GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mb/google/nissa/var/joxer: enable ELAN and G2touch touchscreen 

Update overridetree to support ELAN and G2_G7500 touchscreen.

BUG=b:285477026
TEST=emerge-nissa coreboot and check touchscreen function

Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I236a2815f956929c6cd84c981cb15e9ab0f657b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75762
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
Mark Hsieh 2023-06-16 19:16:02 +08:00 committed by Felix Held
parent 9e0f964af5
commit aec6f06a52
2 changed files with 57 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
src/mainboard/google/brya/variants/joxer/gpio.c
View File

@ -17,6 +17,9 @@ static const struct pad_config override_gpio_table[] = {
/* B6 : SOC_I2C_SUB_SCL ==> NC */ /* B6 : SOC_I2C_SUB_SCL ==> NC */
PAD_NC_LOCK(GPP_B6, NONE, LOCK_CONFIG), PAD_NC_LOCK(GPP_B6, NONE, LOCK_CONFIG),
/* C1 : SMBDATA ==> TCHSCR_RST_L */
PAD_CFG_GPO(GPP_C1, 1, DEEP),
/* D3 : WCAM_RST_L ==> NC */ /* D3 : WCAM_RST_L ==> NC */
PAD_NC_LOCK(GPP_D3, NONE, LOCK_CONFIG), PAD_NC_LOCK(GPP_D3, NONE, LOCK_CONFIG),
/* D15 : EN_PP2800_WCAM_X ==> NC */ /* D15 : EN_PP2800_WCAM_X ==> NC */
@ -78,6 +81,11 @@ static const struct pad_config early_gpio_table[] = {
}; };
static const struct pad_config romstage_gpio_table[] = { static const struct pad_config romstage_gpio_table[] = {
/* Enable touchscreen, hold in reset */
/* C0 : SMBCLK ==> EN_PP3300_TCHSCR_X */
PAD_CFG_GPO(GPP_C0, 1, DEEP),
/* C1 : SMBDATA ==> TCHSCR_RST_L */
PAD_CFG_GPO(GPP_C1, 0, DEEP),
/* H12 : UART0_RTS# ==> SD_PERST_L */ /* H12 : UART0_RTS# ==> SD_PERST_L */
PAD_CFG_GPO(GPP_H12, 1, DEEP), PAD_CFG_GPO(GPP_H12, 1, DEEP),
/* H20 : IMGCLKOUT1 ==> WLAN_PERST_L */ /* H20 : IMGCLKOUT1 ==> WLAN_PERST_L */

50
src/mainboard/google/brya/variants/joxer/overridetree.cb
View File

@ -133,11 +133,59 @@ chip soc/intel/alderlake
end end
end end
device ref i2c1 on device ref i2c1 on
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
register "detect" = "1"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
register "reset_delay_ms" = "20"
register "reset_off_delay_ms" = "2"
register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
register "stop_delay_ms" = "280"
register "stop_off_delay_ms" = "2"
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
register "enable_delay_ms" = "1"
register "has_power_resource" = "1"
device i2c 10 on end
end
chip drivers/i2c/hid
register "generic.hid" = ""ELAN2513""
register "generic.desc" = ""ELAN Touchscreen""
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
register "generic.detect" = "1"
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
register "generic.reset_delay_ms" = "20"
register "generic.reset_off_delay_ms" = "2"
register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
register "generic.stop_delay_ms" = "280"
register "generic.stop_off_delay_ms" = "2"
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
register "generic.enable_delay_ms" = "1"
register "generic.has_power_resource" = "1"
register "hid_desc_reg_offset" = "0x01"
device i2c 15 on end
end
chip drivers/i2c/hid
register "generic.hid" = ""GTCH7503""
register "generic.desc" = ""G2TOUCH Touchscreen""
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
register "generic.detect" = "1"
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
register "generic.reset_delay_ms" = "50"
register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
register "generic.stop_delay_ms" = "30"
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
register "generic.enable_delay_ms" = "1"
register "generic.has_power_resource" = "1"
register "hid_desc_reg_offset" = "0x01"
device i2c 40 on end
end
chip drivers/i2c/hid chip drivers/i2c/hid
register "generic.hid" = ""GDIX0000"" register "generic.hid" = ""GDIX0000""
register "generic.desc" = ""Goodix Touchscreen"" register "generic.desc" = ""Goodix Touchscreen""
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)" register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
register "generic.probed" = "1" register "generic.detect" = "1"
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
register "generic.enable_delay_ms" = "20" register "generic.enable_delay_ms" = "20"
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)" register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"