soc/amd/stoneyridge: Use new common SPI code
Use the new SPI code from common folder, delete spi.c. SPI related macros must be single defined, in southbridge.h if they are used by files other than the common SPI code, fch_spi.h if they are only used by the common SPI code. The only exception is SPI_FIFO_DEPTH which must be in southbridge.h, because it can change between SOC. BUG=b:136595978 TEST=Build and boot grunt using new SPI code, with debug enabled. Check output. Change-Id: I639973d993316a10daa7564462e689b2c183f536 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
This commit is contained in:
Richard Spiegel
Martin Roth
parent
e512bce189
commit
bf1712422a
|
|
@ -28,13 +28,21 @@
|
|||
#define IDCODE_LEN (IDCODE_CONT_LEN + IDCODE_PART_LEN)
|
||||
|
||||
/* SPI MMIO registers */
|
||||
#define SPI_CNTRL0 0x00
|
||||
#define SPI_ACCESS_MAC_ROM_EN BIT(22)
|
||||
#define SPI_RESTRICTED_CMD1 0x04
|
||||
#define SPI_RESTRICTED_CMD2 0x08
|
||||
#define SPI_CNTRL1 0x0c
|
||||
#define SPI_CMD_CODE 0x45
|
||||
#define SPI_CMD_TRIGGER 0x47
|
||||
#define SPI_CMD_TRIGGER_EXECUTE BIT(7)
|
||||
#define SPI_TX_BYTE_COUNT 0x48
|
||||
#define SPI_RX_BYTE_COUNT 0x4b
|
||||
#define SPI_STATUS 0x4c
|
||||
#define SPI_DONE_BYTE_COUNT_SHIFT 0
|
||||
#define SPI_DONE_BYTE_COUNT_MASK 0xff
|
||||
#define SPI_FIFO_WR_PTR_SHIFT 8
|
||||
#define SPI_FIFO_WR_PTR_MASK 0x7f
|
||||
#define SPI_FIFO_RD_PTR_SHIFT 16
|
||||
#define SPI_FIFO_RD_PTR_MASK 0x7f
|
||||
|
||||
/* Special SST write commands */
|
||||
#define CMD_SST_BP 0x02 /* Byte Program */
|
||||
|
|
|
|||
|
|
@ -52,7 +52,7 @@ config CPU_SPECIFIC_OPTIONS
|
|||
select GENERIC_UDELAY
|
||||
select IOAPIC
|
||||
select HAVE_USBDEBUG_OPTIONS
|
||||
select SPI_FLASH if HAVE_ACPI_RESUME
|
||||
select SOC_AMD_COMMON_BLOCK_SPI
|
||||
select TSC_SYNC_LFENCE
|
||||
select COLLECT_TIMESTAMPS
|
||||
select SOC_AMD_PI
|
||||
|
|
|
|||
|
|
@ -49,7 +49,6 @@ bootblock-y += reset.c
|
|||
bootblock-y += tsc_freq.c
|
||||
bootblock-y += southbridge.c
|
||||
bootblock-y += nb_util.c
|
||||
bootblock-$(CONFIG_SPI_FLASH) += spi.c
|
||||
bootblock-$(CONFIG_HAVE_SMI_HANDLER) += smi_util.c
|
||||
|
||||
romstage-y += BiosCallOuts.c
|
||||
|
|
@ -67,7 +66,6 @@ romstage-$(CONFIG_STONEYRIDGE_UART) += uart.c
|
|||
romstage-y += tsc_freq.c
|
||||
romstage-y += southbridge.c
|
||||
romstage-y += nb_util.c
|
||||
romstage-$(CONFIG_SPI_FLASH) += spi.c
|
||||
romstage-$(CONFIG_HAVE_SMI_HANDLER) += smi_util.c
|
||||
|
||||
verstage-y += gpio.c
|
||||
|
|
@ -78,7 +76,6 @@ verstage-y += reset.c
|
|||
verstage-$(CONFIG_STONEYRIDGE_UART) += uart.c
|
||||
verstage-y += tsc_freq.c
|
||||
verstage-y += nb_util.c
|
||||
verstage-$(CONFIG_SPI_FLASH) += spi.c
|
||||
|
||||
postcar-y += monotonic_timer.c
|
||||
postcar-$(CONFIG_STONEYRIDGE_UART) += uart.c
|
||||
|
|
@ -109,7 +106,6 @@ ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smi_util.c
|
|||
ramstage-$(CONFIG_STONEYRIDGE_UART) += uart.c
|
||||
ramstage-y += usb.c
|
||||
ramstage-y += tsc_freq.c
|
||||
ramstage-$(CONFIG_SPI_FLASH) += spi.c
|
||||
ramstage-y += finalize.c
|
||||
ramstage-y += nb_util.c
|
||||
|
||||
|
|
@ -118,7 +114,6 @@ smm-y += smihandler.c
|
|||
smm-y += smi_util.c
|
||||
smm-y += tsc_freq.c
|
||||
smm-$(CONFIG_DEBUG_SMI) += uart.c
|
||||
smm-$(CONFIG_SPI_FLASH) += spi.c
|
||||
smm-y += nb_util.c
|
||||
smm-y += gpio.c
|
||||
|
||||
|
|
|
|||
|
|
@ -265,22 +265,10 @@
|
|||
#define SPI_READ_MODE_QUAD144 (BIT(30) | BIT(18))
|
||||
#define SPI_READ_MODE_NORMAL66 (BIT(30) | BIT(29) )
|
||||
#define SPI_READ_MODE_FAST (BIT(30) | BIT(29) | BIT(18))
|
||||
#define SPI_ACCESS_MAC_ROM_EN BIT(22)
|
||||
#define SPI_FIFO_PTR_CLR BIT(20)
|
||||
#define SPI_ARB_ENABLE BIT(19)
|
||||
#define EXEC_OPCODE BIT(16)
|
||||
#define SPI_CNTRL1 0x0c
|
||||
#define SPI_CMD_CODE 0x45
|
||||
#define SPI_CMD_TRIGGER 0x47
|
||||
#define SPI_CMD_TRIGGER_EXECUTE BIT(7)
|
||||
#define SPI_TX_BYTE_COUNT 0x48
|
||||
#define SPI_RX_BYTE_COUNT 0x4b
|
||||
#define SPI_STATUS 0x4c
|
||||
#define SPI_DONE_BYTE_COUNT_SHIFT 0
|
||||
#define SPI_DONE_BYTE_COUNT_MASK 0xff
|
||||
#define SPI_FIFO_WR_PTR_SHIFT 8
|
||||
#define SPI_FIFO_WR_PTR_MASK 0x7f
|
||||
#define SPI_FIFO_RD_PTR_SHIFT 16
|
||||
#define SPI_FIFO_RD_PTR_MASK 0x7f
|
||||
#define SPI_FIFO 0x80
|
||||
#define SPI_FIFO_DEPTH (0xc7 - SPI_FIFO)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,188 +0,0 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2012 Advanced Micro Devices, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdlib.h>
|
||||
#include <device/mmio.h>
|
||||
#include <lib.h>
|
||||
#include <timer.h>
|
||||
#include <console/console.h>
|
||||
#include <commonlib/helpers.h>
|
||||
#include <spi_flash.h>
|
||||
#include <spi-generic.h>
|
||||
#include <device/device.h>
|
||||
#include <device/pci.h>
|
||||
#include <soc/southbridge.h>
|
||||
#include <amdblocks/lpc.h>
|
||||
#include <soc/pci_devs.h>
|
||||
|
||||
#define SPI_DEBUG_DRIVER CONFIG(DEBUG_SPI_FLASH)
|
||||
|
||||
static uintptr_t spibar;
|
||||
|
||||
static void set_spibar(uintptr_t base)
|
||||
{
|
||||
spibar = base;
|
||||
}
|
||||
|
||||
static inline uint8_t spi_read8(uint8_t reg)
|
||||
{
|
||||
return read8((void *)(spibar + reg));
|
||||
}
|
||||
|
||||
static inline uint32_t spi_read32(uint8_t reg)
|
||||
{
|
||||
return read32((void *)(spibar + reg));
|
||||
}
|
||||
|
||||
static inline void spi_write8(uint8_t reg, uint8_t val)
|
||||
{
|
||||
write8((void *)(spibar + reg), val);
|
||||
}
|
||||
|
||||
static inline void spi_write32(uint8_t reg, uint32_t val)
|
||||
{
|
||||
write32((void *)(spibar + reg), val);
|
||||
}
|
||||
|
||||
static void dump_state(const char *str)
|
||||
{
|
||||
if (!SPI_DEBUG_DRIVER)
|
||||
return;
|
||||
|
||||
printk(BIOS_DEBUG, "SPI: %s\n", str);
|
||||
printk(BIOS_DEBUG, "Cntrl0: %x\n", spi_read32(SPI_CNTRL0));
|
||||
printk(BIOS_DEBUG, "Status: %x\n", spi_read32(SPI_STATUS));
|
||||
printk(BIOS_DEBUG, "TxByteCount: %x\n", spi_read8(SPI_TX_BYTE_COUNT));
|
||||
printk(BIOS_DEBUG, "RxByteCount: %x\n", spi_read8(SPI_RX_BYTE_COUNT));
|
||||
printk(BIOS_DEBUG, "CmdCode: %x\n", spi_read8(SPI_CMD_CODE));
|
||||
hexdump((void *)(spibar + SPI_FIFO), SPI_FIFO_DEPTH);
|
||||
}
|
||||
|
||||
static int wait_for_ready(void)
|
||||
{
|
||||
const uint32_t timeout_ms = 500;
|
||||
struct stopwatch sw;
|
||||
|
||||
stopwatch_init_msecs_expire(&sw, timeout_ms);
|
||||
|
||||
do {
|
||||
if (!(spi_read32(SPI_STATUS) & SPI_BUSY))
|
||||
return 0;
|
||||
} while (!stopwatch_expired(&sw));
|
||||
|
||||
return -1;
|
||||
}
|
||||
|
||||
static int execute_command(void)
|
||||
{
|
||||
dump_state("Before Execute");
|
||||
|
||||
spi_write8(SPI_CMD_TRIGGER, SPI_CMD_TRIGGER_EXECUTE);
|
||||
|
||||
if (wait_for_ready())
|
||||
printk(BIOS_DEBUG,
|
||||
"FCH SPI Error: Timeout executing command\n");
|
||||
|
||||
dump_state("Transaction finished");
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void spi_init(void)
|
||||
{
|
||||
set_spibar(lpc_get_spibase());
|
||||
}
|
||||
|
||||
static int spi_ctrlr_xfer(const struct spi_slave *slave, const void *dout,
|
||||
size_t bytesout, void *din, size_t bytesin)
|
||||
{
|
||||
size_t count;
|
||||
uint8_t cmd;
|
||||
uint8_t *bufin = din;
|
||||
const uint8_t *bufout = dout;
|
||||
|
||||
if (SPI_DEBUG_DRIVER)
|
||||
printk(BIOS_DEBUG, "%s(%zx, %zx)\n", __func__, bytesout,
|
||||
bytesin);
|
||||
|
||||
/* First byte is cmd which cannot be sent through FIFO */
|
||||
cmd = bufout[0];
|
||||
bufout++;
|
||||
bytesout--;
|
||||
|
||||
/*
|
||||
* Check if this is a write command attempting to transfer more bytes
|
||||
* than the controller can handle. Iterations for writes are not
|
||||
* supported here because each SPI write command needs to be preceded
|
||||
* and followed by other SPI commands, and this sequence is controlled
|
||||
* by the SPI chip driver.
|
||||
*/
|
||||
if (bytesout + bytesin > SPI_FIFO_DEPTH) {
|
||||
printk(BIOS_DEBUG, "FCH SPI: Too much to write. Does your SPI"
|
||||
" chip driver use spi_crop_chunk()?\n");
|
||||
return -1;
|
||||
}
|
||||
|
||||
if (wait_for_ready())
|
||||
return -1;
|
||||
|
||||
spi_write8(SPI_CMD_CODE, cmd);
|
||||
spi_write8(SPI_TX_BYTE_COUNT, bytesout);
|
||||
spi_write8(SPI_RX_BYTE_COUNT, bytesin);
|
||||
|
||||
for (count = 0; count < bytesout; count++)
|
||||
spi_write8(SPI_FIFO + count, bufout[count]);
|
||||
|
||||
if (execute_command())
|
||||
return -1;
|
||||
|
||||
for (count = 0; count < bytesin; count++)
|
||||
bufin[count] = spi_read8(SPI_FIFO + count + bytesout);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int chipset_volatile_group_begin(const struct spi_flash *flash)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
int chipset_volatile_group_end(const struct spi_flash *flash)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int xfer_vectors(const struct spi_slave *slave,
|
||||
struct spi_op vectors[], size_t count)
|
||||
{
|
||||
return spi_flash_vector_helper(slave, vectors, count, spi_ctrlr_xfer);
|
||||
}
|
||||
|
||||
static const struct spi_ctrlr spi_ctrlr = {
|
||||
.xfer_vector = xfer_vectors,
|
||||
.max_xfer_size = SPI_FIFO_DEPTH,
|
||||
.flags = SPI_CNTRLR_DEDUCT_CMD_LEN | SPI_CNTRLR_DEDUCT_OPCODE_LEN,
|
||||
};
|
||||
|
||||
const struct spi_ctrlr_buses spi_ctrlr_bus_map[] = {
|
||||
{
|
||||
.ctrlr = &spi_ctrlr,
|
||||
.bus_start = 0,
|
||||
.bus_end = 0,
|
||||
},
|
||||
};
|
||||
|
||||
const size_t spi_ctrlr_bus_map_count = ARRAY_SIZE(spi_ctrlr_bus_map);
|
||||
Loading…
Reference in New Issue