soc/mediatek/mt8192: Init DPM
DPM is a hardware module for DRAM power management and for better power saving in low power mode. BUG=none TEST=Boots correctly on Asurada Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: I16b341ad63940b45b886c4a7fd733c1970624e40 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46393 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
parent
344f68be10
commit
916e2efad4
|
@ -4,6 +4,7 @@
|
|||
#include <console/console.h>
|
||||
#include <device/device.h>
|
||||
#include <device/mmio.h>
|
||||
#include <soc/dpm.h>
|
||||
#include <soc/gpio.h>
|
||||
#include <soc/regulator.h>
|
||||
#include <soc/spm.h>
|
||||
|
@ -109,6 +110,9 @@ static void mainboard_init(struct device *dev)
|
|||
|
||||
register_reset_to_bl31();
|
||||
|
||||
if (dpm_init())
|
||||
printk(BIOS_ERR, "dpm init fail, system can't do DVFS switch\n");
|
||||
|
||||
if (spm_init())
|
||||
printk(BIOS_ERR, "spm init fail, system suspend may stuck\n");
|
||||
}
|
||||
|
|
|
@ -45,6 +45,18 @@ config MEMORY_TEST
|
|||
This option enables memory basic compare test to verify the DRAM read
|
||||
or write is as expected.
|
||||
|
||||
config DPM_DM_FIRMWARE
|
||||
string
|
||||
default "dpm.dm"
|
||||
help
|
||||
The file name of the MediaTek DPM DM firmware
|
||||
|
||||
config DPM_PM_FIRMWARE
|
||||
string
|
||||
default "dpm.pm"
|
||||
help
|
||||
The file name of the MediaTek DPM PM firmware
|
||||
|
||||
config MCUPM_FIRMWARE
|
||||
string
|
||||
default "mcupm.bin"
|
||||
|
|
|
@ -35,6 +35,7 @@ romstage-y += pmif.c pmif_clk.c pmif_spi.c pmif_spmi.c
|
|||
romstage-y += mt6359p.c
|
||||
|
||||
ramstage-y += ../common/auxadc.c
|
||||
ramstage-y += dpm.c
|
||||
ramstage-y += flash_controller.c
|
||||
ramstage-y += ../common/gpio.c gpio.c
|
||||
ramstage-y += emi.c
|
||||
|
@ -52,6 +53,8 @@ ramstage-y += ../common/usb.c usb.c
|
|||
MT8192_BLOB_DIR := 3rdparty/blobs/soc/mediatek/mt8192
|
||||
|
||||
mcu-firmware-files := \
|
||||
$(CONFIG_DPM_DM_FIRMWARE) \
|
||||
$(CONFIG_DPM_PM_FIRMWARE) \
|
||||
$(CONFIG_MCUPM_FIRMWARE) \
|
||||
$(CONFIG_SPM_FIRMWARE)
|
||||
|
||||
|
|
|
@ -0,0 +1,48 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-only */
|
||||
|
||||
#include <console/console.h>
|
||||
#include <device/mmio.h>
|
||||
#include <soc/dpm.h>
|
||||
#include <soc/mcu_common.h>
|
||||
#include <soc/symbols.h>
|
||||
|
||||
static void reset_dpm(struct mtk_mcu *mcu)
|
||||
{
|
||||
/* write bootargs */
|
||||
write32(&mtk_dpm->twam_window_len, 0x0);
|
||||
write32(&mtk_dpm->twam_mon_type, 0x0);
|
||||
|
||||
/* free RST */
|
||||
setbits32(&mtk_dpm->sw_rstn, DPM_SW_RSTN_RESET);
|
||||
}
|
||||
|
||||
static struct mtk_mcu dpm_mcu[] = {
|
||||
{
|
||||
.firmware_name = CONFIG_DPM_DM_FIRMWARE,
|
||||
.run_address = (void *)DPM_DM_SRAM_BASE,
|
||||
},
|
||||
{
|
||||
.firmware_name = CONFIG_DPM_PM_FIRMWARE,
|
||||
.run_address = (void *)DPM_PM_SRAM_BASE,
|
||||
.reset = reset_dpm,
|
||||
},
|
||||
};
|
||||
|
||||
int dpm_init(void)
|
||||
{
|
||||
int i;
|
||||
struct mtk_mcu *dpm;
|
||||
|
||||
/* config DPM SRAM layout */
|
||||
clrsetbits32(&mtk_dpm->sw_rstn, DPM_MEM_RATIO_MASK, DPM_MEM_RATIO_CFG1);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(dpm_mcu); i++) {
|
||||
dpm = &dpm_mcu[i];
|
||||
dpm->load_buffer = _dram_dma;
|
||||
dpm->buffer_size = REGION_SIZE(dram_dma);
|
||||
if (mtk_init_mcu(dpm))
|
||||
return -1;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
|
@ -27,6 +27,9 @@ enum {
|
|||
PMIF_SPMI_BASE = IO_PHYS + 0x00027000,
|
||||
PMICSPI_MST_BASE = IO_PHYS + 0x00028000,
|
||||
SPMI_MST_BASE = IO_PHYS + 0x00029000,
|
||||
DPM_PM_SRAM_BASE = IO_PHYS + 0x00900000,
|
||||
DPM_DM_SRAM_BASE = IO_PHYS + 0x00920000,
|
||||
DPM_CFG_BASE = IO_PHYS + 0x00940000,
|
||||
AUXADC_BASE = IO_PHYS + 0x01001000,
|
||||
UART0_BASE = IO_PHYS + 0x01002000,
|
||||
SPI0_BASE = IO_PHYS + 0x0100A000,
|
||||
|
|
|
@ -0,0 +1,49 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-only */
|
||||
|
||||
#ifndef __SOC_MEDIATEK_MT8192_DPM_H__
|
||||
#define __SOC_MEDIATEK_MT8192_DPM_H__
|
||||
|
||||
#include <soc/addressmap.h>
|
||||
#include <stdint.h>
|
||||
#include <types.h>
|
||||
|
||||
struct dpm_regs {
|
||||
u32 sw_rstn;
|
||||
u32 rsvd_0[3072];
|
||||
u32 mclk_div;
|
||||
u32 rsvd_1[3071];
|
||||
u32 twam_window_len;
|
||||
u32 twam_mon_type;
|
||||
u32 rsvd_2[1022];
|
||||
u32 low_power_cfg_0;
|
||||
u32 low_power_cfg_1;
|
||||
u32 rsvd_3[1];
|
||||
u32 fsm_out_ctrl_0;
|
||||
u32 rsvd_4[8];
|
||||
u32 fsm_cfg_1;
|
||||
u32 low_power_cfg_3;
|
||||
u32 dfd_dbug_0;
|
||||
u32 rsvd_5[28];
|
||||
u32 status_4;
|
||||
};
|
||||
|
||||
check_member(dpm_regs, mclk_div, 0x3004);
|
||||
check_member(dpm_regs, twam_window_len, 0x6004);
|
||||
check_member(dpm_regs, low_power_cfg_0, 0x7004);
|
||||
check_member(dpm_regs, low_power_cfg_1, 0x7008);
|
||||
check_member(dpm_regs, fsm_out_ctrl_0, 0x7010);
|
||||
check_member(dpm_regs, fsm_cfg_1, 0x7034);
|
||||
check_member(dpm_regs, low_power_cfg_3, 0x7038);
|
||||
check_member(dpm_regs, dfd_dbug_0, 0x703C);
|
||||
check_member(dpm_regs, status_4, 0x70B0);
|
||||
|
||||
#define DPM_SW_RSTN_RESET BIT(0)
|
||||
#define DPM_MEM_RATIO_OFFSET 28
|
||||
#define DPM_MEM_RATIO_MASK (0x3 << DPM_MEM_RATIO_OFFSET)
|
||||
#define DPM_MEM_RATIO_CFG1 (1 << DPM_MEM_RATIO_OFFSET)
|
||||
|
||||
static struct dpm_regs *const mtk_dpm = (void *)DPM_CFG_BASE;
|
||||
|
||||
int dpm_init(void);
|
||||
|
||||
#endif /* __SOC_MEDIATEK_MT8192_DPM_H__ */
|
Loading…
Reference in New Issue