GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user / 

board porter: printk should always be available in CAR mode.

Also drop CONFIG_USE_INIT, it's only been selected on one ASROCK board
but it's not been used there. Very odd.

There is one usage of CONFIG_USE_INIT which was always off in 
src/cpu/intel/car/cache_as_ram.inc and we have to figure out what to do with
those few lines.

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5682 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Stefan Reinauer 2010-08-03 15:42:29 +00:00 committed by Stefan Reinauer
parent 0362c6d6a7
commit 8c4f31b3b5
79 changed files with 43 additions and 170 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

43
documentation/LinuxBIOS-AMD64.tex
View File

@ -1533,14 +1533,6 @@ There are two big additions to the build process and, furthermore, more than two
Set to \texttt{1} to use Cache As Ram (CAR). Defaults to \texttt{0}
\item \begin{verbatim}CONFIG_USE_INIT\end{verbatim}
Set to \texttt{1} to figure this out. Defaults to \texttt{0}
\item \begin{verbatim}CONFIG_USE_PRINTK_IN_CAR\end{verbatim}
Set to \texttt{1} to use printk, instead of the primitive print functions, in CAR. Defaults to \texttt{0}
\end{itemize}
Before going over the new image types, derived from v3, we will quickly review the standard v2 image types. We are hoping this review will
@ -1646,41 +1638,6 @@ There is a make variable, INIT-OBJECTS, that for all our other targets is empty.
No significant change from romcc code.
\subsubsection{boot sequence}
No significant change from romcc code, except that the CAR code has to set up a stack.
\subsection{car + CONFIG\_USE\_PRINTK\_IN\_CAR images}
When CONFIG\_USE\_PRINTK\_IN\_CAR is set, the CAR code can use printk instead of the primitive print functions. This config variable is used in one of two ways. If CONFIG\_USE\_INIT is 0, then different .c files just include other .c files, as in console.c:
\begin{verbatim}
#if CONFIG_USE_PRINTK_IN_CAR == 0
static void __console_tx_byte(unsigned char byte)
{
uart_tx_byte(byte);
}
#include "console_print.c"
#else
/* CONFIG_USE_PRINTK_IN_CAR == 1 */
#include "console_printk.c"
#if CONFIG_USE_INIT == 0
// do_printk
#include "../../../console/vtxprintf.c"
#include "printk_init.c"
#endif
#endif /* CONFIG_USE_PRINTK_IN_CAR */
\end{verbatim}\footnote{yuck!}
If CONFIG\_USE\_INIT is 1, then the Config.lb is configured differently:
\begin{verbatim}
if CONFIG_USE_INIT
if CONFIG_USE_PRINTK_IN_CAR
initobject printk_init.o
end
end
\end{verbatim}\footnote{see previous footnote}
\subsubsection{layout}
No significant change from romcc code.

4
src/Kconfig
View File

@ -140,10 +140,6 @@ config HEAP_SIZE
hex
default 0x4000
config USE_PRINTK_IN_CAR
bool
default n
config MAX_CPUS
int
default 1

1
src/cpu/amd/model_10xxx/Kconfig
View File

@ -1,6 +1,5 @@
config CPU_AMD_MODEL_10XXX
bool
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select SSE
select SSE2

1
src/cpu/amd/model_fxx/Kconfig
View File

@ -1,6 +1,5 @@
config CPU_AMD_MODEL_FXX
bool
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select MMX
select SSE

1
src/cpu/intel/socket_FC_PGA370/Kconfig
View File

@ -23,7 +23,6 @@ config CPU_INTEL_SOCKET_FC_PGA370
select CPU_INTEL_MODEL_68X
select MMX
select SSE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select TINY_BOOTBLOCK

1
src/cpu/via/model_c7/Kconfig
View File

@ -3,7 +3,6 @@ config CPU_VIA_C7
select UDELAY_TSC
select MMX
select SSE2
select USE_PRINTK_IN_CAR
config DCACHE_RAM_BASE
hex

2
src/include/assert.h
View File

@ -20,7 +20,7 @@
#ifndef __ASSERT_H__
#define __ASSERT_H__
#if defined(__PRE_RAM__) && !CONFIG_USE_PRINTK_IN_CAR
#if defined(__PRE_RAM__) && !CONFIG_USE_DCACHE_RAM
/* ROMCC versions */
#define ASSERT(x) { \

2
src/include/cpu/x86/bist.h
View File

@ -4,7 +4,7 @@
static void report_bist_failure(u32 bist)
{
if (bist != 0) {
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_EMERG, "BIST failed: %08x", bist);
#else
print_emerg("BIST failed: ");

2
src/lib/generic_sdram.c
View File

@ -6,7 +6,7 @@
static inline void print_debug_sdram_8(const char *strval, uint32_t val)
{
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "%s%02x\n", strval, val);
#else
print_debug(strval); print_debug_hex8(val); print_debug("\n");

24
src/lib/ramtest.c
View File

@ -51,7 +51,7 @@ static void ram_fill(unsigned long start, unsigned long stop)
/*
* Fill.
*/
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "DRAM fill: 0x%08lx-0x%08lx\n", start, stop);
#else
print_debug("DRAM fill: ");
@ -63,7 +63,7 @@ static void ram_fill(unsigned long start, unsigned long stop)
for(addr = start; addr < stop ; addr += 4) {
/* Display address being filled */
if (!(addr & 0xfffff)) {
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "%08lx \r", addr);
#else
print_debug_hex32(addr);
@ -73,7 +73,7 @@ static void ram_fill(unsigned long start, unsigned long stop)
write_phys(addr, (u32)addr);
};
/* Display final address */
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "%08lx\nDRAM filled\n", addr);
#else
print_debug_hex32(addr);
@ -88,7 +88,7 @@ static void ram_verify(unsigned long start, unsigned long stop)
/*
* Verify.
*/
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "DRAM verify: 0x%08lx-0x%08lx\n", start, stop);
#else
print_debug("DRAM verify: ");
@ -101,7 +101,7 @@ static void ram_verify(unsigned long start, unsigned long stop)
unsigned long value;
/* Display address being tested */
if (!(addr & 0xfffff)) {
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "%08lx \r", addr);
#else
print_debug_hex32(addr);
@ -111,7 +111,7 @@ static void ram_verify(unsigned long start, unsigned long stop)
value = read_phys(addr);
if (value != addr) {
/* Display address with error */
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_ERR, "Fail: @0x%08lx Read value=0x%08lx\n", addr, value);
#else
print_err("Fail: @0x");
@ -122,7 +122,7 @@ static void ram_verify(unsigned long start, unsigned long stop)
#endif
i++;
if(i>256) {
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "Aborting.\n");
#else
print_debug("Aborting.\n");
@ -132,14 +132,14 @@ static void ram_verify(unsigned long start, unsigned long stop)
}
}
/* Display final address */
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "%08lx", addr);
#else
print_debug_hex32(addr);
#endif
if (i) {
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "\nDRAM did _NOT_ verify!\n");
#else
print_debug("\nDRAM did _NOT_ verify!\n");
@ -147,7 +147,7 @@ static void ram_verify(unsigned long start, unsigned long stop)
die("DRAM ERROR");
}
else {
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "\nDRAM range verified.\n");
#else
print_debug("\nDRAM range verified.\n");
@ -163,7 +163,7 @@ void ram_check(unsigned long start, unsigned long stop)
* test than a "Is my DRAM faulty?" test. Not all bits
* are tested. -Tyson
*/
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "Testing DRAM : %08lx - %08lx\n", start, stop);
#else
print_debug("Testing DRAM : ");
@ -176,7 +176,7 @@ void ram_check(unsigned long start, unsigned long stop)
/* Make sure we don't read before we wrote */
phys_memory_barrier();
ram_verify(start, stop);
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "Done.\n");
#else
print_debug("Done.\n");

2
src/lib/usbdebug.c
View File

@ -22,7 +22,7 @@
#if !defined(__ROMCC__)
#include <console/console.h>
#else
#if CONFIG_USE_PRINTK_IN_CAR==0
#if CONFIG_USE_DCACHE_RAM==0
#define printk(BIOS_DEBUG, fmt, arg...) do {} while(0)
#endif
#endif

1
src/mainboard/amd/db800/Kconfig
View File

@ -9,7 +9,6 @@ config BOARD_AMD_DB800
select PIRQ_ROUTE
select UDELAY_TSC
select USE_DCACHE_RAM
select USE_PRINTK_IN_CAR
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR

1
src/mainboard/amd/dbm690t/Kconfig
View File

@ -14,7 +14,6 @@ config BOARD_AMD_DBM690T
select HAVE_OPTION_TABLE
select HAVE_MAINBOARD_RESOURCES
select HAVE_BUS_CONFIG
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY

1
src/mainboard/amd/mahogany/Kconfig
View File

@ -15,7 +15,6 @@ config BOARD_AMD_MAHOGANY
select HAVE_MAINBOARD_RESOURCES
select HAVE_BUS_CONFIG
select LIFT_BSP_APIC_ID
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY

1
src/mainboard/amd/mahogany_fam10/Kconfig
View File

@ -11,7 +11,6 @@ config BOARD_AMD_MAHOGANY_FAM10
select HAVE_OPTION_TABLE
select GENERATE_PIRQ_TABLE
select GENERATE_MP_TABLE
select USE_PRINTK_IN_CAR
select HAVE_MAINBOARD_RESOURCES
select USE_DCACHE_RAM
select HAVE_HARD_RESET

1
src/mainboard/amd/norwich/Kconfig
View File

@ -8,7 +8,6 @@ config BOARD_AMD_NORWICH
select PIRQ_ROUTE
select UDELAY_TSC
select USE_DCACHE_RAM
select USE_PRINTK_IN_CAR
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR

1
src/mainboard/amd/pistachio/Kconfig
View File

@ -11,7 +11,6 @@ config BOARD_AMD_PISTACHIO
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY

1
src/mainboard/amd/rumba/Kconfig
View File

@ -25,7 +25,6 @@ config BOARD_AMD_RUMBA
select SOUTHBRIDGE_AMD_CS5536
select UDELAY_TSC
select USE_DCACHE_RAM
select USE_PRINTK_IN_CAR
select HAVE_PIRQ_TABLE
select BOARD_ROMSIZE_KB_256

1
src/mainboard/amd/serengeti_cheetah/Kconfig
View File

@ -12,7 +12,6 @@ config BOARD_AMD_SERENGETI_CHEETAH
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select LIFT_BSP_APIC_ID

24
src/mainboard/amd/serengeti_cheetah/ap_romstage.c
View File

@ -32,8 +32,6 @@
#include "lib/delay.c"
//#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
#include "northbridge/amd/amdk8/debug.c"
@ -58,33 +56,30 @@ static inline unsigned get_nodes(void)
void hardwaremain(int ret_addr)
{
struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE
struct sys_info *sysinfox = ((CONFIG_RAMTOP) - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM
struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE +
CONFIG_DCACHE_RAM_SIZE -
CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE
struct sys_info *sysinfox = ((CONFIG_RAMTOP) -
CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM
struct node_core_id id;
id = get_node_core_id_x();
#if CONFIG_USE_PRINTK_IN_CAR
printk(BIOS_DEBUG, "CODE IN CACHE ON NODE: %02x\n");
#else
print_debug("CODE IN CACHE ON NODE:"); print_debug_hex8(id.nodeid); print_debug("\n");
#endif
printk(BIOS_DEBUG, "CODE IN CACHE ON NODE: %02x\n", id.nodeid);
train_ram(id.nodeid, sysinfo, sysinfox);
/*
go back, but can not use stack any more, because we only keep ret_addr and can not restore esp, and ebp
*/
* go back, but can not use stack any more, because we
* only keep ret_addr and can not restore esp, and ebp.
*/
__asm__ volatile (
"movl %0, %%edi\n\t"
"jmp *%%edi\n\t"
:: "a"(ret_addr)
);
}
#include <arch/registers.h>
@ -96,4 +91,3 @@ void x86_exception(struct eregs *info)
} while(1);
}

1
src/mainboard/amd/serengeti_cheetah_fam10/Kconfig
View File

@ -11,7 +11,6 @@ config BOARD_AMD_SERENGETI_CHEETAH_FAM10
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY

1
src/mainboard/amd/tilapia_fam10/Kconfig
View File

@ -11,7 +11,6 @@ config BOARD_AMD_TILAPIA_FAM10
select HAVE_OPTION_TABLE
select GENERATE_PIRQ_TABLE
select GENERATE_MP_TABLE
select USE_PRINTK_IN_CAR
select HAVE_MAINBOARD_RESOURCES
select USE_DCACHE_RAM
select HAVE_HARD_RESET

1
src/mainboard/arima/hdama/Kconfig
View File

@ -10,7 +10,6 @@ config BOARD_ARIMA_HDAMA
select HAVE_PIRQ_TABLE
select HAVE_OPTION_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY

1
src/mainboard/artecgroup/dbe61/Kconfig
View File

@ -8,7 +8,6 @@ config BOARD_ARTECGROUP_DBE61
select PIRQ_ROUTE
select UDELAY_TSC
select USE_DCACHE_RAM
select USE_PRINTK_IN_CAR
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR

6
src/mainboard/asrock/939a785gmh/Kconfig
View File

@ -16,7 +16,6 @@ config BOARD_ASROCK_939A785GMH
select HAVE_OPTION_TABLE
select HAVE_BUS_CONFIG
select LIFT_BSP_APIC_ID
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY
@ -93,11 +92,6 @@ config HT_CHAIN_UNITID_BASE
default 0x0
depends on BOARD_ASROCK_939A785GMH
config USE_INIT
bool
default n
depends on BOARD_ASROCK_939A785GMH
config IRQ_SLOT_COUNT
int
default 11

1
src/mainboard/asus/a8n_e/Kconfig
View File

@ -10,7 +10,6 @@ config BOARD_ASUS_A8N_E
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select BOARD_ROMSIZE_KB_512

1
src/mainboard/asus/a8v-e_se/Kconfig
View File

@ -8,7 +8,6 @@ config BOARD_ASUS_A8V_E_SE
select SOUTHBRIDGE_VIA_VT8237R
select SOUTHBRIDGE_VIA_K8T890
select SUPERIO_WINBOND_W83627EHG
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_OPTION_TABLE
select HAVE_ACPI_TABLES

1
src/mainboard/asus/m2v-mx_se/Kconfig
View File

@ -26,7 +26,6 @@ config BOARD_ASUS_M2V_MX_SE
select SOUTHBRIDGE_VIA_VT8237R
select SOUTHBRIDGE_VIA_K8M890
select SUPERIO_ITE_IT8712F
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_OPTION_TABLE
select HAVE_ACPI_TABLES

1
src/mainboard/broadcom/blast/Kconfig
View File

@ -11,7 +11,6 @@ config BOARD_BROADCOM_BLAST
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select BOARD_ROMSIZE_KB_512

1
src/mainboard/digitallogic/adl855pc/Kconfig
View File

@ -9,7 +9,6 @@ config BOARD_DIGITALLOGIC_ADL855PC
select HAVE_PIRQ_TABLE
select HAVE_HARD_RESET
select BOARD_ROMSIZE_KB_1024
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select TINY_BOOTBLOCK

1
src/mainboard/digitallogic/msm800sev/Kconfig
View File

@ -9,7 +9,6 @@ config BOARD_DIGITALLOGIC_MSM800SEV
select PIRQ_ROUTE
select UDELAY_TSC
select USE_DCACHE_RAM
select USE_PRINTK_IN_CAR
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR

1
src/mainboard/getac/p470/Kconfig
View File

@ -37,7 +37,6 @@ config BOARD_GETAC_P470
select HAVE_ACPI_SLIC
select HAVE_MAINBOARD_RESOURCES
select MMCONF_SUPPORT
select USE_PRINTK_IN_CAR
select AP_IN_SIPI_WAIT
select UDELAY_LAPIC
select HAVE_SMI_HANDLER

1
src/mainboard/gigabyte/ga_2761gxdk/Kconfig
View File

@ -9,7 +9,6 @@ config BOARD_GIGABYTE_GA_2761GXDK
select HAVE_BUS_CONFIG
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select LIFT_BSP_APIC_ID

1
src/mainboard/gigabyte/m57sli/Kconfig
View File

@ -11,7 +11,6 @@ config BOARD_GIGABYTE_M57SLI
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select LIFT_BSP_APIC_ID

1
src/mainboard/hp/dl145_g3/Kconfig
View File

@ -11,7 +11,6 @@ config BOARD_HP_DL145_G3
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select LIFT_BSP_APIC_ID

1
src/mainboard/ibase/mb899/Kconfig
View File

@ -15,7 +15,6 @@ config BOARD_IBASE_MB899
select HAVE_ACPI_RESUME
select HAVE_MAINBOARD_RESOURCES
select MMCONF_SUPPORT
select USE_PRINTK_IN_CAR
select HAVE_SMI_HANDLER
select BOARD_ROMSIZE_KB_512
select USE_DCACHE_RAM

1
src/mainboard/ibm/e325/Kconfig
View File

@ -10,7 +10,6 @@ config BOARD_IBM_E325
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY

1
src/mainboard/ibm/e326/Kconfig
View File

@ -10,7 +10,6 @@ config BOARD_IBM_E326
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY

1
src/mainboard/iei/pcisa-lx-800-r10/Kconfig
View File

@ -8,7 +8,6 @@ config BOARD_IEI_PCISA_LX_800_R10
select HAVE_PIRQ_TABLE
select PIRQ_ROUTE
select USE_DCACHE_RAM
select USE_PRINTK_IN_CAR
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR

1
src/mainboard/intel/d945gclf/Kconfig
View File

@ -37,7 +37,6 @@ config BOARD_INTEL_D945GCLF
select HAVE_ACPI_RESUME
select HAVE_MAINBOARD_RESOURCES
select MMCONF_SUPPORT
select USE_PRINTK_IN_CAR
select HAVE_ACPI_TABLES
select HAVE_SMI_HANDLER
select BOARD_ROMSIZE_KB_512

1
src/mainboard/intel/eagleheights/Kconfig
View File

@ -13,7 +13,6 @@ config BOARD_INTEL_EAGLEHEIGHTS
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select MMCONF_SUPPORT
select USE_PRINTK_IN_CAR
select UDELAY_TSC
select AP_IN_SIPI_WAIT
select HAVE_ACPI_TABLES

1
src/mainboard/iwill/dk8_htx/Kconfig
View File

@ -12,7 +12,6 @@ config BOARD_IWILL_DK8_HTX
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select LIFT_BSP_APIC_ID

1
src/mainboard/iwill/dk8s2/Kconfig
View File

@ -10,7 +10,6 @@ config BOARD_IWILL_DK8S2
select HAVE_PIRQ_TABLE
select HAVE_OPTION_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY

1
src/mainboard/iwill/dk8x/Kconfig
View File

@ -10,7 +10,6 @@ config BOARD_IWILL_DK8X
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY

1
src/mainboard/kontron/986lcd-m/Kconfig
View File

@ -15,7 +15,6 @@ config BOARD_KONTRON_986LCD_M
select HAVE_ACPI_RESUME
select HAVE_MAINBOARD_RESOURCES
select MMCONF_SUPPORT
select USE_PRINTK_IN_CAR
select HAVE_SMI_HANDLER
select BOARD_ROMSIZE_KB_1024
select USE_DCACHE_RAM

1
src/mainboard/kontron/kt690/Kconfig
View File

@ -14,7 +14,6 @@ config BOARD_KONTRON_KT690
select HAVE_MP_TABLE
select HAVE_MAINBOARD_RESOURCES
select GFXUMA
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select HAVE_ACPI_TABLES

1
src/mainboard/lippert/frontrunner/Kconfig
View File

@ -6,7 +6,6 @@ config BOARD_LIPPERT_FRONTRUNNER
select SOUTHBRIDGE_AMD_CS5535
select UDELAY_TSC
select USE_DCACHE_RAM
select USE_PRINTK_IN_CAR
select HAVE_PIRQ_TABLE
select BOARD_ROMSIZE_KB_256

1
src/mainboard/lippert/roadrunner-lx/Kconfig
View File

@ -9,7 +9,6 @@ config BOARD_LIPPERT_ROADRUNNER_LX
select PIRQ_ROUTE
select UDELAY_TSC
select USE_DCACHE_RAM
select USE_PRINTK_IN_CAR
select BOARD_ROMSIZE_KB_512
config MAINBOARD_DIR

1
src/mainboard/lippert/spacerunner-lx/Kconfig
View File

@ -9,7 +9,6 @@ config BOARD_LIPPERT_SPACERUNNER_LX
select PIRQ_ROUTE
select UDELAY_TSC
select USE_DCACHE_RAM
select USE_PRINTK_IN_CAR
select BOARD_ROMSIZE_KB_512
config MAINBOARD_DIR

1
src/mainboard/msi/ms7135/Kconfig
View File

@ -12,7 +12,6 @@ config BOARD_MSI_MS7135
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_DCACHE_RAM
select USE_PRINTK_IN_CAR
select BOARD_ROMSIZE_KB_512
config MAINBOARD_DIR

1
src/mainboard/msi/ms7260/Kconfig
View File

@ -10,7 +10,6 @@ config BOARD_MSI_MS7260
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select LIFT_BSP_APIC_ID

1
src/mainboard/msi/ms9185/Kconfig
View File

@ -11,7 +11,6 @@ config BOARD_MSI_MS9185
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select LIFT_BSP_APIC_ID

1
src/mainboard/msi/ms9282/Kconfig
View File

@ -10,7 +10,6 @@ config BOARD_MSI_MS9282
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select K8_REV_F_SUPPORT

1
src/mainboard/msi/ms9652_fam10/Kconfig
View File

@ -8,7 +8,6 @@ config BOARD_MSI_MS9652_FAM10
select HAVE_BUS_CONFIG
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_OPTION_TABLE
select HAVE_HARD_RESET

1
src/mainboard/newisys/khepri/Kconfig
View File

@ -10,7 +10,6 @@ config BOARD_NEWISYS_KHEPRI
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select BOARD_ROMSIZE_KB_512

1
src/mainboard/nvidia/l1_2pvv/Kconfig
View File

@ -10,7 +10,6 @@ config BOARD_NVIDIA_L1_2PVV
select HAVE_BUS_CONFIG
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select LIFT_BSP_APIC_ID

1
src/mainboard/olpc/btest/Kconfig
View File

@ -6,7 +6,6 @@ config BOARD_OLPC_BTEST
select SOUTHBRIDGE_AMD_CS5536
select UDELAY_TSC
select USE_DCACHE_RAM
select USE_PRINTK_IN_CAR
select HAVE_PIRQ_TABLE
select BOARD_ROMSIZE_KB_256

1
src/mainboard/olpc/rev_a/Kconfig
View File

@ -6,7 +6,6 @@ config BOARD_OLPC_REV_A
select SOUTHBRIDGE_AMD_CS5536
select UDELAY_TSC
select USE_DCACHE_RAM
select USE_PRINTK_IN_CAR
select HAVE_PIRQ_TABLE
select BOARD_ROMSIZE_KB_256

1
src/mainboard/pcengines/alix1c/Kconfig
View File

@ -9,7 +9,6 @@ config BOARD_PCENGINES_ALIX1C
select PIRQ_ROUTE
select UDELAY_TSC
select USE_DCACHE_RAM
select USE_PRINTK_IN_CAR
select BOARD_ROMSIZE_KB_512
config MAINBOARD_DIR

1
src/mainboard/rca/rm4100/Kconfig
View File

@ -10,7 +10,6 @@ config BOARD_RCA_RM4100
select BOARD_ROMSIZE_KB_1024
select HAVE_HARD_RESET
select HAVE_MAINBOARD_RESOURCES
select USE_PRINTK_IN_CAR
select HAVE_SMI_HANDLER
select GFXUMA
select USE_DCACHE_RAM

1
src/mainboard/roda/rk886ex/Kconfig
View File

@ -13,7 +13,6 @@ config BOARD_RODA_RK886EX
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select MMCONF_SUPPORT
select USE_PRINTK_IN_CAR
select HAVE_SMI_HANDLER
select HAVE_ACPI_TABLES
select HAVE_ACPI_RESUME

1
src/mainboard/sunw/ultra40/Kconfig
View File

@ -10,7 +10,6 @@ config BOARD_SUNW_ULTRA40
select HAVE_BUS_CONFIG
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select BOARD_ROMSIZE_KB_1024

1
src/mainboard/supermicro/h8dme/Kconfig
View File

@ -10,7 +10,6 @@ config BOARD_SUPERMICRO_H8DME
select HAVE_BUS_CONFIG
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
#select AP_CODE_IN_CAR

1
src/mainboard/supermicro/h8dmr/Kconfig
View File

@ -10,7 +10,6 @@ config BOARD_SUPERMICRO_H8DMR
select HAVE_BUS_CONFIG
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select LIFT_BSP_APIC_ID

1
src/mainboard/supermicro/h8dmr_fam10/Kconfig
View File

@ -9,7 +9,6 @@ config BOARD_SUPERMICRO_H8DMR_FAM10
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select LIFT_BSP_APIC_ID

1
src/mainboard/supermicro/h8qme_fam10/Kconfig
View File

@ -10,7 +10,6 @@ config BOARD_SUPERMICRO_H8QME_FAM10
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select LIFT_BSP_APIC_ID

1
src/mainboard/technexion/tim5690/Kconfig
View File

@ -12,7 +12,6 @@ config BOARD_TECHNEXION_TIM5690
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY

1
src/mainboard/technexion/tim8690/Kconfig
View File

@ -12,7 +12,6 @@ config BOARD_TECHNEXION_TIM8690
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY

1
src/mainboard/thomson/ip1000/Kconfig
View File

@ -10,7 +10,6 @@ config BOARD_THOMSON_IP1000
select BOARD_ROMSIZE_KB_512
select HAVE_HARD_RESET
select HAVE_MAINBOARD_RESOURCES
select USE_PRINTK_IN_CAR
select HAVE_SMI_HANDLER
select GFXUMA
select USE_DCACHE_RAM

1
src/mainboard/traverse/geos/Kconfig
View File

@ -8,7 +8,6 @@ config BOARD_TRAVERSE_GEOS
select PIRQ_ROUTE
select UDELAY_TSC
select USE_DCACHE_RAM
select USE_PRINTK_IN_CAR
select BOARD_ROMSIZE_KB_1024
config MAINBOARD_DIR

1
src/mainboard/tyan/s2735/Kconfig
View File

@ -15,7 +15,6 @@ config BOARD_TYAN_S2735
select USE_DCACHE_RAM
select USE_WATCHDOG_ON_BOOT
select BOARD_ROMSIZE_KB_512
select USE_PRINTK_IN_CAR
config MAINBOARD_DIR
string

1
src/mainboard/tyan/s2912/Kconfig
View File

@ -10,7 +10,6 @@ config BOARD_TYAN_S2912
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select LIFT_BSP_APIC_ID

1
src/mainboard/tyan/s2912_fam10/Kconfig
View File

@ -9,7 +9,6 @@ config BOARD_TYAN_S2912_FAM10
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select LIFT_BSP_APIC_ID

1
src/mainboard/tyan/s4880/Kconfig
View File

@ -10,7 +10,6 @@ config BOARD_TYAN_S4880
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select BOARD_ROMSIZE_KB_512

1
src/mainboard/tyan/s4882/Kconfig
View File

@ -10,7 +10,6 @@ config BOARD_TYAN_S4882
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select BOARD_ROMSIZE_KB_512

1
src/mainboard/winent/pl6064/Kconfig
View File

@ -9,7 +9,6 @@ config BOARD_WINENT_PL6064
select PIRQ_ROUTE
select UDELAY_TSC
select USE_DCACHE_RAM
select USE_PRINTK_IN_CAR
select BOARD_ROMSIZE_KB_512
config MAINBOARD_DIR

1
src/mainboard/wyse/s50/Kconfig
View File

@ -25,7 +25,6 @@ config BOARD_WYSE_S50
select SOUTHBRIDGE_AMD_CS5536
select UDELAY_TSC
select USE_DCACHE_RAM
select USE_PRINTK_IN_CAR
select HAVE_PIRQ_TABLE
select PIRQ_ROUTE
select BOARD_ROMSIZE_KB_256

32
src/northbridge/intel/e7501/debug.c
View File

@ -39,7 +39,7 @@ static void dump_pci_device(unsigned dev)
for(i = 0; i < 256; i++) {
unsigned char val;
if ((i & 0x0f) == 0) {
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "\n%02x:",i);
#else
print_debug("\n");
@ -48,7 +48,7 @@ static void dump_pci_device(unsigned dev)
#endif
}
val = pci_read_config8(dev, i);
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, " %02x", val);
#else
print_debug_char(' ');
@ -101,7 +101,7 @@ static inline void dump_spd_registers(const struct mem_controller *ctrl)
device = ctrl->channel0[i];
if (device) {
int j;
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "dimm: %02x.0: %02x", i, device);
#else
print_debug("dimm: ");
@ -113,7 +113,7 @@ static inline void dump_spd_registers(const struct mem_controller *ctrl)
int status;
unsigned char byte;
if ((j & 0xf) == 0) {
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "\n%02x: ", j);
#else
print_debug("\n");
@ -126,7 +126,7 @@ static inline void dump_spd_registers(const struct mem_controller *ctrl)
break;
}
byte = status & 0xff;
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "%02x ", byte);
#else
print_debug_hex8(byte);
@ -138,7 +138,7 @@ static inline void dump_spd_registers(const struct mem_controller *ctrl)
device = ctrl->channel1[i];
if (device) {
int j;
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "dimm: %02x.1: %02x", i, device);
#else
print_debug("dimm: ");
@ -150,7 +150,7 @@ static inline void dump_spd_registers(const struct mem_controller *ctrl)
int status;
unsigned char byte;
if ((j & 0xf) == 0) {
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "\n%02x: ", j);
#else
print_debug("\n");
@ -163,7 +163,7 @@ static inline void dump_spd_registers(const struct mem_controller *ctrl)
break;
}
byte = status & 0xff;
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "%02x ", byte);
#else
print_debug_hex8(byte);
@ -181,7 +181,7 @@ static inline void dump_smbus_registers(void)
for(device = 1; device < 0x80; device++) {
int j;
if( smbus_read_byte(device, 0) < 0 ) continue;
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "smbus: %02x", device);
#else
print_debug("smbus: ");
@ -195,7 +195,7 @@ static inline void dump_smbus_registers(void)
break;
}
if ((j & 0xf) == 0) {
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "\n%02x: ",j);
#else
print_debug("\n");
@ -204,7 +204,7 @@ static inline void dump_smbus_registers(void)
#endif
}
byte = status & 0xff;
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "%02x ", byte);
#else
print_debug_hex8(byte);
@ -219,7 +219,7 @@ static inline void dump_io_resources(unsigned port)
{
int i;
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "%04x:\n", port);
#else
print_debug_hex16(port);
@ -228,7 +228,7 @@ static inline void dump_io_resources(unsigned port)
for(i=0;i<256;i++) {
uint8_t val;
if ((i & 0x0f) == 0) {
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "%02x:", i);
#else
print_debug_hex8(i);
@ -236,7 +236,7 @@ static inline void dump_io_resources(unsigned port)
#endif
}
val = inb(port);
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, " %02x",val);
#else
print_debug_char(' ');
@ -255,7 +255,7 @@ static inline void dump_mem(unsigned start, unsigned end)
print_debug("dump_mem:");
for(i=start;i<end;i++) {
if((i & 0xf)==0) {
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, "\n%08x:", i);
#else
print_debug("\n");
@ -263,7 +263,7 @@ static inline void dump_mem(unsigned start, unsigned end)
print_debug(":");
#endif
}
#if CONFIG_USE_PRINTK_IN_CAR
#if CONFIG_USE_DCACHE_RAM
printk(BIOS_DEBUG, " %02x", (unsigned char)*((unsigned char *)i));
#else
print_debug(" ");

4
src/pc80/serial.c
View File

@ -28,7 +28,7 @@
#define UART_LCS CONFIG_TTYS0_LCS
#if CONFIG_USE_PRINTK_IN_CAR == 0
#if CONFIG_USE_DCACHE_RAM == 0
/* Data */
#define UART_RBR 0x00
@ -97,7 +97,7 @@ void uart_init(void)
}
#else
/* CONFIG_USE_PRINTK_IN_CAR == 1 */
/* CONFIG_USE_DCACHE_RAM == 1 */
extern void uart8250_init(unsigned base_port, unsigned divisor, unsigned lcs);
void uart_init(void)