mb/siemens/mc_apl1: Add new mainboard variant mc_apl7
This patch adds a new mainboard variant called mc_apl7 which is based on mc_apl4. So far only the names have been adjusted with no further changes. Following commits will introduce the needed changes for this mainboard variant. Test: build mc_apl7, flash to mc_apl4 and compare log level 8 output Change-Id: Ie9f2f5c29d071de442f8f3e3eaf4b3c2a6b8920f Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65283 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
Uwe Poeche
Martin L Roth
parent
af803a630a
commit
e7a68244df
|
|
@ -21,6 +21,7 @@ config VARIANT_DIR
|
|||
default "mc_apl4" if BOARD_SIEMENS_MC_APL4
|
||||
default "mc_apl5" if BOARD_SIEMENS_MC_APL5
|
||||
default "mc_apl6" if BOARD_SIEMENS_MC_APL6
|
||||
default "mc_apl7" if BOARD_SIEMENS_MC_APL7
|
||||
|
||||
config DEVICETREE
|
||||
default "variants/\$(CONFIG_VARIANT_DIR)/devicetree.cb"
|
||||
|
|
@ -32,6 +33,7 @@ config MAINBOARD_PART_NUMBER
|
|||
default "MC APL4" if BOARD_SIEMENS_MC_APL4
|
||||
default "MC APL5" if BOARD_SIEMENS_MC_APL5
|
||||
default "MC APL6" if BOARD_SIEMENS_MC_APL6
|
||||
default "MC APL7" if BOARD_SIEMENS_MC_APL7
|
||||
|
||||
config UART_FOR_CONSOLE
|
||||
default 2
|
||||
|
|
|
|||
|
|
@ -23,3 +23,7 @@ config BOARD_SIEMENS_MC_APL5
|
|||
config BOARD_SIEMENS_MC_APL6
|
||||
bool "-> MC APL6"
|
||||
select BOARD_SIEMENS_BASEBOARD_MC_APL1
|
||||
|
||||
config BOARD_SIEMENS_MC_APL7
|
||||
bool "-> MC APL7"
|
||||
select BOARD_SIEMENS_BASEBOARD_MC_APL1
|
||||
|
|
|
|||
|
|
@ -0,0 +1,32 @@
|
|||
|
||||
if BOARD_SIEMENS_MC_APL7
|
||||
|
||||
config BOARD_SPECIFIC_OPTIONS
|
||||
def_bool y
|
||||
select DRIVER_INTEL_I210
|
||||
select SOC_INTEL_SET_MIN_CLOCK_RATIO
|
||||
select MAINBOARD_HAS_TPM2
|
||||
select MEMORY_MAPPED_TPM
|
||||
select TPM_ON_FAST_SPI
|
||||
select DRIVERS_I2C_PTN3460
|
||||
select TPM_MEASURED_BOOT
|
||||
select HAS_RECOVERY_MRC_CACHE
|
||||
|
||||
config UART_FOR_CONSOLE
|
||||
default 1
|
||||
|
||||
config CBFS_SIZE
|
||||
default 0xb4e000
|
||||
|
||||
config VBOOT
|
||||
select VBOOT_VBNV_FLASH
|
||||
select VBOOT_NO_BOARD_SUPPORT
|
||||
select GBB_FLAG_DISABLE_LID_SHUTDOWN
|
||||
select GBB_FLAG_DISABLE_PD_SOFTWARE_SYNC
|
||||
select GBB_FLAG_DISABLE_EC_SOFTWARE_SYNC
|
||||
select GBB_FLAG_DISABLE_FWMP
|
||||
|
||||
config FMDFILE
|
||||
default "src/mainboard/\$(CONFIG_MAINBOARD_DIR)/mc_apl_vboot.fmd"
|
||||
|
||||
endif # BOARD_SIEMENS_MC_APL7
|
||||
|
|
@ -0,0 +1,6 @@
|
|||
bootblock-y += gpio.c
|
||||
|
||||
romstage-y += memory.c
|
||||
|
||||
ramstage-y += gpio.c
|
||||
ramstage-y += lcd_panel.c
|
||||
|
|
@ -0,0 +1,115 @@
|
|||
chip soc/intel/apollolake
|
||||
|
||||
device cpu_cluster 0 on
|
||||
device lapic 0 on end
|
||||
end
|
||||
|
||||
register "sci_irq" = "SCIS_IRQ10"
|
||||
|
||||
# EMMC TX DATA Delay 1
|
||||
# Refer to EDS-Vol2-22.3.
|
||||
# [14:8] steps of delay for HS400, each 125ps.
|
||||
# [6:0] steps of delay for SDR104/HS200, each 125ps.
|
||||
register "emmc_tx_data_cntl1" = "0x0C16"
|
||||
|
||||
# EMMC TX DATA Delay 2
|
||||
# Refer to EDS-Vol2-22.3.
|
||||
# [30:24] steps of delay for SDR50, each 125ps.
|
||||
# [22:16] steps of delay for DDR50, each 125ps.
|
||||
# [14:8] steps of delay for SDR25/HS50, each 125ps.
|
||||
# [6:0] steps of delay for SDR12, each 125ps.
|
||||
register "emmc_tx_data_cntl2" = "0x28162828"
|
||||
|
||||
# EMMC RX CMD/DATA Delay 1
|
||||
# Refer to EDS-Vol2-22.3.
|
||||
# [30:24] steps of delay for SDR50, each 125ps.
|
||||
# [22:16] steps of delay for DDR50, each 125ps.
|
||||
# [14:8] steps of delay for SDR25/HS50, each 125ps.
|
||||
# [6:0] steps of delay for SDR12, each 125ps.
|
||||
register "emmc_rx_cmd_data_cntl1" = "0x00181717"
|
||||
|
||||
# EMMC RX CMD/DATA Delay 2
|
||||
# Refer to EDS-Vol2-22.3.
|
||||
# [17:16] stands for Rx Clock before Output Buffer
|
||||
# [14:8] steps of delay for Auto Tuning Mode, each 125ps.
|
||||
# [6:0] steps of delay for HS200, each 125ps.
|
||||
register "emmc_rx_cmd_data_cntl2" = "0x10008"
|
||||
|
||||
# 0:HS400(Default), 1:HS200, 2:DDR50
|
||||
register "emmc_host_max_speed" = "1"
|
||||
|
||||
device domain 0 on
|
||||
device pci 00.0 on end # - Host Bridge
|
||||
device pci 00.1 off end # - DPTF
|
||||
device pci 00.2 off end # - NPK
|
||||
device pci 02.0 on end # - Gen - Display
|
||||
device pci 03.0 off end # - Iunit
|
||||
device pci 0d.0 on end # - P2SB
|
||||
device pci 0d.1 off end # - PMC
|
||||
device pci 0d.2 on end # - SPI
|
||||
device pci 0d.3 off end # - Shared SRAM
|
||||
device pci 0e.0 on end # - Audio
|
||||
device pci 0f.0 on end # - CSE
|
||||
device pci 11.0 on end # - ISH
|
||||
device pci 12.0 on # - SATA
|
||||
register "DisableSataSalpSupport" = "1"
|
||||
end
|
||||
device pci 13.0 on # - RP 2 - PCIe A 0
|
||||
register "pcie_rp_clkreq_pin[2]" = "CLKREQ_DISABLED"
|
||||
register "pcie_rp_hotplug_enable[2]" = "0"
|
||||
end
|
||||
device pci 13.1 on # - RP 3 - PCIe A 1
|
||||
register "pcie_rp_clkreq_pin[3]" = "CLKREQ_DISABLED"
|
||||
register "pcie_rp_hotplug_enable[3]" = "0"
|
||||
end
|
||||
device pci 13.2 on # - RP 4 - PCIe-A 2
|
||||
register "pcie_rp_clkreq_pin[4]" = "CLKREQ_DISABLED"
|
||||
register "pcie_rp_hotplug_enable[4]" = "0"
|
||||
end
|
||||
device pci 13.3 on # - RP 5 - PCIe-A 3
|
||||
register "pcie_rp_clkreq_pin[5]" = "CLKREQ_DISABLED"
|
||||
register "pcie_rp_hotplug_enable[5]" = "0"
|
||||
end
|
||||
device pci 14.0 on # - RP 0 - PCIe-B 0
|
||||
register "pcie_rp_clkreq_pin[0]" = "CLKREQ_DISABLED"
|
||||
register "pcie_rp_hotplug_enable[0]" = "0"
|
||||
end
|
||||
device pci 14.1 on # - RP 1 - PCIe-B 1
|
||||
register "pcie_rp_clkreq_pin[1]" = "CLKREQ_DISABLED"
|
||||
register "pcie_rp_hotplug_enable[1]" = "0"
|
||||
end
|
||||
device pci 15.0 on end # - XHCI
|
||||
device pci 15.1 off end # - XDCI
|
||||
device pci 16.0 on end # - I2C 0
|
||||
device pci 16.1 on end # - I2C 1
|
||||
device pci 16.2 on end # - I2C 2
|
||||
device pci 16.3 on end # - I2C 3
|
||||
device pci 17.0 on end # - I2C 4
|
||||
device pci 17.1 on end # - I2C 5
|
||||
device pci 17.2 on end # - I2C 6
|
||||
device pci 17.3 on # - I2C 7
|
||||
# Enable external display bridge (eDP to LVDS)
|
||||
chip drivers/i2c/ptn3460
|
||||
device i2c 0x60 on end # PTN3460 DP2LVDS Bridge
|
||||
end
|
||||
end
|
||||
device pci 18.0 on end # - UART 0
|
||||
device pci 18.1 on end # - UART 1
|
||||
device pci 18.2 on end # - UART 2
|
||||
device pci 18.3 on end # - UART 3
|
||||
device pci 19.0 off end # - SPI 0
|
||||
device pci 19.1 off end # - SPI 1
|
||||
device pci 19.2 off end # - SPI 2
|
||||
device pci 1a.0 off end # - PWM
|
||||
device pci 1b.0 on end # - SDCARD
|
||||
device pci 1c.0 on end # - eMMC
|
||||
device pci 1d.0 off end # - UFS
|
||||
device pci 1e.0 off end # - SDIO
|
||||
device pci 1f.0 on # - LPC
|
||||
chip drivers/pc80/tpm
|
||||
device pnp 0c31.0 on end
|
||||
end
|
||||
end
|
||||
device pci 1f.1 on end # - SMBUS
|
||||
end
|
||||
end
|
||||
|
|
@ -0,0 +1,380 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-only */
|
||||
|
||||
#include <commonlib/helpers.h>
|
||||
#include <baseboard/variants.h>
|
||||
|
||||
/*
|
||||
* Pad configuration in ramstage. The order largely follows the 'GPIO Muxing'
|
||||
* table found in EDS vol 1, but some pins aren't grouped functionally in
|
||||
* the table so those were moved for more logical grouping.
|
||||
*/
|
||||
static const struct pad_config gpio_table[] = {
|
||||
/* Southwest Community */
|
||||
|
||||
/* PCIE_WAKE[0:3]_N - unused */
|
||||
PAD_CFG_GPI(GPIO_205, UP_20K, DEEP),
|
||||
PAD_CFG_GPI(GPIO_206, UP_20K, DEEP),
|
||||
PAD_CFG_GPI(GPIO_207, UP_20K, DEEP),
|
||||
PAD_CFG_GPI(GPIO_208, UP_20K, DEEP),
|
||||
|
||||
/* EMMC interface. */
|
||||
PAD_CFG_NF(GPIO_156, DN_20K, DEEP, NF1), /* EMMC_CLK */
|
||||
PAD_CFG_NF(GPIO_157, UP_20K, DEEP, NF1), /* EMMC_D0 */
|
||||
PAD_CFG_NF(GPIO_158, UP_20K, DEEP, NF1), /* EMMC_D1 */
|
||||
PAD_CFG_NF(GPIO_159, UP_20K, DEEP, NF1), /* EMMC_D2 */
|
||||
PAD_CFG_NF(GPIO_160, UP_20K, DEEP, NF1), /* EMMC_D3 */
|
||||
PAD_CFG_NF(GPIO_161, UP_20K, DEEP, NF1), /* EMMC_D4 */
|
||||
PAD_CFG_NF(GPIO_162, UP_20K, DEEP, NF1), /* EMMC_D5 */
|
||||
PAD_CFG_NF(GPIO_163, UP_20K, DEEP, NF1), /* EMMC_D6 */
|
||||
PAD_CFG_NF(GPIO_164, UP_20K, DEEP, NF1), /* EMMC_D7 */
|
||||
PAD_CFG_NF(GPIO_165, UP_20K, DEEP, NF1), /* EMMC_CMD */
|
||||
PAD_CFG_NF(GPIO_182, DN_20K, DEEP, NF1), /* EMMC_RCLK */
|
||||
|
||||
/* SDIO - unused */
|
||||
PAD_CFG_GPI(GPIO_166, DN_20K, DEEP),
|
||||
PAD_CFG_GPI(GPIO_167, DN_20K, DEEP),
|
||||
PAD_CFG_NF(GPIO_168, UP_20K, DEEP, NF1),
|
||||
PAD_CFG_GPI(GPIO_169, DN_20K, DEEP),
|
||||
PAD_CFG_GPI(GPIO_170, DN_20K, DEEP),
|
||||
PAD_CFG_GPI(GPIO_171, DN_20K, DEEP),
|
||||
|
||||
/* SDCARD */
|
||||
PAD_CFG_NF(GPIO_172, DN_20K, DEEP, NF1), /* SDCARD_CLK */
|
||||
PAD_CFG_NF(GPIO_173, UP_20K, DEEP, NF1), /* SDCARD_D0 */
|
||||
PAD_CFG_NF(GPIO_174, UP_20K, DEEP, NF1), /* SDCARD_D1 */
|
||||
PAD_CFG_NF(GPIO_175, UP_20K, DEEP, NF1), /* SDCARD_D2 */
|
||||
PAD_CFG_NF(GPIO_176, UP_20K, DEEP, NF1), /* SDCARD_D3 */
|
||||
PAD_CFG_NF(GPIO_177, UP_20K, DEEP, NF1), /* SDCARD_CD_N */
|
||||
PAD_CFG_NF(GPIO_178, UP_20K, DEEP, NF1), /* SDCARD_CMD */
|
||||
/*
|
||||
* SDCARD_CLK_FB - APL EDS Vol1 remarks:
|
||||
* This is not a physical GPIO that can be used. This Signal is not Ball
|
||||
* out on the SoC, only the buffer exists.
|
||||
*/
|
||||
PAD_CFG_NF(GPIO_179, DN_20K, DEEP, NF1),
|
||||
PAD_CFG_NF(GPIO_186, UP_20K, DEEP, NF1), /* SDCARD_WP_1V8 */
|
||||
PAD_CFG_TERM_GPO(GPIO_183, 1, UP_20K, DEEP), /* SD_PWR_EN_1V8 */
|
||||
|
||||
/* West Community */
|
||||
|
||||
PAD_CFG_GPI(GPIO_124, DN_20K, DEEP), /* unused */
|
||||
PAD_CFG_GPI(GPIO_125, DN_20K, DEEP), /* unused */
|
||||
PAD_CFG_GPI(GPIO_126, DN_20K, DEEP), /* unused */
|
||||
PAD_CFG_GPI(GPIO_127, DN_20K, DEEP), /* unused */
|
||||
|
||||
PAD_CFG_NF(GPIO_128, NONE, DEEP, NF1), /* provided LPSS_I2C2_SDA */
|
||||
PAD_CFG_NF(GPIO_129, NONE, DEEP, NF1), /* provided LPSS_I2C2_SCL */
|
||||
|
||||
PAD_CFG_GPI(GPIO_130, DN_20K, DEEP), /* unused */
|
||||
PAD_CFG_GPI(GPIO_131, DN_20K, DEEP), /* unused */
|
||||
|
||||
PAD_CFG_NF(GPIO_132, NONE, DEEP, NF1), /* provided LPSS_I2C4_SDA */
|
||||
PAD_CFG_NF(GPIO_133, NONE, DEEP, NF1), /* provided LPSS_I2C4_SCL */
|
||||
|
||||
/*
|
||||
* Hint for USB enable power: some GPIOs are open drain outputs,
|
||||
* to drive high -> Bit GPIO_TX_DIS has to be set in combination with PU
|
||||
* PAD_CFG_GPO macro does not work. Refer to APL EDS Vol 4.
|
||||
*/
|
||||
PAD_CFG_GPI(GPIO_134, UP_20K, DEEP), /* enable USB0 power */
|
||||
PAD_CFG_GPI(GPIO_135, UP_20K, DEEP), /* unused */
|
||||
PAD_CFG_GPI(GPIO_136, UP_20K, DEEP), /* enable USB7 power */
|
||||
PAD_CFG_GPI(GPIO_137, UP_20K, DEEP), /* enable USB6 power */
|
||||
PAD_CFG_GPI(GPIO_138, UP_20K, DEEP), /* enable USB2 power */
|
||||
PAD_CFG_GPI(GPIO_139, UP_20K, DEEP), /* enable USB1 power */
|
||||
|
||||
/* ISH_GPIO_[0:9] -- unused */
|
||||
PAD_CFG_GPI(GPIO_146, DN_20K, DEEP), /* ISH_GPIO_0 */
|
||||
PAD_CFG_GPI(GPIO_147, DN_20K, DEEP), /* ISH_GPIO_1 */
|
||||
PAD_CFG_GPI(GPIO_148, DN_20K, DEEP), /* ISH_GPIO_2 */
|
||||
PAD_CFG_GPI(GPIO_149, DN_20K, DEEP), /* ISH_GPIO_3 */
|
||||
PAD_CFG_GPI(GPIO_150, DN_20K, DEEP), /* ISH_GPIO_4 */
|
||||
PAD_CFG_GPI(GPIO_151, DN_20K, DEEP), /* ISH_GPIO_5 */
|
||||
PAD_CFG_GPI(GPIO_152, DN_20K, DEEP), /* ISH_GPIO_6 */
|
||||
PAD_CFG_GPI(GPIO_153, DN_20K, DEEP), /* ISH_GPIO_7 */
|
||||
PAD_CFG_GPI(GPIO_154, DN_20K, DEEP), /* ISH_GPIO_8 */
|
||||
PAD_CFG_GPI(GPIO_155, DN_20K, DEEP), /* ISH_GPIO_9 */
|
||||
|
||||
/* PCIE_CLKREQ[0:3]_N */
|
||||
PAD_CFG_NF(GPIO_209, DN_20K, DEEP, NF1),
|
||||
PAD_CFG_NF(GPIO_210, DN_20K, DEEP, NF1),
|
||||
PAD_CFG_NF(GPIO_211, DN_20K, DEEP, NF1),
|
||||
PAD_CFG_NF(GPIO_212, DN_20K, DEEP, NF1),
|
||||
|
||||
/* OSC_CLK_OUT_[0:4] - unused */
|
||||
PAD_CFG_GPI(OSC_CLK_OUT_0, DN_20K, DEEP),
|
||||
PAD_CFG_GPI(OSC_CLK_OUT_1, DN_20K, DEEP),
|
||||
PAD_CFG_GPI(OSC_CLK_OUT_2, DN_20K, DEEP),
|
||||
PAD_CFG_GPI(OSC_CLK_OUT_3, DN_20K, DEEP),
|
||||
PAD_CFG_GPI(OSC_CLK_OUT_4, DN_20K, DEEP),
|
||||
|
||||
/* PMU Signals */
|
||||
PAD_CFG_NF(PMU_AC_PRESENT, UP_20K, DEEP, NF1),
|
||||
PAD_CFG_NF(PMU_BATLOW_B, UP_20K, DEEP, NF1),
|
||||
PAD_CFG_NF(PMU_PLTRST_B, NONE, DEEP, NF1),
|
||||
PAD_CFG_NF(PMU_PWRBTN_B, UP_20K, DEEP, NF1),
|
||||
PAD_CFG_NF(PMU_RESETBUTTON_B, NONE, DEEP, NF1),
|
||||
PAD_CFG_GPI(PMU_SLP_S0_B, UP_20K, DEEP),
|
||||
PAD_CFG_GPI(PMU_SLP_S3_B, UP_20K, DEEP),
|
||||
PAD_CFG_GPI(PMU_SLP_S4_B, UP_20K, DEEP),
|
||||
PAD_CFG_GPI(PMU_WAKE_B, DN_20K, DEEP),
|
||||
PAD_CFG_GPI(SUS_STAT_B, DN_20K, DEEP),
|
||||
PAD_CFG_GPI(SUSPWRDNACK, DN_20K, DEEP),
|
||||
|
||||
/* Northwest Community */
|
||||
|
||||
/* DDI0 SDA and SCL - Display-Port X24 */
|
||||
PAD_CFG_NF(GPIO_187, UP_20K, DEEP, NF1), /* HV_DDI0_DDC_SDA */
|
||||
PAD_CFG_NF(GPIO_188, UP_20K, DEEP, NF1), /* HV_DDI0_DDC_SCL */
|
||||
/* DDI1 SDA and SCL - unused */
|
||||
PAD_CFG_GPI(GPIO_189, DN_20K, DEEP),
|
||||
PAD_CFG_GPI(GPIO_190, DN_20K, DEEP),
|
||||
/* MIPI I2C - unused */
|
||||
PAD_CFG_GPI(GPIO_191, DN_20K, DEEP),
|
||||
PAD_CFG_GPI(GPIO_192, DN_20K, DEEP),
|
||||
|
||||
/* Panel 0 control - unused */
|
||||
PAD_CFG_GPI(GPIO_193, DN_20K, DEEP), /* PNL0_VDDEN */
|
||||
PAD_CFG_GPI(GPIO_194, DN_20K, DEEP), /* PNL0_BKLTEN */
|
||||
PAD_CFG_GPI(GPIO_195, DN_20K, DEEP), /* PNL0_BKLTCTL */
|
||||
|
||||
/* Panel 1 control - unused */
|
||||
PAD_CFG_GPI(GPIO_196, DN_20K, DEEP), /* PNL1_VDDEN */
|
||||
PAD_CFG_GPI(GPIO_197, DN_20K, DEEP), /* PNL1_BKLTEN */
|
||||
PAD_CFG_GPI(GPIO_198, DN_20K, DEEP), /* PNL1_BKLTCTL */
|
||||
|
||||
/* DDI[0:1]_HPD */
|
||||
PAD_CFG_GPI(GPIO_199, UP_20K, DEEP), /* DDI1_HPD unused */
|
||||
PAD_CFG_NF(GPIO_200, UP_20K, DEEP, NF2), /* DDI0_HDP X24 */
|
||||
|
||||
/* MDSI signals - unused */
|
||||
PAD_CFG_GPI(GPIO_201, DN_20K, DEEP), /* MDSI_A_TE */
|
||||
PAD_CFG_GPI(GPIO_202, DN_20K, DEEP), /* MDSI_C_TE */
|
||||
|
||||
/* USB overcurrent pins. */
|
||||
PAD_CFG_NF(GPIO_203, UP_20K, DEEP, NF1), /* USB_OC0_N */
|
||||
PAD_CFG_NF(GPIO_204, UP_20K, DEEP, NF1), /* USB_OC1_N */
|
||||
|
||||
/* PMC SPI */
|
||||
PAD_CFG_GPI(PMC_SPI_FS0, DN_20K, DEEP), /* unused */
|
||||
PAD_CFG_NF(PMC_SPI_FS1, UP_20K, DEEP, NF2), /* XHPD_EDP_APL */
|
||||
PAD_CFG_GPI(PMC_SPI_FS2, DN_20K, DEEP), /* unused */
|
||||
PAD_CFG_GPI(PMC_SPI_RXD, DN_20K, DEEP), /* unused */
|
||||
PAD_CFG_GPI(PMC_SPI_TXD, DN_20K, DEEP), /* unused */
|
||||
PAD_CFG_GPI(PMC_SPI_CLK, DN_20K, DEEP), /* unused */
|
||||
|
||||
/* PMIC Signals unused signals related to an old PMIC interface. */
|
||||
PAD_CFG_NF(PMIC_PWRGOOD, DN_20K, DEEP, NF1), /* PMIC_PWRGOOD */
|
||||
PAD_CFG_GPI(PMIC_RESET_B, DN_20K, DEEP), /* PMIC_RESET_B */
|
||||
PAD_CFG_GPI(GPIO_213, UP_20K, DEEP), /* PMIC_SDWN_B */
|
||||
PAD_CFG_GPI(GPIO_214, DN_20K, DEEP), /* PMIC_BCUDISW2 */
|
||||
PAD_CFG_GPI(GPIO_215, DN_20K, DEEP), /* PMIC_BCUDISCRIT */
|
||||
PAD_CFG_NF(PMIC_THERMTRIP_B, UP_20K, DEEP, NF1),/* THERMTRIP_N */
|
||||
PAD_CFG_GPI(PMIC_STDBY, DN_20K, DEEP), /* PMIC_STDBY */
|
||||
PAD_CFG_NF(PROCHOT_B, UP_20K, DEEP, NF1), /* PROCHOT_N */
|
||||
PAD_CFG_GPI(PMIC_I2C_SCL, DN_20K, DEEP), /* unused */
|
||||
PAD_CFG_GPI(PMIC_I2C_SDA, DN_20K, DEEP), /* unused */
|
||||
|
||||
/* I2S1 - unused */
|
||||
PAD_CFG_GPI(GPIO_74, DN_20K, DEEP), /* I2S1_MCLK */
|
||||
PAD_CFG_GPI(GPIO_75, DN_20K, DEEP), /* I2S1_BCLK */
|
||||
PAD_CFG_GPI(GPIO_76, DN_20K, DEEP), /* I2S1_WS_SYNC */
|
||||
PAD_CFG_GPI(GPIO_77, DN_20K, DEEP), /* I2S1_SDI */
|
||||
PAD_CFG_GPI(GPIO_78, DN_20K, DEEP), /* I2S1_SDO */
|
||||
|
||||
/* DMIC or I2S4 - unused */
|
||||
PAD_CFG_GPI(GPIO_79, DN_20K, DEEP), /* AVS_M_CLK_A1 */
|
||||
PAD_CFG_GPI(GPIO_80, DN_20K, DEEP), /* AVS_M_CLK_B1 */
|
||||
PAD_CFG_GPI(GPIO_81, DN_20K, DEEP), /* AVS_M_DATA_1 */
|
||||
PAD_CFG_GPI(GPIO_82, DN_20K, DEEP), /* AVS_M_CLK_AB2 */
|
||||
PAD_CFG_GPI(GPIO_83, DN_20K, DEEP), /* AVS_M_DATA_2 */
|
||||
|
||||
/* I2S2 - unused */
|
||||
PAD_CFG_GPO(GPIO_84, 0, DEEP), /* AVS_I2S2_MCLK */
|
||||
PAD_CFG_GPI(GPIO_85, DN_20K, DEEP), /* AVS_I2S2_BCLK */
|
||||
PAD_CFG_GPI(GPIO_86, DN_20K, DEEP), /* AVS_I2S2_WS_SYNC */
|
||||
PAD_CFG_GPI(GPIO_87, DN_20K, DEEP), /* AVS_I2S2_SDI */
|
||||
PAD_CFG_GPI(GPIO_88, DN_20K, DEEP), /* AVS_I2S2_SDO */
|
||||
|
||||
/* I2S3 - unused */
|
||||
PAD_CFG_GPI(GPIO_89, DN_20K, DEEP), /* AVS_I2S3_BCLK */
|
||||
PAD_CFG_GPI(GPIO_90, DN_20K, DEEP), /* AVS_I2S3_WS_SYNC */
|
||||
PAD_CFG_GPI(GPIO_91, DN_20K, DEEP), /* AVS_I2S3_SDI */
|
||||
PAD_CFG_GPI(GPIO_92, DN_20K, DEEP), /* AVS_I2S3_SDO */
|
||||
|
||||
/* Fast SPI for mainboard Flash and TPM on mainboard. */
|
||||
PAD_CFG_NF(GPIO_97, NATIVE, DEEP, NF1), /* FST_SPI_CS0_B */
|
||||
PAD_CFG_GPI(GPIO_98, DN_20K, DEEP), /* FST_SPI_CS1_B - unused */
|
||||
PAD_CFG_NF(GPIO_99, NATIVE, DEEP, NF1), /* FST_SPI_MOSI_IO0 */
|
||||
PAD_CFG_NF(GPIO_100, NATIVE, DEEP, NF1),/* FST_SPI_MISO_IO1 */
|
||||
PAD_CFG_NF(GPIO_101, NATIVE, DEEP, NF1),/* FST_IO2 - MEM_CONFIG0 */
|
||||
PAD_CFG_NF(GPIO_102, NATIVE, DEEP, NF1),/* FST_IO3 - MEM_CONFIG1 */
|
||||
PAD_CFG_NF(GPIO_103, NATIVE, DEEP, NF1),/* FST_SPI_CLK */
|
||||
/* FST_SPI_CLK_FB - Pad not bonded, default register value is the same
|
||||
* as here. Refer to Intel Doc APL EDS Vol 1 */
|
||||
PAD_CFG_NF(FST_SPI_CLK_FB, NONE, DEEP, NF1),
|
||||
|
||||
/* SIO_SPI_0 for F-module on mainboard */
|
||||
PAD_CFG_NF(GPIO_104, DN_20K, DEEP, NF1),
|
||||
PAD_CFG_NF(GPIO_105, UP_20K, DEEP, NF1),
|
||||
/* GPIO_106 configured as XCS for TPM */
|
||||
PAD_CFG_NF(GPIO_106, UP_20K, DEEP, NF3),
|
||||
PAD_CFG_NF(GPIO_109, UP_20K, DEEP, NF1),
|
||||
PAD_CFG_NF(GPIO_110, UP_20K, DEEP, NF1),
|
||||
|
||||
/* SIO_SPI_1 -- unused */
|
||||
PAD_CFG_GPI(GPIO_111, DN_20K, DEEP), /* GP_SSP_1_CLK */
|
||||
PAD_CFG_GPI(GPIO_112, DN_20K, DEEP), /* GP_SSP_1_FS0 */
|
||||
PAD_CFG_GPI(GPIO_113, DN_20K, DEEP), /* GP_SSP_1_FS1 */
|
||||
PAD_CFG_GPI(GPIO_116, DN_20K, DEEP), /* GP_SSP_1_RXD */
|
||||
PAD_CFG_GPI(GPIO_117, DN_20K, DEEP), /* GP_SSP_1_TXD */
|
||||
|
||||
/* SIO_SPI_2 -- unused */
|
||||
PAD_CFG_GPI(GPIO_118, UP_20K, DEEP), /* GP_SSP_2_CLK */
|
||||
PAD_CFG_GPI(GPIO_119, DN_20K, DEEP), /* GP_SSP_2_FS0 */
|
||||
PAD_CFG_GPI(GPIO_120, DN_20K, DEEP), /* GP_SSP_2_FS1 */
|
||||
PAD_CFG_GPI(GPIO_121, DN_20K, DEEP), /* GP_SSP_2_FS2 */
|
||||
PAD_CFG_GPI(GPIO_122, DN_20K, DEEP), /* GP_SSP_2_RXD */
|
||||
PAD_CFG_GPI(GPIO_123, DN_20K, DEEP), /* GP_SSP_2_TXD */
|
||||
|
||||
/* North Community */
|
||||
|
||||
PAD_CFG_GPI(GPIO_0, DN_20K, DEEP),
|
||||
/* GPIO_1 in early_gpio_table */
|
||||
PAD_CFG_GPI(GPIO_2, DN_20K, DEEP),
|
||||
/* GPIO_3,4 in early_gpio_table */
|
||||
PAD_CFG_GPI(GPIO_5, DN_20K, DEEP), /* TRACE_0_DATA4_VNN */
|
||||
PAD_CFG_GPI(GPIO_6, DN_20K, DEEP), /* TRACE_0_DATA5_VNN */
|
||||
PAD_CFG_GPO(GPIO_7, 0, DEEP),
|
||||
PAD_CFG_GPI(GPIO_8, DN_20K, DEEP),
|
||||
PAD_CFG_GPI(GPIO_9, DN_20K, DEEP),
|
||||
PAD_CFG_GPI(GPIO_10, DN_20K, DEEP),
|
||||
PAD_CFG_GPI(GPIO_11, DN_20K, DEEP),
|
||||
PAD_CFG_GPI(GPIO_12, DN_20K, DEEP),
|
||||
PAD_CFG_GPI(GPIO_13, DN_20K, DEEP),
|
||||
PAD_CFG_GPI(GPIO_14, DN_20K, DEEP),
|
||||
PAD_CFG_GPI(GPIO_15, DN_20K, DEEP),
|
||||
PAD_CFG_GPI(GPIO_16, DN_20K, DEEP),
|
||||
PAD_CFG_GPI(GPIO_17, DN_20K, DEEP),
|
||||
PAD_CFG_GPI(GPIO_18, DN_20K, DEEP),
|
||||
PAD_CFG_GPI(GPIO_19, DN_20K, DEEP),
|
||||
PAD_CFG_GPI(GPIO_20, DN_20K, DEEP),
|
||||
PAD_CFG_GPO(GPIO_21, 0, DEEP), /* activate SMARC Ethernetmac 2 */
|
||||
PAD_CFG_GPO(GPIO_22, 0, DEEP), /* activate SMARC Ethernetmac 1 */
|
||||
PAD_CFG_GPI(GPIO_23, DN_20K, DEEP), /* pin open */
|
||||
PAD_CFG_GPI(GPIO_24, DN_20K, DEEP), /* pin open */
|
||||
PAD_CFG_GPI(GPIO_25, DN_20K, DEEP), /* pin open */
|
||||
PAD_CFG_NF(GPIO_26, UP_20K, DEEP, NF5), /* SATA_LEDN */
|
||||
PAD_CFG_GPI(GPIO_27, DN_20K, DEEP), /* pin open */
|
||||
PAD_CFG_GPO(GPIO_28, 1, DEEP), /* disable SMARC HDMI */
|
||||
PAD_CFG_GPO(GPIO_29, 0, DEEP),
|
||||
PAD_CFG_GPI(GPIO_30, DN_20K, DEEP), /* pin open */
|
||||
PAD_CFG_GPI(GPIO_31, DN_20K, DEEP), /* pin open */
|
||||
PAD_CFG_GPI(GPIO_32, DN_20K, DEEP), /* pin open */
|
||||
PAD_CFG_GPI(GPIO_33, DN_20K, DEEP), /* pin open */
|
||||
PAD_CFG_GPI(GPIO_34, DN_20K, DEEP), /* pin open */
|
||||
PAD_CFG_GPI(GPIO_35, DN_20K, DEEP), /* pin open */
|
||||
PAD_CFG_GPI(GPIO_36, DN_20K, DEEP), /* pin open */
|
||||
PAD_CFG_GPI(GPIO_37, DN_20K, DEEP), /* pin open */
|
||||
PAD_CFG_GPI(GPIO_38, DN_20K, DEEP), /* pin open */
|
||||
PAD_CFG_GPI(GPIO_39, DN_20K, DEEP), /* pin open */
|
||||
PAD_CFG_GPI(GPIO_40, DN_20K, DEEP), /* pin open */
|
||||
|
||||
/* LPSS_UART[0:2] */
|
||||
PAD_CFG_GPI(GPIO_41, DN_20K, DEEP), /* pin open */
|
||||
/* GPIO_42/43 are in early_gpio_table */
|
||||
PAD_CFG_GPI(GPIO_44, DN_20K, DEEP), /* LPSS_UART1_RTS - unused */
|
||||
PAD_CFG_GPI(GPIO_45, DN_20K, DEEP), /* LPSS_UART1_CTS - unused */
|
||||
/* GPIO_46/47 are in early_gpio_table */
|
||||
PAD_CFG_GPI(GPIO_48, DN_20K, DEEP), /* LPSS_UART2_RTS - unused */
|
||||
PAD_CFG_GPI(GPIO_49, DN_20K, DEEP), /* LPSS_UART2_CTS - unused */
|
||||
|
||||
/* Camera interface -- completely unused. */
|
||||
PAD_CFG_GPI(GPIO_62, DN_20K, DEEP), /* pin open */
|
||||
PAD_CFG_GPI(GPIO_63, DN_20K, DEEP), /* pin open */
|
||||
PAD_CFG_GPI(GPIO_64, DN_20K, DEEP), /* pin open */
|
||||
PAD_CFG_GPI(GPIO_65, DN_20K, DEEP), /* pin open */
|
||||
PAD_CFG_GPI(GPIO_66, DN_20K, DEEP), /* pin open */
|
||||
PAD_CFG_GPI(GPIO_67, DN_20K, DEEP), /* pin open */
|
||||
PAD_CFG_GPO(GPIO_68, 0, DEEP), /* APL7 Testpoint P403 */
|
||||
PAD_CFG_GPO(GPIO_69, 0, DEEP), /* APL7 Testpoint P404 */
|
||||
PAD_CFG_GPI(GPIO_70, DN_20K, DEEP), /* pin open */
|
||||
PAD_CFG_GPO(GPIO_71, 1, DEEP), /* XCHC_UPD_REQ */
|
||||
PAD_CFG_GPO(GPIO_72, 0, DEEP), /* APL7 Testpoint P402 */
|
||||
PAD_CFG_GPI(GPIO_73, DN_20K, DEEP), /* pin open */
|
||||
|
||||
/* no TAP controller pins available on SMARC of APL7 */
|
||||
PAD_CFG_NF(TCK, DN_20K, DEEP, NF1), /* pin open */
|
||||
PAD_CFG_NF(TRST_B, DN_20K, DEEP, NF1), /* pin open */
|
||||
PAD_CFG_NF(TMS, DN_20K, DEEP, NF1), /* pin open */
|
||||
PAD_CFG_NF(TDI, DN_20K, DEEP, NF1), /* pin open */
|
||||
|
||||
PAD_CFG_NF(CX_PMODE, DN_20K, DEEP, NF1), /* pin open */
|
||||
PAD_CFG_NF(CX_PREQ_B, DN_20K, DEEP, NF1), /* pin open */
|
||||
PAD_CFG_NF(JTAGX, DN_20K, DEEP, NF1), /* pin open */
|
||||
PAD_CFG_NF(CX_PRDY_B, DN_20K, DEEP, NF1), /* pin open */
|
||||
PAD_CFG_NF(TDO, DN_20K, DEEP, NF1), /* pin open */
|
||||
|
||||
/* GPIO_[216:219] described into EDS Vol1. */
|
||||
PAD_CFG_GPO(CNV_BRI_DT, 0, DEEP), /* Disable eDP to LVDS bridge */
|
||||
PAD_CFG_GPI(CNV_BRI_RSP, UP_20K, DEEP),
|
||||
PAD_CFG_GPI(CNV_RGI_DT, DN_20K, DEEP), /* pin open */
|
||||
|
||||
/* Writing to following GPIO registers leads to 0xFFFF FFFF in CFG0/1 */
|
||||
PAD_CFG_NF(CNV_RGI_RSP, DN_20K, DEEP, NF1), /* pin open */
|
||||
|
||||
/* Serial Voltage Identification */
|
||||
PAD_CFG_NF(SVID0_ALERT_B, NONE, DEEP, NF1), /* SVID0_ALERT_B */
|
||||
PAD_CFG_NF(SVID0_DATA, UP_20K, DEEP, NF1), /* SVID0_DATA */
|
||||
PAD_CFG_NF(SVID0_CLK, UP_20K, DEEP, NF1), /* SVID0_CLK */
|
||||
};
|
||||
|
||||
const struct pad_config *variant_gpio_table(size_t *num)
|
||||
{
|
||||
*num = ARRAY_SIZE(gpio_table);
|
||||
return gpio_table;
|
||||
}
|
||||
|
||||
/* GPIOs needed prior to ramstage. */
|
||||
static const struct pad_config early_gpio_table[] = {
|
||||
/* UART */
|
||||
PAD_CFG_NF(GPIO_46, NATIVE, DEEP, NF1), /* LPSS_UART2_RXD */
|
||||
PAD_CFG_NF_IOSSTATE(GPIO_47, NATIVE, DEEP, NF1, Tx1RxDCRx0), /* LPSS_UART2_TXD */
|
||||
|
||||
/* Southwest Community */
|
||||
|
||||
/* Multiplexed I2C7 */
|
||||
PAD_CFG_NF(SMB_ALERTB, UP_20K, DEEP, NF2),
|
||||
PAD_CFG_NF(SMB_CLK, UP_20K, DEEP, NF2),
|
||||
PAD_CFG_NF(SMB_DATA, UP_20K, DEEP, NF2),
|
||||
|
||||
/* get LPC Bus early working */
|
||||
PAD_CFG_NF(LPC_ILB_SERIRQ, UP_20K, DEEP, NF1),
|
||||
PAD_CFG_NF(LPC_CLKOUT0, NONE, DEEP, NF1),
|
||||
PAD_CFG_NF(LPC_CLKOUT1, NONE, DEEP, NF1),
|
||||
PAD_CFG_NF(LPC_AD0, UP_20K, DEEP, NF1),
|
||||
PAD_CFG_NF(LPC_AD1, UP_20K, DEEP, NF1),
|
||||
PAD_CFG_NF(LPC_AD2, UP_20K, DEEP, NF1),
|
||||
PAD_CFG_NF(LPC_AD3, UP_20K, DEEP, NF1),
|
||||
PAD_CFG_NF(LPC_CLKRUNB, UP_20K, DEEP, NF1),
|
||||
PAD_CFG_NF(LPC_FRAMEB, UP_20K, DEEP, NF1),
|
||||
|
||||
/* North Community */
|
||||
PAD_CFG_GPO(GPIO_1, 1, DEEP), /* XPCIE_A_RST */
|
||||
PAD_CFG_GPO(GPIO_3, 1, DEEP), /* XPCIE_B_RST */
|
||||
PAD_CFG_GPO(GPIO_4, 1, DEEP), /* XPCIE_C_RST */
|
||||
|
||||
/* UARTs for early coreboot output */
|
||||
PAD_CFG_NF(GPIO_42, UP_20K, DEEP, NF1), /* LPSS_UART1_RXD */
|
||||
PAD_CFG_NF(GPIO_43, UP_20K, DEEP, NF1), /* LPSS_UART1_TXD */
|
||||
PAD_CFG_NF(GPIO_46, UP_20K, DEEP, NF1), /* LPSS_UART2_RXD */
|
||||
PAD_CFG_NF(GPIO_47, UP_20K, DEEP, NF1), /* LPSS_UART2_TXD */
|
||||
|
||||
PAD_CFG_NF(PMU_SUSCLK, NONE, DEEP, NF1),/* 32,78 kHz used on SMARC */
|
||||
};
|
||||
|
||||
const struct pad_config *variant_early_gpio_table(size_t *num)
|
||||
{
|
||||
*num = ARRAY_SIZE(early_gpio_table);
|
||||
return early_gpio_table;
|
||||
}
|
||||
|
|
@ -0,0 +1,90 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-only */
|
||||
|
||||
#include <console/console.h>
|
||||
#include <device/device.h>
|
||||
#include <drivers/i2c/ptn3460/ptn3460.h>
|
||||
#include <hwilib.h>
|
||||
#include <types.h>
|
||||
|
||||
/** \brief This function provides EDID data to the driver for DP2LVDS Bridge (PTN3460)
|
||||
* @param edid_data pointer to EDID data in driver
|
||||
*/
|
||||
enum cb_err mb_get_edid(uint8_t edid_data[0x80])
|
||||
{
|
||||
const char *hwi_block = "hwinfo.hex";
|
||||
|
||||
if (hwilib_find_blocks(hwi_block) != CB_SUCCESS) {
|
||||
printk(BIOS_ERR, "LCD: Info block \"%s\" not found!\n", hwi_block);
|
||||
return CB_ERR;
|
||||
}
|
||||
|
||||
/* Get EDID data from hwinfo block */
|
||||
if (hwilib_get_field(Edid, edid_data, PTN_EDID_LEN) != PTN_EDID_LEN) {
|
||||
printk(BIOS_ERR, "LCD: No EDID data available in %s\n", hwi_block);
|
||||
return CB_ERR;
|
||||
}
|
||||
return CB_SUCCESS;
|
||||
}
|
||||
|
||||
/** \brief This function provides EDID block [0..6] to the driver for DP2LVDS Bridge (PTN3460)
|
||||
* which has to be used.
|
||||
*/
|
||||
uint8_t mb_select_edid_table(void)
|
||||
{
|
||||
return 6; /* With this mainboard we use EDID block 6 for emulation in PTN3460. */
|
||||
}
|
||||
|
||||
/** \brief Function to enable mainboard to adjust the config data of PTN3460.
|
||||
* @param *cfg_ptr Pointer to the PTN config structure to modify.
|
||||
* @return -1 on error; PTN_CFG_MODIFIED if data was modified and needs to be updated.
|
||||
*/
|
||||
int mb_adjust_cfg(struct ptn_3460_config *cfg)
|
||||
{
|
||||
const char *hwi_block = "hwinfo.hex";
|
||||
uint8_t disp_con = 0, color_depth = 0;
|
||||
|
||||
if (hwilib_find_blocks(hwi_block) != CB_SUCCESS) {
|
||||
printk(BIOS_ERR, "LCD: Info block \"%s\" not found!\n", hwi_block);
|
||||
return -1;
|
||||
}
|
||||
|
||||
if (hwilib_get_field(PF_DisplCon, &disp_con, sizeof(disp_con)) != sizeof(disp_con)) {
|
||||
printk(BIOS_ERR, "LCD: Missing panel features from %s\n", hwi_block);
|
||||
return -1;
|
||||
}
|
||||
if (hwilib_get_field(PF_Color_Depth, &color_depth,
|
||||
sizeof(color_depth)) != sizeof(color_depth)) {
|
||||
printk(BIOS_ERR, "LCD: Missing panel features from %s\n", hwi_block);
|
||||
return -1;
|
||||
}
|
||||
/* Set up configuration data according to the hwinfo block we got. */
|
||||
cfg->dp_interface_ctrl = 0x00;
|
||||
/* Use odd-bus for clock distribution only. */
|
||||
cfg->lvds_interface_ctrl1 = 0x01;
|
||||
if (disp_con == PF_DISPLCON_LVDS_DUAL) {
|
||||
/* Turn on dual LVDS lane and clock. */
|
||||
cfg->lvds_interface_ctrl1 |= 0x0b;
|
||||
}
|
||||
if (color_depth == PF_COLOR_DEPTH_6BIT) {
|
||||
/* Use 18 bits per pixel. */
|
||||
cfg->lvds_interface_ctrl1 |= 0x20;
|
||||
}
|
||||
/* No clock spreading, 300 mV LVDS swing. */
|
||||
cfg->lvds_interface_ctrl2 = 0x03;
|
||||
/* Swap LVDS lanes (N vs. P). */
|
||||
cfg->lvds_interface_ctrl3 = 0x04;
|
||||
/* Delay T2 (VDD to LVDS active) by 16 ms. */
|
||||
cfg->t2_delay = 1;
|
||||
/* 500 ms from LVDS to backlight active. */
|
||||
cfg->t3_timing = 10;
|
||||
/* 1 second re-power delay. */
|
||||
cfg->t12_timing = 20;
|
||||
/* 150 ms backlight off to LVDS inactive. */
|
||||
cfg->t4_timing = 3;
|
||||
/* Delay T5 (LVDS to VDD inactive) by 16 ms. */
|
||||
cfg->t5_delay = 1;
|
||||
/* Enable backlight control. */
|
||||
cfg->backlight_ctrl = 0;
|
||||
|
||||
return PTN_CFG_MODIFIED;
|
||||
}
|
||||
|
|
@ -0,0 +1,54 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-only */
|
||||
|
||||
#include <baseboard/variants.h>
|
||||
#include <commonlib/helpers.h>
|
||||
#include <soc/meminit.h>
|
||||
|
||||
const struct lpddr4_swizzle_cfg mc_apl7_lpddr4_swizzle = {
|
||||
/* CH0_DQA[0:31] SoC pins -> U22 LPDDR4 module pins */
|
||||
.phys[LP4_PHYS_CH0A] = {
|
||||
/* DQA[0:7] pins of LPDDR4 module. */
|
||||
.dqs[LP4_DQS0] = { 0, 1, 5, 3, 4, 7, 6, 2 },
|
||||
/* DQA[8:15] pins of LPDDR4 module. */
|
||||
.dqs[LP4_DQS1] = { 11, 15, 14, 9, 8, 12, 13, 10 },
|
||||
/* DQB[0:7] pins of LPDDR4 module with offset of 16. */
|
||||
.dqs[LP4_DQS2] = { 16, 22, 23, 21, 19, 17, 18, 20 },
|
||||
/* DQB[7:15] pins of LPDDR4 module with offset of 16. */
|
||||
.dqs[LP4_DQS3] = { 30, 26, 31, 25, 24, 27, 28, 29 },
|
||||
},
|
||||
.phys[LP4_PHYS_CH0B] = {
|
||||
/* DQA[0:7] pins of LPDDR4 module. */
|
||||
.dqs[LP4_DQS0] = { 7, 3, 2, 1, 4, 0, 6, 5 },
|
||||
/* DQA[8:15] pins of LPDDR4 module. */
|
||||
.dqs[LP4_DQS1] = { 14, 8, 9, 15, 10, 13, 12, 11 },
|
||||
/* DQB[0:7] pins of LPDDR4 module with offset of 16. */
|
||||
.dqs[LP4_DQS2] = { 23, 21, 20, 16, 19, 17, 18, 22 },
|
||||
/* DQB[7:15] pins of LPDDR4 module with offset of 16. */
|
||||
.dqs[LP4_DQS3] = { 24, 25, 26, 28, 29, 31, 30, 27 },
|
||||
},
|
||||
.phys[LP4_PHYS_CH1A] = {
|
||||
/* DQA[0:7] pins of LPDDR4 module. */
|
||||
.dqs[LP4_DQS0] = { 6, 3, 1, 7, 4, 2, 5, 0 },
|
||||
/* DQA[8:15] pins of LPDDR4 module. */
|
||||
.dqs[LP4_DQS1] = { 14, 15, 12, 13, 11, 8, 10, 9 },
|
||||
/* DQB[0:7] pins of LPDDR4 module with offset of 16. */
|
||||
.dqs[LP4_DQS2] = { 16, 22, 17, 18, 20, 21, 23, 19 },
|
||||
/* DQB[7:15] pins of LPDDR4 module with offset of 16. */
|
||||
.dqs[LP4_DQS3] = { 31, 28, 26, 25, 29, 24, 27, 30 },
|
||||
},
|
||||
.phys[LP4_PHYS_CH1B] = {
|
||||
/* DQA[0:7] pins of LPDDR4 module. */
|
||||
.dqs[LP4_DQS0] = { 3, 5, 7, 4, 1, 0, 6, 2 },
|
||||
/* DQA[8:15] pins of LPDDR4 module. */
|
||||
.dqs[LP4_DQS1] = { 14, 13, 10, 11, 15, 9, 8, 12 },
|
||||
/* DQB[0:7] pins of LPDDR4 module with offset of 16. */
|
||||
.dqs[LP4_DQS2] = { 23, 18, 19, 22, 16, 17, 21, 20 },
|
||||
/* DQB[7:15] pins of LPDDR4 module with offset of 16. */
|
||||
.dqs[LP4_DQS3] = { 24, 31, 30, 29, 26, 27, 25, 28 },
|
||||
},
|
||||
};
|
||||
|
||||
const struct lpddr4_swizzle_cfg *variant_lpddr4_swizzle_config(void)
|
||||
{
|
||||
return &mc_apl7_lpddr4_swizzle;
|
||||
}
|
||||
Loading…
Reference in New Issue