some black magic for initializing the old version of the k8t800

Change-Id: I1b5d23cee9f933aa090c9bd09890c7b335567e17
Signed-off-by: Florian Zumbiehl <florz@florz.de>
Reviewed-on: http://review.coreboot.org/388
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
This commit is contained in:
Florian Zumbiehl 2011-11-01 20:19:38 +01:00 committed by Rudolf Marek
parent 1b940fd424
commit 6a3e8d62f8
2 changed files with 20 additions and 0 deletions

View File

@ -33,9 +33,14 @@ static void bridge_enable(struct device *dev)
writeback(dev, 0x40, 0x91);
writeback(dev, 0x41, 0x40);
writeback(dev, 0x43, 0x44);
#if CONFIG_SOUTHBRIDGE_VIA_K8T800_OLD
writeback(dev, 0x42, 0x80);
writeback(dev, 0x44, 0x35);
#else
writeback(dev, 0x44, 0x31); /* K8M890 should have 0x35 datasheet
* says it is reserved
*/
#endif
writeback(dev, 0x45, 0x3a);
writeback(dev, 0x46, 0x88); /* PCI ID lo */
writeback(dev, 0x47, 0xb1); /* PCI ID hi */
@ -44,7 +49,11 @@ static void bridge_enable(struct device *dev)
* (Forward VGA compatible memory and I/O cycles )
*/
#if CONFIG_SOUTHBRIDGE_VIA_K8T800_OLD
writeback(dev, 0x3e, 0x0a);
#else
writeback(dev, 0x3e, 0x16);
#endif
dump_south(dev);
/* disable I/O and memory decode, or it freezes PCI bus during BAR sizing */

View File

@ -51,12 +51,21 @@ void k8x8xx_vt8237r_cfg(struct device *dev, struct device *devsb)
pci_write_config8(dev, 0x70, 0xc2);
/* PCI Control */
#if !CONFIG_SOUTHBRIDGE_VIA_K8T800_OLD
pci_write_config8(dev, 0x72, 0xee);
#endif
pci_write_config8(dev, 0x73, 0x01);
#if CONFIG_SOUTHBRIDGE_VIA_K8T800_OLD
pci_write_config8(dev, 0x74, 0x64);
pci_write_config8(dev, 0x75, 0x3f);
#else
pci_write_config8(dev, 0x74, 0x24);
pci_write_config8(dev, 0x75, 0x0f);
#endif
pci_write_config8(dev, 0x76, 0x50);
#if !CONFIG_SOUTHBRIDGE_VIA_K8T800_OLD
pci_write_config8(dev, 0x77, 0x08);
#endif
pci_write_config8(dev, 0x78, 0x01);
/* APIC on HT */
pci_write_config8(dev, 0x7c, 0x7f);
@ -151,7 +160,9 @@ static void ctrl_init(struct device *dev)
/* PCI CFG Address bits[27:24] are used as extended register address
bit[11:8] */
#if !CONFIG_SOUTHBRIDGE_VIA_K8T800_OLD
pci_write_config8(dev, 0x47, 0x30);
#endif
/* VT8237R specific configuration other SB are done in their own directories */