mb/asrock/h110m: Relocate devicetree settings
Some settings are suspicious, and have been annotated with FIXMEs. Tested with BUILD_TIMELESS=1, its coreboot.rom does not change. Change-Id: I7755867cb92745f542a4261db5dd118ca905612b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43919 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This commit is contained in:
Angel Pons
Patrick Georgi
parent
9addda3c41
commit
e18cdf4d93
|
|
@ -18,9 +18,6 @@ chip soc/intel/skylake
|
|||
register "gpe0_dw1" = "GPP_D"
|
||||
register "gpe0_dw2" = "GPP_E"
|
||||
|
||||
# Set @0x280-0x2ff I/O Range for SuperIO HWM
|
||||
register "gen1_dec" = "0x007c0281"
|
||||
|
||||
# Enable "Intel Speed Shift Technology"
|
||||
register "speed_shift_enable" = "1"
|
||||
|
||||
|
|
@ -28,19 +25,9 @@ chip soc/intel/skylake
|
|||
register "dptf_enable" = "1"
|
||||
|
||||
# FSP Configuration
|
||||
register "ScsEmmcHs400Enabled" = "0"
|
||||
register "ScsSdCardEnabled" = "0"
|
||||
register "HeciEnabled" = "0"
|
||||
register "SkipExtGfxScan" = "0"
|
||||
register "PrimaryDisplay" = "Display_PEG"
|
||||
register "Device4Enable" = "1"
|
||||
register "SaGv" = "SaGv_Enabled"
|
||||
register "PmTimerDisabled" = "0"
|
||||
register "DspEnable" = "0"
|
||||
register "PchHdaVcType" = "Vc1"
|
||||
|
||||
# Set LPC Serial IRQ mode
|
||||
register "serirq_mode" = "SERIRQ_CONTINUOUS"
|
||||
|
||||
# Enabling SLP_S3#, SLP_S4#, SLP_SUS and SLP_A Stretch
|
||||
# SLP_S3 Minimum Assertion Width. Values 0: 60us, 1: 1ms, 2: 50ms, 3: 2s
|
||||
|
|
@ -122,50 +109,6 @@ chip soc/intel/skylake
|
|||
.voltage_limit = 1520 \
|
||||
}"
|
||||
|
||||
# USB
|
||||
register "usb2_ports[0]" = "USB2_PORT_MID(OC0)"
|
||||
register "usb2_ports[1]" = "USB2_PORT_MID(OC0)"
|
||||
register "usb2_ports[2]" = "USB2_PORT_MID(OC4)"
|
||||
register "usb2_ports[3]" = "USB2_PORT_MID(OC4)"
|
||||
register "usb2_ports[4]" = "USB2_PORT_MID(OC2)"
|
||||
register "usb2_ports[5]" = "USB2_PORT_MID(OC2)"
|
||||
register "usb2_ports[6]" = "USB2_PORT_MID(OC0)"
|
||||
register "usb2_ports[7]" = "USB2_PORT_MID(OC0)"
|
||||
register "usb2_ports[8]" = "USB2_PORT_MID(OC0)"
|
||||
register "usb2_ports[9]" = "USB2_PORT_MID(OC0)"
|
||||
register "usb2_ports[10]" = "USB2_PORT_MID(OC1)"
|
||||
register "usb2_ports[11]" = "USB2_PORT_MID(OC1)"
|
||||
register "usb2_ports[12]" = "USB2_PORT_MID(OC_SKIP)"
|
||||
register "usb2_ports[13]" = "USB2_PORT_MID(OC_SKIP)"
|
||||
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)"
|
||||
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)"
|
||||
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)"
|
||||
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)"
|
||||
register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC1)"
|
||||
register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC1)"
|
||||
register "usb3_ports[6]" = "USB3_PORT_DEFAULT(OC_SKIP)"
|
||||
register "usb3_ports[7]" = "USB3_PORT_DEFAULT(OC_SKIP)"
|
||||
register "usb3_ports[8]" = "USB3_PORT_DEFAULT(OC_SKIP)"
|
||||
register "usb3_ports[9]" = "USB3_PORT_DEFAULT(OC_SKIP)"
|
||||
|
||||
# SATA
|
||||
register "SataSalpSupport" = "1"
|
||||
# SATA4 and SATA5 are located in the lower right corner of the board,
|
||||
# but they are not populated. This is because the same PCB is used to
|
||||
# make boards with better PCHs, which can have up to six SATA ports.
|
||||
# However, the H110 PCH only has four SATA ports, which explains why
|
||||
# two connectors are missing.
|
||||
register "SataPortsEnable" = "{ \
|
||||
[0] = 1, \
|
||||
[1] = 1, \
|
||||
[2] = 1, \
|
||||
[3] = 1, \
|
||||
[4] = 0, \
|
||||
[5] = 0, \
|
||||
[6] = 0, \
|
||||
[7] = 0, \
|
||||
}"
|
||||
|
||||
# PCH UART, SPI, I2C
|
||||
register "SerialIoDevMode" = "{ \
|
||||
[PchSerialIoIndexI2C0] = PchSerialIoDisabled, \
|
||||
|
|
@ -181,55 +124,6 @@ chip soc/intel/skylake
|
|||
[PchSerialIoIndexUart2] = PchSerialIoDisabled, \
|
||||
}"
|
||||
|
||||
# Set params for PEG 0:1:0
|
||||
register "Peg0MaxLinkWidth" = "Peg0_x16"
|
||||
# Configure PCIe clockgen in PCH
|
||||
# PEG0 uses SRCCLKREQ0 and CLKSRC0
|
||||
register "PcieRpClkReqSupport[0]" = "1"
|
||||
register "PcieRpClkReqNumber[0]" = "0"
|
||||
register "PcieRpClkSrcNumber[0]" = "0"
|
||||
|
||||
# Enable Root port 6(x1) for LAN.
|
||||
register "PcieRpEnable[5]" = "1"
|
||||
# Disable CLKREQ#, since onboard LAN is always present
|
||||
register "PcieRpClkReqSupport[5]" = "0"
|
||||
# Enable Advanced Error Reporting
|
||||
register "PcieRpAdvancedErrorReporting[5]" = "1"
|
||||
# Enable Latency Tolerance Reporting Mechanism
|
||||
register "PcieRpLtrEnable[5]" = "1"
|
||||
# Use CLK SRC 1
|
||||
register "PcieRpClkSrcNumber[5]" = "1"
|
||||
|
||||
# Enable Root port 5 (x1) for PCIE slot.
|
||||
register "PcieRpEnable[4]" = "1"
|
||||
# Enable CLKREQ#
|
||||
register "PcieRpClkReqSupport[4]" = "1"
|
||||
# Use SRCCLKREQ2#
|
||||
register "PcieRpClkReqNumber[4]" = "2"
|
||||
# Enable Advanced Error Reporting
|
||||
register "PcieRpAdvancedErrorReporting[4]" = "1"
|
||||
# Enable Latency Tolerance Reporting Mechanism
|
||||
register "PcieRpLtrEnable[4]" = "1"
|
||||
# Use CLK SRC 2
|
||||
register "PcieRpClkSrcNumber[4]" = "2"
|
||||
# Use Hot Plug subsystem
|
||||
register "PcieRpHotPlug[4]" = "1"
|
||||
|
||||
# Enable Root port 7(x1) for PCIE slot.
|
||||
register "PcieRpEnable[6]" = "1"
|
||||
# Enable CLKREQ#
|
||||
register "PcieRpClkReqSupport[6]" = "1"
|
||||
# Use SRCCLKREQ3#
|
||||
register "PcieRpClkReqNumber[6]" = "3"
|
||||
# Enable Advanced Error Reporting
|
||||
register "PcieRpAdvancedErrorReporting[6]" = "1"
|
||||
# Enable Latency Tolerance Reporting Mechanism
|
||||
register "PcieRpLtrEnable[6]" = "1"
|
||||
# Use CLK SRC 3
|
||||
register "PcieRpClkSrcNumber[6]" = "3"
|
||||
# Use Hot Plug subsystem
|
||||
register "PcieRpHotPlug[6]" = "1"
|
||||
|
||||
# PL2 override 91W
|
||||
register "power_limits_config" = "{
|
||||
.tdp_pl2_override = 91,
|
||||
|
|
@ -247,14 +141,49 @@ chip soc/intel/skylake
|
|||
end
|
||||
device pci 01.0 on # PEG
|
||||
subsystemid 0x1849 0x1901
|
||||
register "Peg0MaxLinkWidth" = "Peg0_x16"
|
||||
register "SkipExtGfxScan" = "0"
|
||||
|
||||
# Configure PCIe clockgen in PCH
|
||||
register "PcieRpClkReqSupport[0]" = "1"
|
||||
register "PcieRpClkReqNumber[0]" = "0"
|
||||
register "PcieRpClkSrcNumber[0]" = "0"
|
||||
end
|
||||
device pci 02.0 on # Integrated Graphics Device
|
||||
subsystemid 0x1849 0x1912
|
||||
end
|
||||
device pci 04.0 on end # Thermal Subsystem
|
||||
device pci 04.0 on # Thermal Subsystem
|
||||
register "Device4Enable" = "1"
|
||||
end
|
||||
device pci 08.0 off end # Gaussian Mixture Model
|
||||
device pci 14.0 on # USB xHCI
|
||||
subsystemid 0x1849 0xa131
|
||||
|
||||
register "usb2_ports[0]" = "USB2_PORT_MID(OC0)"
|
||||
register "usb2_ports[1]" = "USB2_PORT_MID(OC0)"
|
||||
register "usb2_ports[2]" = "USB2_PORT_MID(OC4)"
|
||||
register "usb2_ports[3]" = "USB2_PORT_MID(OC4)"
|
||||
register "usb2_ports[4]" = "USB2_PORT_MID(OC2)"
|
||||
register "usb2_ports[5]" = "USB2_PORT_MID(OC2)"
|
||||
register "usb2_ports[6]" = "USB2_PORT_MID(OC0)"
|
||||
register "usb2_ports[7]" = "USB2_PORT_MID(OC0)"
|
||||
register "usb2_ports[8]" = "USB2_PORT_MID(OC0)"
|
||||
register "usb2_ports[9]" = "USB2_PORT_MID(OC0)"
|
||||
register "usb2_ports[10]" = "USB2_PORT_MID(OC1)"
|
||||
register "usb2_ports[11]" = "USB2_PORT_MID(OC1)"
|
||||
register "usb2_ports[12]" = "USB2_PORT_MID(OC_SKIP)"
|
||||
register "usb2_ports[13]" = "USB2_PORT_MID(OC_SKIP)"
|
||||
|
||||
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)"
|
||||
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)"
|
||||
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)"
|
||||
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)"
|
||||
register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC1)"
|
||||
register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC1)"
|
||||
register "usb3_ports[6]" = "USB3_PORT_DEFAULT(OC_SKIP)"
|
||||
register "usb3_ports[7]" = "USB3_PORT_DEFAULT(OC_SKIP)"
|
||||
register "usb3_ports[8]" = "USB3_PORT_DEFAULT(OC_SKIP)"
|
||||
register "usb3_ports[9]" = "USB3_PORT_DEFAULT(OC_SKIP)"
|
||||
end
|
||||
device pci 14.1 off end # USB xDCI (OTG)
|
||||
device pci 14.2 on # Thermal Subsystem
|
||||
|
|
@ -264,8 +193,11 @@ chip soc/intel/skylake
|
|||
device pci 15.1 off end # I2C #1
|
||||
device pci 15.2 off end # I2C #2
|
||||
device pci 15.3 off end # I2C #3
|
||||
device pci 16.0 on # Management Engine Interface 1
|
||||
device pci 16.0 on # Management Engine Interface 1
|
||||
subsystemid 0x1849 0xa131
|
||||
|
||||
# FIXME: does not match devicetree!
|
||||
register "HeciEnabled" = "0"
|
||||
end
|
||||
device pci 16.1 off end # Management Engine Interface 2
|
||||
device pci 16.2 off end # Management Engine IDE-R
|
||||
|
|
@ -273,6 +205,22 @@ chip soc/intel/skylake
|
|||
device pci 16.4 off end # Management Engine Interface 3
|
||||
device pci 17.0 on # SATA
|
||||
subsystemid 0x1849 0xa102
|
||||
register "SataSalpSupport" = "1"
|
||||
# SATA4 and SATA5 are located in the lower right corner of the board,
|
||||
# but they are not populated. This is because the same PCB is used to
|
||||
# make boards with better PCHs, which can have up to six SATA ports.
|
||||
# However, the H110 PCH only has four SATA ports, which explains why
|
||||
# two connectors are missing.
|
||||
register "SataPortsEnable" = "{ \
|
||||
[0] = 1, \
|
||||
[1] = 1, \
|
||||
[2] = 1, \
|
||||
[3] = 1, \
|
||||
[4] = 0, \
|
||||
[5] = 0, \
|
||||
[6] = 0, \
|
||||
[7] = 0, \
|
||||
}"
|
||||
end
|
||||
device pci 19.0 off end # UART #2
|
||||
device pci 19.1 off end # I2C #5
|
||||
|
|
@ -281,9 +229,33 @@ chip soc/intel/skylake
|
|||
device pci 1c.1 off end # PCI Express Port 2
|
||||
device pci 1c.2 off end # PCI Express Port 3
|
||||
device pci 1c.3 off end # PCI Express Port 4
|
||||
device pci 1c.4 on end # PCI Express Port 5
|
||||
device pci 1c.5 on end # PCI Express Port 6
|
||||
device pci 1c.6 on end # PCI Express Port 7
|
||||
device pci 1c.4 on # PCI Express Port 5 - PCIE slot
|
||||
register "PcieRpEnable[4]" = "1"
|
||||
register "PcieRpClkReqSupport[4]" = "1"
|
||||
register "PcieRpClkReqNumber[4]" = "2"
|
||||
register "PcieRpAdvancedErrorReporting[4]" = "1"
|
||||
register "PcieRpLtrEnable[4]" = "1"
|
||||
register "PcieRpClkSrcNumber[4]" = "2"
|
||||
register "PcieRpHotPlug[4]" = "1"
|
||||
end
|
||||
device pci 1c.5 on # PCI Express Port 6 - Onboard LAN
|
||||
register "PcieRpEnable[5]" = "1"
|
||||
|
||||
# Disable CLKREQ#, since onboard LAN is always present
|
||||
register "PcieRpClkReqSupport[5]" = "0"
|
||||
register "PcieRpAdvancedErrorReporting[5]" = "1"
|
||||
register "PcieRpLtrEnable[5]" = "1"
|
||||
register "PcieRpClkSrcNumber[5]" = "1"
|
||||
end
|
||||
device pci 1c.6 on # PCI Express Port 7 - PCIE slot
|
||||
register "PcieRpEnable[6]" = "1"
|
||||
register "PcieRpClkReqSupport[6]" = "1"
|
||||
register "PcieRpClkReqNumber[6]" = "3"
|
||||
register "PcieRpAdvancedErrorReporting[6]" = "1"
|
||||
register "PcieRpLtrEnable[6]" = "1"
|
||||
register "PcieRpClkSrcNumber[6]" = "3"
|
||||
register "PcieRpHotPlug[6]" = "1"
|
||||
end
|
||||
device pci 1c.7 off end # PCI Express Port 8
|
||||
device pci 1d.0 off end # PCI Express Port 9
|
||||
device pci 1d.1 off end # PCI Express Port 10
|
||||
|
|
@ -295,10 +267,18 @@ chip soc/intel/skylake
|
|||
device pci 1e.3 off end # GSPI #1
|
||||
device pci 1e.4 off end # eMMC
|
||||
device pci 1e.5 off end # SDIO
|
||||
device pci 1e.6 off end # SDCard
|
||||
device pci 1f.0 on # LPC bridge
|
||||
device pci 1e.6 off # SDCard
|
||||
register "ScsSdCardEnabled" = "0"
|
||||
end
|
||||
device pci 1f.0 on # LPC bridge
|
||||
subsystemid 0x1849 0x1a43
|
||||
|
||||
# Set @0x280-0x2ff I/O Range for SuperIO HWM
|
||||
register "gen1_dec" = "0x007c0281"
|
||||
|
||||
# Set LPC Serial IRQ mode
|
||||
register "serirq_mode" = "SERIRQ_CONTINUOUS"
|
||||
|
||||
chip superio/common
|
||||
device pnp 2e.0 on # passes SIO base addr to SSDT gen
|
||||
|
||||
|
|
@ -406,7 +386,10 @@ chip soc/intel/skylake
|
|||
end # LPC Interface
|
||||
device pci 1f.1 on end # P2SB
|
||||
device pci 1f.2 on end # Power Management Controller
|
||||
device pci 1f.3 on end # Intel HDA
|
||||
device pci 1f.3 on # Intel HDA
|
||||
register "PchHdaVcType" = "Vc1"
|
||||
register "DspEnable" = "0"
|
||||
end
|
||||
device pci 1f.4 on end # SMBus
|
||||
device pci 1f.5 on end # PCH SPI
|
||||
device pci 1f.6 off end # GbE
|
||||
|
|
|
|||
Loading…
Reference in New Issue