mb/google/brya: Implement SLP_S0_GATE signal

The SLP_S0_GATE# signal is used in conjunction with the PCH's SLP_S0# to
provide an indication to the rest of the platform when the system is
entering its software-initiated low-power state (i.e. S0ix). This lets
the platform distinguish between opportunistic S0ix entry and the runtime
suspend mechanism.

BUG=b:180401723
TEST=abuild

Change-Id: I7fe2e3707465778baf56283617a8485a94f2dbca
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50881
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

src/mainboard/google/brya/dsdt.asl

@@ -22,6 +22,8 @@ DefinitionBlock(
 	#include <cpu/intel/common/acpi/cpu.asl>
 
 	Scope (\_SB) {
+		#include "mainboard.asl"
+
 		Device (PCI0)
 		{
 			#include <soc/intel/common/block/acpi/acpi/northbridge.asl>

src/mainboard/google/brya/mainboard.asl

@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <baseboard/gpio.h>
+
+/*
+ * S0ix Entry/Exit Notifications
+ * Called from \_SB.PEPD._DSM
+ */
+Method (MS0X, 1, Serialized)
+{
+	If (Arg0 == 1) {
+		/*
+		 * On S0ix entry, clear the SLP_S0_GATE pin, so that the rest of
+		 * the platform can transition to its low power state as well.
+		 */
+		\_SB.PCI0.CTXS(GPIO_SLP_S0_GATE);
+	} Else {
+		/*
+		 * On S0ix exit, set the SLP_S0_GATE pin, so that the rest of
+		 * the platform will resume from its low power state.
+		 */
+		\_SB.PCI0.STXS(GPIO_SLP_S0_GATE);
+	}
+}

src/mainboard/google/brya/variants/baseboard/include/baseboard/gpio.h

@@ -7,12 +7,14 @@
 #include <soc/gpio.h>
 
 /* eSPI virtual wire reporting */
-#define EC_SCI_GPI	GPE0_ESPI
+#define EC_SCI_GPI		GPE0_ESPI
 /* EC wake is EC_PCH_INT which is routed to GPP_F17 pin */
-#define GPE_EC_WAKE	GPE0_DW2_17
+#define GPE_EC_WAKE		GPE0_DW2_17
 /* WP signal to PCH */
-#define GPIO_PCH_WP	GPP_E15
+#define GPIO_PCH_WP		GPP_E15
 /* EC in RW or RO */
-#define GPIO_EC_IN_RW	GPP_F18
+#define GPIO_EC_IN_RW		GPP_F18
+/* Used to gate SoC's SLP_S0# signal */
+#define GPIO_SLP_S0_GATE	GPP_F9
 
 #endif /* __BASEBOARD_GPIO_H__ */