mb/google/dedede/var/beadrix: Add LTE modem support
This change adds LTE modem for beadrix. BUG=b:204882915 BRANCH=dedede TEST=Build and boot beadrix, check with command modem status Change-Id: I7acb88634478ff486810b2c3fc14d6739c3268e1 Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61328 Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
parent
507064b835
commit
eaee04b4a1
|
@ -5,9 +5,14 @@
|
||||||
|
|
||||||
/* Pad configuration in ramstage */
|
/* Pad configuration in ramstage */
|
||||||
static const struct pad_config gpio_table[] = {
|
static const struct pad_config gpio_table[] = {
|
||||||
|
/* A10 : WWAN_EN */
|
||||||
|
PAD_CFG_GPO(GPP_A10, 1, PWROK),
|
||||||
/* A11 : TOUCH_RPT_EN ==> NC */
|
/* A11 : TOUCH_RPT_EN ==> NC */
|
||||||
PAD_NC(GPP_A11, NONE),
|
PAD_NC(GPP_A11, NONE),
|
||||||
|
|
||||||
|
/* B7 : PCIE_CLKREQ2_N ==> WWAN_SAR_DETECT_ODL */
|
||||||
|
PAD_CFG_GPO(GPP_B7, 1, DEEP),
|
||||||
|
|
||||||
/* C18 : AP_I2C_EMR_SDA ==> NC */
|
/* C18 : AP_I2C_EMR_SDA ==> NC */
|
||||||
PAD_NC(GPP_C18, NONE),
|
PAD_NC(GPP_C18, NONE),
|
||||||
/* C19 : AP_I2C_EMR_SCL ==> NC */
|
/* C19 : AP_I2C_EMR_SCL ==> NC */
|
||||||
|
@ -15,6 +20,8 @@ static const struct pad_config gpio_table[] = {
|
||||||
/* C22 : UART2_RTS_N ==> NC */
|
/* C22 : UART2_RTS_N ==> NC */
|
||||||
PAD_NC(GPP_C22, NONE),
|
PAD_NC(GPP_C22, NONE),
|
||||||
|
|
||||||
|
/* D0 : WWAN_HOST_WAKE ==> WWAN_WDISABLE_L */
|
||||||
|
PAD_CFG_GPO(GPP_D0, 1, DEEP),
|
||||||
/* D12 : WCAM_RST_L ==> NC */
|
/* D12 : WCAM_RST_L ==> NC */
|
||||||
PAD_NC(GPP_D12, NONE),
|
PAD_NC(GPP_D12, NONE),
|
||||||
/* D13 : EN_PP2800_CAMERA ==> NC */
|
/* D13 : EN_PP2800_CAMERA ==> NC */
|
||||||
|
@ -58,6 +65,8 @@ static const struct pad_config gpio_table[] = {
|
||||||
|
|
||||||
/* H1 : EN_PP3300_SD_U ==> NC */
|
/* H1 : EN_PP3300_SD_U ==> NC */
|
||||||
PAD_NC(GPP_H1, NONE),
|
PAD_NC(GPP_H1, NONE),
|
||||||
|
/* H17 : WWAN_RST_L */
|
||||||
|
PAD_CFG_GPO(GPP_H17, 0, PLTRST),
|
||||||
};
|
};
|
||||||
|
|
||||||
const struct pad_config *variant_override_gpio_table(size_t *num)
|
const struct pad_config *variant_override_gpio_table(size_t *num)
|
||||||
|
|
|
@ -49,6 +49,16 @@ chip soc/intel/jasperlake
|
||||||
register "type" = "UPC_TYPE_INTERNAL"
|
register "type" = "UPC_TYPE_INTERNAL"
|
||||||
device usb 2.5 on end
|
device usb 2.5 on end
|
||||||
end
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""LTE""
|
||||||
|
register "type" = "UPC_TYPE_INTERNAL"
|
||||||
|
register "has_power_resource" = "1"
|
||||||
|
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H17)"
|
||||||
|
register "reset_off_delay_ms" = "20"
|
||||||
|
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)"
|
||||||
|
register "enable_delay_ms" = "20"
|
||||||
|
device usb 3.3 on end
|
||||||
|
end
|
||||||
end
|
end
|
||||||
end
|
end
|
||||||
end # USB xHCI
|
end # USB xHCI
|
||||||
|
|
Loading…
Reference in New Issue