soc/mediatek/mt8188: Support ARM arch timer

Use ARM architectual timer by initializing frequency to 13 MHz. Since
system timer is the source of the architectual timer, we also call
`timer_prepare` in `init_timer`.

BUG=b:229800119
TEST=run `suite:faft_bios` to verify the firmware stability.
     check timestamps by cbmem.

Cq-Depend: chromium:4747539
Change-Id: I8b1348044e4c92984510604b7f61611e13284d86
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76919
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
Yidi Lin 2023-08-02 12:48:04 +08:00 committed by Martin L Roth
parent a0ab63e4b6
commit db95b24c74
3 changed files with 32 additions and 1 deletions

View File

@ -13,6 +13,7 @@ config SOC_MEDIATEK_MT8188
select MEDIATEK_DRAM_BLOB_FAST_INIT
select USE_CBMEM_DRAM_INFO
select DPM_FOUR_CHANNEL
select ARM64_USE_ARCH_TIMER
if SOC_MEDIATEK_MT8188

View File

@ -6,7 +6,7 @@ all-y += ../common/gpio.c ../common/gpio_op.c gpio.c
all-y += ../common/i2c.c i2c.c
all-y += ../common/pll.c pll.c
all-$(CONFIG_SPI_FLASH) += ../common/spi.c spi.c
all-y += ../common/timer.c ../common/timer_prepare.c
all-y += timer.c ../common/timer_prepare.c
all-y += ../common/uart.c
bootblock-y += bootblock.c

View File

@ -0,0 +1,30 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <arch/lib_helpers.h>
#include <commonlib/helpers.h>
#include <delay.h>
#include <soc/addressmap.h>
#include <soc/timer.h>
static struct mtk_gpt_regs *const mtk_gpt = (void *)GPT_BASE;
void init_timer(void)
{
timer_prepare();
raw_write_cntfrq_el0(13 * MHz);
/* TODO: remove GPT timer init after DRAM blob switching to arch timer */
/* Disable timer and clear the counter */
clrbits32(&mtk_gpt->gpt6_con, GPT6_CON_EN);
setbits32(&mtk_gpt->gpt6_con, GPT6_CON_CLR);
/* Set clock source to system clock and set clock divider to 1 */
SET32_BITFIELDS(&GPT6_CLOCK_REG(mtk_gpt),
GPT6_CLK_CLK6, GPT6_CLK_CLK6_SYS,
GPT6_CLK_CLKDIV6, GPT6_CLK_CLKDIV_DIV1);
/* Set operation mode to FREERUN mode and enable timer */
SET32_BITFIELDS(&mtk_gpt->gpt6_con,
GPT6_CON_MODE6, GPT6_MODE_FREERUN,
GPT6_CON_EN6, GPT6_CON_EN);
}