GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

nb/x4x/raminit: Rewrite SPD decode and timing selection 

This is mostly written from scratch and uses common spd ddr2 decode
functions.

This improves the following:
* This fixes incorrect CAS/Freq detection on DDR2;

* Fixes tRFC computation; tRFC == 78 is a valid timing which is
  excluded and 0 ends up being used; (TESTED)

* Timings selection does not use loops;

* Removes ddr3 spd decode and is re-added in follow-up patches using
  common ddr3 spd functions;

* Raminit would bail out if a dimm was unsupported, now in some cases it
  just marks the dimm slot as empty;

* It dramatically reduces stack usage since it does not allocate 4
  times 256 bytes to store full SPDs, amongs other unused things that
  were stored in sysinfo;

* Reports when no dimms are present;

* Uses i2c block read to read SPD which is about 5 times faster than
  bytewise read, with a fallback to smbus mode in case of failure,
  which does seem to happen when the system is forcefully powered
  off.

Change-Id: I760eeaa3bd4f2bc25a517ddb1b9533c971454071
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This commit is contained in:
Arthur Heymans 2017-04-05 16:17:26 +02:00
parent cb0c40d350
commit 3cf94032bc
3 changed files with 268 additions and 359 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

480
src/northbridge/intel/x4x/raminit.c
View File

@ -32,150 +32,71 @@
#include <pc80/mc146818rtc.h>
#include <spd.h>
#include <string.h>
#include <device/dram/ddr2.h>
static inline int spd_read_byte(unsigned int device, unsigned int address)
{
return smbus_read_byte(device, address);
}
static void sdram_read_spds(struct sysinfo *s)
struct abs_timings {
u32 min_tclk;
u32 min_tRAS;
u32 min_tRP;
u32 min_tRCD;
u32 min_tWR;
u32 min_tRFC;
u32 min_tWTR;
u32 min_tRRD;
u32 min_tRTP;
u32 min_tCLK_cas[8];
u32 cas_supported;
};
#define CTRL_MIN_TCLK_DDR2 TCK_400MHZ
static void select_cas_dramfreq_ddr2(struct sysinfo *s,
const struct abs_timings *saved_timings)
{
u8 i, j, chan;
int status = 0;
FOR_EACH_DIMM(i) {
if (s->spd_map[i] == 0) {
/* Non-existent SPD address */
s->dimms[i].card_type = RAW_CARD_UNPOPULATED;
continue;
u8 try_cas;
/* Currently only these CAS are supported */
u8 cas_mask = SPD_CAS_LATENCY_DDR2_5 | SPD_CAS_LATENCY_DDR2_6;
cas_mask &= saved_timings->cas_supported;
try_cas = spd_get_msbs(cas_mask);
while (cas_mask & (1 << try_cas) && try_cas > 0) {
s->selected_timings.CAS = try_cas;
s->selected_timings.tclk = saved_timings->min_tCLK_cas[try_cas];
if (s->selected_timings.tclk >= CTRL_MIN_TCLK_DDR2 &&
saved_timings->min_tCLK_cas[try_cas] !=
saved_timings->min_tCLK_cas[try_cas - 1])
break;
try_cas--;
}
for (j = 0; j < 64; j++) {
status = spd_read_byte(s->spd_map[i], j);
if (status < 0) {
/* No SPD here */
s->dimms[i].card_type = RAW_CARD_UNPOPULATED;
if ((s->selected_timings.CAS < 3) || (s->selected_timings.tclk == 0))
die("Could not find common memory frequency and CAS\n");
switch (s->selected_timings.tclk) {
case TCK_200MHZ:
case TCK_266MHZ:
/* FIXME: this works on vendor BIOS */
die("Selected dram frequency not supported\n");
case TCK_333MHZ:
s->selected_timings.mem_clk = MEM_CLOCK_667MHz;
break;
case TCK_400MHZ:
s->selected_timings.mem_clk = MEM_CLOCK_800MHz;
break;
}
s->dimms[i].spd_data[j] = (u8) status;
if (j == 62)
s->dimms[i].card_type = ((u8) status) & 0x1f;
}
if (status >= 0) {
if (IS_ENABLED(CONFIG_DEBUG_RAM_SETUP))
hexdump(s->dimms[i].spd_data, 64);
}
}
s->spd_type = 0;
int fail = 1;
FOR_EACH_POPULATED_DIMM(s->dimms, i) {
switch ((enum ddrxspd) s->dimms[i].spd_data[2]) {
case DDR2SPD:
if (s->spd_type == 0)
s->spd_type = DDR2;
else if (s->spd_type == DDR3)
die("DIMM type mismatch\n");
break;
case DDR3SPD:
default:
if (s->spd_type == 0)
s->spd_type = DDR3;
else if (s->spd_type == DDR2)
die("DIMM type mismatch\n");
break;
}
}
if (s->spd_type == DDR3) {
FOR_EACH_POPULATED_DIMM(s->dimms, i) {
s->dimms[i].sides = (s->dimms[i].spd_data[5] & 0x0f) + 1;
s->dimms[i].ranks = ((s->dimms[i].spd_data[7] >> 3) & 0x7) + 1;
s->dimms[i].chip_capacity = (s->dimms[i].spd_data[4] & 0xf);
s->dimms[i].banks = 8;
s->dimms[i].rows = ((s->dimms[i].spd_data[5] >> 3) & 0x7) + 12;
s->dimms[i].cols = (s->dimms[i].spd_data[5] & 0x7) + 9;
s->dimms[i].cas_latencies = 0xfe;
s->dimms[i].cas_latencies &= (s->dimms[i].spd_data[14] << 1);
if (s->dimms[i].cas_latencies == 0)
s->dimms[i].cas_latencies = 0x40;
s->dimms[i].tAAmin = s->dimms[i].spd_data[16];
s->dimms[i].tCKmin = s->dimms[i].spd_data[12];
s->dimms[i].width = s->dimms[i].spd_data[7] & 0x7;
s->dimms[i].page_size = s->dimms[i].width * (1 << s->dimms[i].cols); // Bytes
s->dimms[i].tRAS = ((s->dimms[i].spd_data[21] & 0xf) << 8) |
s->dimms[i].spd_data[22];
s->dimms[i].tRP = s->dimms[i].spd_data[20];
s->dimms[i].tRCD = s->dimms[i].spd_data[18];
s->dimms[i].tWR = s->dimms[i].spd_data[17];
fail = 0;
}
} else if (s->spd_type == DDR2) {
FOR_EACH_POPULATED_DIMM(s->dimms, i) {
s->dimms[i].sides = (s->dimms[i].spd_data[5] & 0x7) + 1;
s->dimms[i].banks = (s->dimms[i].spd_data[17] >> 2) - 1;
s->dimms[i].chip_capacity = s->dimms[i].banks;
s->dimms[i].rows = s->dimms[i].spd_data[3];// - 12;
s->dimms[i].cols = s->dimms[i].spd_data[4];// - 9;
s->dimms[i].cas_latencies = s->dimms[i].spd_data[18];
if (s->dimms[i].cas_latencies == 0)
s->dimms[i].cas_latencies = 0x60; // 6,5 CL
s->dimms[i].tAAmin = s->dimms[i].spd_data[26];
s->dimms[i].tCKmin = s->dimms[i].spd_data[25];
s->dimms[i].width = (s->dimms[i].spd_data[13] >> 3) - 1;
s->dimms[i].page_size = (s->dimms[i].width+1) * (1 << s->dimms[i].cols); // Bytes
s->dimms[i].tRAS = s->dimms[i].spd_data[30];
s->dimms[i].tRP = s->dimms[i].spd_data[27];
s->dimms[i].tRCD = s->dimms[i].spd_data[29];
s->dimms[i].tWR = s->dimms[i].spd_data[36];
s->dimms[i].ranks = s->dimms[i].sides; // XXX
printk(BIOS_DEBUG, "DIMM %d\n", i);
printk(BIOS_DEBUG, " Sides : %d\n", s->dimms[i].sides);
printk(BIOS_DEBUG, " Banks : %d\n", s->dimms[i].banks);
printk(BIOS_DEBUG, " Ranks : %d\n", s->dimms[i].ranks);
printk(BIOS_DEBUG, " Rows : %d\n", s->dimms[i].rows);
printk(BIOS_DEBUG, " Cols : %d\n", s->dimms[i].cols);
printk(BIOS_DEBUG, " Page size : %d\n", s->dimms[i].page_size);
printk(BIOS_DEBUG, " Width : %d\n", (s->dimms[i].width+1)*8);
fail = 0;
}
}
if (fail)
die("No memory dimms, halt\n");
FOR_EACH_POPULATED_CHANNEL(s->dimms, chan) {
FOR_EACH_POPULATED_DIMM_IN_CHANNEL(s->dimms, chan, i) {
int dimm_config;
if (s->dimms[i].ranks == 1) {
if (s->dimms[i].width == 0) /* x8 */
dimm_config = 1;
else /* x16 */
dimm_config = 3;
} else {
if (s->dimms[i].width == 0) /* x8 */
dimm_config = 2;
else
die("Dual-rank x16 not supported\n");
}
s->dimm_config[chan] |=
dimm_config << (i % DIMMS_PER_CHANNEL) * 2;
}
printk(BIOS_DEBUG, " Config[CH%d] : %d\n", chan, s->dimm_config[chan]);
}
}
static u8 msbpos(u8 val) //Reverse
{
u8 i;
for (i = 7; (i >= 0) && ((val & (1 << i)) == 0); i--)
;
return i;
}
static void mchinfo_ddr2(struct sysinfo *s)
{
const u32 eax = cpuid_ext(0x04, 0).eax;
s->cores = ((eax >> 26) & 0x3f) + 1;
printk(BIOS_WARNING, "%d CPU cores\n", s->cores);
printk(BIOS_WARNING, "%d CPU cores\n", ((eax >> 26) & 0x3f) + 1);
u32 capid = pci_read_config16(PCI_DEV(0, 0, 0), 0xe8);
if (!(capid & (1<<(79-64))))
@ -195,21 +116,126 @@ static void mchinfo_ddr2(struct sysinfo *s)
printk(BIOS_WARNING, "VT-d enabled\n");
}
static void sdram_detect_ram_speed(struct sysinfo *s)
static int ddr2_save_dimminfo(u8 dimm_idx, u8 *raw_spd,
struct abs_timings *saved_timings, struct sysinfo *s)
{
u8 i;
u8 commoncas = 0;
u8 currcas;
u8 currfreq;
u8 maxfreq;
u8 freq = 0;
struct dimm_attr_st decoded_dimm;
int i;
// spdidx,cycletime @CAS 5 6
u8 idx800[7][2] = {{0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {23, 0x30},
{9, 0x25} };
int found = 0;
if (spd_decode_ddr2(&decoded_dimm, raw_spd) != SPD_STATUS_OK) {
printk(BIOS_DEBUG, "Problems decoding SPD\n");
return CB_ERR;
}
// Find max FSB speed
if (IS_ENABLED(CONFIG_DEBUG_RAM_SETUP))
dram_print_spd_ddr2(&decoded_dimm);
if (!(decoded_dimm.width & (0x08 | 0x10))) {
printk(BIOS_ERR,
"DIMM%d Unsupported width: x%d. Disabling dimm\n",
dimm_idx, s->dimms[dimm_idx].width);
return CB_ERR;
}
s->dimms[dimm_idx].width = (decoded_dimm.width >> 3) - 1;
/*
* This boils down to:
* "Except for the x16 configuration, all DDR2 devices have a
* 1KB page size. For the x16 configuration, the page size is 2KB
* for all densities except the 256Mb device, which has a 1KB page
* size." Micron, 'TN-47-16 Designing for High-Density DDR2 Memory'
*/
s->dimms[dimm_idx].page_size = s->dimms[dimm_idx].width *
(1 << decoded_dimm.col_bits);
switch (decoded_dimm.banks) {
case 4:
s->dimms[dimm_idx].n_banks = N_BANKS_4;
break;
case 8:
s->dimms[dimm_idx].n_banks = N_BANKS_8;
break;
default:
printk(BIOS_ERR,
"DIMM%d Unsupported #banks: x%d. Disabling dimm\n",
dimm_idx, decoded_dimm.banks);
return CB_ERR;
}
s->dimms[dimm_idx].ranks = decoded_dimm.ranks;
s->dimms[dimm_idx].rows = decoded_dimm.row_bits;
s->dimms[dimm_idx].cols = decoded_dimm.col_bits;
saved_timings->cas_supported &= decoded_dimm.cas_supported;
saved_timings->min_tRAS =
MAX(saved_timings->min_tRAS, decoded_dimm.tRAS);
saved_timings->min_tRP =
MAX(saved_timings->min_tRP, decoded_dimm.tRP);
saved_timings->min_tRCD =
MAX(saved_timings->min_tRCD, decoded_dimm.tRCD);
saved_timings->min_tWR =
MAX(saved_timings->min_tWR, decoded_dimm.tWR);
saved_timings->min_tRFC =
MAX(saved_timings->min_tRFC, decoded_dimm.tRFC);
saved_timings->min_tWTR =
MAX(saved_timings->min_tWTR, decoded_dimm.tWTR);
saved_timings->min_tRRD =
MAX(saved_timings->min_tRRD, decoded_dimm.tRRD);
saved_timings->min_tRTP =
MAX(saved_timings->min_tRTP, decoded_dimm.tRTP);
for (i = 0; i < 8; i++) {
if (!(saved_timings->cas_supported & (1 << i)))
saved_timings->min_tCLK_cas[i] = 0;
else
saved_timings->min_tCLK_cas[i] =
MAX(saved_timings->min_tCLK_cas[i],
decoded_dimm.cycle_time[i]);
}
return CB_SUCCESS;
}
static void select_discrete_timings(struct sysinfo *s,
const struct abs_timings *timings)
{
s->selected_timings.tRAS = DIV_ROUND_UP(timings->min_tRAS,
s->selected_timings.tclk);
s->selected_timings.tRP = DIV_ROUND_UP(timings->min_tRP,
s->selected_timings.tclk);
s->selected_timings.tRCD = DIV_ROUND_UP(timings->min_tRCD,
s->selected_timings.tclk);
s->selected_timings.tWR = DIV_ROUND_UP(timings->min_tWR,
s->selected_timings.tclk);
s->selected_timings.tRFC = DIV_ROUND_UP(timings->min_tRFC,
s->selected_timings.tclk);
s->selected_timings.tWTR = DIV_ROUND_UP(timings->min_tWTR,
s->selected_timings.tclk);
s->selected_timings.tRRD = DIV_ROUND_UP(timings->min_tRRD,
s->selected_timings.tclk);
s->selected_timings.tRTP = DIV_ROUND_UP(timings->min_tRTP,
s->selected_timings.tclk);
}
static void print_selected_timings(struct sysinfo *s)
{
printk(BIOS_DEBUG, "Selected timings:\n");
printk(BIOS_DEBUG, "\tFSB: %dMHz\n",
fsb2mhz(s->selected_timings.fsb_clk));
printk(BIOS_DEBUG, "\tDDR: %dMHz\n",
ddr2mhz(s->selected_timings.mem_clk));
printk(BIOS_DEBUG, "\tCAS: %d\n", s->selected_timings.CAS);
printk(BIOS_DEBUG, "\ttRAS: %d\n", s->selected_timings.tRAS);
printk(BIOS_DEBUG, "\ttRP: %d\n", s->selected_timings.tRP);
printk(BIOS_DEBUG, "\ttRCD: %d\n", s->selected_timings.tRCD);
printk(BIOS_DEBUG, "\ttWR: %d\n", s->selected_timings.tWR);
printk(BIOS_DEBUG, "\ttRFC: %d\n", s->selected_timings.tRFC);
printk(BIOS_DEBUG, "\ttWTR: %d\n", s->selected_timings.tWTR);
printk(BIOS_DEBUG, "\ttRRD: %d\n", s->selected_timings.tRRD);
printk(BIOS_DEBUG, "\ttRTP: %d\n", s->selected_timings.tRTP);
}
static void find_fsb_speed(struct sysinfo *s)
{
switch (MCHBAR32(0xc00) & 0x7) {
case 0x0:
s->max_fsb = FSB_CLOCK_1066MHz;
@ -225,88 +251,98 @@ static void sdram_detect_ram_speed(struct sysinfo *s)
printk(BIOS_WARNING, "Can't detect FSB, setting 800MHz\n");
break;
}
s->selected_timings.fsb_clk = s->max_fsb;
}
// Max RAM speed
if (s->spd_type == DDR2) {
static void decode_spd_select_timings(struct sysinfo *s)
{
unsigned int device;
u8 dram_type_mask = (1 << DDR2) | (1 << DDR3);
u8 dimm_mask = 0;
u8 raw_spd[256];
int i, j;
struct abs_timings saved_timings;
memset(&saved_timings, 0, sizeof(saved_timings));
saved_timings.cas_supported = UINT32_MAX;
maxfreq = MEM_CLOCK_800MHz;
// Choose common CAS latency from {6,5}, 4 does not work
commoncas = 0x60;
FOR_EACH_POPULATED_DIMM(s->dimms, i) {
commoncas &= s->dimms[i].cas_latencies;
FOR_EACH_DIMM(i) {
s->dimms[i].card_type = RAW_CARD_POPULATED;
device = s->spd_map[i];
if (!device) {
s->dimms[i].card_type = RAW_CARD_UNPOPULATED;
continue;
}
if (commoncas == 0)
die("No common CAS among dimms\n");
// Working from fastest to slowest,
// fast->slow 5@800 6@800 5@667
found = 0;
for (currcas = 5; currcas <= msbpos(commoncas); currcas++) {
currfreq = maxfreq;
if (currfreq == MEM_CLOCK_800MHz) {
found = 1;
FOR_EACH_POPULATED_DIMM(s->dimms, i) {
if (s->dimms[i].spd_data[idx800[currcas][0]] > idx800[currcas][1]) {
// this is too fast
found = 0;
}
}
if (found)
switch (spd_read_byte(s->spd_map[i], SPD_MEMORY_TYPE)) {
case DDR2SPD:
dram_type_mask &= 1 << DDR2;
s->spd_type = DDR2;
break;
}
}
if (!found) {
currcas = 5;
currfreq = MEM_CLOCK_667MHz;
found = 1;
FOR_EACH_POPULATED_DIMM(s->dimms, i) {
if (s->dimms[i].spd_data[9] > 0x30) {
// this is too fast
found = 0;
}
}
}
if (!found)
die("No valid CAS/frequencies detected\n");
s->selected_timings.mem_clk = currfreq;
s->selected_timings.CAS = currcas;
} else { // DDR3
// Limit frequency for MCH
maxfreq = (s->max_ddr2_mhz == 800) ? MEM_CLOCK_800MHz : MEM_CLOCK_667MHz;
maxfreq >>= 3;
freq = MEM_CLOCK_1333MHz;
if (maxfreq)
freq = maxfreq + 2;
if (freq > MEM_CLOCK_1333MHz)
freq = MEM_CLOCK_1333MHz;
// Limit DDR speed to FSB speed
switch (s->max_fsb) {
case FSB_CLOCK_800MHz:
if (freq > MEM_CLOCK_800MHz)
freq = MEM_CLOCK_800MHz;
break;
case FSB_CLOCK_1066MHz:
if (freq > MEM_CLOCK_1066MHz)
freq = MEM_CLOCK_1066MHz;
break;
case FSB_CLOCK_1333MHz:
if (freq > MEM_CLOCK_1333MHz)
freq = MEM_CLOCK_1333MHz;
case DDR3SPD:
dram_type_mask &= 1 << DDR3;
s->spd_type = DDR3;
break;
default:
die("Invalid FSB\n");
break;
s->dimms[i].card_type = RAW_CARD_UNPOPULATED;
continue;
}
if (!dram_type_mask)
die("Mixing up dimm types is not supported!\n");
printk(BIOS_DEBUG, "Decoding dimm %d\n", i);
if (s->spd_type == DDR2){
printk(BIOS_DEBUG,
"Reading SPD using i2c block operation.\n");
if (i2c_block_read(device, 0, 64, raw_spd) != 64) {
printk(BIOS_DEBUG, "i2c block operation failed,"
" trying smbus byte operation.\n");
for (j = 0; j < 64; j++)
raw_spd[j] = spd_read_byte(device, j);
}
if (ddr2_save_dimminfo(i, raw_spd, &saved_timings, s)) {
printk(BIOS_WARNING,
"Encountered problems with SPD, "
"skipping this DIMM.\n");
s->dimms[i].card_type = RAW_CARD_UNPOPULATED;
continue;
}
} else { /* DDR3: not implemented so don't decode */
die("DDR3 support is not implemented\n");
}
dimm_mask |= (1 << i);
}
if (!dimm_mask)
die("No memory installed.\n");
if (s->spd_type == DDR2)
select_cas_dramfreq_ddr2(s, &saved_timings);
select_discrete_timings(s, &saved_timings);
}
static void find_dimm_config(struct sysinfo *s)
{
int chan, i;
FOR_EACH_POPULATED_CHANNEL(s->dimms, chan) {
FOR_EACH_POPULATED_DIMM_IN_CHANNEL(s->dimms, chan, i) {
int dimm_config;
if (s->dimms[i].ranks == 1) {
if (s->dimms[i].width == 0) /* x8 */
dimm_config = 1;
else /* x16 */
dimm_config = 3;
} else {
if (s->dimms[i].width == 0) /* x8 */
dimm_config = 2;
else
die("Dual-rank x16 not supported\n");
}
s->dimm_config[chan] |=
dimm_config << (i % DIMMS_PER_CHANNEL) * 2;
}
printk(BIOS_DEBUG, " Config[CH%d] : %d\n", chan,
s->dimm_config[chan]);
}
// TODO: CAS detection for DDR3
}
}
static void checkreset_ddr2(int boot_path)
@ -367,19 +403,15 @@ void sdram_initialize(int boot_path, const u8 *spd_map)
checkreset_ddr2(s.boot_path);
/* Detect dimms per channel */
s.dimms_per_ch = 2;
reg8 = pci_read_config8(PCI_DEV(0, 0, 0), 0xe9);
if (reg8 & 0x10)
s.dimms_per_ch = 1;
printk(BIOS_DEBUG, "Dimms per channel: %d\n", s.dimms_per_ch);
printk(BIOS_DEBUG, "Dimms per channel: %d\n", (reg8 & 0x10) ? 1 : 2);
mchinfo_ddr2(&s);
sdram_read_spds(&s);
/* Choose Common Frequency */
sdram_detect_ram_speed(&s);
find_fsb_speed(&s);
decode_spd_select_timings(&s);
print_selected_timings(&s);
find_dimm_config(&s);
switch (s.spd_type) {
case DDR2:

124
src/northbridge/intel/x4x/raminit_ddr2.c
View File

@ -31,12 +31,12 @@
#define ME_UMA_SIZEMB 0
static u32 fsb2mhz(u32 speed)
u32 fsb2mhz(u32 speed)
{
return (speed * 267) + 800;
}
static u32 ddr2mhz(u32 speed)
u32 ddr2mhz(u32 speed)
{
static const u16 mhz[] = { 0, 0, 667, 800, 1067, 1333 };
@ -64,113 +64,6 @@ static u8 msbpos(u32 val)
return (u8)(pos & 0xff);
}
static void sdram_detect_smallest_params2(struct sysinfo *s)
{
u16 mult[6] = {
5000, // 400
3750, // 533
3000, // 667
2500, // 800
1875, // 1066
1500, // 1333
};
u8 i;
u32 tmp;
u32 maxtras = 0;
u32 maxtrp = 0;
u32 maxtrcd = 0;
u32 maxtwr = 0;
u32 maxtrfc = 0;
u32 maxtwtr = 0;
u32 maxtrrd = 0;
u32 maxtrtp = 0;
FOR_EACH_POPULATED_DIMM(s->dimms, i) {
maxtras = MAX(maxtras, s->dimms[i].spd_data[30] * 1000);
maxtrp = MAX(maxtrp, (s->dimms[i].spd_data[27] * 1000) >> 2);
maxtrcd = MAX(maxtrcd, (s->dimms[i].spd_data[29] * 1000) >> 2);
maxtwr = MAX(maxtwr, (s->dimms[i].spd_data[36] * 1000) >> 2);
maxtrfc = MAX(maxtrfc, s->dimms[i].spd_data[42] * 1000 +
(s->dimms[i].spd_data[40] & 0xf));
maxtwtr = MAX(maxtwtr, (s->dimms[i].spd_data[37] * 1000) >> 2);
maxtrrd = MAX(maxtrrd, (s->dimms[i].spd_data[28] * 1000) >> 2);
maxtrtp = MAX(maxtrtp, (s->dimms[i].spd_data[38] * 1000) >> 2);
}
for (i = 9; i < 24; i++) {
tmp = mult[s->selected_timings.mem_clk] * i;
if (tmp >= maxtras) {
s->selected_timings.tRAS = i;
break;
}
}
for (i = 3; i < 10; i++) {
tmp = mult[s->selected_timings.mem_clk] * i;
if (tmp >= maxtrp) {
s->selected_timings.tRP = i;
break;
}
}
for (i = 3; i < 10; i++) {
tmp = mult[s->selected_timings.mem_clk] * i;
if (tmp >= maxtrcd) {
s->selected_timings.tRCD = i;
break;
}
}
for (i = 3; i < 15; i++) {
tmp = mult[s->selected_timings.mem_clk] * i;
if (tmp >= maxtwr) {
s->selected_timings.tWR = i;
break;
}
}
for (i = 15; i < 78; i++) {
tmp = mult[s->selected_timings.mem_clk] * i;
if (tmp >= maxtrfc) {
s->selected_timings.tRFC = ((i + 16) & 0xfe) - 15;
break;
}
}
for (i = 4; i < 15; i++) {
tmp = mult[s->selected_timings.mem_clk] * i;
if (tmp >= maxtwtr) {
s->selected_timings.tWTR = i;
break;
}
}
for (i = 2; i < 15; i++) {
tmp = mult[s->selected_timings.mem_clk] * i;
if (tmp >= maxtrrd) {
s->selected_timings.tRRD = i;
break;
}
}
for (i = 4; i < 15; i++) {
tmp = mult[s->selected_timings.mem_clk] * i;
if (tmp >= maxtrtp) {
s->selected_timings.tRTP = i;
break;
}
}
s->selected_timings.fsb_clk = s->max_fsb;
printk(BIOS_DEBUG, "Selected timings:\n");
printk(BIOS_DEBUG, "\tFSB: %dMHz\n", fsb2mhz(s->selected_timings.fsb_clk));
printk(BIOS_DEBUG, "\tDDR: %dMHz\n", ddr2mhz(s->selected_timings.mem_clk));
printk(BIOS_DEBUG, "\tCAS: %d\n", s->selected_timings.CAS);
printk(BIOS_DEBUG, "\ttRAS: %d\n", s->selected_timings.tRAS);
printk(BIOS_DEBUG, "\ttRP: %d\n", s->selected_timings.tRP);
printk(BIOS_DEBUG, "\ttRCD: %d\n", s->selected_timings.tRCD);
printk(BIOS_DEBUG, "\ttWR: %d\n", s->selected_timings.tWR);
printk(BIOS_DEBUG, "\ttRFC: %d\n", s->selected_timings.tRFC);
printk(BIOS_DEBUG, "\ttWTR: %d\n", s->selected_timings.tWTR);
printk(BIOS_DEBUG, "\ttRRD: %d\n", s->selected_timings.tRRD);
printk(BIOS_DEBUG, "\ttRTP: %d\n", s->selected_timings.tRTP);
}
static void clkcross_ddr2(struct sysinfo *s)
{
u8 i, j;
@ -500,8 +393,7 @@ static void timings_ddr2(struct sysinfo *s)
twl = s->selected_timings.CAS - 1;
FOR_EACH_POPULATED_DIMM(s->dimms, i) {
if (s->dimms[i].banks == 1) {
/* 8 banks */
if (s->dimms[i].n_banks == N_BANKS_8) {
trpmod = 1;
bankmod = 0;
}
@ -1276,11 +1168,12 @@ static void dradrb_ddr2(struct sysinfo *s)
i = ch << 1;
else
i = (ch << 1) + 1;
dra = dratab[s->dimms[i].banks]
dra = dratab[s->dimms[i].n_banks]
[s->dimms[i].width]
[s->dimms[i].cols-9]
[s->dimms[i].rows-12];
if (s->dimms[i].banks == 1)
if (s->dimms[i].n_banks == N_BANKS_8)
dra |= 0x80;
if (ch == 0) {
c0dra |= dra << (r*8);
@ -1313,12 +1206,10 @@ static void dradrb_ddr2(struct sysinfo *s)
if (ch == 0) {
dra0 = (c0dra >> (8*r)) & 0x7f;
c0drb = (u16)(c0drb + drbtab[dra0]);
s->dimms[i].rank_capacity_mb = drbtab[dra0] << 6;
MCHBAR16(0x200 + 2*r) = c0drb;
} else {
dra1 = (c1dra >> (8*r)) & 0x7f;
c1drb = (u16)(c1drb + drbtab[dra1]);
s->dimms[i].rank_capacity_mb = drbtab[dra1] << 6;
MCHBAR16(0x600 + 2*r) = c1drb;
}
}
@ -1588,9 +1479,6 @@ void raminit_ddr2(struct sysinfo *s)
u8 r, bank;
u32 reg32;
// Select timings based on SPD info
sdram_detect_smallest_params2(s);
if (s->boot_path != BOOT_PATH_WARM_RESET) {
// Clear self refresh
MCHBAR32(PMSTS_MCHBAR) = MCHBAR32(PMSTS_MCHBAR)

31
src/northbridge/intel/x4x/x4x.h
View File

@ -144,6 +144,7 @@
#define TOTAL_DIMMS 4
#define DIMMS_PER_CHANNEL (TOTAL_DIMMS / TOTAL_CHANNELS)
#define RAW_CARD_UNPOPULATED 0xff
#define RAW_CARD_POPULATED 0
#define DIMM_IS_POPULATED(dimms, idx) (dimms[idx].card_type != RAW_CARD_UNPOPULATED)
#define IF_DIMM_POPULATED(dimms, idx) if (dimms[idx].card_type != RAW_CARD_UNPOPULATED)
@ -249,8 +250,14 @@ struct dll_setting {
u8 coarse;
};
enum n_banks {
N_BANKS_4 = 0,
N_BANKS_8 = 1,
};
struct timings {
unsigned int CAS;
unsigned int tclk;
enum fsb_clock fsb_clk;
enum mem_clock mem_clk;
unsigned int tRAS;
@ -267,40 +274,20 @@ struct dimminfo {
unsigned int card_type; /* 0xff: unpopulated,
0xa - 0xf: raw card type A - F */
enum chip_width width;
enum chip_cap chip_capacity;
unsigned int page_size; /* of whole DIMM in Bytes (4096 or 8192) */
unsigned int sides;
unsigned int banks;
enum n_banks n_banks;
unsigned int ranks;
unsigned int rows;
unsigned int cols;
unsigned int cas_latencies;
unsigned int tAAmin;
unsigned int tCKmin;
unsigned int tWR;
unsigned int tRP;
unsigned int tRCD;
unsigned int tRAS;
unsigned int rank_capacity_mb; /* per rank in Megabytes */
u8 spd_data[256];
};
/* The setup is up to two DIMMs per channel */
struct sysinfo {
int txt_enabled;
int cores;
int boot_path;
int max_ddr2_mhz;
int max_ddr3_mt;
enum fsb_clock max_fsb;
int max_fsb_mhz;
int max_render_mhz;
int enable_igd;
int enable_peg;
u16 ggc;
int dimm_config[2];
int dimms_per_ch;
int spd_type;
int channel_capacity[2];
struct timings selected_timings;
@ -346,6 +333,8 @@ u8 decode_pciebar(u32 *const base, u32 *const len);
void sdram_initialize(int boot_path, const u8 *spd_map);
void raminit_ddr2(struct sysinfo *);
void rcven(const struct sysinfo *);
u32 fsb2mhz(u32 speed);
u32 ddr2mhz(u32 speed);
struct acpi_rsdp;
#ifndef __SIMPLE_DEVICE__