mainboard/asus/kgpe-d16: Use W83667HG-A SuperIO instead of NCT5572D

Change-Id: If67999098fbe2831eeb30cb8b362c558db5d2688
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13157
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This commit is contained in:
Timothy Pearson 2015-11-24 14:11:57 -06:00 committed by Martin Roth
parent 68e3f6dd37
commit 3679d7f909
3 changed files with 30 additions and 22 deletions

View File

@ -12,7 +12,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select SOUTHBRIDGE_AMD_SB700
select SOUTHBRIDGE_AMD_SB700_DISABLE_ISA_DMA
select SOUTHBRIDGE_AMD_SUBTYPE_SP5100
select SUPERIO_NUVOTON_NCT5572D
select SUPERIO_WINBOND_W83667HG_A
select PARALLEL_CPU_INIT
select HAVE_ROMSTAGE_CONSOLE_SPINLOCK
select HAVE_ROMSTAGE_NVRAM_CBFS_SPINLOCK

View File

@ -177,33 +177,41 @@ chip northbridge/amd/amdfam10/root_complex # Root complex
device pci 14.1 on end # IDE 0x439c
device pci 14.2 on end # HDA 0x4383 (ASUS MIO add-on card)
device pci 14.3 on # LPC 0x439d (SMBUS primary controller)
chip superio/nuvoton/nct5572d # Super I/O
chip superio/winbond/w83667hg-a # Super I/O
device pnp 2e.0 off end # FDC; Not available on the KGPE-D16
device pnp 2e.1 off end # LPT1; Not available on the KGPE-D16
device pnp 2e.2 on # Com1
device pnp 2e.2 on # COM1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 2e.3 off end # IR: Not available on the KGPE-D16
device pnp 2e.3 on # COM2
io 0x60 = 0x2f8
irq 0x70 = 3
end
device pnp 2e.5 on # PS/2 keyboard & mouse
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1
irq 0x72 = 12
end
device pnp 2e.6 off end # CIR: Not available on the KGPE-D16
device pnp 2e.7 off end # GIPO689
device pnp 2e.106 off end # SPI: Not available on the KGPE-D16
device pnp 2e.107 off end # GIPO6
device pnp 2e.207 off end # GIPO7
device pnp 2e.307 off end # GIPO8
device pnp 2e.407 off end # GIPO9
device pnp 2e.8 off end # WDT
device pnp 2e.9 off end # GPIO235
device pnp 2e.108 off end # GPIO 1
device pnp 2e.9 off end # GPIO2
device pnp 2e.109 off end # GPIO3
device pnp 2e.209 off end # GPIO4
device pnp 2e.309 off end # GPIO5
device pnp 2e.a on end # ACPI
device pnp 2e.b on # HW Monitor
io 0x60 = 0x290
io 0x62 = 0x0000 # SB-TSI currently not implemented
irq 0x70 = 5
end
device pnp 2e.c off end # PECI
device pnp 2e.d off end # SUSLED
device pnp 2e.e off end # CIRWKUP
device pnp 2e.d off end # VID_BUSSEL
device pnp 2e.f off end # GPIO_PP_OD
end
end

View File

@ -35,8 +35,8 @@
#include <delay.h>
#include <cpu/x86/lapic.h>
#include "northbridge/amd/amdfam10/reset_test.c"
#include <superio/nuvoton/common/nuvoton.h>
#include <superio/nuvoton/nct5572d/nct5572d.h>
#include <superio/winbond/common/winbond.h>
#include <superio/winbond/w83667hg-a/w83667hg-a.h>
#include <cpu/x86/bist.h>
#include <smp/spinlock.h>
// #include "northbridge/amd/amdk8/incoherent_ht.c"
@ -46,7 +46,7 @@
#include "northbridge/amd/amdfam10/debug.c"
#include "northbridge/amd/amdfam10/setup_resource_map.c"
#define SERIAL_DEV PNP_DEV(0x2e, NCT5572D_SP1)
#define SERIAL_DEV PNP_DEV(0x2e, W83667HG_A_SP1)
static void activate_spd_rom(const struct mem_controller *ctrl);
@ -393,7 +393,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
sb7xx_51xx_pci_port80();
/* Initialize early serial */
nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
console_init();
/* Disable LPC legacy DMA support to prevent lockup */