Exynos 5420: Enable dynamic CBMEM

...  In order to do this, the graphics memory has to move into
the resource allocator and out of CBMEM.

Change-Id: I565c3d6dea747822fbabf6f3845232d4adfbf333
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/63657
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4391
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>

src/cpu/samsung/exynos5420/Kconfig

@@ -3,6 +3,7 @@ config CPU_SAMSUNG_EXYNOS5420
 	select HAVE_MONOTONIC_TIMER
 	select HAVE_UART_SPECIAL
 	select EARLY_CONSOLE
+	select DYNAMIC_CBMEM
 	bool
 	default n
 

src/cpu/samsung/exynos5420/Makefile.inc

@@ -33,6 +33,7 @@ romstage-y += gpio.c
 romstage-y += timer.c
 romstage-y += i2c.c
 #romstage-y += wdt.c
+romstage-y += cbmem.c
 
 ramstage-y += spi.c
 ramstage-y += clock.c
@@ -50,6 +51,7 @@ ramstage-y += i2c.c
 ramstage-y += dp-reg.c
 ramstage-y += fb.c
 ramstage-y += usb.c
+ramstage-y += cbmem.c
 
 exynos5420_add_bl1: $(obj)/coreboot.pre
 	printf "    DD         Adding Samsung Exynos5420 BL1\n"

src/cpu/samsung/exynos5420/cbmem.c

@@ -0,0 +1,28 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stddef.h>
+#include <cbmem.h>
+#include "cpu.h"
+
+void *cbmem_top(void)
+{
+	return (void *)(get_fb_base_kb() * KiB);
+}
+

src/cpu/samsung/exynos5420/cpu.c

@@ -32,9 +32,6 @@
 #include "usb.h"
 #include "chip.h"
 
-#define RAM_BASE_KB (CONFIG_SYS_SDRAM_BASE >> 10)
-#define RAM_SIZE_KB (CONFIG_DRAM_SIZE_MB << 10UL)
-
 static unsigned int cpu_id;
 static unsigned int cpu_rev;
 
@@ -62,16 +59,14 @@ static void set_cpu_id(void)
  * involving lots of machine and callbacks, is hard to debug and
  * verify.
  */
-static void exynos_displayport_init(device_t dev)
+static void exynos_displayport_init(device_t dev, u32 lcdbase,
+		unsigned long fb_size)
 {
 	struct cpu_samsung_exynos5420_config *conf = dev->chip_info;
 	/* put these on the stack. If, at some point, we want to move
 	 * this code to a pre-ram stage, it will be much easier.
 	 */
 	struct exynos5_fimd_panel panel;
-	unsigned long int fb_size;
-	u32 lcdbase;
-
 	memset(&panel, 0, sizeof(panel));
 
 	panel.is_dp = 1; /* Display I/F is eDP */
@@ -92,11 +87,7 @@ static void exynos_displayport_init(device_t dev)
 	panel.xres = conf->xres;
 	panel.yres = conf->yres;
 
-	/* The size is a magic number from hardware. */
-	fb_size = conf->xres * conf->yres * (conf->bpp / 8);
-	lcdbase = (uintptr_t)cbmem_add(CBMEM_ID_CONSOLE, fb_size);
-	printk(BIOS_SPEW, "LCD framebuffer base is %p\n", (void *)(lcdbase));
-
+	printk(BIOS_SPEW, "LCD framebuffer @%p\n", (void *)(lcdbase));
 	memset((void *)lcdbase, 0, fb_size);	/* clear the framebuffer */
 
 	/*
@@ -110,23 +101,26 @@ static void exynos_displayport_init(device_t dev)
 	 */
 	uint32_t lower = ALIGN_DOWN(lcdbase, MiB);
 	uint32_t upper = ALIGN_UP(lcdbase + fb_size, MiB);
-	dcache_clean_invalidate_by_mva(lower, upper - lower);
-	mmu_config_range(lower/MiB, (upper - lower)/MiB, DCACHE_OFF);
 
-	mmio_resource(dev, 1, lcdbase/KiB, (fb_size + KiB - 1)/KiB);
-	printk(BIOS_DEBUG,
-	       "Initializing Exynos VGA, base %p\n", (void *)lcdbase);
+	dcache_clean_invalidate_by_mva(lower, upper - lower);
+	mmu_config_range(lower / MiB, (upper - lower) / MiB, DCACHE_OFF);
+
+	printk(BIOS_DEBUG, "Initializing Exynos LCD.\n");
+
 	lcd_ctrl_init(fb_size, &panel, (void *)lcdbase);
 }
 
 static void cpu_enable(device_t dev)
 {
-	exynos_displayport_init(dev);
+	unsigned long fb_size = FB_SIZE_KB * KiB;
+	u32 lcdbase = get_fb_base_kb() * KiB;
 
-	ram_resource(dev, 0, RAM_BASE_KB, RAM_SIZE_KB);
+	ram_resource(dev, 0, RAM_BASE_KB, RAM_SIZE_KB - FB_SIZE_KB);
+	mmio_resource(dev, 1, lcdbase / KiB, (fb_size + KiB - 1) / KiB);
+
+	exynos_displayport_init(dev, lcdbase, fb_size);
 
 	set_cpu_id();
-
 }
 
 static void cpu_init(device_t dev)

src/cpu/samsung/exynos5420/cpu.h

@@ -202,4 +202,14 @@ void exynos5420_config_l2_cache(void);
 
 extern struct tmu_info exynos5420_tmu_info;
 
+/* TODO clean up defines. */
+#define FB_SIZE_KB  4096
+#define RAM_BASE_KB (CONFIG_SYS_SDRAM_BASE >> 10)
+#define RAM_SIZE_KB (CONFIG_DRAM_SIZE_MB << 10UL)
+
+static inline u32 get_fb_base_kb(void)
+{
+	return RAM_BASE_KB + RAM_SIZE_KB - FB_SIZE_KB;
+}
+
 #endif	/* _EXYNOS5420_CPU_H */

src/mainboard/google/pit/mainboard.c

@@ -311,7 +311,7 @@ static void mainboard_init(device_t dev)
 		.base = (struct exynos5_dp *)EXYNOS5420_DP1_BASE,
 		.video_info = &dp_video_info,
 	};
-	void *fb_addr;
+	void *fb_addr = (void *)(get_fb_base_kb() * KiB);
 
 	gpio_init();
 
@@ -323,7 +323,6 @@ static void mainboard_init(device_t dev)
 	/* Disable USB3.0 PLL to save 250mW of power */
 	disable_usb30_pll();
 
-	fb_addr = cbmem_find(CBMEM_ID_CONSOLE);
 	set_vbe_mode_info_valid(&edid, (uintptr_t)fb_addr);
 
 	/*
@@ -350,6 +349,7 @@ static void mainboard_init(device_t dev)
 	// gpio_info();
 }
 
+#if !CONFIG_DYNAMIC_CBMEM
 void get_cbmem_table(uint64_t *base, uint64_t *size)
 {
 	*size = CONFIG_COREBOOT_TABLES_SIZE;
@@ -357,13 +357,16 @@ void get_cbmem_table(uint64_t *base, uint64_t *size)
 				((unsigned)CONFIG_DRAM_SIZE_MB << 20ULL) -
 				CONFIG_COREBOOT_TABLES_SIZE;
 }
+#endif
 
 static void mainboard_enable(device_t dev)
 {
 	dev->ops->init = &mainboard_init;
 
+#if !CONFIG_DYNAMIC_CBMEM
 	/* set up coreboot tables */
 	cbmem_initialize();
+#endif
 
 	/* set up dcache and MMU */
 	/* FIXME: this should happen via resource allocator */

src/mainboard/google/pit/romstage.c

@@ -22,6 +22,7 @@
 
 #include <armv7.h>
 #include <cbfs.h>
+#include <cbmem.h>
 
 #include <arch/cache.h>
 #include <cpu/samsung/exynos5420/i2c.h>
@@ -270,6 +271,9 @@ void main(void)
 	/* if this is uncommented SPI will not work correctly. */
 	clock_set_rate(PERIPH_ID_SPI1, 50000000);
 	simple_spi_test();
+
+	cbmem_initialize_empty();
+
 	entry = cbfs_load_stage(CBFS_DEFAULT_MEDIA, "fallback/coreboot_ram");
 	simple_spi_test();
 	stage_exit(entry);