remove old config files, adopt to new config method. fix resource map (?)
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1107 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
parent
dad60489d5
commit
5282cd0875
|
@ -1,36 +1,180 @@
|
|||
uses HAVE_MP_TABLE
|
||||
uses HAVE_PIRQ_TABLE
|
||||
uses USE_FALLBACK_IMAGE
|
||||
#
|
||||
#
|
||||
uses MAINBOARD
|
||||
uses ARCH
|
||||
uses FALLBACK_SIZE
|
||||
uses ROM_SIZE
|
||||
uses ROM_SECTION_SIZE
|
||||
uses ROM_IMAGE_SIZE
|
||||
uses ROM_SECTION_SIZE
|
||||
uses ROM_SECTION_OFFSET
|
||||
uses CONFIG_ROM_STREAM_START
|
||||
uses PAYLOAD_SIZE
|
||||
uses _ROMBASE
|
||||
uses XIP_ROM_SIZE
|
||||
uses XIP_ROM_BASE
|
||||
|
||||
###
|
||||
### Set all of the defaults for an x86 architecture
|
||||
### Build options
|
||||
###
|
||||
#
|
||||
#
|
||||
|
||||
##
|
||||
## Build code for the fallback boot
|
||||
##
|
||||
option HAVE_FALLBACK_BOOT=1
|
||||
|
||||
##
|
||||
## Build code to reset the motherboard from linuxBIOS
|
||||
##
|
||||
option HAVE_HARD_RESET=1
|
||||
|
||||
##
|
||||
## Build code to export a programmable irq routing table
|
||||
##
|
||||
option HAVE_PIRQ_TABLE=1
|
||||
option IRQ_SLOT_COUNT=7
|
||||
|
||||
##
|
||||
## Build code to export an x86 MP table
|
||||
## Useful for specifying IRQ routing values
|
||||
##
|
||||
option HAVE_MP_TABLE=1
|
||||
|
||||
##
|
||||
## Build code to export a CMOS option table
|
||||
##
|
||||
option HAVE_OPTION_TABLE=1
|
||||
|
||||
##
|
||||
## Build code for SMP support
|
||||
## Only worry about 2 micro processors
|
||||
##
|
||||
option CONFIG_SMP=1
|
||||
option CONFIG_MAX_CPUS=4
|
||||
|
||||
##
|
||||
## Build code to setup a generic IOAPIC
|
||||
##
|
||||
option CONFIG_IOAPIC=1
|
||||
|
||||
##
|
||||
## Clean up the motherboard id strings
|
||||
##
|
||||
option MAINBOARD_PART_NUMBER="QUARTET"
|
||||
option MAINBOARD_VENDOR="AMD"
|
||||
|
||||
###
|
||||
### Build the objects we have code for in this directory.
|
||||
### LinuxBIOS layout values
|
||||
###
|
||||
##object mainboard.o
|
||||
driver mainboard.o
|
||||
object static_devices.o
|
||||
if HAVE_MP_TABLE object mptable.o end
|
||||
if HAVE_PIRQ_TABLE object irq_tables.o end
|
||||
#
|
||||
|
||||
## ROM_SIZE is the size of boot ROM that this board will use.
|
||||
option ROM_SIZE = 524288
|
||||
|
||||
## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
|
||||
option ROM_IMAGE_SIZE = 65536
|
||||
|
||||
##
|
||||
## Use a small 8K stack
|
||||
##
|
||||
option STACK_SIZE=0x2000
|
||||
|
||||
##
|
||||
## Use a small 16K heap
|
||||
##
|
||||
option HEAP_SIZE=0x4000
|
||||
|
||||
##
|
||||
## Only use the option table in a normal image
|
||||
##
|
||||
option USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
|
||||
|
||||
##
|
||||
## Compute the location and size of where this firmware image
|
||||
## (linuxBIOS plus bootloader) will live in the boot rom chip.
|
||||
##
|
||||
if USE_FALLBACK_IMAGE
|
||||
option ROM_SECTION_SIZE = FALLBACK_SIZE
|
||||
option ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
|
||||
else
|
||||
option ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
|
||||
option ROM_SECTION_OFFSET = 0
|
||||
end
|
||||
|
||||
##
|
||||
## Compute the start location and size size of
|
||||
## The linuxBIOS bootloader.
|
||||
##
|
||||
option PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
|
||||
option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
|
||||
option CONFIG_ROM_STREAM = 1
|
||||
|
||||
##
|
||||
## Compute where this copy of linuxBIOS will start in the boot rom
|
||||
##
|
||||
option _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
|
||||
|
||||
##
|
||||
## Compute a range of ROM that can cached to speed up linuxBIOS,
|
||||
## execution speed.
|
||||
##
|
||||
## XIP_ROM_SIZE must be a power of 2.
|
||||
## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
|
||||
##
|
||||
option XIP_ROM_SIZE=65536
|
||||
option XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
|
||||
|
||||
##
|
||||
## Set all of the defaults for an x86 architecture
|
||||
##
|
||||
|
||||
arch i386 end
|
||||
#cpu k8 end
|
||||
#
|
||||
###
|
||||
### Build our 16 bit and 32 bit linuxBIOS entry code
|
||||
###
|
||||
|
||||
##
|
||||
## Build the objects we have code for in this directory.
|
||||
##
|
||||
|
||||
#object mainboard.o
|
||||
driver mainboard.o
|
||||
#object static_devices.o
|
||||
if HAVE_MP_TABLE object mptable.o end
|
||||
if HAVE_PIRQ_TABLE object irq_tables.o end
|
||||
object reset.o
|
||||
|
||||
##
|
||||
## Romcc output
|
||||
##
|
||||
makerule ./failover.E
|
||||
depends "$(MAINBOARD)/failover.c"
|
||||
action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E"
|
||||
end
|
||||
|
||||
makerule ./failover.inc
|
||||
depends "./failover.E ./romcc"
|
||||
action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"
|
||||
end
|
||||
|
||||
makerule ./auto.E
|
||||
depends "$(MAINBOARD)/auto.c"
|
||||
action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
|
||||
end
|
||||
makerule ./auto.inc
|
||||
depends "./auto.E ./romcc"
|
||||
action "./romcc -mcpu=k8 -O ./auto.E > auto.inc"
|
||||
end
|
||||
|
||||
##
|
||||
## Build our 16 bit and 32 bit linuxBIOS entry code
|
||||
##
|
||||
mainboardinit cpu/i386/entry16.inc
|
||||
mainboardinit cpu/i386/entry32.inc
|
||||
ldscript /cpu/i386/entry16.lds
|
||||
ldscript /cpu/i386/entry32.lds
|
||||
#
|
||||
###
|
||||
### Build our reset vector (This is where linuxBIOS is entered)
|
||||
###
|
||||
|
||||
##
|
||||
## Build our reset vector (This is where linuxBIOS is entered)
|
||||
##
|
||||
if USE_FALLBACK_IMAGE
|
||||
mainboardinit cpu/i386/reset16.inc
|
||||
ldscript /cpu/i386/reset16.lds
|
||||
|
@ -38,81 +182,130 @@ else
|
|||
mainboardinit cpu/i386/reset32.inc
|
||||
ldscript /cpu/i386/reset32.lds
|
||||
end
|
||||
#
|
||||
#### Should this be in the northbridge code?
|
||||
|
||||
### Should this be in the northbridge code?
|
||||
mainboardinit arch/i386/lib/cpu_reset.inc
|
||||
###
|
||||
### Setup the serial port
|
||||
###
|
||||
#mainboardinit superiowinbond/w83627hf/setup_serial.inc
|
||||
mainboardinit pc80/serial.inc
|
||||
mainboardinit arch/i386/lib/console.inc
|
||||
#
|
||||
###
|
||||
### Include an id string (For safe flashing)
|
||||
###
|
||||
|
||||
##
|
||||
## Include an id string (For safe flashing)
|
||||
##
|
||||
mainboardinit arch/i386/lib/id.inc
|
||||
ldscript /arch/i386/lib/id.lds
|
||||
#
|
||||
####
|
||||
#### This is the early phase of linuxBIOS startup
|
||||
#### Things are delicate and we test to see if we should
|
||||
#### failover to another image.
|
||||
####
|
||||
#option MAX_REBOOT_CNT=2
|
||||
|
||||
##
|
||||
## Setup our mtrrs
|
||||
##
|
||||
mainboardinit cpu/k8/earlymtrr.inc
|
||||
|
||||
###
|
||||
### This is the early phase of linuxBIOS startup
|
||||
### Things are delicate and we test to see if we should
|
||||
### failover to another image.
|
||||
###
|
||||
if USE_FALLBACK_IMAGE
|
||||
ldscript /arch/i386/lib/failover.lds
|
||||
mainboardinit ./failover.inc
|
||||
end
|
||||
#
|
||||
###
|
||||
### Setup our mtrrs
|
||||
###
|
||||
mainboardinit cpu/k8/earlymtrr.inc
|
||||
#
|
||||
#
|
||||
####
|
||||
#### O.k. We aren't just an intermediary anymore!
|
||||
####
|
||||
#
|
||||
###
|
||||
### When debugging disable the watchdog timer
|
||||
###
|
||||
##option MAXIMUM_CONSOLE_LOGLEVEL=7
|
||||
#default MAXIMUM_CONSOLE_LOGLEVEL=7
|
||||
#
|
||||
if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc end
|
||||
#
|
||||
###
|
||||
### Romcc output
|
||||
###
|
||||
#makerule ./failover.E dep "$(MAINBOARD)/failover.c" act "$(CPP) -I$(TOP)/src $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failever.E"
|
||||
#makerule ./failover.inc dep "./romcc ./failover.E" act "./romcc -O ./failover.E > failover.inc"
|
||||
#mainboardinit .failover.inc
|
||||
makerule ./auto.E
|
||||
depends "$(MAINBOARD)/auto.c"
|
||||
action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
|
||||
end
|
||||
makerule ./auto.inc
|
||||
depends "./romcc ./auto.E"
|
||||
action "./romcc -O ./auto.E > auto.inc"
|
||||
end
|
||||
mainboardinit ./auto.inc
|
||||
#
|
||||
###
|
||||
### Include the secondary Configuration files
|
||||
###
|
||||
northbridge amd/amdk8
|
||||
end
|
||||
southbridge amd/amd8111
|
||||
end
|
||||
#mainboardinit archi386/smp/secondary.inc
|
||||
superio NSC/pc87360
|
||||
register ".com1={1}, .com2={0}, .floppy=1, .lpt=1, .keyboard=1"
|
||||
end
|
||||
dir /pc80
|
||||
##dir /src/superio/winbond/w83627hf
|
||||
cpu p5 end
|
||||
cpu p6 end
|
||||
cpu k7 end
|
||||
cpu k8 end
|
||||
|
||||
###
|
||||
### O.k. We aren't just an intermediary anymore!
|
||||
###
|
||||
|
||||
##
|
||||
## Setup RAM
|
||||
##
|
||||
mainboardinit cpu/k8/enable_mmx_sse.inc
|
||||
mainboardinit ./auto.inc
|
||||
mainboardinit cpu/k8/disable_mmx_sse.inc
|
||||
|
||||
##
|
||||
## Include the secondary Configuration files
|
||||
##
|
||||
dir /pc80
|
||||
config chip.h
|
||||
|
||||
northbridge amd/amdk8 "mc0"
|
||||
pci 0:18.0
|
||||
pci 0:18.0
|
||||
pci 0:18.0
|
||||
pci 0:18.1
|
||||
pci 0:18.2
|
||||
pci 0:18.3
|
||||
southbridge amd/amd8131 "amd8131"
|
||||
pci 0:0.0
|
||||
pci 0:0.1
|
||||
pci 0:1.0
|
||||
pci 0:1.1
|
||||
end
|
||||
southbridge amd/amd8111 "amd8111"
|
||||
pci 0:0.0
|
||||
pci 0:1.0
|
||||
pci 0:1.1
|
||||
pci 0:1.2
|
||||
pci 0:1.3
|
||||
pci 0:1.5
|
||||
pci 0:1.6
|
||||
superio NSC/pc87360
|
||||
pnp 1:2e.0
|
||||
pnp 1:2e.1
|
||||
pnp 1:2e.2
|
||||
pnp 1:2e.3
|
||||
pnp 1:2e.4
|
||||
pnp 1:2e.5
|
||||
pnp 1:2e.6
|
||||
pnp 1:2e.7
|
||||
pnp 1:2e.8
|
||||
pnp 1:2e.9
|
||||
pnp 1:2e.a
|
||||
register "com1" = "{1, 0, 0x3f8, 4}"
|
||||
register "lpt" = "{1}"
|
||||
end
|
||||
end
|
||||
end
|
||||
|
||||
northbridge amd/amdk8 "mc1"
|
||||
pci 0:19.0
|
||||
pci 0:19.0
|
||||
pci 0:19.0
|
||||
pci 0:19.1
|
||||
pci 0:19.2
|
||||
pci 0:19.3
|
||||
end
|
||||
|
||||
northbridge amd/amdk8 "mc2"
|
||||
pci 0:1a.0
|
||||
pci 0:1a.0
|
||||
pci 0:1a.0
|
||||
pci 0:1a.1
|
||||
pci 0:1a.2
|
||||
pci 0:1a.3
|
||||
end
|
||||
|
||||
northbridge amd/amdk8 "mc3"
|
||||
pci 0:1b.0
|
||||
pci 0:1b.0
|
||||
pci 0:1b.0
|
||||
pci 0:1b.1
|
||||
pci 0:1b.2
|
||||
pci 0:1b.3
|
||||
end
|
||||
|
||||
cpu k8 "cpu0"
|
||||
register "up" = "{ .chip = &amd8131, .ht_width=16, .ht_speed=600 }"
|
||||
end
|
||||
|
||||
cpu k8 "cpu1"
|
||||
end
|
||||
|
||||
cpu k8 "cpu2"
|
||||
end
|
||||
|
||||
cpu k8 "cpu3"
|
||||
end
|
||||
|
||||
##
|
||||
## Include the old serial code for those few places that still need it.
|
||||
##
|
||||
mainboardinit pc80/serial.inc
|
||||
mainboardinit arch/i386/lib/console.inc
|
||||
|
||||
|
|
|
@ -25,6 +25,8 @@ static void memreset_setup(void)
|
|||
outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
|
||||
/* Ensure the BIOS has control of the memory lines */
|
||||
outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
|
||||
outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 30);
|
||||
outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 31);
|
||||
}
|
||||
|
||||
static void memreset(int controllers, const struct mem_controller *ctrl)
|
||||
|
@ -211,7 +213,7 @@ static void main(void)
|
|||
enable_lapic();
|
||||
init_timer();
|
||||
if (!boot_cpu()) {
|
||||
notify_bsp_ap_is_stopped();
|
||||
// notify_bsp_ap_is_stopped();
|
||||
stop_this_cpu();
|
||||
}
|
||||
pc87360_enable_serial();
|
||||
|
|
|
@ -0,0 +1,5 @@
|
|||
struct chip_control mainboard_amd_quartet_control;
|
||||
|
||||
struct mainboard_amd_quartet_config {
|
||||
int nothing;
|
||||
};
|
|
@ -7,25 +7,37 @@
|
|||
|
||||
#include <arch/pirq_routing.h>
|
||||
|
||||
|
||||
const struct irq_routing_table intel_irq_routing_table = {
|
||||
PIRQ_SIGNATURE, /* u32 signature */
|
||||
PIRQ_VERSION, /* u16 version */
|
||||
32+16*7, /* there can be total 7 devices on the bus */
|
||||
32+16*18, /* there can be total 18 devices on the bus */
|
||||
0, /* Where the interrupt router lies (bus) */
|
||||
(5<<3)|3, /* Where the interrupt router lies (dev) */
|
||||
0xc20, /* IRQs devoted exclusively to PCI usage */
|
||||
0x23, /* Where the interrupt router lies (dev) */
|
||||
0, /* IRQs devoted exclusively to PCI usage */
|
||||
0x1022, /* Vendor */
|
||||
0x746b, /* Device */
|
||||
0, /* Crap (miniport) */
|
||||
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
|
||||
0xdf, /* u8 checksum , mod 256 checksum must give zero */
|
||||
{ /* bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
|
||||
{0x02, (5<<3)|0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0xdeb8}}, 0x02, 0x00},
|
||||
{0x02, (6<<3)|0, {{0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0xdeb8}}, 0x03, 0x00},
|
||||
{0x02, (7<<3)|0, {{0x04, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}}, 0x04, 0x00},
|
||||
{0x02, (1<<3)|1, {{0x01, 0xdeb8}, {0x01, 0xdeb8}, {0x01, 0xdeb8}, {0x01, 0xdeb8}}, 0x00, 0x00},
|
||||
{0x00, (5<<3)|1, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}}, 0x00, 0x00},
|
||||
{0x00, (2<<3)|0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}}, 0x00, 0x00},
|
||||
{0xff, 0xff, {{0xff, 0xffff}, {0xff, 0xffff}, {0xff, 0xffff}, {0xff, 0xffff}}, 0xff, 0xff},
|
||||
0x35, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
|
||||
{
|
||||
{0,0xc0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
|
||||
{0,0x50, {{0x1, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
|
||||
{0x2,0x8, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x3, 0},
|
||||
{0x2,0x10, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x4, 0},
|
||||
{0x1,0x18, {{0x4, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0x0, 0},
|
||||
{0x1,0x20, {{0x4, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0x0, 0},
|
||||
{0x2,0x28, {{0x2, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0xa, 0},
|
||||
{0,0x58, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
|
||||
{0x3,0x8, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x1, 0},
|
||||
{0x3,0x10, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x2, 0},
|
||||
{0x3,0x18, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x9, 0},
|
||||
{0,0x30, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
|
||||
{0x1,0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0x4, 0xdef8}}, 0, 0},
|
||||
{0x1,0x28, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x5, 0},
|
||||
{0x1,0x20, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x6, 0},
|
||||
{0x1,0x30, {{0x3, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0xb, 0},
|
||||
{0,0x38, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
|
||||
{0,0xc8, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
|
||||
}
|
||||
};
|
||||
|
|
|
@ -1,11 +1,42 @@
|
|||
|
||||
#include <console/console.h>
|
||||
#include <device/device.h>
|
||||
#include <device/pci.h>
|
||||
#include <device/pci_ids.h>
|
||||
#include <device/pci_ops.h>
|
||||
|
||||
#include <arch/io.h>
|
||||
#include <device/chip.h>
|
||||
#include "../../../northbridge/amd/amdk8/northbridge.h"
|
||||
#include "chip.h"
|
||||
|
||||
|
||||
unsigned long initial_apicid[CONFIG_MAX_CPUS] =
|
||||
{
|
||||
0, 1, 2, 3
|
||||
0, 1, 2, 3,
|
||||
};
|
||||
|
||||
static struct device_operations mainboard_operations = {
|
||||
.read_resources = root_dev_read_resources,
|
||||
.set_resources = root_dev_set_resources,
|
||||
.enable_resources = enable_childrens_resources,
|
||||
.init = 0,
|
||||
.scan_bus = amdk8_scan_root_bus,
|
||||
.enable = 0,
|
||||
};
|
||||
|
||||
static void enumerate(struct chip *chip)
|
||||
{
|
||||
struct chip *child;
|
||||
dev_root.ops = &mainboard_operations;
|
||||
chip->dev = &dev_root;
|
||||
chip->bus = 0;
|
||||
for(child = chip->children; child; child = child->next) {
|
||||
child->bus = &dev_root.link[0];
|
||||
}
|
||||
}
|
||||
struct chip_control mainboard_amd_quartet_control = {
|
||||
.enumerate = enumerate,
|
||||
.name = "AMD Quartet mainboard ",
|
||||
};
|
||||
|
||||
|
|
|
@ -7,8 +7,8 @@
|
|||
void *smp_write_config_table(void *v, unsigned long * processor_map)
|
||||
{
|
||||
static const char sig[4] = "PCMP";
|
||||
static const char oem[8] = "AMD ";
|
||||
static const char productid[12] = "QUARTET ";
|
||||
static const char oem[8] = "LNXI ";
|
||||
static const char productid[12] = "HDAMA ";
|
||||
struct mp_config_table *mc;
|
||||
unsigned char bus_num;
|
||||
unsigned char bus_isa;
|
||||
|
@ -36,40 +36,40 @@ void *smp_write_config_table(void *v, unsigned long * processor_map)
|
|||
smp_write_processors(mc, processor_map);
|
||||
|
||||
{
|
||||
struct pci_dev *dev;
|
||||
uint32_t base;
|
||||
device_t dev;
|
||||
|
||||
/* 8111 */
|
||||
dev = dev_find_slot(0, PCI_DEVFN(0x03,0));
|
||||
dev = dev_find_slot(1, PCI_DEVFN(0x03,0));
|
||||
if (dev) {
|
||||
bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
|
||||
bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
|
||||
bus_isa++;
|
||||
}
|
||||
else {
|
||||
printk_debug("ERROR - could not find PCI 0:03.0, using defaults\n");
|
||||
printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n");
|
||||
|
||||
bus_8111_1 = 3;
|
||||
bus_isa = 4;
|
||||
}
|
||||
/* 8131-1 */
|
||||
dev = dev_find_slot(0, PCI_DEVFN(0x01,0));
|
||||
dev = dev_find_slot(1, PCI_DEVFN(0x01,0));
|
||||
if (dev) {
|
||||
bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
|
||||
|
||||
}
|
||||
else {
|
||||
printk_debug("ERROR - could not find PCI 0:01.0, using defaults\n");
|
||||
printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n");
|
||||
|
||||
bus_8131_1 = 1;
|
||||
}
|
||||
/* 8131-2 */
|
||||
dev = dev_find_slot(0, PCI_DEVFN(0x02,0));
|
||||
dev = dev_find_slot(1, PCI_DEVFN(0x02,0));
|
||||
if (dev) {
|
||||
bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
|
||||
|
||||
}
|
||||
else {
|
||||
printk_debug("ERROR - could not find PCI 0:02.0, using defaults\n");
|
||||
printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n");
|
||||
|
||||
bus_8131_2 = 2;
|
||||
}
|
||||
|
@ -85,17 +85,17 @@ void *smp_write_config_table(void *v, unsigned long * processor_map)
|
|||
|
||||
smp_write_ioapic(mc, 2, 0x11, 0xfec00000);
|
||||
{
|
||||
struct pci_dev *dev;
|
||||
device_t dev;
|
||||
uint32_t base;
|
||||
/* 8131 apic 3 */
|
||||
dev = dev_find_slot(0, PCI_DEVFN(0x01,1));
|
||||
dev = dev_find_slot(1, PCI_DEVFN(0x01,1));
|
||||
if (dev) {
|
||||
base = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
|
||||
base &= PCI_BASE_ADDRESS_MEM_MASK;
|
||||
smp_write_ioapic(mc, 0x03, 0x11, base);
|
||||
}
|
||||
/* 8131 apic 4 */
|
||||
dev = dev_find_slot(0, PCI_DEVFN(0x02,1));
|
||||
dev = dev_find_slot(1, PCI_DEVFN(0x02,1));
|
||||
if (dev) {
|
||||
base = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
|
||||
base &= PCI_BASE_ADDRESS_MEM_MASK;
|
||||
|
@ -150,43 +150,43 @@ void *smp_write_config_table(void *v, unsigned long * processor_map)
|
|||
|
||||
/* PCI Slot 1 */
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
|
||||
bus_8131_2, (1<<2)|0, 0x04, 0x1);
|
||||
bus_8131_2, (1<<2)|0, 0x02, 0x11);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
|
||||
bus_8131_2, (1<<2)|1, 0x04, 0x2);
|
||||
bus_8131_2, (1<<2)|1, 0x02, 0x12);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
|
||||
bus_8131_2, (1<<2)|2, 0x04, 0x3);
|
||||
bus_8131_2, (1<<2)|2, 0x02, 0x13);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
|
||||
bus_8131_2, (1<<2)|3, 0x04, 0x0);
|
||||
bus_8131_2, (1<<2)|3, 0x02, 0x10);
|
||||
|
||||
/* PCI Slot 2 */
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
|
||||
bus_8131_2, (2<<2)|0, 0x04, 0x2);
|
||||
bus_8131_2, (2<<2)|0, 0x02, 0x12);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
|
||||
bus_8131_2, (2<<2)|1, 0x04, 0x3);
|
||||
bus_8131_2, (2<<2)|1, 0x02, 0x13);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
|
||||
bus_8131_2, (2<<2)|2, 0x04, 0x0);
|
||||
bus_8131_2, (2<<2)|2, 0x02, 0x10);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
|
||||
bus_8131_2, (2<<2)|3, 0x04, 0x1);
|
||||
bus_8131_2, (2<<2)|3, 0x02, 0x11);
|
||||
|
||||
/* PCI Slot 3 */
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
|
||||
bus_8131_1, (1<<2)|0, 0x03, 0x1);
|
||||
bus_8131_1, (1<<2)|0, 0x02, 0x11);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
|
||||
bus_8131_1, (1<<2)|1, 0x03, 0x2);
|
||||
bus_8131_1, (1<<2)|1, 0x02, 0x12);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
|
||||
bus_8131_1, (1<<2)|2, 0x03, 0x3);
|
||||
bus_8131_1, (1<<2)|2, 0x02, 0x13);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
|
||||
bus_8131_1, (1<<2)|3, 0x03, 0x0);
|
||||
bus_8131_1, (1<<2)|3, 0x02, 0x10);
|
||||
|
||||
/* PCI Slot 4 */
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
|
||||
bus_8131_1, (2<<2)|0, 0x03, 0x2);
|
||||
bus_8131_1, (2<<2)|0, 0x02, 0x12);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
|
||||
bus_8131_1, (2<<2)|1, 0x03, 0x3);
|
||||
bus_8131_1, (2<<2)|1, 0x02, 0x13);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
|
||||
bus_8131_1, (2<<2)|2, 0x03, 0x0);
|
||||
bus_8131_1, (2<<2)|2, 0x02, 0x10);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
|
||||
bus_8131_1, (2<<2)|3, 0x03, 0x1);
|
||||
bus_8131_1, (2<<2)|3, 0x02, 0x11);
|
||||
|
||||
/* PCI Slot 5 */
|
||||
#warning "FIXME get the irqs right, it's just hacked to work for now"
|
||||
|
|
|
@ -34,10 +34,10 @@ static void setup_quartet_resource_map(void)
|
|||
* This field defines the upper address bits of a 40 bit address
|
||||
* that define the end of the DRAM region.
|
||||
*/
|
||||
PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00f00000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x01f00001,
|
||||
PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x02f00002,
|
||||
PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x03f00003,
|
||||
PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x000f0000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x001f0001,
|
||||
PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x002f0002,
|
||||
PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x003f0003,
|
||||
PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
|
||||
PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
|
||||
PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
|
||||
|
@ -256,7 +256,7 @@ static void setup_quartet_resource_map(void)
|
|||
PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000203,
|
||||
PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0xff080113,
|
||||
PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0xffff0040,
|
||||
PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0xffff0330,
|
||||
PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0xffff0270,
|
||||
};
|
||||
int max;
|
||||
max = sizeof(register_values)/sizeof(register_values[0]);
|
||||
|
|
Loading…
Reference in New Issue