
reg8 = pci_read_config8(dev, GEN_PMCON_B);
|
||||
|
||||
switch (s5pwr) {
|
||||
case MAINBOARD_POWER_STATE_OFF:
|
||||
reg8 |= 1;
|
||||
break;
|
||||
case MAINBOARD_POWER_STATE_ON:
|
||||
reg8 &= ~1;
|
||||
break;
|
||||
case MAINBOARD_POWER_STATE_PREVIOUS:
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
pci_write_config8(dev, GEN_PMCON_B, reg8);
|
||||
}
|
||||
|
||||
/*
|
||||
* Set PMC register to know which state system should be after
|
||||
* power reapplied
|
||||
*/
|
||||
void pmc_soc_restore_power_failure(void)
|
||||
{
|
||||
pmc_set_afterg3(PCH_DEV_PMC,
|
||||
pmc_get_mainboard_power_failure_state_choice());
|
||||
}
|
||||
|
||||
static void config_deep_sX(uint32_t offset, uint32_t mask, int sx, int enable)
|
||||
{
|
||||
uint32_t reg;
|
||||
|
@ -66,6 +101,39 @@ static void config_deep_sx(uint32_t deepsx_config)
|
|||
write32(pmcbase + DSX_CFG, reg);
|
||||
}
|
||||
|
||||
static void pch_power_options(struct device *dev)
|
||||
{
|
||||
const char *state;
|
||||
|
||||
/* Get the chip configuration */
|
||||
int pwr_on = pmc_get_mainboard_power_failure_state_choice();
|
||||
|
||||
/*
|
||||
* Which state do we want to goto after g3 (power restored)?
|
||||
* 0 == S5 Soft Off
|
||||
* 1 == S0 Full On
|
||||
* 2 == Keep Previous State
|
||||
*/
|
||||
switch (pwr_on) {
|
||||
case MAINBOARD_POWER_STATE_OFF:
|
||||
state = "off";
|
||||
break;
|
||||
case MAINBOARD_POWER_STATE_ON:
|
||||
state = "on";
|
||||
break;
|
||||
case MAINBOARD_POWER_STATE_PREVIOUS:
|
||||
state = "state keep";
|
||||
break;
|
||||
default:
|
||||
state = "undefined";
|
||||
}
|
||||
pmc_set_afterg3(dev, pwr_on);
|
||||
printk(BIOS_INFO, "Set power %s after power failure.\n", state);
|
||||
|
||||
/* Set up GPE configuration. */
|
||||
pmc_gpe_init();
|
||||
}
|
||||
|
||||
static void pmc_init(void *unused)
|
||||
{
|
||||
device_t dev = PCH_DEV_PMC;
|
||||
|
@ -74,7 +142,7 @@ static void pmc_init(void *unused)
|
|||
rtc_init();
|
||||
|
||||
/* Initialize power management */
|
||||
pmc_gpe_init();
|
||||
pch_power_options(dev);
|
||||
|
||||
pmc_set_acpi_mode();
|
||||
|
||||
|
|
Loading…
Reference in New Issue