soc/intel/baytrail: Use sb/intel/common/spi.c
This common implementation is compatible. Change-Id: I2023bb7522ec40f1d9911cb5c57d7d66e4cefa6d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33206 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
This commit is contained in:
Arthur Heymans
Patrick Georgi
parent
4ff63d3a11
commit
b48d63359b
|
|
@ -18,6 +18,7 @@ config CPU_SPECIFIC_OPTIONS
|
||||||
select SUPPORT_CPU_UCODE_IN_CBFS
|
select SUPPORT_CPU_UCODE_IN_CBFS
|
||||||
select HAVE_SMI_HANDLER
|
select HAVE_SMI_HANDLER
|
||||||
select SOUTHBRIDGE_INTEL_COMMON_RESET
|
select SOUTHBRIDGE_INTEL_COMMON_RESET
|
||||||
|
select SOUTHBRIDGE_INTEL_COMMON_SPI_SILVERMONT
|
||||||
select NO_FIXED_XIP_ROM_SIZE
|
select NO_FIXED_XIP_ROM_SIZE
|
||||||
select PARALLEL_MP
|
select PARALLEL_MP
|
||||||
select PCIEXP_ASPM
|
select PCIEXP_ASPM
|
||||||
|
|
|
||||||
|
|
@ -12,12 +12,10 @@ subdirs-y += ../../../cpu/intel/common
|
||||||
romstage-y += iosf.c
|
romstage-y += iosf.c
|
||||||
romstage-y += memmap.c
|
romstage-y += memmap.c
|
||||||
romstage-y += pmutil.c
|
romstage-y += pmutil.c
|
||||||
romstage-y += spi.c
|
|
||||||
romstage-y += tsc_freq.c
|
romstage-y += tsc_freq.c
|
||||||
|
|
||||||
postcar-y += iosf.c
|
postcar-y += iosf.c
|
||||||
postcar-y += memmap.c
|
postcar-y += memmap.c
|
||||||
postcar-y += spi.c
|
|
||||||
postcar-y += tsc_freq.c
|
postcar-y += tsc_freq.c
|
||||||
|
|
||||||
ramstage-y += acpi.c
|
ramstage-y += acpi.c
|
||||||
|
|
@ -43,7 +41,6 @@ ramstage-y += scc.c
|
||||||
ramstage-y += sd.c
|
ramstage-y += sd.c
|
||||||
ramstage-y += smm.c
|
ramstage-y += smm.c
|
||||||
ramstage-y += southcluster.c
|
ramstage-y += southcluster.c
|
||||||
ramstage-y += spi.c
|
|
||||||
ramstage-y += tsc_freq.c
|
ramstage-y += tsc_freq.c
|
||||||
ramstage-y += xhci.c
|
ramstage-y += xhci.c
|
||||||
ramstage-$(CONFIG_ELOG) += elog.c
|
ramstage-$(CONFIG_ELOG) += elog.c
|
||||||
|
|
@ -52,7 +49,6 @@ ramstage-$(CONFIG_HAVE_REFCODE_BLOB) += refcode.c
|
||||||
smm-y += iosf.c
|
smm-y += iosf.c
|
||||||
smm-y += pmutil.c
|
smm-y += pmutil.c
|
||||||
smm-y += smihandler.c
|
smm-y += smihandler.c
|
||||||
smm-y += spi.c
|
|
||||||
smm-y += tsc_freq.c
|
smm-y += tsc_freq.c
|
||||||
|
|
||||||
# Remove as ramstage gets fleshed out
|
# Remove as ramstage gets fleshed out
|
||||||
|
|
|
||||||
|
|
@ -20,14 +20,7 @@
|
||||||
|
|
||||||
/* These registers live behind SPI_BASE_ADDRESS. */
|
/* These registers live behind SPI_BASE_ADDRESS. */
|
||||||
#define HSFSTS 0x04
|
#define HSFSTS 0x04
|
||||||
#define FDATA0 0x10
|
|
||||||
# define FLOCKDN (0x1 << 15)
|
# define FLOCKDN (0x1 << 15)
|
||||||
#define SSFS 0x90
|
|
||||||
# define CYCLE_DONE_STATUS (0x1 << 2)
|
|
||||||
# define FLASH_CYCLE_ERROR (0x1 << 3)
|
|
||||||
#define SSFC 0x91
|
|
||||||
# define SPI_CYCLE_GO (0x1 << 1)
|
|
||||||
# define DATA_CYCLE (0x1 << 14)
|
|
||||||
#define PREOP 0x94
|
#define PREOP 0x94
|
||||||
#define OPTYPE 0x96
|
#define OPTYPE 0x96
|
||||||
#define OPMENU0 0x98
|
#define OPMENU0 0x98
|
||||||
|
|
|
||||||
|
|
@ -1,600 +0,0 @@
|
||||||
/*
|
|
||||||
* Copyright (c) 2013 Google Inc.
|
|
||||||
*
|
|
||||||
* This program is free software; you can redistribute it and/or
|
|
||||||
* modify it under the terms of the GNU General Public License as
|
|
||||||
* published by the Free Software Foundation; either version 2 of
|
|
||||||
* the License, or (at your option) any later version.
|
|
||||||
*
|
|
||||||
* This program is distributed in the hope that it will be useful,
|
|
||||||
* but without any warranty; without even the implied warranty of
|
|
||||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
* GNU General Public License for more details.
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* This file is derived from the flashrom project. */
|
|
||||||
|
|
||||||
#include <stdint.h>
|
|
||||||
#include <stdlib.h>
|
|
||||||
#include <bootstate.h>
|
|
||||||
#include <delay.h>
|
|
||||||
#include <device/mmio.h>
|
|
||||||
#include <device/pci_ops.h>
|
|
||||||
#include <commonlib/helpers.h>
|
|
||||||
#include <console/console.h>
|
|
||||||
#include <device/device.h>
|
|
||||||
#include <device/pci.h>
|
|
||||||
#include <spi_flash.h>
|
|
||||||
#include <spi-generic.h>
|
|
||||||
|
|
||||||
#include <soc/lpc.h>
|
|
||||||
#include <soc/pci_devs.h>
|
|
||||||
|
|
||||||
typedef struct spi_slave ich_spi_slave;
|
|
||||||
|
|
||||||
static int ichspi_lock = 0;
|
|
||||||
|
|
||||||
typedef struct ich9_spi_regs {
|
|
||||||
uint32_t bfpr;
|
|
||||||
uint16_t hsfs;
|
|
||||||
uint16_t hsfc;
|
|
||||||
uint32_t faddr;
|
|
||||||
uint32_t _reserved0;
|
|
||||||
uint32_t fdata[16];
|
|
||||||
uint32_t frap;
|
|
||||||
uint32_t freg[5];
|
|
||||||
uint32_t _reserved1[3];
|
|
||||||
uint32_t pr[5];
|
|
||||||
uint32_t _reserved2[2];
|
|
||||||
uint8_t ssfs;
|
|
||||||
uint8_t ssfc[3];
|
|
||||||
uint16_t preop;
|
|
||||||
uint16_t optype;
|
|
||||||
uint8_t opmenu[8];
|
|
||||||
uint32_t bbar;
|
|
||||||
uint8_t _reserved3[12];
|
|
||||||
uint32_t fdoc;
|
|
||||||
uint32_t fdod;
|
|
||||||
uint8_t _reserved4[8];
|
|
||||||
uint32_t afc;
|
|
||||||
uint32_t lvscc;
|
|
||||||
uint32_t uvscc;
|
|
||||||
uint8_t _reserved5[4];
|
|
||||||
uint32_t fpb;
|
|
||||||
uint8_t _reserved6[28];
|
|
||||||
uint32_t srdl;
|
|
||||||
uint32_t srdc;
|
|
||||||
uint32_t srd;
|
|
||||||
} __packed ich9_spi_regs;
|
|
||||||
|
|
||||||
typedef struct ich_spi_controller {
|
|
||||||
int locked;
|
|
||||||
|
|
||||||
uint8_t *opmenu;
|
|
||||||
int menubytes;
|
|
||||||
uint16_t *preop;
|
|
||||||
uint16_t *optype;
|
|
||||||
uint32_t *addr;
|
|
||||||
uint8_t *data;
|
|
||||||
unsigned int databytes;
|
|
||||||
uint8_t *status;
|
|
||||||
uint16_t *control;
|
|
||||||
uint32_t *bbar;
|
|
||||||
} ich_spi_controller;
|
|
||||||
|
|
||||||
static ich_spi_controller cntlr;
|
|
||||||
|
|
||||||
enum {
|
|
||||||
SPIS_SCIP = 0x0001,
|
|
||||||
SPIS_GRANT = 0x0002,
|
|
||||||
SPIS_CDS = 0x0004,
|
|
||||||
SPIS_FCERR = 0x0008,
|
|
||||||
SSFS_AEL = 0x0010,
|
|
||||||
SPIS_LOCK = 0x8000,
|
|
||||||
SPIS_RESERVED_MASK = 0x7ff0,
|
|
||||||
SSFS_RESERVED_MASK = 0x7fe2
|
|
||||||
};
|
|
||||||
|
|
||||||
enum {
|
|
||||||
SPIC_SCGO = 0x000002,
|
|
||||||
SPIC_ACS = 0x000004,
|
|
||||||
SPIC_SPOP = 0x000008,
|
|
||||||
SPIC_DBC = 0x003f00,
|
|
||||||
SPIC_DS = 0x004000,
|
|
||||||
SPIC_SME = 0x008000,
|
|
||||||
SSFC_SCF_MASK = 0x070000,
|
|
||||||
SSFC_RESERVED = 0xf80000
|
|
||||||
};
|
|
||||||
|
|
||||||
enum {
|
|
||||||
HSFS_FDONE = 0x0001,
|
|
||||||
HSFS_FCERR = 0x0002,
|
|
||||||
HSFS_AEL = 0x0004,
|
|
||||||
HSFS_BERASE_MASK = 0x0018,
|
|
||||||
HSFS_BERASE_SHIFT = 3,
|
|
||||||
HSFS_SCIP = 0x0020,
|
|
||||||
HSFS_FDOPSS = 0x2000,
|
|
||||||
HSFS_FDV = 0x4000,
|
|
||||||
HSFS_FLOCKDN = 0x8000
|
|
||||||
};
|
|
||||||
|
|
||||||
enum {
|
|
||||||
HSFC_FGO = 0x0001,
|
|
||||||
HSFC_FCYCLE_MASK = 0x0006,
|
|
||||||
HSFC_FCYCLE_SHIFT = 1,
|
|
||||||
HSFC_FDBC_MASK = 0x3f00,
|
|
||||||
HSFC_FDBC_SHIFT = 8,
|
|
||||||
HSFC_FSMIE = 0x8000
|
|
||||||
};
|
|
||||||
|
|
||||||
enum {
|
|
||||||
SPI_OPCODE_TYPE_READ_NO_ADDRESS = 0,
|
|
||||||
SPI_OPCODE_TYPE_WRITE_NO_ADDRESS = 1,
|
|
||||||
SPI_OPCODE_TYPE_READ_WITH_ADDRESS = 2,
|
|
||||||
SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS = 3
|
|
||||||
};
|
|
||||||
|
|
||||||
#if CONFIG(DEBUG_SPI_FLASH)
|
|
||||||
|
|
||||||
static u8 readb_(const void *addr)
|
|
||||||
{
|
|
||||||
u8 v = read8((unsigned long)addr);
|
|
||||||
printk(BIOS_DEBUG, "read %2.2x from %4.4x\n",
|
|
||||||
v, ((unsigned int) addr & 0xffff) - 0xf020);
|
|
||||||
return v;
|
|
||||||
}
|
|
||||||
|
|
||||||
static u16 readw_(const void *addr)
|
|
||||||
{
|
|
||||||
u16 v = read16((unsigned long)addr);
|
|
||||||
printk(BIOS_DEBUG, "read %4.4x from %4.4x\n",
|
|
||||||
v, ((unsigned int) addr & 0xffff) - 0xf020);
|
|
||||||
return v;
|
|
||||||
}
|
|
||||||
|
|
||||||
static u32 readl_(const void *addr)
|
|
||||||
{
|
|
||||||
u32 v = read32((unsigned long)addr);
|
|
||||||
printk(BIOS_DEBUG, "read %8.8x from %4.4x\n",
|
|
||||||
v, ((unsigned int) addr & 0xffff) - 0xf020);
|
|
||||||
return v;
|
|
||||||
}
|
|
||||||
|
|
||||||
static void writeb_(u8 b, void *addr)
|
|
||||||
{
|
|
||||||
write8(addr, b);
|
|
||||||
printk(BIOS_DEBUG, "wrote %2.2x to %4.4x\n",
|
|
||||||
b, ((unsigned int) addr & 0xffff) - 0xf020);
|
|
||||||
}
|
|
||||||
|
|
||||||
static void writew_(u16 b, void *addr)
|
|
||||||
{
|
|
||||||
write16(addr, b);
|
|
||||||
printk(BIOS_DEBUG, "wrote %4.4x to %4.4x\n",
|
|
||||||
b, ((unsigned int) addr & 0xffff) - 0xf020);
|
|
||||||
}
|
|
||||||
|
|
||||||
static void writel_(u32 b, void *addr)
|
|
||||||
{
|
|
||||||
write32(addr, b);
|
|
||||||
printk(BIOS_DEBUG, "wrote %8.8x to %4.4x\n",
|
|
||||||
b, ((unsigned int) addr & 0xffff) - 0xf020);
|
|
||||||
}
|
|
||||||
|
|
||||||
#else /* CONFIG_DEBUG_SPI_FLASH ^^^ enabled vvv NOT enabled */
|
|
||||||
|
|
||||||
#define readb_(a) read8(a)
|
|
||||||
#define readw_(a) read16(a)
|
|
||||||
#define readl_(a) read32(a)
|
|
||||||
#define writeb_(val, addr) write8(addr, val)
|
|
||||||
#define writew_(val, addr) write16(addr, val)
|
|
||||||
#define writel_(val, addr) write32(addr, val)
|
|
||||||
|
|
||||||
#endif /* CONFIG_DEBUG_SPI_FLASH ^^^ NOT enabled */
|
|
||||||
|
|
||||||
static void write_reg(const void *value, void *dest, uint32_t size)
|
|
||||||
{
|
|
||||||
const uint8_t *bvalue = value;
|
|
||||||
uint8_t *bdest = dest;
|
|
||||||
|
|
||||||
while (size >= 4) {
|
|
||||||
writel_(*(const uint32_t *)bvalue, bdest);
|
|
||||||
bdest += 4; bvalue += 4; size -= 4;
|
|
||||||
}
|
|
||||||
while (size) {
|
|
||||||
writeb_(*bvalue, bdest);
|
|
||||||
bdest++; bvalue++; size--;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
static void read_reg(const void *src, void *value, uint32_t size)
|
|
||||||
{
|
|
||||||
const uint8_t *bsrc = src;
|
|
||||||
uint8_t *bvalue = value;
|
|
||||||
|
|
||||||
while (size >= 4) {
|
|
||||||
*(uint32_t *)bvalue = readl_(bsrc);
|
|
||||||
bsrc += 4; bvalue += 4; size -= 4;
|
|
||||||
}
|
|
||||||
while (size) {
|
|
||||||
*bvalue = readb_(bsrc);
|
|
||||||
bsrc++; bvalue++; size--;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
static void ich_set_bbar(uint32_t minaddr)
|
|
||||||
{
|
|
||||||
const uint32_t bbar_mask = 0x00ffff00;
|
|
||||||
uint32_t ichspi_bbar;
|
|
||||||
|
|
||||||
minaddr &= bbar_mask;
|
|
||||||
ichspi_bbar = readl_(cntlr.bbar) & ~bbar_mask;
|
|
||||||
ichspi_bbar |= minaddr;
|
|
||||||
writel_(ichspi_bbar, cntlr.bbar);
|
|
||||||
}
|
|
||||||
|
|
||||||
static ich9_spi_regs *spi_regs(void)
|
|
||||||
{
|
|
||||||
uint32_t sbase;
|
|
||||||
|
|
||||||
#ifdef __SIMPLE_DEVICE__
|
|
||||||
pci_devfn_t dev = PCI_DEV(0, LPC_DEV, LPC_FUNC);
|
|
||||||
#else
|
|
||||||
struct device *dev = pcidev_on_root(LPC_DEV, LPC_FUNC);
|
|
||||||
#endif
|
|
||||||
sbase = pci_read_config32(dev, SBASE);
|
|
||||||
sbase &= ~0x1ff;
|
|
||||||
|
|
||||||
return (void *)sbase;
|
|
||||||
}
|
|
||||||
|
|
||||||
#define MENU_BYTES member_size(struct ich9_spi_regs, opmenu)
|
|
||||||
|
|
||||||
void spi_init(void)
|
|
||||||
{
|
|
||||||
ich9_spi_regs *ich9_spi = spi_regs();
|
|
||||||
|
|
||||||
ichspi_lock = readw_(&ich9_spi->hsfs) & HSFS_FLOCKDN;
|
|
||||||
cntlr.opmenu = ich9_spi->opmenu;
|
|
||||||
cntlr.menubytes = sizeof(ich9_spi->opmenu);
|
|
||||||
cntlr.optype = &ich9_spi->optype;
|
|
||||||
cntlr.addr = &ich9_spi->faddr;
|
|
||||||
cntlr.data = (uint8_t *)ich9_spi->fdata;
|
|
||||||
cntlr.databytes = sizeof(ich9_spi->fdata);
|
|
||||||
cntlr.status = &ich9_spi->ssfs;
|
|
||||||
cntlr.control = (uint16_t *)ich9_spi->ssfc;
|
|
||||||
cntlr.bbar = &ich9_spi->bbar;
|
|
||||||
cntlr.preop = &ich9_spi->preop;
|
|
||||||
ich_set_bbar(0);
|
|
||||||
}
|
|
||||||
|
|
||||||
static void spi_init_cb(void *unused)
|
|
||||||
{
|
|
||||||
spi_init();
|
|
||||||
}
|
|
||||||
|
|
||||||
BOOT_STATE_INIT_ENTRY(BS_DEV_INIT, BS_ON_ENTRY, spi_init_cb, NULL);
|
|
||||||
|
|
||||||
typedef struct spi_transaction {
|
|
||||||
const uint8_t *out;
|
|
||||||
uint32_t bytesout;
|
|
||||||
uint8_t *in;
|
|
||||||
uint32_t bytesin;
|
|
||||||
uint8_t type;
|
|
||||||
uint8_t opcode;
|
|
||||||
uint32_t offset;
|
|
||||||
} spi_transaction;
|
|
||||||
|
|
||||||
static inline void spi_use_out(spi_transaction *trans, unsigned int bytes)
|
|
||||||
{
|
|
||||||
trans->out += bytes;
|
|
||||||
trans->bytesout -= bytes;
|
|
||||||
}
|
|
||||||
|
|
||||||
static inline void spi_use_in(spi_transaction *trans, unsigned int bytes)
|
|
||||||
{
|
|
||||||
trans->in += bytes;
|
|
||||||
trans->bytesin -= bytes;
|
|
||||||
}
|
|
||||||
|
|
||||||
static void spi_setup_type(spi_transaction *trans)
|
|
||||||
{
|
|
||||||
trans->type = 0xFF;
|
|
||||||
|
|
||||||
/* Try to guess spi type from read/write sizes. */
|
|
||||||
if (trans->bytesin == 0) {
|
|
||||||
if (trans->bytesout > 4)
|
|
||||||
/*
|
|
||||||
* If bytesin = 0 and bytesout > 4, we presume this is
|
|
||||||
* a write data operation, which is accompanied by an
|
|
||||||
* address.
|
|
||||||
*/
|
|
||||||
trans->type = SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS;
|
|
||||||
else
|
|
||||||
trans->type = SPI_OPCODE_TYPE_WRITE_NO_ADDRESS;
|
|
||||||
return;
|
|
||||||
}
|
|
||||||
|
|
||||||
if (trans->bytesout == 1) { /* and bytesin is > 0 */
|
|
||||||
trans->type = SPI_OPCODE_TYPE_READ_NO_ADDRESS;
|
|
||||||
return;
|
|
||||||
}
|
|
||||||
|
|
||||||
if (trans->bytesout == 4) { /* and bytesin is > 0 */
|
|
||||||
trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Fast read command is called with 5 bytes instead of 4 */
|
|
||||||
if (trans->out[0] == SPI_OPCODE_FAST_READ && trans->bytesout == 5) {
|
|
||||||
trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS;
|
|
||||||
--trans->bytesout;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
static int spi_setup_opcode(spi_transaction *trans)
|
|
||||||
{
|
|
||||||
uint16_t optypes;
|
|
||||||
uint8_t opmenu[MENU_BYTES];
|
|
||||||
|
|
||||||
trans->opcode = trans->out[0];
|
|
||||||
spi_use_out(trans, 1);
|
|
||||||
if (!ichspi_lock) {
|
|
||||||
/* The lock is off, so just use index 0. */
|
|
||||||
writeb_(trans->opcode, cntlr.opmenu);
|
|
||||||
optypes = readw_(cntlr.optype);
|
|
||||||
optypes = (optypes & 0xfffc) | (trans->type & 0x3);
|
|
||||||
writew_(optypes, cntlr.optype);
|
|
||||||
return 0;
|
|
||||||
} else {
|
|
||||||
/* The lock is on. See if what we need is on the menu. */
|
|
||||||
uint8_t optype;
|
|
||||||
uint16_t opcode_index;
|
|
||||||
|
|
||||||
/* Write Enable is handled as atomic prefix */
|
|
||||||
if (trans->opcode == SPI_OPCODE_WREN)
|
|
||||||
return 0;
|
|
||||||
|
|
||||||
read_reg(cntlr.opmenu, opmenu, sizeof(opmenu));
|
|
||||||
for (opcode_index = 0; opcode_index < ARRAY_SIZE(opmenu); opcode_index++) {
|
|
||||||
if (opmenu[opcode_index] == trans->opcode)
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
|
|
||||||
if (opcode_index == ARRAY_SIZE(opmenu)) {
|
|
||||||
printk(BIOS_DEBUG, "ICH SPI: Opcode %x not found\n",
|
|
||||||
trans->opcode);
|
|
||||||
return -1;
|
|
||||||
}
|
|
||||||
|
|
||||||
optypes = readw_(cntlr.optype);
|
|
||||||
optype = (optypes >> (opcode_index * 2)) & 0x3;
|
|
||||||
if (trans->type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS &&
|
|
||||||
optype == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS &&
|
|
||||||
trans->bytesout >= 3) {
|
|
||||||
/* We guessed wrong earlier. Fix it up. */
|
|
||||||
trans->type = optype;
|
|
||||||
}
|
|
||||||
if (optype != trans->type) {
|
|
||||||
printk(BIOS_DEBUG, "ICH SPI: Transaction doesn't fit type %d\n",
|
|
||||||
optype);
|
|
||||||
return -1;
|
|
||||||
}
|
|
||||||
return opcode_index;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
static int spi_setup_offset(spi_transaction *trans)
|
|
||||||
{
|
|
||||||
/* Separate the SPI address and data. */
|
|
||||||
switch (trans->type) {
|
|
||||||
case SPI_OPCODE_TYPE_READ_NO_ADDRESS:
|
|
||||||
case SPI_OPCODE_TYPE_WRITE_NO_ADDRESS:
|
|
||||||
return 0;
|
|
||||||
case SPI_OPCODE_TYPE_READ_WITH_ADDRESS:
|
|
||||||
case SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS:
|
|
||||||
trans->offset = ((uint32_t)trans->out[0] << 16) |
|
|
||||||
((uint32_t)trans->out[1] << 8) |
|
|
||||||
((uint32_t)trans->out[2] << 0);
|
|
||||||
spi_use_out(trans, 3);
|
|
||||||
return 1;
|
|
||||||
default:
|
|
||||||
printk(BIOS_DEBUG, "Unrecognized SPI transaction type %#x\n", trans->type);
|
|
||||||
return -1;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Wait for up to 60ms til status register bit(s) turn 1 (in case wait_til_set
|
|
||||||
* below is True) or 0. In case the wait was for the bit(s) to set - write
|
|
||||||
* those bits back, which would cause resetting them.
|
|
||||||
*
|
|
||||||
* Return the last read status value on success or -1 on failure.
|
|
||||||
*/
|
|
||||||
static int ich_status_poll(u16 bitmask, int wait_til_set)
|
|
||||||
{
|
|
||||||
int timeout = 40000; /* This will result in 400 ms */
|
|
||||||
u16 status = 0;
|
|
||||||
|
|
||||||
while (timeout--) {
|
|
||||||
status = readw_(cntlr.status);
|
|
||||||
if (wait_til_set ^ ((status & bitmask) == 0)) {
|
|
||||||
if (wait_til_set)
|
|
||||||
writew_((status & bitmask), cntlr.status);
|
|
||||||
return status;
|
|
||||||
}
|
|
||||||
udelay(10);
|
|
||||||
}
|
|
||||||
|
|
||||||
printk(BIOS_DEBUG, "ICH SPI: SCIP timeout, read %x, expected %x\n",
|
|
||||||
status, bitmask);
|
|
||||||
return -1;
|
|
||||||
}
|
|
||||||
|
|
||||||
static int spi_ctrlr_xfer(const struct spi_slave *slave, const void *dout,
|
|
||||||
size_t bytesout, void *din, size_t bytesin)
|
|
||||||
{
|
|
||||||
uint16_t control;
|
|
||||||
int16_t opcode_index;
|
|
||||||
int with_address;
|
|
||||||
int status;
|
|
||||||
|
|
||||||
spi_transaction trans = {
|
|
||||||
dout, bytesout,
|
|
||||||
din, bytesin,
|
|
||||||
0xff, 0xff, 0
|
|
||||||
};
|
|
||||||
|
|
||||||
/* There has to always at least be an opcode. */
|
|
||||||
if (!bytesout || !dout) {
|
|
||||||
printk(BIOS_DEBUG, "ICH SPI: No opcode for transfer\n");
|
|
||||||
return -1;
|
|
||||||
}
|
|
||||||
/* Make sure if we read something we have a place to put it. */
|
|
||||||
if (bytesin != 0 && !din) {
|
|
||||||
printk(BIOS_DEBUG, "ICH SPI: Read but no target buffer\n");
|
|
||||||
return -1;
|
|
||||||
}
|
|
||||||
|
|
||||||
if (ich_status_poll(SPIS_SCIP, 0) == -1)
|
|
||||||
return -1;
|
|
||||||
|
|
||||||
writew_(SPIS_CDS | SPIS_FCERR, cntlr.status);
|
|
||||||
|
|
||||||
spi_setup_type(&trans);
|
|
||||||
if ((opcode_index = spi_setup_opcode(&trans)) < 0)
|
|
||||||
return -1;
|
|
||||||
if ((with_address = spi_setup_offset(&trans)) < 0)
|
|
||||||
return -1;
|
|
||||||
|
|
||||||
if (trans.opcode == SPI_OPCODE_WREN) {
|
|
||||||
/*
|
|
||||||
* Treat Write Enable as Atomic Pre-Op if possible
|
|
||||||
* in order to prevent the Management Engine from
|
|
||||||
* issuing a transaction between WREN and DATA.
|
|
||||||
*/
|
|
||||||
if (!ichspi_lock)
|
|
||||||
writew_(trans.opcode, cntlr.preop);
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Preset control fields */
|
|
||||||
control = SPIC_SCGO | ((opcode_index & 0x07) << 4);
|
|
||||||
|
|
||||||
/* Issue atomic preop cycle if needed */
|
|
||||||
if (readw_(cntlr.preop))
|
|
||||||
control |= SPIC_ACS;
|
|
||||||
|
|
||||||
if (!trans.bytesout && !trans.bytesin) {
|
|
||||||
/* SPI addresses are 24 bit only */
|
|
||||||
if (with_address)
|
|
||||||
writel_(trans.offset & 0x00FFFFFF, cntlr.addr);
|
|
||||||
|
|
||||||
/*
|
|
||||||
* This is a 'no data' command (like Write Enable), its
|
|
||||||
* bytesout size was 1, decremented to zero while executing
|
|
||||||
* spi_setup_opcode() above. Tell the chip to send the
|
|
||||||
* command.
|
|
||||||
*/
|
|
||||||
writew_(control, cntlr.control);
|
|
||||||
|
|
||||||
/* wait for the result */
|
|
||||||
status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1);
|
|
||||||
if (status == -1)
|
|
||||||
return -1;
|
|
||||||
|
|
||||||
if (status & SPIS_FCERR) {
|
|
||||||
printk(BIOS_DEBUG, "ICH SPI: Command transaction error\n");
|
|
||||||
return -1;
|
|
||||||
}
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Check if this is a write command attempting to transfer more bytes
|
|
||||||
* than the controller can handle. Iterations for writes are not
|
|
||||||
* supported here because each SPI write command needs to be preceded
|
|
||||||
* and followed by other SPI commands, and this sequence is controlled
|
|
||||||
* by the SPI chip driver.
|
|
||||||
*/
|
|
||||||
if (trans.bytesout > cntlr.databytes) {
|
|
||||||
printk(BIOS_DEBUG, "ICH SPI: Too much to write. Does your SPI chip driver use"
|
|
||||||
" spi_crop_chunk()?\n");
|
|
||||||
return -1;
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Read or write up to databytes bytes at a time until everything has
|
|
||||||
* been sent.
|
|
||||||
*/
|
|
||||||
while (trans.bytesout || trans.bytesin) {
|
|
||||||
uint32_t data_length;
|
|
||||||
|
|
||||||
/* SPI addresses are 24 bit only */
|
|
||||||
writel_(trans.offset & 0x00FFFFFF, cntlr.addr);
|
|
||||||
|
|
||||||
if (trans.bytesout)
|
|
||||||
data_length = min(trans.bytesout, cntlr.databytes);
|
|
||||||
else
|
|
||||||
data_length = min(trans.bytesin, cntlr.databytes);
|
|
||||||
|
|
||||||
/* Program data into FDATA0 to N */
|
|
||||||
if (trans.bytesout) {
|
|
||||||
write_reg(trans.out, cntlr.data, data_length);
|
|
||||||
spi_use_out(&trans, data_length);
|
|
||||||
if (with_address)
|
|
||||||
trans.offset += data_length;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Add proper control fields' values */
|
|
||||||
control &= ~((cntlr.databytes - 1) << 8);
|
|
||||||
control |= SPIC_DS;
|
|
||||||
control |= (data_length - 1) << 8;
|
|
||||||
|
|
||||||
/* write it */
|
|
||||||
writew_(control, cntlr.control);
|
|
||||||
|
|
||||||
/* Wait for Cycle Done Status or Flash Cycle Error. */
|
|
||||||
status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1);
|
|
||||||
if (status == -1)
|
|
||||||
return -1;
|
|
||||||
|
|
||||||
if (status & SPIS_FCERR) {
|
|
||||||
printk(BIOS_DEBUG, "ICH SPI: Data transaction error\n");
|
|
||||||
return -1;
|
|
||||||
}
|
|
||||||
|
|
||||||
if (trans.bytesin) {
|
|
||||||
read_reg(cntlr.data, trans.in, data_length);
|
|
||||||
spi_use_in(&trans, data_length);
|
|
||||||
if (with_address)
|
|
||||||
trans.offset += data_length;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Clear atomic preop now that xfer is done */
|
|
||||||
writew_(0, cntlr.preop);
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
static int xfer_vectors(const struct spi_slave *slave,
|
|
||||||
struct spi_op vectors[], size_t count)
|
|
||||||
{
|
|
||||||
return spi_flash_vector_helper(slave, vectors, count, spi_ctrlr_xfer);
|
|
||||||
}
|
|
||||||
|
|
||||||
static const struct spi_ctrlr spi_ctrlr = {
|
|
||||||
.xfer_vector = xfer_vectors,
|
|
||||||
.max_xfer_size = member_size(ich9_spi_regs, fdata),
|
|
||||||
};
|
|
||||||
|
|
||||||
const struct spi_ctrlr_buses spi_ctrlr_bus_map[] = {
|
|
||||||
{
|
|
||||||
.ctrlr = &spi_ctrlr,
|
|
||||||
.bus_start = 0,
|
|
||||||
.bus_end = 0,
|
|
||||||
},
|
|
||||||
};
|
|
||||||
|
|
||||||
const size_t spi_ctrlr_bus_map_count = ARRAY_SIZE(spi_ctrlr_bus_map);
|
|
||||||
Loading…
Reference in New Issue