[RFC]util/checklist: Remove this functionality

It was only hooked up for galileo board when using the obsolete
FSP1.1. I don't see how it can be useful...

Change-Id: Ifd7cbd664cfa3b729a11c885134fd9b5de62a96c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30691
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
Arthur Heymans 2019-01-06 14:09:31 +01:00 committed by Patrick Georgi
parent 3d3152eec7
commit 3ef017c4d4
16 changed files with 0 additions and 757 deletions

View File

@ -1,160 +0,0 @@
<html>
<head>
<title>Galileo Implementation Status</title>
</title>
<body>
<h1>Galileo Implementation Status<br>2016/07/08 06:51:34 PDT</h1>
<table>
<tr><td colspan=2><b>Legend</b></td></tr>
<tr><td bgcolor="#ffc0c0">Red</td><td>Required - To-be-implemented</td></tr>
<tr><td bgcolor="#ffffc0">Yellow</td><td>Optional</td></tr>
<tr><td bgcolor="#c0ffc0">Green</td><td>Implemented</td></tr>
</table>
<table>
<tr valign="top">
<td>
<table border=1>
<tr><th colspan=2>bootblock: 100% Done</th></tr>
<tr><th>Type</th><th>Routine</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>bootblock_c_entry</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>bootblock_main_with_timestamp</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>bootblock_mainboard_early_init</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>bootblock_mainboard_init</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>bootblock_pre_c_entry</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>bootblock_protected_mode_entry</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>bootblock_soc_early_init</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>bootblock_soc_init</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>tsc_freq_mhz</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>uart_init</td></tr>
</table>
</td>
<td width=5>&nbsp;</td>
<td>
<table border=1>
<tr><th colspan=2>romstage: 67% Done</th></tr>
<tr><th>Type</th><th>Routine</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>arch_segment_loaded</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>backup_top_of_ram</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>boot_device_init</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>car_mainboard_post_console_init</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>car_mainboard_pre_console_init</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>car_soc_post_console_init</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>car_soc_pre_console_init</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>car_stage_entry</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>cbfs_master_header_locator</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>cbmem_fail_resume</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>clear_recovery_mode_switch</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>cpu_smi_handler</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>fill_power_state</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>get_sw_write_protect_state</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>get_top_of_ram</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>gpio_acpi_path</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>init_timer</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>mainboard_add_dimm_info</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>mainboard_check_ec_image</td></tr>
<tr bgcolor=#ffc0c0><td>Required</td><td>mainboard_fill_spd_data</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>mainboard_io_trap_handler</td></tr>
<tr bgcolor=#ffc0c0><td>Required</td><td>mainboard_memory_init_params</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>mainboard_post</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>mainboard_romstage_entry</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>mainboard_save_dimm_info</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>mainboard_smi_apmc</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>mainboard_smi_gpi</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>mainboard_smi_sleep</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>map_oprom_vendev</td></tr>
<tr bgcolor=#ffc0c0><td>Required</td><td>migrate_power_state</td></tr>
<tr bgcolor=#ffc0c0><td>Required</td><td>mrc_cache_get_current_with_version</td></tr>
<tr bgcolor=#ffc0c0><td>Required</td><td>mrc_cache_stash_data_with_version</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>platform_prog_run</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>platform_segment_loaded</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>print_fsp_info</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>raminit</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>ramstage_cache_invalid</td></tr>
<tr bgcolor=#ffc0c0><td>Required</td><td>report_memory_config</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>romstage_common</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>save_chromeos_gpios</td></tr>
<tr bgcolor=#ffc0c0><td>Required</td><td>set_max_freq</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>setup_stack_and_mtrrs</td></tr>
<tr bgcolor=#ffc0c0><td>Required</td><td>smm_region</td></tr>
<tr bgcolor=#ffc0c0><td>Required</td><td>smm_region_size</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>soc_after_ram_init</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>soc_display_memory_init_params</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>soc_memory_init_params</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>soc_pre_ram_init</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>southbridge_smi_handler</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>stage_cache_add</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>stage_cache_load_stage</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>timestamp_get</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>tsc_freq_mhz</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>vb2ex_hwcrypto_digest_extend</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>vb2ex_hwcrypto_digest_finalize</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>vb2ex_hwcrypto_digest_init</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>vboot_platform_prepare_reboot</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>verstage_mainboard_init</td></tr>
</table>
</td>
<td width=5>&nbsp;</td>
<td>
<table border=1>
<tr><th colspan=2>ramstage: 60% Done</th></tr>
<tr><th>Type</th><th>Routine</td></tr>
<tr bgcolor=#ffc0c0><td>Required</td><td>acpi_create_serialio_ssdt</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>arch_segment_loaded</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>backup_top_of_ram</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>boot_device_init</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>cbfs_master_header_locator</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>cbmem_fail_resume</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>clear_recovery_mode_switch</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>cpu_smi_handler</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>fw_cfg_acpi_tables</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>get_sw_write_protect_state</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>get_top_of_ram</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>gpio_acpi_path</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>init_timer</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>lb_board</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>lb_framebuffer</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>mainboard_add_dimm_info</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>mainboard_io_trap_handler</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>mainboard_post</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>mainboard_silicon_init_params</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>mainboard_smi_apmc</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>mainboard_smi_gpi</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>mainboard_smi_sleep</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>mainboard_suspend_resume</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>map_oprom_vendev</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>mirror_payload</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>northbridge_smi_handler</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>nvm_mmio_to_flash_offset</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>platform_prog_run</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>platform_segment_loaded</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>save_chromeos_gpios</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>smbios_mainboard_bios_version</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>smbios_mainboard_manufacturer</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>smbios_mainboard_product_name</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>smbios_mainboard_serial_number</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>smbios_mainboard_set_uuid</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>smbios_mainboard_version</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>smm_disable_busmaster</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>soc_after_silicon_init</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>soc_display_silicon_init_params</td></tr>
<tr bgcolor=#ffc0c0><td>Required</td><td>soc_fill_acpi_wake</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>soc_silicon_init_params</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>soc_skip_ucode_update</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>southbridge_smi_handler</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>stage_cache_add</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>stage_cache_load_stage</td></tr>
<tr bgcolor=#ffc0c0><td>Required</td><td>timestamp_get</td></tr>
<tr bgcolor=#ffc0c0><td>Required</td><td>timestamp_tick_freq_mhz</td></tr>
<tr bgcolor=#c0ffc0><td>Required</td><td>tsc_freq_mhz</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>vb2ex_hwcrypto_digest_extend</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>vb2ex_hwcrypto_digest_finalize</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>vb2ex_hwcrypto_digest_init</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>wifi_regulatory_domain</td></tr>
<tr bgcolor=#ffffc0><td>Optional</td><td>write_smp_table</td></tr>
</table>
</td>
<td width=5>&nbsp;</td>
</tr>
</table>
</body>
</html>

View File

@ -17,7 +17,6 @@
<li><a target="_blank" href="../SoC/soc.html">SoC</a> support</li> <li><a target="_blank" href="../SoC/soc.html">SoC</a> support</li>
<li><a target="_blank" href="../fsp1_1.html">FSP 1.1</a> integration</li> <li><a target="_blank" href="../fsp1_1.html">FSP 1.1</a> integration</li>
<li><a target="_blank" href="board.html">Board</a> support</li> <li><a target="_blank" href="board.html">Board</a> support</li>
<li><a target="_blank" href="Galileo_checklist.html">Implementation Checklist</a></li>
</ul> </ul>
</td> </td>
</tr> </tr>

View File

@ -1091,36 +1091,6 @@ config MAX_REBOOT_CNT
with the normal image enabled before assuming the normal image is defective with the normal image enabled before assuming the normal image is defective
and switching to the fallback image. and switching to the fallback image.
config CREATE_BOARD_CHECKLIST
bool
default n
help
When selected, creates a webpage showing the implementation status for
the board. Routines highlighted in green are complete, yellow are
optional and red are required and must be implemented. A table is
produced for each stage of the boot process except the bootblock. The
red items may be used as an implementation checklist for the board.
config MAKE_CHECKLIST_PUBLIC
bool
default n
help
When selected, build/$(CONFIG_MAINBOARD_PART_NUMBER)_checklist.html
is copied into the Documentation/$(CONFIG_MAINBOARD_VENDOR)/Board
directory.
config CHECKLIST_DATA_FILE_LOCATION
string
help
Location of the <stage>_complete.dat and <stage>_optional.dat files
that are consumed during checklist processing. <stage>_complete.dat
contains the symbols that are expected to be in the resulting image.
<stage>_optional.dat is a subset of <stage>_complete.dat and contains
a list of weak symbols which the resulting image may consume. Other
symbols contained only in <stage>_complete.dat will be flagged as
required and not implemented if a weak implementation is found in the
resulting image.
config UNCOMPRESSED_RAMSTAGE config UNCOMPRESSED_RAMSTAGE
bool bool

View File

@ -86,10 +86,6 @@ config USE_GENERIC_FSP_CAR_INC
The chipset can select this to use a generic cache_as_ram.inc file The chipset can select this to use a generic cache_as_ram.inc file
that should be good for all FSP based platforms. that should be good for all FSP based platforms.
config CHECKLIST_DATA_FILE_LOCATION
string
default "src/vendorcode/intel/fsp/fsp1_1/checklist"
config RESET_ON_INVALID_RAMSTAGE_CACHE config RESET_ON_INVALID_RAMSTAGE_CACHE
bool "Reset the system on S3 wake when ramstage cache invalid." bool "Reset the system on S3 wake when ramstage cache invalid."
default n default n

View File

@ -146,10 +146,6 @@ config VERIFY_HOBS
Verify that the HOBs required by coreboot are returned by FSP and Verify that the HOBs required by coreboot are returned by FSP and
that the resource HOBs are in the correct order and position. that the resource HOBs are in the correct order and position.
config CHECKLIST_DATA_FILE_LOCATION
string
default "src/vendorcode/intel/fsp/fsp2_0/checklist"
config RESET_ON_INVALID_RAMSTAGE_CACHE config RESET_ON_INVALID_RAMSTAGE_CACHE
bool "Reset the system on S3 wake when ramstage cache invalid." bool "Reset the system on S3 wake when ramstage cache invalid."
default n default n

View File

@ -18,7 +18,6 @@ if BOARD_INTEL_GALILEO
config BOARD_SPECIFIC_OPTIONS config BOARD_SPECIFIC_OPTIONS
def_bool y def_bool y
select BOARD_ROMSIZE_KB_8192 select BOARD_ROMSIZE_KB_8192
# select CREATE_BOARD_CHECKLIST
select ENABLE_BUILTIN_HSUART1 select ENABLE_BUILTIN_HSUART1
select HAVE_ACPI_TABLES select HAVE_ACPI_TABLES
select SOC_INTEL_QUARK select SOC_INTEL_QUARK
@ -52,7 +51,6 @@ choice
config FSP_VERSION_1_1 config FSP_VERSION_1_1
bool "FSP 1.1" bool "FSP 1.1"
select CREATE_BOARD_CHECKLIST
select PLATFORM_USES_FSP1_1 select PLATFORM_USES_FSP1_1
# select ADD_FSP_RAW_BIN # select ADD_FSP_RAW_BIN
help help

View File

@ -1,10 +0,0 @@
bootblock_c_entry
bootblock_mainboard_early_init
bootblock_mainboard_init
bootblock_main_with_timestamp
bootblock_pre_c_entry
bootblock_protected_mode_entry
bootblock_soc_early_init
bootblock_soc_init
tsc_freq_mhz
uart_init

View File

@ -1,6 +0,0 @@
bootblock_c_entry
bootblock_mainboard_early_init
bootblock_mainboard_init
bootblock_soc_early_init
bootblock_soc_init
uart_init

View File

@ -1,53 +0,0 @@
acpi_create_serialio_ssdt
arch_segment_loaded
backup_top_of_ram
boot_device_init
cbfs_master_header_locator
cbmem_fail_resume
clear_recovery_mode_switch
cpu_smi_handler
fw_cfg_acpi_tables
get_sw_write_protect_state
get_top_of_ram
gpio_acpi_path
init_timer
lb_board
lb_framebuffer
mainboard_add_dimm_info
mainboard_io_trap_handler
mainboard_post
mainboard_silicon_init_params
mainboard_smi_apmc
mainboard_smi_gpi
mainboard_smi_sleep
mainboard_suspend_resume
map_oprom_vendev
mirror_payload
northbridge_smi_handler
nvm_mmio_to_flash_offset
platform_prog_run
platform_segment_loaded
save_chromeos_gpios
smbios_mainboard_bios_version
smbios_mainboard_manufacturer
smbios_mainboard_product_name
smbios_mainboard_serial_number
smbios_mainboard_set_uuid
smbios_mainboard_version
smm_disable_busmaster
soc_after_silicon_init
soc_display_silicon_init_params
soc_fill_acpi_wake
soc_silicon_init_params
soc_skip_ucode_update
southbridge_smi_handler
stage_cache_add
stage_cache_load_stage
timestamp_get
timestamp_tick_freq_mhz
tsc_freq_mhz
vb2ex_hwcrypto_digest_extend
vb2ex_hwcrypto_digest_finalize
vb2ex_hwcrypto_digest_init
wifi_regulatory_domain
write_smp_table

View File

@ -1,46 +0,0 @@
arch_segment_loaded
backup_top_of_ram
boot_device_init
cbmem_fail_resume
clear_recovery_mode_switch
cpu_smi_handler
fw_cfg_acpi_tables
get_sw_write_protect_state
get_top_of_ram
gpio_acpi_path
lb_board
lb_framebuffer
mainboard_add_dimm_info
mainboard_io_trap_handler
mainboard_post
mainboard_silicon_init_params
mainboard_smi_apmc
mainboard_smi_gpi
mainboard_smi_sleep
mainboard_suspend_resume
map_oprom_vendev
mirror_payload
northbridge_smi_handler
nvm_mmio_to_flash_offset
platform_prog_run
platform_segment_loaded
save_chromeos_gpios
smbios_mainboard_bios_version
smbios_mainboard_manufacturer
smbios_mainboard_product_name
smbios_mainboard_serial_number
smbios_mainboard_set_uuid
smbios_mainboard_version
smm_disable_busmaster
soc_after_silicon_init
soc_display_silicon_init_params
soc_silicon_init_params
soc_skip_ucode_update
southbridge_smi_handler
stage_cache_add
stage_cache_load_stage
vb2ex_hwcrypto_digest_extend
vb2ex_hwcrypto_digest_finalize
vb2ex_hwcrypto_digest_init
wifi_regulatory_domain
write_smp_table

View File

@ -1,53 +0,0 @@
arch_segment_loaded
backup_top_of_ram
boot_device_init
car_stage_entry
cbfs_master_header_locator
cbmem_fail_resume
clear_recovery_mode_switch
cpu_smi_handler
fill_power_state
get_sw_write_protect_state
get_top_of_ram
gpio_acpi_path
init_timer
mainboard_add_dimm_info
mainboard_check_ec_image
mainboard_fill_spd_data
mainboard_io_trap_handler
mainboard_memory_init_params
mainboard_post
mainboard_romstage_entry
mainboard_save_dimm_info
mainboard_smi_apmc
mainboard_smi_gpi
mainboard_smi_sleep
map_oprom_vendev
migrate_power_state
mrc_cache_get_current_with_version
mrc_cache_stash_data_with_version
platform_prog_run
platform_segment_loaded
print_fsp_info
raminit
ramstage_cache_invalid
report_memory_config
romstage_common
save_chromeos_gpios
set_max_freq
setup_stack_and_mtrrs
smm_region
smm_region_size
soc_after_ram_init
soc_display_memory_init_params
soc_memory_init_params
soc_pre_ram_init
southbridge_smi_handler
stage_cache_add
stage_cache_load_stage
timestamp_get
tsc_freq_mhz
vb2ex_hwcrypto_digest_extend
vb2ex_hwcrypto_digest_finalize
vb2ex_hwcrypto_digest_init
vboot_platform_prepare_reboot

View File

@ -1,33 +0,0 @@
arch_segment_loaded
backup_top_of_ram
boot_device_init
car_stage_entry
cbmem_fail_resume
clear_recovery_mode_switch
cpu_smi_handler
get_sw_write_protect_state
get_top_of_ram
gpio_acpi_path
mainboard_add_dimm_info
mainboard_check_ec_image
mainboard_io_trap_handler
mainboard_post
mainboard_romstage_entry
mainboard_save_dimm_info
mainboard_smi_apmc
mainboard_smi_gpi
mainboard_smi_sleep
map_oprom_vendev
platform_prog_run
platform_segment_loaded
save_chromeos_gpios
soc_after_ram_init
soc_display_memory_init_params
soc_memory_init_params
soc_pre_ram_init
southbridge_smi_handler
stage_cache_add
stage_cache_load_stage
vb2ex_hwcrypto_digest_extend
vb2ex_hwcrypto_digest_finalize
vb2ex_hwcrypto_digest_init

View File

@ -1,33 +0,0 @@
arch_segment_loaded
backup_top_of_ram
boot_device_init
car_mainboard_post_console_init
car_mainboard_pre_console_init
car_soc_post_console_init
car_soc_pre_console_init
cbfs_master_header_locator
cbmem_fail_resume
clear_recovery_mode_switch
cpu_smi_handler
get_sw_write_protect_state
gpio_acpi_path
init_timer
mainboard_check_ec_image
mainboard_io_trap_handler
mainboard_post
mainboard_smi_apmc
mainboard_smi_gpi
mainboard_smi_sleep
map_oprom_vendev
platform_prog_run
platform_segment_loaded
save_chromeos_gpios
stage_cache_add
stage_cache_load_stage
timestamp_get
tsc_freq_mhz
vb2ex_hwcrypto_digest_extend
vb2ex_hwcrypto_digest_finalize
vb2ex_hwcrypto_digest_init
vboot_platform_prepare_reboot
verstage_mainboard_init

View File

@ -1,20 +0,0 @@
arch_segment_loaded
backup_top_of_ram
boot_device_init
car_mainboard_post_console_init
car_mainboard_pre_console_init
car_soc_post_console_init
car_soc_pre_console_init
mainboard_check_ec_image
mainboard_post
platform_prog_run
platform_segment_loaded
stage_cache_add
stage_cache_load_stage
timestamp_get
tsc_freq_mhz
vb2ex_hwcrypto_digest_extend
vb2ex_hwcrypto_digest_finalize
vb2ex_hwcrypto_digest_init
vboot_platform_prepare_reboot
verstage_mainboard_init

View File

@ -1,301 +0,0 @@
#
# This file is part of the coreboot project.
#
# Copyright (C) 2016 Intel Corporation.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
###########################################################################
# Instructions
###########################################################################
#
# Create new control files for checklist:
#
# 1. Remove any selection for CREATE_BOARD_CHECKLIST
# 2. Remove any selection for MAKE_CHECKLIST_PUBLIC
# 3. make
# 4. nm build/cbfs/fallback/<stage>.debug > <stage>_symbols.txt
# 6. sed 's/^...........//' <stage>_symbols.txt > <stage>_complete.dat
# 7. grep -F " W " <stage>_symbols.txt | sed 's/^...........//' \
# > <stage>_optional.dat
# 8. Edit <stage>_complete.dat to remove any symbols that are not
# desired in the report
# 9. Edit <stage>_optional.dat to remove any symbols that are
# required to be implemented
#
# Create a board checklist:
#
# 1. select CREATE_BOARD_CHECKLIST
# 2. Optionally: select MAKE_CHECKLIST_PUBLIC
# 3. Specify CONFIG_CHECKLIST_DATA_FILE_LOCATION
# 4. make
#
# Build Errors:
# * No checklist built - verify CREATE_BOARD_CHECKLIST is selected in
# board Kconfig file. Do a make clean
# * <stage>_complete.dat not found - verify that
# CONFIG_CHECKLIST_DATA_FILE_LOCATION points to the directory
# containing the checklist data files. Build the checklist
# data files if necessary.
# * Segmentation fault - most likely caused by $(NM_$(class)) not being
# set.
#
###########################################################################
# Build the board implementation checklist
###########################################################################
# Only build the checklist for boards under development
ifeq ($(CONFIG_CREATE_BOARD_CHECKLIST),y)
#
# Extract the symbol table from the image
#
%.symbol_table: %.elf %.debug
$(NM_$(class)) $(*D)/$(*F).debug > $@
$(NM_$(class)) $< >> $@
#
# All symbols in the image
#
# 1. Remove the address and symbol type
# 2. Sort the table into alphabetical order
# 3. Remove any duplicates
#
%.symbols: %.symbol_table
sed 's/^...........//' $< > $@.tmp
sort $@.tmp > $@.tmp2
uniq $@.tmp2 > $@
rm $@.tmp $@.tmp2
#
# Weak symbols in the image
#
# 1. Find the weak symbols
# 2. Remove the address and symbol type
# 3. Sort the table into alphabetical order
# 4. Remove any duplicates
#
%.weak: %.symbol_table
grep -F " W " $< | sed 's/^...........//' > $@.tmp
sort $@.tmp > $@.tmp2
uniq $@.tmp2 > $@
rm $@.tmp $@.tmp2
#
# Expected symbols in the image
#
# 1. Get the complete list of expected symbols in the image
# 2. Sort the table into alphabetical order
# 3. Remove any duplicates
#
%.expected: %.symbol_table
cp $(CONFIG_CHECKLIST_DATA_FILE_LOCATION)/$(basename $(*F))_complete.dat $@.tmp
cat $(CONFIG_CHECKLIST_DATA_FILE_LOCATION)/$(basename $(*F))_optional.dat >> $@.tmp
# If no separate verstage, combine verstage and romstage routines into a single list
if [ "$(*F)" = "romstage" ]; then \
if [ ! -e $(*D)/verstage.elf ]; then \
if [ ! -e $(*D)/postcar.elf ]; then \
cat $(CONFIG_CHECKLIST_DATA_FILE_LOCATION)/verstage_complete.dat >> $@.tmp; \
cat $(CONFIG_CHECKLIST_DATA_FILE_LOCATION)/verstage_optional.dat >> $@.tmp; \
fi; \
fi; \
fi
sort $@.tmp > $@.tmp2
uniq $@.tmp2 > $@
rm $@.tmp $@.tmp2
#
# Optional symbols in the image
#
# 1. Get the list of optional symbols in the image
# 2. Sort the table into alphabetical order
# 3. Remove any duplicates
#
%.optional: %.symbol_table
cp $(CONFIG_CHECKLIST_DATA_FILE_LOCATION)/$(basename $(*F))_optional.dat $@.tmp
# If no separate verstage, combine verstage and romstage routines into a single list
if [ "$(*F)" = "romstage" ]; then \
if [ ! -e $(*D)/verstage.elf ]; then \
if [ ! -e $(*D)/postcar.elf ]; then \
cat $(CONFIG_CHECKLIST_DATA_FILE_LOCATION)/verstage_optional.dat >> $@.tmp; \
fi; \
fi; \
fi
sort $@.tmp > $@.tmp2
uniq $@.tmp2 > $@
rm $@.tmp $@.tmp2
#
# Expected Symbols Optional Weak Done Type
# no yes no d/c yes Don't display
# yes no no no no Required - not implemented
# yes no yes no no Optional - not implemented
# yes yes yes yes no Optional - not implemented
# yes yes no no yes Required - implemented
# yes yes yes no yes Required - implemented
#
# Implemented routines are in the symbol table and are not weak
#
# 1. Remove expected symbols which are not in the image (not implemented yet)
# 2. Remove weak symbols from the list (not implemented yet)
#
%.done: %.symbols %.expected %.weak %.optional
comm -12 $(*D)/$(*F).expected $(*D)/$(*F).symbols | sed "s/^[ \t]*//" > $@.tmp
comm -23 $@.tmp $(*D)/$(*F).weak | sed "s/^[ \t]*//" > $@
rm $@.tmp
#
# Remove any routines that are implemented
#
%.optional2: %.optional %.done
comm -23 $^ | sed "s/^[ \t]*//" > $@
#
# Remove any implemented or optional routines
#
%.tbd: %.expected %.done %.optional2
comm -23 $(*D)/$(*F).expected $(*D)/$(*F).done | sed "s/^[ \t]*//" > $@.tmp
comm -23 $@.tmp $(*D)/$(*F).optional2 | sed "s/^[ \t]*//" > $@
rm $@.tmp
#
# Build the implementation table for each stage
# 1. Color code the rows
# * Done table rows are in green
# * Optional table rows are in yellow
# * TBD table rows are in red
# 2. Add the row termination
# 3. Sort the rows into alphabetical order
#
%.table_rows: %.optional2 %.done %.expected %.tbd
sed -e 's/^/<tr bgcolor=#c0ffc0><td>Required<\/td><td>/' $(*D)/$(basename $(*F)).done > $@.tmp
sed -e 's/^/<tr bgcolor=#ffffc0><td>Optional<\/td><td>/' $(*D)/$(basename $(*F)).optional2 >> $@.tmp
if [ -s $(*D)/$(basename $(*F)).tbd ]; then \
sed -e 's/^/<tr bgcolor=#ffc0c0><td>Required<\/td><td>/' $(*D)/$(basename $(*F)).tbd >> $@.tmp; \
fi
sed -e 's/$$/<\/td><\/tr>/' -i $@.tmp
sort -t ">" -k4 $@.tmp > $@
rm $@.tmp
#
# Count the lines in the done file
#
done_lines = $$(wc -l $(*D)/$(basename $(*F)).done | sed 's/ .*//')
#
# Count the lines in the optional file
#
optional_lines = $$(wc -l $(*D)/$(basename $(*F)).optional2 | sed 's/ .*//')
#
# Count the lines in the expected file
#
expected_lines = $$(wc -l $(*D)/$(basename $(*F)).expected | sed 's/ .*//')
# Compute the percentage done by routine count
percent_complete = $$(($(done_lines) * 100 / ($(expected_lines) - $(optional_lines))))
#
# Build the table
# 1. Add the table header
# 2. Add the table rows
# 3. Add the table trailer
#
%.html: %.table_rows
echo "<table border=1>" > $@
echo "<tr><th colspan=2>$(basename $(*F)): $(percent_complete)% Done</th></tr>" >> $@
echo "<tr><th>Type</th><th>Routine</td></tr>" >> $@
cat $< >> $@
echo "</table>" >> $@
#
# Determine which HTML files to include into the webpage
#
ifeq ($(CONFIG_C_ENVIRONMENT_BOOTBLOCK),y)
html_table_files += $(objcbfs)/bootblock.html
endif
ifeq ($(CONFIG_SEPARATE_VERSTAGE),y)
html_table_files += $(objcbfs)/verstage.html
endif
html_table_files += $(objcbfs)/romstage.html
ifeq ($(CONFIG_POSTCAR_STAGE),y)
html_table_files += $(objcbfs)/postcar.html
endif
html_table_files += $(objcbfs)/ramstage.html
#
# Create a list with each file on a separate line
#
list_of_html_files = $(subst _NEWLINE_,${\n},${html_table_files})
#
# Get the date for the webpage
#
current_date_time = $$(date +"%Y/%m/%d %T %Z")
#
# Build the webpage from the implementation tables
# 1. Add the header to the webpage
# 2. Add the legend to the webpage
# 3. Use a table to place stage tables side-by-side
# 4. Add the stage tables to the webpage
# 5. Separate the stage tables
# 6. Terminate the outer table
# 7. Add the trailer to the webpage
#
$(obj)/$(CONFIG_MAINBOARD_PART_NUMBER)_checklist.html: $(html_table_files)
echo "<html>" > $@
echo "<head>" >> $@
echo "<title>$(CONFIG_MAINBOARD_PART_NUMBER) Implementation Status</title>" >> $@
echo "</title>" >> $@
echo "<body>" >> $@
echo "<h1>$(CONFIG_MAINBOARD_PART_NUMBER) Implementation Status<br>$(current_date_time)</h1>" >> $@
echo "<table>" >> $@
echo " <tr><td colspan=2><b>Legend</b></td></tr>" >> $@
echo " <tr><td bgcolor=\"#ffc0c0\">Red</td><td>Required - To-be-implemented</td></tr>" >> $@
echo " <tr><td bgcolor=\"#ffffc0\">Yellow</td><td>Optional</td></tr>" >> $@
echo " <tr><td bgcolor=\"#c0ffc0\">Green</td><td>Implemented</td></tr>" >> $@
echo "</table>" >> $@
echo "<table>" >> $@
echo " <tr valign=\"top\">" >> $@
for table in $(list_of_html_files); do \
echo " <td>" >> $@; \
cat $$table >> $@; \
echo " </td>" >> $@; \
echo " <td width=5>&nbsp;</td>" >> $@; \
done
echo " </tr>" >> $@
echo "</table>" >> $@
echo "</body>" >> $@
echo "</html>" >> $@
#
# Copy the output file into the Documentation directory
#
Documentation/$(CONFIG_MAINBOARD_VENDOR)/Board/$(CONFIG_MAINBOARD_PART_NUMBER)_checklist.html: $(obj)/$(CONFIG_MAINBOARD_PART_NUMBER)_checklist.html
if [ ! -d Documentation/$(CONFIG_MAINBOARD_VENDOR) ]; then \
mkdir Documentation/$(CONFIG_MAINBOARD_VENDOR); \
fi
if [ ! -d Documentation/$(CONFIG_MAINBOARD_VENDOR)/Board ]; then \
mkdir Documentation/$(CONFIG_MAINBOARD_VENDOR)/Board; \
fi
cp $< $@
#
# Determine where to place the output file
#
ifeq ($(CONFIG_MAKE_CHECKLIST_PUBLIC),y)
INTERMEDIATE+=Documentation/$(CONFIG_MAINBOARD_VENDOR)/Board/$(CONFIG_MAINBOARD_PART_NUMBER)_checklist.html
else
INTERMEDIATE+=$(obj)/$(CONFIG_MAINBOARD_PART_NUMBER)_checklist.html
endif
endif

View File

@ -1 +0,0 @@
Board implementation checklist generator `Make`