cpu/x86/mtrr: Get rid of CACHE_ROM_SIZE_OVERRIDE

As far as I can see this Kconfig option was used wrong ever since it
was added. According to the commit message of 107f72e (Re-declare
CACHE_ROM_SIZE as aligned ROM_SIZE for MTRR), it was only necessary
to prevent overlapping with CAR.

Let's handle the potential overlap in C macros instead and get rid
of that option. Currently, it was only used by most FSP1.0 boards,
and only because the `fsp1_0/Kconfig` set it to CBFS_SIZE (WTF?).

Change-Id: I4d0096f14a9d343c2e646e48175fe2127198a822
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/26566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>

src/Kconfig

@@ -516,10 +516,6 @@ config IOAPIC
 	bool
 	default n
 
-config CACHE_ROM_SIZE_OVERRIDE
-	hex
-	default 0x0
-
 config USE_WATCHDOG_ON_BOOT
 	bool
 	default n

src/drivers/intel/fsp1_0/Kconfig

@@ -103,15 +103,6 @@ config VIRTUAL_ROM_SIZE
 	  the SPI ROMs are loaded with an 8 MB coreboot image, the virtual ROM
 	  size is 16 MB.
 
-config CACHE_ROM_SIZE_OVERRIDE
-	hex "Cache ROM Size"
-	default CBFS_SIZE
-	help
-	  This is the size of the cachable area that is passed into the FSP in
-	  the early initialization.  Typically this should be the size of the CBFS
-	  area, but the size must be a power of 2 whereas the CBFS size does not
-	  have this limitation.
-
 config USE_GENERIC_FSP_CAR_INC
 	bool
 	default n

src/include/cpu/x86/mtrr.h

@@ -118,12 +118,15 @@ static inline unsigned int fls(unsigned int x)
 }
 #endif /* !defined(__ASSEMBLER__) && !defined(__ROMCC__) */
 
-/* Align up to next power of 2, suitable for ROMCC and assembler too.
- * Range of result 256kB to 128MB is good enough here.
- */
+/* Align up/down to next power of 2, suitable for ROMCC and assembler
+   too. Range of result 256kB to 128MB is good enough here. */
 #define _POW2_MASK(x)	((x>>1)|(x>>2)|(x>>3)|(x>>4)|(x>>5)| \
 					(x>>6)|(x>>7)|(x>>8)|((1<<18)-1))
 #define _ALIGN_UP_POW2(x)	((x + _POW2_MASK(x)) & ~_POW2_MASK(x))
+#define _ALIGN_DOWN_POW2(x)	((x) & ~_POW2_MASK(x))
+
+/* Calculate `4GiB - x` (e.g. absolute address for offset from 4GiB) */
+#define _FROM_4G_TOP(x) (((1 << 20) - ((x) >> 12)) << 12)
 
 /* At the end of romstage, low RAM 0..CACHE_TM_RAMTOP may be set
  * as write-back cacheable to speed up ramstage decompression.
@@ -135,29 +138,29 @@ static inline unsigned int fls(unsigned int x)
 # error "CONFIG_XIP_ROM_SIZE is not a power of 2"
 #endif
 
-/* Select CACHE_ROM_SIZE to use with MTRR setup. For most cases this
- * resolves to a suitable CONFIG_ROM_SIZE but some odd cases need to
- * use CONFIG_CACHE_ROM_SIZE_OVERRIDE in the mainboard Kconfig.
- */
-#if (CONFIG_CACHE_ROM_SIZE_OVERRIDE != 0)
-# define CACHE_ROM_SIZE	CONFIG_CACHE_ROM_SIZE_OVERRIDE
-#else
-# if ((CONFIG_ROM_SIZE & (CONFIG_ROM_SIZE-1)) == 0)
-#  define CACHE_ROM_SIZE CONFIG_ROM_SIZE
-# else
-#  define CACHE_ROM_SIZE _ALIGN_UP_POW2(CONFIG_ROM_SIZE)
-#  if (CACHE_ROM_SIZE < CONFIG_ROM_SIZE) || (CACHE_ROM_SIZE >= \
-	(2 * CONFIG_ROM_SIZE))
-#   error "CACHE_ROM_SIZE is not optimal."
-#  endif
-# endif
+/* For ROM caching, generally, try to use the next power of 2. */
+#define OPTIMAL_CACHE_ROM_SIZE _ALIGN_UP_POW2(CONFIG_ROM_SIZE)
+#define OPTIMAL_CACHE_ROM_BASE _FROM_4G_TOP(OPTIMAL_CACHE_ROM_SIZE)
+#if (OPTIMAL_CACHE_ROM_SIZE < CONFIG_ROM_SIZE) || \
+    (OPTIMAL_CACHE_ROM_SIZE >= (2 * CONFIG_ROM_SIZE))
+# error "Optimal CACHE_ROM_SIZE can't be derived, _POW2_MASK needs refinement."
 #endif
 
+/* Make sure it doesn't overlap CAR, though. If the gap between
+   CAR and 4GiB is too small, make it at most the size of this
+   gap. As we can't align up (might overlap again), align down
+   to get a power of 2 again, for a single MTRR. */
+#define CAR_END (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE)
+#if CAR_END > OPTIMAL_CACHE_ROM_BASE
+# define CACHE_ROM_SIZE _ALIGN_DOWN_POW2(_FROM_4G_TOP(CAR_END))
+#else
+# define CACHE_ROM_SIZE OPTIMAL_CACHE_ROM_SIZE
+#endif
 #if ((CACHE_ROM_SIZE & (CACHE_ROM_SIZE - 1)) != 0)
-# error "CACHE_ROM_SIZE is not a power of 2."
+# error "CACHE_ROM_SIZE is not a power of 2, _POW2_MASK needs refinement."
 #endif
 
-#define CACHE_ROM_BASE	(((1<<20) - (CACHE_ROM_SIZE>>12))<<12)
+#define CACHE_ROM_BASE _FROM_4G_TOP(CACHE_ROM_SIZE)
 
 #if (IS_ENABLED(CONFIG_SOC_SETS_MSRS) && !defined(__ASSEMBLER__) \
 	&& !defined(__ROMCC__))

src/mainboard/adi/rcc-dff/Kconfig

@@ -37,10 +37,6 @@ config MAX_CPUS
 	int
 	default 16
 
-config CACHE_ROM_SIZE_OVERRIDE
-	hex
-	default 0x800000
-
 config FSP_FILE
 	string
 	default "../intel/fsp/rangeley/FvFsp.bin"

src/mainboard/esd/atom15/Kconfig

@@ -36,10 +36,6 @@ config MAX_CPUS
 	int
 	default 16
 
-config CACHE_ROM_SIZE_OVERRIDE
-	hex
-	default 0x800000
-
 config FSP_FILE
 	string
 	default "../intel/fsp/baytrail/BAYTRAIL_FSP.fd"

src/mainboard/intel/bayleybay_fsp/Kconfig

@@ -38,10 +38,6 @@ config MAX_CPUS
 	int
 	default 16
 
-config CACHE_ROM_SIZE_OVERRIDE
-	hex
-	default 0x800000
-
 config FSP_FILE
 	string
 	default "../intel/fsp/baytrail/BAYTRAIL_FSP_ECC.fd" if BOARD_INTEL_BAKERSPORT_FSP

src/mainboard/intel/camelbackmountain_fsp/Kconfig

@@ -23,10 +23,6 @@ config IRQ_SLOT_COUNT
 	int
 	default 18
 
-config CACHE_ROM_SIZE_OVERRIDE
-	hex
-	default 0x800000
-
 config CBFS_SIZE
 	hex
 	default 0x00200000

src/mainboard/intel/minnowmax/Kconfig

@@ -36,10 +36,6 @@ config MAX_CPUS
 	int
 	default 16
 
-config CACHE_ROM_SIZE_OVERRIDE
-	hex
-	default 0x800000
-
 config FSP_FILE
 	string
 	default "../intel/fsp/baytrail/BAYTRAIL_FSP.fd"

src/mainboard/intel/mohonpeak/Kconfig

@@ -37,10 +37,6 @@ config MAX_CPUS
 	int
 	default 16
 
-config CACHE_ROM_SIZE_OVERRIDE
-	hex
-	default 0x800000
-
 config FSP_FILE
 	string
 	default "../intel/fsp/rangeley/FvFsp.bin"

src/mainboard/ocp/monolake/Kconfig

@@ -23,10 +23,6 @@ config IRQ_SLOT_COUNT
 	int
 	default 18
 
-config CACHE_ROM_SIZE_OVERRIDE
-	hex
-	default 0x800000
-
 config CBFS_SIZE
 	hex
 	default 0x00200000

src/mainboard/ocp/wedge100s/Kconfig

@@ -24,10 +24,6 @@ config IRQ_SLOT_COUNT
 	int
 	default 18
 
-config CACHE_ROM_SIZE_OVERRIDE
-	hex
-	default 0x800000
-
 config CBFS_SIZE
 	hex
 	default 0x00200000

src/mainboard/siemens/mc_bdx1/Kconfig

@@ -27,10 +27,6 @@ config IRQ_SLOT_COUNT
 	int
 	default 18
 
-config CACHE_ROM_SIZE_OVERRIDE
-	hex
-	default 0x1000000
-
 config CBFS_SIZE
 	hex
 	default 0x00D00000

src/mainboard/siemens/mc_tcu3/Kconfig

@@ -44,10 +44,6 @@ config MAX_CPUS
 	int
 	default 16
 
-config CACHE_ROM_SIZE_OVERRIDE
-	hex
-	default 0x1000000
-
 config CBFS_SIZE
 	hex
 	default 0x00e00000