skylake: fill out gen_pmcon_* bitfields

Open coding bitfields is really annoying as no one knows
what they are unless you have a doc in front of you.
Fill in the bitfields for the GEN_PMCON_A and GEN_PMCON_B
registers.

BUG=chrome-os-partner:43522
BRANCH=None
TEST=Built and booted glados.

Original-Change-Id: Id48de68eaa3896c17d5da2ffb0bcf17062f73e5e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290336
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>

Change-Id: I968be9736419e26a771e0a0c3c964d540fbb1efe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11182
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This commit is contained in:
Aaron Durbin 2015-08-04 14:02:54 -05:00
parent 43b1066c0d
commit c5b91d6800
2 changed files with 38 additions and 4 deletions

View File

@ -32,12 +32,41 @@
#define SCIS_IRQ23 7
#define PWRMBASE 0x48
#define GEN_PMCON_A 0xa0
#define DC_PP_DIS (1 << 30)
#define DSX_PP_DIS (1 << 29)
#define AG3_PP_EN (1 << 28)
#define SX_PP_EN (1 << 27)
#define DISB (1 << 23)
#define MEM_SR (1 << 21)
#define MS4V (1 << 18)
#define GBL_RST_STS (1 << 16)
#define ALLOW_ICLK_PLL_SD_INC0 (1 << 15)
#define MPHY_CRICLK_GATE_OVER (1 << 14)
#define ALLOW_OPI_PLL_SD_INC0 (1 << 13)
#define ALLOW_SPXB_CG_INC0 (1 << 12)
#define BIOS_PCI_EXP_EN (1 << 10)
#define PWRBTN_LVL (1 << 9)
#define ALLOW_L1LOW_C0 (1 << 7)
#define ALLOW_L1LOW_OPI_ON (1 << 6)
#define SMI_LOCK (1 << 4)
#define GEN_PMCON_B 0xa4
#define SLP_STR_POL_LOCK (1 << 18)
#define ACPI_BASE_LOCK (1 << 17)
#define SUS_PWR_FLR (1 << 14)
#define WOL_EN_OVRD (1 << 13)
#define DIS_SLP_X_STRCH_SUS_UP (1 << 12)
#define SLP_S3_MIN_ASST_WDTH_MASK (0x3 << 10)
#define SLP_S3_MIN_ASST_WDTH_60USEC (0 << 10)
#define SLP_S3_MIN_ASST_WDTH_1MS (1 << 10)
#define SLP_S3_MIN_ASST_WDTH_50MS (2 << 10)
#define SLP_S3_MIN_ASST_WDTH_2S (3 << 10)
#define HOST_RST_STS (1 << 9)
#define S4MAW_MASK (0x3 << 4)
#define S4MAW_1S (1 << 4)
#define S4MAW_2S (2 << 4)
#define S4MAW_3S (3 << 4)
#define S4MAW_4S (0 << 4)
#define S4ASE (1 << 3)
#define RTC_BATTERY_DEAD (1 << 2)
#define PWR_FLR (1 << 1)
#define SLEEP_AFTER_POWER_FAIL (1 << 0)

View File

@ -39,12 +39,15 @@
#endif
static const struct reg_script pch_pmc_misc_init_script[] = {
/* Setup SLP signal assertion, SLP_S4=4s, SLP_S3=50ms */
REG_PCI_RMW16(GEN_PMCON_B, ~((3 << 4)|(1 << 10)),
(1 << 3)|(1 << 11)|(1 << 12)),
/* SLP_S4=4s, SLP_S3=50ms, disable SLP_X stretching after SUS loss. */
REG_PCI_RMW16(GEN_PMCON_B,
~(S4MAW_MASK | SLP_S3_MIN_ASST_WDTH_MASK),
S4MAW_4S | SLP_S3_MIN_ASST_WDTH_50MS |
DIS_SLP_X_STRCH_SUS_UP),
/* Enable SCI and clear SLP requests. */
REG_IO_RMW32(ACPI_BASE_ADDRESS + PM1_CNT, ~SLP_TYP, SCI_EN),
/* Indicate DRAM init done for MRC */
REG_PCI_OR8(GEN_PMCON_A, (1 << 23)),
REG_PCI_OR8(GEN_PMCON_A, DISB),
REG_SCRIPT_END
};
@ -237,6 +240,8 @@ static void pmc_init(struct device *dev)
/* Initialize power management */
pch_power_options();
/* Note that certain bits may be cleared from running script as
* certain bit fields are write 1 to clear. */
reg_script_run_on_dev(dev, pch_pmc_misc_init_script);
pch_set_acpi_mode();