nb/gm45/gma.c: Remove writes to DP, FDI registers
Those registers are only used on more recent Intel platforms featuring a PCH. The DP registers on G4X hardware are at a different offset. Change-Id: Ib49e54d4e7d6595dc09fb1be35ac8178b80c7f71 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17110 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
This commit is contained in:
parent
04be6b5949
commit
606b8bccb5
|
@ -4,7 +4,6 @@ chip northbridge/intel/gm45
|
|||
register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }"
|
||||
|
||||
register "gfx.use_spread_spectrum_clock" = "1"
|
||||
register "gfx.link_frequency_270_mhz" = "1"
|
||||
|
||||
device cpu_cluster 0 on
|
||||
chip cpu/intel/socket_BGA956
|
||||
|
|
|
@ -9,7 +9,6 @@ chip northbridge/intel/gm45
|
|||
register "gpu_panel_power_backlight_off_delay" = "2500" # Tx: 250ms
|
||||
register "gpu_panel_power_cycle_delay" = "3" # T4: 200ms
|
||||
register "gfx.use_spread_spectrum_clock" = "1"
|
||||
register "gfx.link_frequency_270_mhz" = "1"
|
||||
|
||||
device cpu_cluster 0 on
|
||||
chip cpu/intel/socket_BGA956
|
||||
|
|
|
@ -68,11 +68,6 @@ static void gma_init_lvds(const struct northbridge_intel_gm45_config *info,
|
|||
u32 pixel_m1 = 1;
|
||||
u32 pixel_m2 = 1;
|
||||
u32 pixel_p2;
|
||||
u32 link_frequency = info->gfx.link_frequency_270_mhz ? 270000 : 162000;
|
||||
u32 data_m1;
|
||||
u32 data_n1 = 0x00800000;
|
||||
u32 link_m1;
|
||||
u32 link_n1 = 0x00080000;
|
||||
|
||||
vga_gr_write(0x18, 0);
|
||||
|
||||
|
@ -190,10 +185,6 @@ static void gma_init_lvds(const struct northbridge_intel_gm45_config *info,
|
|||
return;
|
||||
}
|
||||
|
||||
link_m1 = ((uint64_t)link_n1 * mode->pixel_clock) / link_frequency;
|
||||
data_m1 = ((uint64_t)data_n1 * 18 * mode->pixel_clock)
|
||||
/ (link_frequency * 8 * 4);
|
||||
|
||||
printk(BIOS_INFO, "bringing up panel at resolution %d x %d\n",
|
||||
hactive, vactive);
|
||||
printk(BIOS_DEBUG, "Borders %d x %d\n",
|
||||
|
@ -210,12 +201,6 @@ static void gma_init_lvds(const struct northbridge_intel_gm45_config *info,
|
|||
mode->lvds_dual_channel ? "Dual channel\n" : "Single channel\n");
|
||||
printk(BIOS_DEBUG, "Polarities %d, %d\n",
|
||||
hpolarity, vpolarity);
|
||||
printk(BIOS_DEBUG, "Data M1=%d, N1=%d\n",
|
||||
data_m1, data_n1);
|
||||
printk(BIOS_DEBUG, "Link frequency %d kHz\n",
|
||||
link_frequency);
|
||||
printk(BIOS_DEBUG, "Link M1=%d, N1=%d\n",
|
||||
link_m1, link_n1);
|
||||
printk(BIOS_DEBUG, "Pixel N=%d, M1=%d, M2=%d, P1=%d\n",
|
||||
pixel_n, pixel_m1, pixel_m2, pixel_p1);
|
||||
printk(BIOS_DEBUG, "Pixel clock %d kHz\n",
|
||||
|
@ -298,13 +283,6 @@ static void gma_init_lvds(const struct northbridge_intel_gm45_config *info,
|
|||
write32(mmio + PFIT_CONTROL, 0x80000000);
|
||||
}
|
||||
|
||||
mdelay(1);
|
||||
|
||||
write32(mmio + PIPE_DATA_M1(0), 0x7e000000 | data_m1);
|
||||
write32(mmio + PIPE_DATA_N1(0), data_n1);
|
||||
write32(mmio + PIPE_LINK_M1(0), link_m1);
|
||||
write32(mmio + PIPE_LINK_N1(0), link_n1);
|
||||
|
||||
mdelay(1);
|
||||
write32(mmio + PIPECONF(0), PIPECONF_BPP_6);
|
||||
write32(mmio + PIPECONF(0), PIPECONF_BPP_6 | PIPECONF_DITHER_EN);
|
||||
|
@ -361,12 +339,6 @@ static void gma_init_vga(const struct northbridge_intel_gm45_config *info,
|
|||
u32 pixel_n = 1;
|
||||
u32 pixel_m1 = 1;
|
||||
u32 pixel_m2 = 1;
|
||||
u32 link_frequency = info->gfx.link_frequency_270_mhz ? 270000 : 162000;
|
||||
u32 data_m1;
|
||||
u32 data_n1 = 0x00800000;
|
||||
u32 link_m1;
|
||||
u32 link_n1 = 0x00040000;
|
||||
|
||||
|
||||
vga_gr_write(0x18, 0);
|
||||
|
||||
|
@ -491,10 +463,6 @@ static void gma_init_vga(const struct northbridge_intel_gm45_config *info,
|
|||
return;
|
||||
}
|
||||
|
||||
link_m1 = ((uint64_t)link_n1 * mode->pixel_clock) / link_frequency;
|
||||
data_m1 = ((uint64_t)data_n1 * 18 * mode->pixel_clock)
|
||||
/ (link_frequency * 8 * 4);
|
||||
|
||||
printk(BIOS_INFO, "Bringing up panel at resolution %d x %d\n",
|
||||
hactive, vactive);
|
||||
printk(BIOS_SPEW, "Borders %d x %d\n",
|
||||
|
@ -509,12 +477,6 @@ static void gma_init_vga(const struct northbridge_intel_gm45_config *info,
|
|||
? "Spread spectrum clock\n" : "DREF clock\n"));
|
||||
printk(BIOS_SPEW, "Polarities %d, %d\n",
|
||||
hpolarity, vpolarity);
|
||||
printk(BIOS_SPEW, "Data M1=%d, N1=%d\n",
|
||||
data_m1, data_n1);
|
||||
printk(BIOS_SPEW, "Link frequency %d kHz\n",
|
||||
link_frequency);
|
||||
printk(BIOS_SPEW, "Link M1=%d, N1=%d\n",
|
||||
link_m1, link_n1);
|
||||
printk(BIOS_SPEW, "Pixel N=%d, M1=%d, M2=%d, P1=%d, P2=%d\n",
|
||||
pixel_n, pixel_m1, pixel_m2, pixel_p1, pixel_p2);
|
||||
printk(BIOS_SPEW, "Pixel clock %d kHz\n",
|
||||
|
@ -585,13 +547,6 @@ static void gma_init_vga(const struct northbridge_intel_gm45_config *info,
|
|||
write32(mmio + PFIT_CONTROL, 0x80000000);
|
||||
}
|
||||
|
||||
mdelay(1);
|
||||
|
||||
write32(mmio + PIPE_DATA_M1(0), 0x7e000000 | data_m1);
|
||||
write32(mmio + PIPE_DATA_N1(0), data_n1);
|
||||
write32(mmio + PIPE_LINK_M1(0), link_m1);
|
||||
write32(mmio + PIPE_LINK_N1(0), link_n1);
|
||||
|
||||
mdelay(1);
|
||||
write32(mmio + PIPECONF(0), PIPECONF_BPP_6);
|
||||
write32(mmio + PIPECONF(0), PIPECONF_BPP_6 | PIPECONF_DITHER_EN);
|
||||
|
|
Loading…
Reference in New Issue