drivers/i2c: sx9310: Replace register map with descriptive names
The current driver is using chip registers map to configure the SAR sensor, which is opaque, especially when the datasheet is not published widely. Use more descriptive names, as defined in Linux kernel documentation at https://www.kernel.org/doc/Documentation/devicetree/bindings/iio/proximity/semtech%2Csx9310.yaml BUG=b:173341604 BRANCH=volteer TEST=Dump all tables, check semtech property: for i in $(find /sys/firmware/acpi/tables/ -type f) ; do f=$(basename $i); cat $i > /tmp/$f.dat ; iasl -d /tmp/$f.dat done In SSDT.dsl, we have: Package (0x06) { Package (0x02) { "semtech,cs0-ground", Zero }, Package (0x02) { "semtech,startup-sensor", Zero }, Package (0x02) { "semtech,proxraw-strength", Zero }, Package (0x02) { "semtech,avg-pos-strength", 0x0200 }, Package (0x02) { "semtech,combined-sensors", Package (0x03) { Zero, One, 0x02 } }, Package (0x02) { "semtech,resolution", "finest" } } Change-Id: I8d1c81b56eaeef1dbb0f73c1d74c3a20e8b2fd7b Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
This commit is contained in:
parent
e4a7e46a9c
commit
689c25b9d6
|
@ -6,7 +6,18 @@
|
|||
#include <acpi/acpi_device.h>
|
||||
#include <device/i2c_simple.h>
|
||||
|
||||
#define REGISTER(NAME) uint8_t NAME
|
||||
#define MAX_COMBINED_SENSORS_ENTRIES 4
|
||||
|
||||
enum sx9310_resolution {
|
||||
SX9310_COARSEST = 1,
|
||||
SX9310_VERY_COARSE,
|
||||
SX9310_COARSE,
|
||||
SX9310_MEDIUM_COARSE,
|
||||
SX9310_MEDIUM,
|
||||
SX9310_FINE,
|
||||
SX9310_VERY_FINE,
|
||||
SX9310_FINEST,
|
||||
};
|
||||
|
||||
struct drivers_i2c_sx9310_config {
|
||||
/* Device Description */
|
||||
|
@ -23,9 +34,34 @@ struct drivers_i2c_sx9310_config {
|
|||
|
||||
/* IO-APIC interrupt */
|
||||
struct acpi_irq irq;
|
||||
#include "registers.h"
|
||||
|
||||
/*
|
||||
* Registers definition in the kernel source tree at:
|
||||
* Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
|
||||
*/
|
||||
|
||||
/* When true, cs0 is the ground. 0 [default] is false. */
|
||||
uint32_t cs0_ground;
|
||||
|
||||
/* Sensor used for start-up proximity detection: Default 0. */
|
||||
uint32_t startup_sensor;
|
||||
|
||||
/* Raw Proximity filter strength: When not set, disabled. */
|
||||
uint32_t proxraw_strength;
|
||||
|
||||
/* Average Proximity filter strength: When not set, disabled. */
|
||||
uint32_t avg_pos_strength;
|
||||
|
||||
/*
|
||||
* List of which sensors are combined and represented by CS3.
|
||||
* Could be standalone (3) or combination of 0, 1, 2, 3.
|
||||
* Driver default: CS0 + CS1.
|
||||
*/
|
||||
uint32_t combined_sensors_count;
|
||||
uint32_t combined_sensors[MAX_COMBINED_SENSORS_ENTRIES];
|
||||
|
||||
/* Capacitance measure resolution. Driver default: "finest". */
|
||||
enum sx9310_resolution resolution;
|
||||
};
|
||||
|
||||
#undef REGISTER
|
||||
|
||||
#endif /* __DRIVERS_I2C_SX9310_CHIP_H__ */
|
||||
|
|
|
@ -1,29 +0,0 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-only */
|
||||
|
||||
#ifndef REGISTER
|
||||
#error "define REGISTER(NAME) before including this file"
|
||||
#endif
|
||||
|
||||
REGISTER(reg_prox_ctrl0);
|
||||
REGISTER(reg_prox_ctrl1);
|
||||
REGISTER(reg_prox_ctrl2);
|
||||
REGISTER(reg_prox_ctrl3);
|
||||
REGISTER(reg_prox_ctrl4);
|
||||
REGISTER(reg_prox_ctrl5);
|
||||
REGISTER(reg_prox_ctrl6);
|
||||
REGISTER(reg_prox_ctrl7);
|
||||
REGISTER(reg_prox_ctrl8);
|
||||
REGISTER(reg_prox_ctrl9);
|
||||
REGISTER(reg_prox_ctrl10);
|
||||
REGISTER(reg_prox_ctrl11);
|
||||
REGISTER(reg_prox_ctrl12);
|
||||
REGISTER(reg_prox_ctrl13);
|
||||
REGISTER(reg_prox_ctrl14);
|
||||
REGISTER(reg_prox_ctrl15);
|
||||
REGISTER(reg_prox_ctrl16);
|
||||
REGISTER(reg_prox_ctrl17);
|
||||
REGISTER(reg_prox_ctrl18);
|
||||
REGISTER(reg_prox_ctrl19);
|
||||
REGISTER(reg_sar_ctrl0);
|
||||
REGISTER(reg_sar_ctrl1);
|
||||
REGISTER(reg_sar_ctrl2);
|
|
@ -12,9 +12,16 @@
|
|||
#define I2C_SX9310_ACPI_ID "STH9310"
|
||||
#define I2C_SX9310_ACPI_NAME "Semtech SX9310"
|
||||
|
||||
#define REGISTER(NAME) acpi_dp_add_integer(dsd, \
|
||||
I2C_SX9310_ACPI_ID "," #NAME, \
|
||||
config->NAME)
|
||||
static const char * const i2c_sx9310_resolution[] = {
|
||||
[SX9310_COARSEST] = "coarsest",
|
||||
[SX9310_VERY_COARSE] = "very-coarse",
|
||||
[SX9310_COARSE] = "coarse",
|
||||
[SX9310_MEDIUM_COARSE] = "medium-coarse",
|
||||
[SX9310_MEDIUM] = "medium",
|
||||
[SX9310_FINE] = "fine",
|
||||
[SX9310_VERY_FINE] = "very-fine",
|
||||
[SX9310_FINEST] = "finest",
|
||||
};
|
||||
|
||||
static void i2c_sx9310_fill_ssdt(const struct device *dev)
|
||||
{
|
||||
|
@ -27,6 +34,7 @@ static void i2c_sx9310_fill_ssdt(const struct device *dev)
|
|||
.resource = scope,
|
||||
};
|
||||
struct acpi_dp *dsd;
|
||||
struct acpi_dp *combined_sensors;
|
||||
|
||||
if (!scope || !config)
|
||||
return;
|
||||
|
@ -56,9 +64,35 @@ static void i2c_sx9310_fill_ssdt(const struct device *dev)
|
|||
|
||||
/* DSD */
|
||||
dsd = acpi_dp_new_table("_DSD");
|
||||
#include "registers.h"
|
||||
acpi_dp_write(dsd);
|
||||
|
||||
/*
|
||||
* Format describe in linux kernel documentation. See
|
||||
* https://www.kernel.org/doc/Documentation/devicetree/bindings/iio/proximity/semtech%2Csx9310.yaml
|
||||
*/
|
||||
acpi_dp_add_integer(dsd, "semtech,cs0-ground", config->cs0_ground);
|
||||
acpi_dp_add_integer(dsd, "semtech,startup-sensor",
|
||||
config->startup_sensor);
|
||||
acpi_dp_add_integer(dsd, "semtech,proxraw-strength",
|
||||
config->proxraw_strength);
|
||||
acpi_dp_add_integer(dsd, "semtech,avg-pos-strength",
|
||||
config->avg_pos_strength);
|
||||
|
||||
/* Add combined_sensors package */
|
||||
if (config->combined_sensors_count > 0) {
|
||||
combined_sensors = acpi_dp_new_table("semtech,combined-sensors");
|
||||
for (int i = 0;
|
||||
i < config->combined_sensors_count &&
|
||||
i < MAX_COMBINED_SENSORS_ENTRIES; ++i) {
|
||||
acpi_dp_add_integer(combined_sensors, NULL,
|
||||
config->combined_sensors[i]);
|
||||
}
|
||||
acpi_dp_add_array(dsd, combined_sensors);
|
||||
}
|
||||
if (config->resolution && config->resolution < ARRAY_SIZE(i2c_sx9310_resolution))
|
||||
acpi_dp_add_string(dsd, "semtech,resolution",
|
||||
i2c_sx9310_resolution[config->resolution]);
|
||||
|
||||
acpi_dp_write(dsd);
|
||||
acpigen_pop_len(); /* Device */
|
||||
acpigen_pop_len(); /* Scope */
|
||||
|
||||
|
@ -66,8 +100,6 @@ static void i2c_sx9310_fill_ssdt(const struct device *dev)
|
|||
config->desc ? : dev->chip_ops->name, dev_path(dev));
|
||||
}
|
||||
|
||||
#undef REGISTER
|
||||
|
||||
static const char *i2c_sx9310_acpi_name(const struct device *dev)
|
||||
{
|
||||
static char name[5];
|
||||
|
|
|
@ -129,29 +129,15 @@ chip soc/intel/cannonlake
|
|||
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_A0)"
|
||||
register "speed" = "I2C_SPEED_FAST"
|
||||
register "uid" = "1"
|
||||
register "reg_prox_ctrl0" = "0x10"
|
||||
register "reg_prox_ctrl1" = "0x00"
|
||||
register "reg_prox_ctrl2" = "0x84"
|
||||
register "reg_prox_ctrl3" = "0x0e"
|
||||
register "reg_prox_ctrl4" = "0x07"
|
||||
register "reg_prox_ctrl5" = "0xc6"
|
||||
register "reg_prox_ctrl6" = "0x20"
|
||||
register "reg_prox_ctrl7" = "0x0d"
|
||||
register "reg_prox_ctrl8" = "0x8d"
|
||||
register "reg_prox_ctrl9" = "0x43"
|
||||
register "reg_prox_ctrl10" = "0x1f"
|
||||
register "reg_prox_ctrl11" = "0x00"
|
||||
register "reg_prox_ctrl12" = "0x00"
|
||||
register "reg_prox_ctrl13" = "0x00"
|
||||
register "reg_prox_ctrl14" = "0x00"
|
||||
register "reg_prox_ctrl15" = "0x00"
|
||||
register "reg_prox_ctrl16" = "0x00"
|
||||
register "reg_prox_ctrl17" = "0x00"
|
||||
register "reg_prox_ctrl18" = "0x00"
|
||||
register "reg_prox_ctrl19" = "0x00"
|
||||
register "reg_sar_ctrl0" = "0x50"
|
||||
register "reg_sar_ctrl1" = "0x8a"
|
||||
register "reg_sar_ctrl2" = "0x3c"
|
||||
register "cs0_ground" = "0x0"
|
||||
register "combined_sensors_count" = "3"
|
||||
register "combined_sensors[0]" = "0"
|
||||
register "combined_sensors[1]" = "1"
|
||||
register "combined_sensors[2]" = "2"
|
||||
register "resolution" = "SX9310_FINEST"
|
||||
register "avg_pos_strength" = "512"
|
||||
register "startup_sensor" = "0"
|
||||
register "proxraw_strength" = "0"
|
||||
device i2c 28 on end
|
||||
end
|
||||
end # I2C #3
|
||||
|
|
|
@ -149,29 +149,15 @@ chip soc/intel/cannonlake
|
|||
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_A0)"
|
||||
register "speed" = "I2C_SPEED_FAST"
|
||||
register "uid" = "1"
|
||||
register "reg_prox_ctrl0" = "0x10"
|
||||
register "reg_prox_ctrl1" = "0x00"
|
||||
register "reg_prox_ctrl2" = "0x84"
|
||||
register "reg_prox_ctrl3" = "0x0e"
|
||||
register "reg_prox_ctrl4" = "0x07"
|
||||
register "reg_prox_ctrl5" = "0xc6"
|
||||
register "reg_prox_ctrl6" = "0x20"
|
||||
register "reg_prox_ctrl7" = "0x0d"
|
||||
register "reg_prox_ctrl8" = "0x8d"
|
||||
register "reg_prox_ctrl9" = "0x43"
|
||||
register "reg_prox_ctrl10" = "0x1f"
|
||||
register "reg_prox_ctrl11" = "0x00"
|
||||
register "reg_prox_ctrl12" = "0x00"
|
||||
register "reg_prox_ctrl13" = "0x00"
|
||||
register "reg_prox_ctrl14" = "0x00"
|
||||
register "reg_prox_ctrl15" = "0x00"
|
||||
register "reg_prox_ctrl16" = "0x00"
|
||||
register "reg_prox_ctrl17" = "0x00"
|
||||
register "reg_prox_ctrl18" = "0x00"
|
||||
register "reg_prox_ctrl19" = "0x00"
|
||||
register "reg_sar_ctrl0" = "0x50"
|
||||
register "reg_sar_ctrl1" = "0x8a"
|
||||
register "reg_sar_ctrl2" = "0x3c"
|
||||
register "cs0_ground" = "0x0"
|
||||
register "combined_sensors_count" = "3"
|
||||
register "combined_sensors[0]" = "0"
|
||||
register "combined_sensors[1]" = "1"
|
||||
register "combined_sensors[2]" = "2"
|
||||
register "resolution" = "SX9310_FINEST"
|
||||
register "avg_pos_strength" = "512"
|
||||
register "startup_sensor" = "0"
|
||||
register "proxraw_strength" = "0"
|
||||
device i2c 28 on end
|
||||
end
|
||||
end # I2C #3
|
||||
|
|
|
@ -121,29 +121,15 @@ chip soc/intel/apollolake
|
|||
register "desc" = ""SAR Proximity Sensor""
|
||||
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_214_IRQ)"
|
||||
register "uid" = "1"
|
||||
register "reg_prox_ctrl0" = "0x10"
|
||||
register "reg_prox_ctrl1" = "0x00"
|
||||
register "reg_prox_ctrl2" = "0x84"
|
||||
register "reg_prox_ctrl3" = "0x0e"
|
||||
register "reg_prox_ctrl4" = "0x07"
|
||||
register "reg_prox_ctrl5" = "0xc6"
|
||||
register "reg_prox_ctrl6" = "0x20"
|
||||
register "reg_prox_ctrl7" = "0x0d"
|
||||
register "reg_prox_ctrl8" = "0x8d"
|
||||
register "reg_prox_ctrl9" = "0x43"
|
||||
register "reg_prox_ctrl10" = "0x11"
|
||||
register "reg_prox_ctrl11" = "0x00"
|
||||
register "reg_prox_ctrl12" = "0x00"
|
||||
register "reg_prox_ctrl13" = "0x00"
|
||||
register "reg_prox_ctrl14" = "0x00"
|
||||
register "reg_prox_ctrl15" = "0x00"
|
||||
register "reg_prox_ctrl16" = "0x00"
|
||||
register "reg_prox_ctrl17" = "0x00"
|
||||
register "reg_prox_ctrl18" = "0x00"
|
||||
register "reg_prox_ctrl19" = "0x00"
|
||||
register "reg_sar_ctrl0" = "0x50"
|
||||
register "reg_sar_ctrl1" = "0x8a"
|
||||
register "reg_sar_ctrl2" = "0x3c"
|
||||
register "cs0_ground" = "0x0"
|
||||
register "combined_sensors_count" = "3"
|
||||
register "combined_sensors[0]" = "0"
|
||||
register "combined_sensors[1]" = "1"
|
||||
register "combined_sensors[2]" = "2"
|
||||
register "resolution" = "SX9310_FINEST"
|
||||
register "avg_pos_strength" = "512"
|
||||
register "startup_sensor" = "0"
|
||||
register "proxraw_strength" = "0"
|
||||
device i2c 28 on end
|
||||
end
|
||||
end # - I2C 1
|
||||
|
|
|
@ -311,30 +311,16 @@ chip soc/intel/skylake
|
|||
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D9_IRQ)"
|
||||
register "speed" = "I2C_SPEED_FAST"
|
||||
register "uid" = "0"
|
||||
register "reg_prox_ctrl0" = "0x10"
|
||||
register "reg_prox_ctrl1" = "0x00"
|
||||
register "reg_prox_ctrl2" = "0x84"
|
||||
register "reg_prox_ctrl3" = "0x0e"
|
||||
register "reg_prox_ctrl4" = "0x07"
|
||||
register "reg_prox_ctrl5" = "0xc6"
|
||||
register "reg_prox_ctrl6" = "0x20"
|
||||
register "reg_prox_ctrl7" = "0x0d"
|
||||
register "reg_prox_ctrl8" = "0x8d"
|
||||
register "reg_prox_ctrl9" = "0x43"
|
||||
register "reg_prox_ctrl10" = "0x1f"
|
||||
register "reg_prox_ctrl11" = "0x00"
|
||||
register "reg_prox_ctrl12" = "0x00"
|
||||
register "reg_prox_ctrl13" = "0x00"
|
||||
register "reg_prox_ctrl14" = "0x00"
|
||||
register "reg_prox_ctrl15" = "0x00"
|
||||
register "reg_prox_ctrl16" = "0x00"
|
||||
register "reg_prox_ctrl17" = "0x00"
|
||||
register "reg_prox_ctrl18" = "0x00"
|
||||
register "reg_prox_ctrl19" = "0x00"
|
||||
register "reg_sar_ctrl0" = "0x50"
|
||||
register "reg_sar_ctrl1" = "0x8a"
|
||||
register "reg_sar_ctrl2" = "0x3c"
|
||||
device i2c 28 on end
|
||||
register "cs0_ground" = "0x0"
|
||||
register "combined_sensors_count" = "3"
|
||||
register "combined_sensors[0]" = "0"
|
||||
register "combined_sensors[1]" = "1"
|
||||
register "combined_sensors[2]" = "2"
|
||||
register "resolution" = "SX9310_FINEST"
|
||||
register "avg_pos_strength" = "512"
|
||||
register "startup_sensor" = "0"
|
||||
register "proxraw_strength" = "0"
|
||||
end
|
||||
end # I2C #1
|
||||
device pci 15.2 off end # I2C #2
|
||||
|
@ -352,30 +338,16 @@ chip soc/intel/skylake
|
|||
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D10_IRQ)"
|
||||
register "speed" = "I2C_SPEED_FAST"
|
||||
register "uid" = "1"
|
||||
register "reg_prox_ctrl0" = "0x10"
|
||||
register "reg_prox_ctrl1" = "0x00"
|
||||
register "reg_prox_ctrl2" = "0x84"
|
||||
register "reg_prox_ctrl3" = "0x0e"
|
||||
register "reg_prox_ctrl4" = "0x07"
|
||||
register "reg_prox_ctrl5" = "0xc6"
|
||||
register "reg_prox_ctrl6" = "0x20"
|
||||
register "reg_prox_ctrl7" = "0x0d"
|
||||
register "reg_prox_ctrl8" = "0x8d"
|
||||
register "reg_prox_ctrl9" = "0x43"
|
||||
register "reg_prox_ctrl10" = "0x1f"
|
||||
register "reg_prox_ctrl11" = "0x00"
|
||||
register "reg_prox_ctrl12" = "0x00"
|
||||
register "reg_prox_ctrl13" = "0x00"
|
||||
register "reg_prox_ctrl14" = "0x00"
|
||||
register "reg_prox_ctrl15" = "0x00"
|
||||
register "reg_prox_ctrl16" = "0x00"
|
||||
register "reg_prox_ctrl17" = "0x00"
|
||||
register "reg_prox_ctrl18" = "0x00"
|
||||
register "reg_prox_ctrl19" = "0x00"
|
||||
register "reg_sar_ctrl0" = "0x50"
|
||||
register "reg_sar_ctrl1" = "0x8a"
|
||||
register "reg_sar_ctrl2" = "0x3c"
|
||||
device i2c 28 on end
|
||||
register "cs0_ground" = "0x0"
|
||||
register "combined_sensors_count" = "3"
|
||||
register "combined_sensors[0]" = "0"
|
||||
register "combined_sensors[1]" = "1"
|
||||
register "combined_sensors[2]" = "2"
|
||||
register "resolution" = "SX9310_FINEST"
|
||||
register "avg_pos_strength" = "512"
|
||||
register "startup_sensor" = "0"
|
||||
register "proxraw_strength" = "0"
|
||||
end
|
||||
end # I2C #5
|
||||
device pci 19.2 on
|
||||
|
|
|
@ -82,29 +82,15 @@ chip soc/intel/tigerlake
|
|||
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)"
|
||||
register "speed" = "I2C_SPEED_FAST"
|
||||
register "uid" = "0"
|
||||
register "reg_prox_ctrl0" = "0x10"
|
||||
register "reg_prox_ctrl1" = "0x00"
|
||||
register "reg_prox_ctrl2" = "0x84"
|
||||
register "reg_prox_ctrl3" = "0x0e"
|
||||
register "reg_prox_ctrl4" = "0x07"
|
||||
register "reg_prox_ctrl5" = "0xc6"
|
||||
register "reg_prox_ctrl6" = "0x20"
|
||||
register "reg_prox_ctrl7" = "0x0d"
|
||||
register "reg_prox_ctrl8" = "0x8d"
|
||||
register "reg_prox_ctrl9" = "0x43"
|
||||
register "reg_prox_ctrl10" = "0x1f"
|
||||
register "reg_prox_ctrl11" = "0x00"
|
||||
register "reg_prox_ctrl12" = "0x00"
|
||||
register "reg_prox_ctrl13" = "0x00"
|
||||
register "reg_prox_ctrl14" = "0x00"
|
||||
register "reg_prox_ctrl15" = "0x00"
|
||||
register "reg_prox_ctrl16" = "0x00"
|
||||
register "reg_prox_ctrl17" = "0x00"
|
||||
register "reg_prox_ctrl18" = "0x00"
|
||||
register "reg_prox_ctrl19" = "0x00"
|
||||
register "reg_sar_ctrl0" = "0x50"
|
||||
register "reg_sar_ctrl1" = "0x8a"
|
||||
register "reg_sar_ctrl2" = "0x3c"
|
||||
register "cs0_ground" = "0x0"
|
||||
register "combined_sensors_count" = "3"
|
||||
register "combined_sensors[0]" = "0"
|
||||
register "combined_sensors[1]" = "1"
|
||||
register "combined_sensors[2]" = "2"
|
||||
register "resolution" = "SX9310_FINEST"
|
||||
register "avg_pos_strength" = "512"
|
||||
register "startup_sensor" = "0"
|
||||
register "proxraw_strength" = "0"
|
||||
device i2c 28 on end
|
||||
end
|
||||
end
|
||||
|
|
|
@ -69,29 +69,15 @@ chip soc/intel/tigerlake
|
|||
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)"
|
||||
register "speed" = "I2C_SPEED_FAST"
|
||||
register "uid" = "0"
|
||||
register "reg_prox_ctrl0" = "0x10"
|
||||
register "reg_prox_ctrl1" = "0x00"
|
||||
register "reg_prox_ctrl2" = "0x84"
|
||||
register "reg_prox_ctrl3" = "0x0e"
|
||||
register "reg_prox_ctrl4" = "0x07"
|
||||
register "reg_prox_ctrl5" = "0xc6"
|
||||
register "reg_prox_ctrl6" = "0x20"
|
||||
register "reg_prox_ctrl7" = "0x0d"
|
||||
register "reg_prox_ctrl8" = "0x8d"
|
||||
register "reg_prox_ctrl9" = "0x43"
|
||||
register "reg_prox_ctrl10" = "0x1f"
|
||||
register "reg_prox_ctrl11" = "0x00"
|
||||
register "reg_prox_ctrl12" = "0x00"
|
||||
register "reg_prox_ctrl13" = "0x00"
|
||||
register "reg_prox_ctrl14" = "0x00"
|
||||
register "reg_prox_ctrl15" = "0x00"
|
||||
register "reg_prox_ctrl16" = "0x00"
|
||||
register "reg_prox_ctrl17" = "0x00"
|
||||
register "reg_prox_ctrl18" = "0x00"
|
||||
register "reg_prox_ctrl19" = "0x00"
|
||||
register "reg_sar_ctrl0" = "0x50"
|
||||
register "reg_sar_ctrl1" = "0x8a"
|
||||
register "reg_sar_ctrl2" = "0x3c"
|
||||
register "cs0_ground" = "0x0"
|
||||
register "combined_sensors_count" = "3"
|
||||
register "combined_sensors[0]" = "0"
|
||||
register "combined_sensors[1]" = "1"
|
||||
register "combined_sensors[2]" = "2"
|
||||
register "resolution" = "SX9310_FINEST"
|
||||
register "avg_pos_strength" = "512"
|
||||
register "startup_sensor" = "0"
|
||||
register "proxraw_strength" = "0"
|
||||
device i2c 28 on end
|
||||
end
|
||||
end
|
||||
|
|
|
@ -39,29 +39,15 @@ chip soc/intel/tigerlake
|
|||
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)"
|
||||
register "speed" = "I2C_SPEED_FAST"
|
||||
register "uid" = "0"
|
||||
register "reg_prox_ctrl0" = "0x10"
|
||||
register "reg_prox_ctrl1" = "0x00"
|
||||
register "reg_prox_ctrl2" = "0x84"
|
||||
register "reg_prox_ctrl3" = "0x0e"
|
||||
register "reg_prox_ctrl4" = "0x07"
|
||||
register "reg_prox_ctrl5" = "0xc6"
|
||||
register "reg_prox_ctrl6" = "0x20"
|
||||
register "reg_prox_ctrl7" = "0x0d"
|
||||
register "reg_prox_ctrl8" = "0x8d"
|
||||
register "reg_prox_ctrl9" = "0x43"
|
||||
register "reg_prox_ctrl10" = "0x1f"
|
||||
register "reg_prox_ctrl11" = "0x00"
|
||||
register "reg_prox_ctrl12" = "0x00"
|
||||
register "reg_prox_ctrl13" = "0x00"
|
||||
register "reg_prox_ctrl14" = "0x00"
|
||||
register "reg_prox_ctrl15" = "0x00"
|
||||
register "reg_prox_ctrl16" = "0x00"
|
||||
register "reg_prox_ctrl17" = "0x00"
|
||||
register "reg_prox_ctrl18" = "0x00"
|
||||
register "reg_prox_ctrl19" = "0x00"
|
||||
register "reg_sar_ctrl0" = "0x50"
|
||||
register "reg_sar_ctrl1" = "0x8a"
|
||||
register "reg_sar_ctrl2" = "0x3c"
|
||||
register "cs0_ground" = "0x0"
|
||||
register "combined_sensors_count" = "3"
|
||||
register "combined_sensors[0]" = "0"
|
||||
register "combined_sensors[1]" = "1"
|
||||
register "combined_sensors[2]" = "2"
|
||||
register "resolution" = "SX9310_FINEST"
|
||||
register "avg_pos_strength" = "512"
|
||||
register "startup_sensor" = "0"
|
||||
register "proxraw_strength" = "0"
|
||||
device i2c 28 on end
|
||||
end
|
||||
end
|
||||
|
|
|
@ -155,29 +155,15 @@ chip soc/intel/tigerlake
|
|||
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)"
|
||||
register "speed" = "I2C_SPEED_FAST"
|
||||
register "uid" = "0"
|
||||
register "reg_prox_ctrl0" = "0x10"
|
||||
register "reg_prox_ctrl1" = "0x00"
|
||||
register "reg_prox_ctrl2" = "0x84"
|
||||
register "reg_prox_ctrl3" = "0x0e"
|
||||
register "reg_prox_ctrl4" = "0x07"
|
||||
register "reg_prox_ctrl5" = "0xc6"
|
||||
register "reg_prox_ctrl6" = "0x20"
|
||||
register "reg_prox_ctrl7" = "0x0d"
|
||||
register "reg_prox_ctrl8" = "0x8d"
|
||||
register "reg_prox_ctrl9" = "0x43"
|
||||
register "reg_prox_ctrl10" = "0x1f"
|
||||
register "reg_prox_ctrl11" = "0x00"
|
||||
register "reg_prox_ctrl12" = "0x00"
|
||||
register "reg_prox_ctrl13" = "0x00"
|
||||
register "reg_prox_ctrl14" = "0x00"
|
||||
register "reg_prox_ctrl15" = "0x00"
|
||||
register "reg_prox_ctrl16" = "0x00"
|
||||
register "reg_prox_ctrl17" = "0x00"
|
||||
register "reg_prox_ctrl18" = "0x00"
|
||||
register "reg_prox_ctrl19" = "0x00"
|
||||
register "reg_sar_ctrl0" = "0x50"
|
||||
register "reg_sar_ctrl1" = "0x8a"
|
||||
register "reg_sar_ctrl2" = "0x3c"
|
||||
register "cs0_ground" = "0x0"
|
||||
register "combined_sensors_count" = "3"
|
||||
register "combined_sensors[0]" = "0"
|
||||
register "combined_sensors[1]" = "1"
|
||||
register "combined_sensors[2]" = "2"
|
||||
register "resolution" = "SX9310_FINEST"
|
||||
register "avg_pos_strength" = "512"
|
||||
register "startup_sensor" = "0"
|
||||
register "proxraw_strength" = "0"
|
||||
device i2c 28 on end
|
||||
end
|
||||
end
|
||||
|
|
|
@ -213,29 +213,14 @@ chip soc/intel/tigerlake
|
|||
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)"
|
||||
register "speed" = "I2C_SPEED_FAST"
|
||||
register "uid" = "0"
|
||||
register "reg_prox_ctrl0" = "0x10"
|
||||
register "reg_prox_ctrl1" = "0x00"
|
||||
register "reg_prox_ctrl2" = "0x84"
|
||||
register "reg_prox_ctrl3" = "0x0e"
|
||||
register "reg_prox_ctrl4" = "0x07"
|
||||
register "reg_prox_ctrl5" = "0xc6"
|
||||
register "reg_prox_ctrl6" = "0x20"
|
||||
register "reg_prox_ctrl7" = "0x0d"
|
||||
register "reg_prox_ctrl8" = "0x8d"
|
||||
register "reg_prox_ctrl9" = "0x43"
|
||||
register "reg_prox_ctrl10" = "0x1f"
|
||||
register "reg_prox_ctrl11" = "0x00"
|
||||
register "reg_prox_ctrl12" = "0x00"
|
||||
register "reg_prox_ctrl13" = "0x00"
|
||||
register "reg_prox_ctrl14" = "0x00"
|
||||
register "reg_prox_ctrl15" = "0x00"
|
||||
register "reg_prox_ctrl16" = "0x00"
|
||||
register "reg_prox_ctrl17" = "0x00"
|
||||
register "reg_prox_ctrl18" = "0x00"
|
||||
register "reg_prox_ctrl19" = "0x00"
|
||||
register "reg_sar_ctrl0" = "0x50"
|
||||
register "reg_sar_ctrl1" = "0x8a"
|
||||
register "reg_sar_ctrl2" = "0x3c"
|
||||
register "cs0_ground" = "0x0"
|
||||
register "combined_sensors_count" = "3"
|
||||
register "combined_sensors[0]" = "0"
|
||||
register "combined_sensors[1]" = "1"
|
||||
register "combined_sensors[2]" = "2"
|
||||
register "avg_pos_strength" = "512"
|
||||
register "startup_sensor" = "0"
|
||||
register "proxraw_strength" = "0"
|
||||
device i2c 28 on end
|
||||
end
|
||||
end
|
||||
|
|
|
@ -177,29 +177,15 @@ chip soc/intel/tigerlake
|
|||
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)"
|
||||
register "speed" = "I2C_SPEED_FAST"
|
||||
register "uid" = "0"
|
||||
register "reg_prox_ctrl0" = "0x10"
|
||||
register "reg_prox_ctrl1" = "0x00"
|
||||
register "reg_prox_ctrl2" = "0x84"
|
||||
register "reg_prox_ctrl3" = "0x0e"
|
||||
register "reg_prox_ctrl4" = "0x07"
|
||||
register "reg_prox_ctrl5" = "0xc6"
|
||||
register "reg_prox_ctrl6" = "0x20"
|
||||
register "reg_prox_ctrl7" = "0x0d"
|
||||
register "reg_prox_ctrl8" = "0x8d"
|
||||
register "reg_prox_ctrl9" = "0x43"
|
||||
register "reg_prox_ctrl10" = "0x1f"
|
||||
register "reg_prox_ctrl11" = "0x00"
|
||||
register "reg_prox_ctrl12" = "0x00"
|
||||
register "reg_prox_ctrl13" = "0x00"
|
||||
register "reg_prox_ctrl14" = "0x00"
|
||||
register "reg_prox_ctrl15" = "0x00"
|
||||
register "reg_prox_ctrl16" = "0x00"
|
||||
register "reg_prox_ctrl17" = "0x00"
|
||||
register "reg_prox_ctrl18" = "0x00"
|
||||
register "reg_prox_ctrl19" = "0x00"
|
||||
register "reg_sar_ctrl0" = "0x50"
|
||||
register "reg_sar_ctrl1" = "0x8a"
|
||||
register "reg_sar_ctrl2" = "0x3c"
|
||||
register "cs0_ground" = "0x0"
|
||||
register "combined_sensors_count" = "3"
|
||||
register "combined_sensors[0]" = "0"
|
||||
register "combined_sensors[1]" = "1"
|
||||
register "combined_sensors[2]" = "2"
|
||||
register "resolution" = "SX9310_FINEST"
|
||||
register "avg_pos_strength" = "512"
|
||||
register "startup_sensor" = "0"
|
||||
register "proxraw_strength" = "0"
|
||||
device i2c 28 on end
|
||||
end
|
||||
end
|
||||
|
|
Loading…
Reference in New Issue