util/superiotool: Add AST2400

Add support for AST2400 Super I/O.

The device doesn't have an ID register, so probe for scratch register
not to read as 0xff.

Tested on platform which has an AST2400.

Change-Id: I86af69c6b2ccefe2c88eef875bc858239df834f1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>

util/superiotool/Makefile

@@ -29,7 +29,7 @@ CFLAGS += -O2 -Wall -Wstrict-prototypes -Wundef -Wstrict-aliasing \
 LDFLAGS += -lz
 
 OBJS = superiotool.o serverengines.o ali.o exar.o fintek.o ite.o nsc.o \
-       nuvoton.o smsc.o winbond.o infineon.o
+       nuvoton.o smsc.o winbond.o infineon.o aspeed.o
 
 OS_ARCH = $(shell uname)
 ifeq ($(OS_ARCH), Darwin)

util/superiotool/aspeed.c

@@ -0,0 +1,128 @@
+/*
+ * This file is part of the superiotool project.
+ *
+ * Copyright (C) 9elements Agency GmbH <patrick.rudolph@9elements.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "superiotool.h"
+
+#define DEVICE_SCRATCH_REG	0x21
+
+static const struct superio_registers reg_table[] = {
+	{0x00, "AST2400", {
+		{NOLDN, NULL,
+			{0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,
+			 0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f,EOT},
+			{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+			 0x00,0x00,0x00,0x00,0x00,0x00,0x00,EOT}},
+		{0x02, "SUART1",
+			{0x30,0x60,0x61,0x70,0x71,0xf0,EOT},
+			{0x00,0x03,0xf8,0x04,0x02,RSVD,EOT}},
+		{0x03, "SUART1",
+			{0x30,0x60,0x61,0x70,0x71,0xf0,EOT},
+			{0x00,0x02,0xf8,0x03,0x02,0x00,EOT}},
+		{0x04, "SWC",
+			{0x30,0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67,
+			 0x70,0x71,EOT},
+			{0x00,0x08,0xe6,0x08,0xe0,0x08,0xe4,0x08,0xe8,
+			 0x09,0x01,EOT}},
+		{0x05, "Keyboard config (KBC)",
+			{0x30,0x60,0x61,0x62,0x63,0x70,0x71,0x72,0x73,
+			 0xf0,EOT},
+			{0x00,0x00,0x60,0x00,0x64,0x01,0x02,0x0c,0x02,
+			 0x83,EOT}},
+		{0x07, "GPIO",
+			{0x30,0x38,0x70,0x71,EOT},
+			{0x00,0x00,0x0b,0x01,EOT}},
+		{0x0b, "SUART3",
+			{0x30,0x60,0x61,0x70,0x71,0xf0,EOT},
+			{0x00,0x03,0xe8,0x06,0x02,0x00,EOT}},
+		{0x0c, "SUART4",
+			{0x30,0x60,0x61,0x70,0x71,0xf0,EOT},
+			{0x00,0x02,0xe8,0x05,0x02,0x00,EOT}},
+		{0x0d, "iLPC2AHB",
+			{0x30,0x70,0x71,0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,
+			 0xf6,0xf7,0xf8,0xfe,EOT},
+			{0x00,0x09,0x01,NANA,NANA,NANA,NANA,NANA,NANA,
+			 NANA,NANA,0x00,0x00,EOT}},
+		{0x0e, "Mailbox",
+			{0x30,0x60,0x61,0x70,0x71,EOT},
+			{0x00,0x08,0xc0,0x09,0x01,EOT}},
+		{EOT}}},
+	{EOT}
+};
+
+static void enter_conf_mode_ast(uint16_t port)
+{
+	OUTB(0xa5, port);
+	OUTB(0xa5, port);
+}
+
+static void exit_conf_mode_ast(uint16_t port)
+{
+	OUTB(0xaa, port);
+}
+
+static int detect_ast_superio(uint16_t port)
+{
+	int i;
+	enter_conf_mode_ast(port);
+
+	/* Aspeed devices doesn't have a DEVICE_ID_REG.
+	 * Host cycles that aren't decoded read as 0xff.
+	 * Probe for the scratch register that are initialized to zero.
+	 * The firmware might overwrite that, but it's the best we have.
+	 */
+
+	for (i = DEVICE_SCRATCH_REG; i < 0x30; i++) {
+		if (regval(port, i) != 0xff)
+			break;
+	}
+	if (i == 0x30) {
+		if (verbose)
+			printf(NOTFOUND
+			       "scratch registers all read as 0xff\n");
+	}
+	exit_conf_mode_ast(port);
+
+	return i < 0x30;
+}
+
+void probe_idregs_aspeed(uint16_t port)
+{
+	uint16_t chip_id = 0;
+
+	probing_for("Aspeed", "", port);
+
+	if (!detect_ast_superio(port))
+		return;
+
+	if (superio_unknown(reg_table, chip_id)) {
+		if (verbose)
+			printf(NOTFOUND "id=0x%02x\n", chip_id);
+		return;
+	}
+
+	printf("Found Aspeed %s (id=0x%02x) at 0x%x\n",
+	       get_superio_name(reg_table, chip_id), chip_id, port);
+	chip_found = 1;
+
+	enter_conf_mode_ast(port);
+	dump_superio("Aspeed", reg_table, port, chip_id, LDN_SEL);
+	exit_conf_mode_ast(port);
+}
+
+void print_aspeed_chips(void)
+{
+	print_vendor_chips("Aspeed", reg_table);
+}

util/superiotool/superiotool.h

@@ -190,6 +190,10 @@ void print_vendor_chips(const char *vendor,
 void probe_idregs_ali(uint16_t port);
 void print_ali_chips(void);
 
+/* aspeed.c */
+void probe_idregs_aspeed(uint16_t port);
+void print_aspeed_chips(void);
+
 /* amd.c */
 void probe_idregs_amd(uint16_t port);
 void print_amd_chips(void);
@@ -243,6 +247,7 @@ static const struct {
 	int ports[MAXNUMPORTS]; /* Signed, as we need EOT. */
 } superio_ports_table[] = {
 	{probe_idregs_ali,	{0x3f0, 0x370, EOT}},
+        {probe_idregs_aspeed,   {0x2e, 0x4e, EOT}},
 	{probe_idregs_exar,	{0x2e, 0x4e, EOT}},
 	{probe_idregs_fintek,	{0x2e, 0x4e, EOT}},
 	{probe_idregs_fintek_alternative,	{0x2e, 0x4e, EOT}},
@@ -278,6 +283,7 @@ static const struct {
 #ifdef PCI_SUPPORT
 	{print_via_chips},
 	{print_amd_chips},
+	{print_aspeed_chips},
 #endif
 	{print_serverengines_chips},
 	{print_infineon_chips},