Go to file
Stefan Reinauer 8c4f31b3b5 Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user /
board porter: printk should always be available in CAR mode.

Also drop CONFIG_USE_INIT, it's only been selected on one ASROCK board
but it's not been used there. Very odd.

There is one usage of CONFIG_USE_INIT which was always off in 
src/cpu/intel/car/cache_as_ram.inc and we have to figure out what to do with
those few lines.

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5682 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-03 15:42:29 +00:00
documentation Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user / 2010-08-03 15:42:29 +00:00
payloads Resolved the bug of filo+libpayload building. The bug is if libpayload is installed before filo load "make -C ../libpayload/Makefile DEST=**", it would not 2010-07-29 00:08:21 +00:00
src Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user / 2010-08-03 15:42:29 +00:00
util Adds id for ITE IT8707F to superiotool. 2010-08-02 02:34:20 +00:00
COPYING update license template. 2006-08-12 22:03:36 +00:00
Makefile Patrick Georgi wrote: 2010-05-08 17:15:36 +00:00
README Replace sconfig with a C implementation. 2010-04-08 11:37:43 +00:00

README

-------------------------------------------------------------------------------
coreboot README
-------------------------------------------------------------------------------

coreboot is a Free Software project aimed at replacing the proprietary
BIOS you can find in most of today's computers.

It performs just a little bit of hardware initialization and then executes
one of many possible payloads, e.g. a Linux kernel or a bootloader.


Payloads
--------

After the basic initialization of the hardware has been performed, any
desired "payload" can be started by coreboot.

See http://www.coreboot.org/Payloads for a list of supported payloads.


Supported Hardware
------------------

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

 * http://www.coreboot.org/Supported_Motherboards
 * http://www.coreboot.org/Supported_Chipsets_and_Devices


Build Requirements
------------------

 * gcc / g++
 * make

Optional:

 * doxygen (for generating/viewing documentation)
 * iasl (for targets with ACPI support)
 * gdb (for better debugging facilities on some targets)
 * ncurses (for 'make menuconfig')
 * flex and bison (for regenerating parsers)


Building coreboot
-----------------

Please consult http://www.coreboot.org/Build_HOWTO for details.


Testing coreboot Without Modifying Your Hardware
-------------------------------------------------

If you want to test coreboot without any risks before you really decide
to use it on your hardware, you can use the QEMU system emulator to run
coreboot virtually in QEMU.

Please see http://www.coreboot.org/QEMU for details.


Website and Mailing List
------------------------

Further details on the project, a FAQ, many HOWTOs, news, development
guidelines and more can be found on the coreboot website:

  http://www.coreboot.org

You can contact us directly on the coreboot mailing list:

  http://www.coreboot.org/Mailinglist


Copyright and License
---------------------

The copyright on coreboot is owned by quite a large number of individual
developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL).
Some files are licensed under the "GPL (version 2, or any later version)",
and some files are licensed under the "GPL, version 2". For some parts, which
were derived from other projects, other (GPL-compatible) licenses may apply.
Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.