mb/google/skyrim/var/frostflow: Update devicetree setting
Update devicetree based on the schematic_20221014. BUG=b:253506651, b:251367588 BRANCH=None TEST=FW_NAME=frostflow emerge-skyrim coreboot Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: Ia03962b0e01394ddcd4971cbe0172ef5bd913e15 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68482 Reviewed-by: Chao Gui <chaogui@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
This commit is contained in:
Frank Wu
Karthik Ramasubramanian
parent
6990cb29ab
commit
749daf360b
|
|
@ -1,5 +1,122 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
chip soc/amd/mendocino
|
||||
device domain 0 on end
|
||||
device domain 0 on
|
||||
device ref gpp_bridge_a on # Internal GPP Bridge 0 to Bus A
|
||||
device ref xhci_1 on # XHCI1 controller
|
||||
chip drivers/usb/acpi
|
||||
device ref xhci_1_root_hub on # XHCI1 root hub
|
||||
chip drivers/usb/acpi
|
||||
device ref usb3_port3 on # USB 3.1 port3
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-A Port A1 (DB)""
|
||||
register "type" = "UPC_TYPE_USB3_A"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, CENTER, ACPI_PLD_GROUP(3, 1))"
|
||||
device usb 3.2 on end
|
||||
end
|
||||
end # USB 3.1 port3
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
device ref usb2_port3 on # USB 2 port3
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-A Port A1 (DB)""
|
||||
register "type" = "UPC_TYPE_USB3_A"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, CENTER, ACPI_PLD_GROUP(3, 1))"
|
||||
device usb 2.2 on end
|
||||
end
|
||||
end # USB 2 port3
|
||||
end
|
||||
end # XHCI1 root hub
|
||||
end
|
||||
end # XHCI1 controller
|
||||
end # Internal GPP Bridge 0 to Bus A
|
||||
end # domain
|
||||
|
||||
device ref i2c_0 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""ELAN0000""
|
||||
register "desc" = ""ELAN Touchpad""
|
||||
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_40)"
|
||||
register "wake" = "GEVENT_20"
|
||||
register "detect" = "1"
|
||||
device i2c 15 on end
|
||||
end
|
||||
end # I2C0
|
||||
device ref i2c_1 on
|
||||
chip drivers/i2c/hid
|
||||
register "generic.hid" = ""ELAN9008""
|
||||
register "generic.desc" = ""ELAN Touchscreen""
|
||||
register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_29)"
|
||||
register "generic.probed" = "1"
|
||||
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_131)"
|
||||
register "generic.enable_delay_ms" = "1"
|
||||
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_136)"
|
||||
register "generic.reset_off_delay_ms" = "2"
|
||||
register "generic.reset_delay_ms" = "20"
|
||||
register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_76)"
|
||||
register "generic.stop_delay_ms" = "300"
|
||||
register "generic.stop_off_delay_ms" = "2"
|
||||
register "generic.has_power_resource" = "1"
|
||||
register "hid_desc_reg_offset" = "0x01"
|
||||
device i2c 10 on end
|
||||
end
|
||||
chip drivers/generic/gpio_keys
|
||||
register "name" = ""PENH""
|
||||
register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPIO_3)"
|
||||
register "key.dev_name" = ""EJCT""
|
||||
register "key.wakeup_event_action" = "EV_ACT_DEASSERTED"
|
||||
register "key.linux_code" = "SW_PEN_INSERTED"
|
||||
register "key.linux_input_type" = "EV_SW"
|
||||
register "key.label" = ""pen_eject""
|
||||
register "key.debounce_interval" = "100"
|
||||
register "key.wakeup_route" = "WAKEUP_ROUTE_GPIO_IRQ"
|
||||
device generic 0 on end
|
||||
end
|
||||
end # I2C1
|
||||
device ref i2c_2 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""RTL5682""
|
||||
register "name" = ""RT58""
|
||||
register "desc" = ""Realtek RT5682""
|
||||
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPIO_90)"
|
||||
register "property_count" = "1"
|
||||
register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
|
||||
register "property_list[0].name" = ""realtek,jd-src""
|
||||
register "property_list[0].integer" = "1"
|
||||
device i2c 1a on end
|
||||
end
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""10EC1019""
|
||||
register "desc" = ""Realtek SPK AMP R""
|
||||
register "uid" = "1"
|
||||
device i2c 29 on end
|
||||
end
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""10EC1019""
|
||||
register "desc" = ""Realtek SPK AMP L""
|
||||
register "uid" = "2"
|
||||
register "probed" = "1"
|
||||
device i2c 2a on end
|
||||
end
|
||||
end # I2C2
|
||||
|
||||
device ref uart_1 on
|
||||
chip drivers/uart/acpi
|
||||
register "name" = ""CRFP""
|
||||
register "desc" = ""Fingerprint Reader""
|
||||
register "hid" = "ACPI_DT_NAMESPACE_HID"
|
||||
register "compat_string" = ""google,cros-ec-uart""
|
||||
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_24)"
|
||||
register "wake" = "GEVENT_15"
|
||||
register "uart" = "ACPI_UART_RAW_DEVICE(3000000, 64)"
|
||||
register "has_power_resource" = "1"
|
||||
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_12)"
|
||||
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_4)"
|
||||
register "enable_delay_ms" = "3"
|
||||
device generic 0 alias fpmcu on end
|
||||
end
|
||||
end # UART1
|
||||
|
||||
end # chip soc/amd/mendocino
|
||||
|
|
|
|||
Loading…
Reference in New Issue