qcom: Add i2c driver

Add i2c driver in coreboot.

Change-Id: I3d39d0325718fc5dd60da42eb2b87dcc4429bfc2
Signed-off-by: Prudhvi Yarlagadda <pyarlaga@codeaurora.org>
Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This commit is contained in:
Prudhvi Yarlagadda 2019-04-15 21:32:12 +05:30 committed by Patrick Georgi
parent 4e0ec59255
commit 58ed173a2c
4 changed files with 867 additions and 0 deletions

View File

@ -8,6 +8,9 @@ bootblock-y += spi.c
bootblock-y += mmu.c
bootblock-y += gpio.c
bootblock-y += clock.c
bootblock-y += i2c.c
bootblock-y += qup.c
bootblock-y += blsp.c
bootblock-$(CONFIG_DRIVERS_UART) += uart.c
################################################################################
@ -15,6 +18,9 @@ verstage-y += timer.c
verstage-y += spi.c
verstage-y += gpio.c
verstage-y += clock.c
verstage-y += i2c.c
verstage-y += qup.c
verstage-y += blsp.c
verstage-$(CONFIG_DRIVERS_UART) += uart.c
################################################################################
@ -25,6 +31,9 @@ romstage-y += gpio.c
romstage-y += clock.c
romstage-y += usb.c
romstage-$(CONFIG_DRIVERS_UART) += uart.c
romstage-y += i2c.c
romstage-y += qup.c
romstage-y += blsp.c
################################################################################
ramstage-y += soc.c
@ -33,6 +42,9 @@ ramstage-y += spi.c
ramstage-y += cbmem.c
ramstage-y += gpio.c
ramstage-y += clock.c
ramstage-y += i2c.c
ramstage-y += qup.c
ramstage-y += blsp.c
ramstage-y += usb.c
ramstage-$(CONFIG_DRIVERS_UART) += uart.c

View File

@ -0,0 +1,65 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2014 - 2016, 2019 The Linux Foundation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* * Neither the name of The Linux Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <device/mmio.h>
#include <soc/blsp.h>
#include <soc/gpio.h>
#include <soc/iomap.h>
#include <soc/clock.h>
blsp_return_t blsp_i2c_init(blsp_qup_id_t id)
{
void *base;
switch (id) {
case BLSP_QUP_ID_1:
gpio_configure
(GPIO(24), 2, GPIO_PULL_UP, GPIO_2MA, GPIO_OUTPUT);
gpio_configure
(GPIO(25), 2, GPIO_PULL_UP, GPIO_2MA, GPIO_OUTPUT);
break;
default:
return BLSP_ID_ERROR;
}
clock_configure_i2c(19200000);
clock_enable_i2c();
base = blsp_qup_base(id);
if (!base)
return BLSP_ID_ERROR;
/* Configure Mini core to I2C core */
clrsetbits_le32(base, BLSP_MINI_CORE_MASK, BLSP_MINI_CORE_I2C);
return BLSP_SUCCESS;
}

View File

@ -0,0 +1,181 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2014 - 2015, 2019 The Linux Foundation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* * Neither the name of The Linux Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <assert.h>
#include <console/console.h>
#include <delay.h>
#include <device/i2c_simple.h>
#include <stdlib.h>
#include <string.h>
#include <soc/blsp.h>
#include <soc/qup.h>
#include <soc/gpio.h>
static qup_config_t blsp1_qup0_config = {
QUP_MINICORE_I2C_MASTER,
400000,
19200000,
QUP_MODE_BLOCK,
0
};
static qup_config_t blsp1_qup1_config = {
QUP_MINICORE_I2C_MASTER,
400000,
19200000,
QUP_MODE_BLOCK,
0
};
static qup_config_t blsp1_qup2_config = {
QUP_MINICORE_I2C_MASTER,
400000,
19200000,
QUP_MODE_BLOCK,
0
};
static qup_config_t blsp1_qup3_config = {
QUP_MINICORE_I2C_MASTER,
400000,
19200000,
QUP_MODE_BLOCK,
0
};
static int i2c_read(uint32_t gsbi_id, uint8_t slave,
uint8_t *data, int data_len)
{
qup_data_t obj;
qup_return_t qup_ret = 0;
memset(&obj, 0, sizeof(obj));
obj.protocol = QUP_MINICORE_I2C_MASTER;
obj.p.iic.addr = slave;
obj.p.iic.data_len = data_len;
obj.p.iic.data = data;
qup_ret = qup_recv_data(gsbi_id, &obj);
if (qup_ret != QUP_SUCCESS)
return 1;
else
return 0;
}
static int i2c_write(uint32_t gsbi_id, uint8_t slave,
uint8_t *data, int data_len, uint8_t stop_seq)
{
qup_data_t obj;
qup_return_t qup_ret = 0;
memset(&obj, 0, sizeof(obj));
obj.protocol = QUP_MINICORE_I2C_MASTER;
obj.p.iic.addr = slave;
obj.p.iic.data_len = data_len;
obj.p.iic.data = data;
qup_ret = qup_send_data(gsbi_id, &obj, stop_seq);
if (qup_ret != QUP_SUCCESS)
return 1;
else
return 0;
}
static int i2c_init(blsp_qup_id_t id)
{
qup_config_t *qup_config;
switch (id) {
case BLSP_QUP_ID_0:
qup_config = &blsp1_qup0_config;
break;
case BLSP_QUP_ID_1:
qup_config = &blsp1_qup1_config;
break;
case BLSP_QUP_ID_2:
qup_config = &blsp1_qup2_config;
break;
case BLSP_QUP_ID_3:
qup_config = &blsp1_qup3_config;
break;
default:
printk(BIOS_ERR, "QUP configuration not defined for BLSP%d.\n",
id);
return 1;
}
if (qup_config->initialized)
return 0;
if (blsp_i2c_init(id)) {
printk(BIOS_ERR, "failed to initialize blsp\n");
return 1;
}
if (qup_init(id, qup_config)) {
printk(BIOS_ERR, "failed to initialize qup\n");
return 1;
}
if (qup_reset_i2c_master_status(id)) {
printk(BIOS_ERR, "failed to reset i2c master status\n");
return 1;
}
qup_config->initialized = 1;
return 0;
}
int platform_i2c_transfer(unsigned int bus, struct i2c_msg *segments,
int seg_count)
{
struct i2c_msg *seg = segments;
int ret = 0;
if (i2c_init(bus))
return 1;
while (!ret && seg_count--) {
if (seg->flags & I2C_M_RD)
ret = i2c_read(bus, seg->slave, seg->buf, seg->len);
else
ret = i2c_write(bus, seg->slave, seg->buf, seg->len,
(seg_count ? 0 : 1));
seg++;
}
if (ret) {
qup_set_state(bus, QUP_STATE_RESET);
return 1;
}
return 0;
}

View File

@ -0,0 +1,609 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2014 - 2015, 2019 The Linux Foundation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* * Neither the name of The Linux Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <device/mmio.h>
#include <console/console.h>
#include <delay.h>
#include <soc/gpio.h>
#include <soc/iomap.h>
#include <stdlib.h>
#include <soc/qup.h>
#define TIMEOUT_CNT 100
#define QUP_ADDR(id, reg) (blsp_qup_base(id) + (reg))
#define QUP_DEBUG 0
#define QUPDBG BIOS_ERR, "\t-> "
#if QUP_DEBUG
#define qup_write32(a, v) do { \
write32(a, v); \
printk(QUPDBG "%s(%d): write32(0x%p, 0x%x)\n", \
__func__, __LINE__, a, v); \
} while (0)
#else
#define qup_write32 write32
#endif
struct i2c_clk_div_fld {
u32 clk_freq_out;
u8 fs_div;
u8 ht_div;
};
static struct i2c_clk_div_fld i2c_clk_div_map[] = {
{100000, 124, 62},
{400000, 28, 14},
{1000000, 8, 5},
};
static void i2c_set_mstr_clk_ctl(unsigned int id, unsigned int hz)
{
int i;
struct i2c_clk_div_fld *itr = i2c_clk_div_map;
u8 fs_div = 0;
u8 ht_div = 0;
u32 mstr_clk_ctl;
for (i = 0; i < ARRAY_SIZE(i2c_clk_div_map); ++i, ++itr) {
if (hz == itr->clk_freq_out) {
if (!fs_div)
fs_div = itr->fs_div;
if (!ht_div)
ht_div = itr->ht_div;
break;
}
}
/* format values in clk-ctl cache */
mstr_clk_ctl = ((ht_div & 0xff) << 16) | (fs_div & 0xff);
qup_write32(QUP_ADDR(id, QUP_I2C_MASTER_CLK_CTL), mstr_clk_ctl);
}
static qup_return_t qup_i2c_master_status(blsp_qup_id_t id)
{
uint32_t reg_val = read32(QUP_ADDR(id, QUP_I2C_MASTER_STATUS));
if (read32(QUP_ADDR(id, QUP_ERROR_FLAGS)))
return QUP_ERR_XFER_FAIL;
#if QUP_DEBUG
printk(QUPDBG "%s: 0x%x\n", __func__, reg_val);
#endif
if (reg_val & QUP_I2C_INVALID_READ_ADDR)
return QUP_ERR_I2C_INVALID_SLAVE_ADDR;
if (reg_val & QUP_I2C_FAILED_MASK)
return QUP_ERR_I2C_FAILED;
if (reg_val & QUP_I2C_ARB_LOST)
return QUP_ERR_I2C_ARB_LOST;
if (reg_val & QUP_I2C_BUS_ERROR)
return QUP_ERR_I2C_BUS_ERROR;
if (reg_val & QUP_I2C_INVALID_WRITE)
return QUP_ERR_I2C_INVALID_WRITE;
if (reg_val & QUP_I2C_PACKET_NACK)
return QUP_ERR_I2C_NACK;
if (reg_val & QUP_I2C_INVALID_TAG)
return QUP_ERR_I2C_INVALID_TAG;
return QUP_SUCCESS;
}
static int check_bit_state(uint32_t *reg, int wait_for)
{
unsigned int count = TIMEOUT_CNT;
while ((read32(reg) & (QUP_STATE_VALID_MASK | QUP_STATE_MASK)) !=
(QUP_STATE_VALID | wait_for)) {
if (count == 0)
return QUP_ERR_TIMEOUT;
count--;
}
return QUP_SUCCESS;
}
/*
* Check whether GSBIn_QUP State is valid
*/
static qup_return_t qup_wait_for_state(blsp_qup_id_t id, unsigned int wait_for)
{
return check_bit_state(QUP_ADDR(id, QUP_STATE), wait_for);
}
qup_return_t qup_reset_i2c_master_status(blsp_qup_id_t id)
{
/*
* The I2C_STATUS is a status register.
* Writing any value clears the status bits.
*/
qup_write32(QUP_ADDR(id, QUP_I2C_MASTER_STATUS), 0);
return QUP_SUCCESS;
}
static qup_return_t qup_reset_master_status(blsp_qup_id_t id)
{
qup_write32(QUP_ADDR(id, QUP_ERROR_FLAGS), 0x3C);
qup_write32(QUP_ADDR(id, QUP_ERROR_FLAGS_EN), 0x3C);
qup_reset_i2c_master_status(id);
return QUP_SUCCESS;
}
static qup_return_t qup_fifo_wait_for(blsp_qup_id_t id, uint32_t status)
{
qup_return_t ret = QUP_ERR_UNDEFINED;
unsigned int count = TIMEOUT_CNT;
while (!(read32(QUP_ADDR(id, QUP_OPERATIONAL)) & status)) {
ret = qup_i2c_master_status(id);
if (ret)
return ret;
if (count == 0)
return QUP_ERR_TIMEOUT;
count--;
}
return QUP_SUCCESS;
}
static qup_return_t qup_fifo_wait_while(blsp_qup_id_t id, uint32_t status)
{
qup_return_t ret = QUP_ERR_UNDEFINED;
unsigned int count = TIMEOUT_CNT;
while (read32(QUP_ADDR(id, QUP_OPERATIONAL)) & status) {
ret = qup_i2c_master_status(id);
if (ret)
return ret;
if (count == 0)
return QUP_ERR_TIMEOUT;
count--;
}
return QUP_SUCCESS;
}
static inline uint32_t qup_i2c_create_output_tag(int stop, u8 data)
{
uint32_t tag;
if (stop)
tag = QUP_I2C_STOP_SEQ | QUP_I2C_DATA(data);
else
tag = QUP_I2C_DATA_SEQ | QUP_I2C_DATA(data);
return tag;
}
static inline qup_return_t qup_i2c_write_fifo_flush(blsp_qup_id_t id)
{
qup_return_t ret = QUP_ERR_UNDEFINED;
qup_write32(QUP_ADDR(id, QUP_OPERATIONAL), OUTPUT_SERVICE_FLAG);
mdelay(4); /* TPM seems to need this */
ret = qup_fifo_wait_while(id, OUTPUT_FIFO_NOT_EMPTY);
if (ret)
return ret;
ret = qup_i2c_master_status(id);
if (ret)
printk(BIOS_DEBUG, "%s: error\n", __func__);
return ret;
}
static qup_return_t qup_i2c_write_fifo(blsp_qup_id_t id, qup_data_t *p_tx_obj,
uint8_t stop_seq)
{
qup_return_t ret = QUP_ERR_UNDEFINED;
uint8_t addr = p_tx_obj->p.iic.addr;
uint8_t *data_ptr = p_tx_obj->p.iic.data;
unsigned int data_len = p_tx_obj->p.iic.data_len;
unsigned int idx = 0;
uint32_t tag, *fifo = QUP_ADDR(id, QUP_OUTPUT_FIFO);
qup_reset_master_status(id);
qup_write32(QUP_ADDR(id, QUP_MX_OUTPUT_COUNT), data_len + 1);
qup_set_state(id, QUP_STATE_RUN);
/*
* Since UNPACK enable is set in io mode register, populate 2 tags
* for each fifo register.
*
* Create the first tag as follows, with the start tag and first byte
* of the data to be written
* +--------+--------+--------+--------+
* | STOP / | data | START | ADDR |
* |DATA tag| byte | tag | << 1 |
* +--------+--------+--------+--------+
* rest will be created in the following while loop.
*/
tag = qup_i2c_create_output_tag(data_len == 1 && stop_seq,
data_ptr[idx]);
tag = ((tag << 16) & 0xffff0000) |
(QUP_I2C_START_SEQ | QUP_I2C_ADDR(addr));
data_len--;
idx++;
qup_write32(fifo, tag);
while (data_len) {
tag = qup_i2c_create_output_tag(data_len == 1 && stop_seq,
data_ptr[idx]);
data_len--;
idx++;
if (data_len) {
tag |= qup_i2c_create_output_tag(
data_len == 1 && stop_seq,
data_ptr[idx]) << 16;
data_len--;
idx++;
}
qup_write32(fifo, tag);
ret = qup_i2c_write_fifo_flush(id);
if (ret) {
printk(QUPDBG "%s: error\n", __func__);
return ret;
}
}
ret = qup_i2c_write_fifo_flush(id);
qup_set_state(id, QUP_STATE_RESET);
return ret;
}
static qup_return_t qup_i2c_write(blsp_qup_id_t id, uint8_t mode,
qup_data_t *p_tx_obj, uint8_t stop_seq)
{
qup_return_t ret = QUP_ERR_UNDEFINED;
switch (mode) {
case QUP_MODE_FIFO:
case QUP_MODE_BLOCK:
ret = qup_i2c_write_fifo(id, p_tx_obj, stop_seq);
break;
default:
ret = QUP_ERR_UNSUPPORTED;
}
if (ret) {
qup_set_state(id, QUP_STATE_RESET);
printk(QUPDBG "%s() failed (%d)\n", __func__, ret);
}
return ret;
}
static int qup_i2c_parse_tag(uint32_t data, uint8_t *data_ptr, uint32_t len)
{
int i, idx = 0;
int max = (len > 2) ? 2 : len;
for (i = 0; i < max; i++) {
switch (QUP_I2C_MI_TAG(data)) {
case QUP_I2C_MIDATA_SEQ:
data_ptr[idx] = QUP_I2C_DATA(data);
idx++;
break;
case QUP_I2C_MISTOP_SEQ:
data_ptr[idx] = QUP_I2C_DATA(data);
idx++;
return idx;
default:
printk(QUPDBG "%s: Unexpected tag (0x%x)\n", __func__,
QUP_I2C_MI_TAG(data));
return -1;
}
data = (data >> 16);
}
return idx;
}
static qup_return_t qup_i2c_read_fifo(blsp_qup_id_t id, qup_data_t *p_tx_obj)
{
qup_return_t ret = QUP_ERR_UNDEFINED;
uint8_t addr = p_tx_obj->p.iic.addr;
uint8_t *data_ptr = p_tx_obj->p.iic.data;
unsigned int data_len = p_tx_obj->p.iic.data_len;
unsigned int idx = 0;
uint32_t *fifo = QUP_ADDR(id, QUP_OUTPUT_FIFO);
qup_reset_master_status(id);
qup_write32(QUP_ADDR(id, QUP_IO_MODES),
QUP_UNPACK_EN | QUP_PACK_EN |
((QUP_MODE_BLOCK & QUP_MODE_MASK) <<
QUP_OUTPUT_MODE_SHFT) |
((QUP_MODE_BLOCK & QUP_MODE_MASK) <<
QUP_INPUT_MODE_SHFT));
qup_write32(QUP_ADDR(id, QUP_MX_INPUT_COUNT), data_len);
qup_set_state(id, QUP_STATE_RUN);
qup_write32(fifo, (QUP_I2C_START_SEQ |
(QUP_I2C_ADDR(addr) | QUP_I2C_SLAVE_READ)) |
((QUP_I2C_RECV_SEQ | data_len) << 16));
ret = qup_i2c_write_fifo_flush(id);
if (ret) {
printk(QUPDBG "%s: OUTPUT_FIFO_NOT_EMPTY\n", __func__);
return ret;
}
ret = qup_fifo_wait_for(id, INPUT_SERVICE_FLAG);
if (ret) {
printk(QUPDBG "%s: INPUT_SERVICE_FLAG\n", __func__);
return ret;
}
fifo = QUP_ADDR(id, QUP_INPUT_FIFO);
while (data_len) {
uint32_t data;
int count;
data = read32(fifo);
mdelay(1);
count = qup_i2c_parse_tag(data, data_ptr + idx, data_len);
if (count < 0) {
printk(QUPDBG "%s: Cannot parse tag 0x%x\n",
__func__, data);
qup_set_state(id, QUP_STATE_PAUSE);
return QUP_ERR_I2C_INVALID_TAG;
}
idx += count;
data_len -= count;
qup_write32(QUP_ADDR(id, QUP_OPERATIONAL), INPUT_SERVICE_FLAG);
}
p_tx_obj->p.iic.data_len = idx;
qup_write32(QUP_ADDR(id, QUP_MX_READ_COUNT), 0);
qup_set_state(id, QUP_STATE_RESET);
return QUP_SUCCESS;
}
static qup_return_t qup_i2c_read(blsp_qup_id_t id, uint8_t mode,
qup_data_t *p_tx_obj)
{
qup_return_t ret = QUP_ERR_UNDEFINED;
qup_set_state(id, QUP_STATE_RESET);
switch (mode) {
case QUP_MODE_FIFO:
case QUP_MODE_BLOCK:
ret = qup_i2c_read_fifo(id, p_tx_obj);
break;
default:
ret = QUP_ERR_UNSUPPORTED;
}
if (ret) {
qup_set_state(id, QUP_STATE_RESET);
printk(QUPDBG "%s() failed (%d)\n", __func__, ret);
}
return ret;
}
qup_return_t qup_init(blsp_qup_id_t id, const qup_config_t *config_ptr)
{
qup_return_t ret = QUP_ERR_UNDEFINED;
uint32_t reg_val;
/* Reset the QUP core.*/
qup_write32(QUP_ADDR(id, QUP_SW_RESET), 0x1);
/* Wait till the reset takes effect */
ret = qup_wait_for_state(id, QUP_STATE_RESET);
if (ret)
goto bailout;
/* Reset the config */
qup_write32(QUP_ADDR(id, QUP_CONFIG), 0);
/* Program the config register */
/* Set N value */
reg_val = 0x0F;
/* Set protocol */
switch (config_ptr->protocol) {
case QUP_MINICORE_I2C_MASTER:
reg_val |= ((config_ptr->protocol &
QUP_MINI_CORE_PROTO_MASK) <<
QUP_MINI_CORE_PROTO_SHFT);
break;
default:
ret = QUP_ERR_UNSUPPORTED;
goto bailout;
}
reg_val |= QUP_APP_CLK_ON_EN | QUP_CORE_CLK_ON_EN;
qup_write32(QUP_ADDR(id, QUP_CONFIG), reg_val);
/* Choose version 1 tag */
qup_write32(QUP_ADDR(id, QUP_I2C_MASTER_CONFIG), 0);
/* Reset i2c clk cntl register */
qup_write32(QUP_ADDR(id, QUP_I2C_MASTER_CLK_CTL), 0);
/* Set QUP IO Mode */
switch (config_ptr->mode) {
case QUP_MODE_FIFO:
case QUP_MODE_BLOCK:
reg_val = QUP_UNPACK_EN | QUP_PACK_EN |
((config_ptr->mode & QUP_MODE_MASK) <<
QUP_OUTPUT_MODE_SHFT) |
((config_ptr->mode & QUP_MODE_MASK) <<
QUP_INPUT_MODE_SHFT);
break;
default:
ret = QUP_ERR_UNSUPPORTED;
goto bailout;
}
qup_write32(QUP_ADDR(id, QUP_IO_MODES), reg_val);
/*Set i2c clk cntl*/
i2c_set_mstr_clk_ctl(id, 400000);
qup_set_state(id, QUP_STATE_RESET);
bailout:
if (ret)
printk(QUPDBG "failed to init qup (%d)\n", ret);
return ret;
}
qup_return_t qup_set_state(blsp_qup_id_t id, uint32_t state)
{
qup_return_t ret = QUP_ERR_UNDEFINED;
unsigned int curr_state = read32(QUP_ADDR(id, QUP_STATE));
if ((state <= QUP_STATE_PAUSE)
&& (curr_state & QUP_STATE_VALID_MASK)) {
/*
* For PAUSE_STATE to RESET_STATE transition,
* two writes of 10[binary]) are required for the
* transition to complete.
*/
if (curr_state == QUP_STATE_PAUSE && state == QUP_STATE_RESET) {
qup_write32(QUP_ADDR(id, QUP_STATE), 0x2);
qup_write32(QUP_ADDR(id, QUP_STATE), 0x2);
} else {
qup_write32(QUP_ADDR(id, QUP_STATE), state);
}
ret = qup_wait_for_state(id, state);
}
return ret;
}
static qup_return_t qup_i2c_send_data(blsp_qup_id_t id, qup_data_t *p_tx_obj,
uint8_t stop_seq)
{
qup_return_t ret = QUP_ERR_UNDEFINED;
uint8_t mode = (read32(QUP_ADDR(id, QUP_IO_MODES)) >>
QUP_OUTPUT_MODE_SHFT) & QUP_MODE_MASK;
ret = qup_i2c_write(id, mode, p_tx_obj, stop_seq);
if (QUP_DEBUG) {
int i;
printk(BIOS_DEBUG, "i2c tx bus %d device %2.2x:",
id, p_tx_obj->p.iic.addr);
for (i = 0; i < p_tx_obj->p.iic.data_len; i++)
printk(BIOS_DEBUG, " %2.2x", p_tx_obj->p.iic.data[i]);
printk(BIOS_DEBUG, "\n");
}
return ret;
}
qup_return_t qup_send_data(blsp_qup_id_t id, qup_data_t *p_tx_obj,
uint8_t stop_seq)
{
qup_return_t ret = QUP_ERR_UNDEFINED;
if (p_tx_obj->protocol == ((read32(QUP_ADDR(id, QUP_CONFIG)) >>
QUP_MINI_CORE_PROTO_SHFT) & QUP_MINI_CORE_PROTO_MASK)) {
switch (p_tx_obj->protocol) {
case QUP_MINICORE_I2C_MASTER:
ret = qup_i2c_send_data(id, p_tx_obj, stop_seq);
break;
default:
ret = QUP_ERR_UNSUPPORTED;
}
}
return ret;
}
static qup_return_t qup_i2c_recv_data(blsp_qup_id_t id, qup_data_t *p_rx_obj)
{
qup_return_t ret = QUP_ERR_UNDEFINED;
uint8_t mode = (read32(QUP_ADDR(id, QUP_IO_MODES)) >>
QUP_INPUT_MODE_SHFT) & QUP_MODE_MASK;
ret = qup_i2c_read(id, mode, p_rx_obj);
if (QUP_DEBUG) {
int i;
printk(BIOS_DEBUG, "i2c rxed on bus %d device %2.2x:",
id, p_rx_obj->p.iic.addr);
for (i = 0; i < p_rx_obj->p.iic.data_len; i++)
printk(BIOS_DEBUG, " %2.2x", p_rx_obj->p.iic.data[i]);
printk(BIOS_DEBUG, "\n");
}
return ret;
}
qup_return_t qup_recv_data(blsp_qup_id_t id, qup_data_t *p_rx_obj)
{
qup_return_t ret = QUP_ERR_UNDEFINED;
if (p_rx_obj->protocol == ((read32(QUP_ADDR(id, QUP_CONFIG)) >>
QUP_MINI_CORE_PROTO_SHFT) & QUP_MINI_CORE_PROTO_MASK)) {
switch (p_rx_obj->protocol) {
case QUP_MINICORE_I2C_MASTER:
ret = qup_i2c_recv_data(id, p_rx_obj);
break;
default:
ret = QUP_ERR_UNSUPPORTED;
}
}
return ret;
}