mb/google/brya: Set WWAN_PCIE_WAKE_ODL as interrupt on Redrix

This signal gets deasserted by the WWAN modem to reactivate the PCIe
link when in low power mode. In order to handle this efficiently, the
kernel needs to set up an interrupt.

BUG=b:301150499
TEST=Compiled and tested on google/redrix

Signed-off-by: Paweł Anikiel <panikiel@google.com>
Change-Id: I37f6836aefe4a374eaff3e4bc11358be274cf563
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78416
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This commit is contained in:
Paweł Anikiel 2023-10-16 14:34:06 +00:00 committed by Jakub Czapiga
parent 41ce3a57d6
commit 97cd5bdeae
2 changed files with 2 additions and 2 deletions

View File

@ -19,7 +19,7 @@ static const struct pad_config gpio_table[] = {
/* A6 : ESPI_ALERT1# ==> SPKR_INT_L */
PAD_CFG_GPI(GPP_A6, NONE, DEEP),
/* A7 : SRCCLK_OE7# ==> WWAN_PCIE_WAKE_ODL */
PAD_CFG_GPI_APIC(GPP_A7, NONE, PLTRST, LEVEL, INVERT),
PAD_CFG_GPI_INT(GPP_A7, NONE, PLTRST, EDGE_SINGLE),
/* A8 : SRCCLKREQ7# ==> WWAN_RF_DISABLE_ODL */
PAD_CFG_GPO(GPP_A8, 1, DEEP),
/* A9 : ESPI_CLK ==> ESPI_CLK */

View File

@ -238,7 +238,7 @@ chip soc/intel/alderlake
register "fcpo_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_F21)"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E16)"
register "perst_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E0)"
register "wake_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A7)"
register "wake_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPP_A7)"
register "add_acpi_dma_property" = "true"
use rp6_rtd3 as rtd3dev
device generic 0 alias rp6_wwan on