This is the final patch to enable the msm800sev to build. This patch
adds a symbol to the model_lx/cache_as_ram.inc, and modifies some files in the mainboard directory. This patch has been tested but there is a remaining problem which I am tracking down. Expect one more patch to "get it all working". Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2638 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Ronald G. Minnich
parent
5ef8b0f62b
commit
fa6c11eb40
|
|
@ -177,6 +177,7 @@ DCacheSetupGood:
|
||||||
|
|
||||||
/* Go do early init and memory setup */
|
/* Go do early init and memory setup */
|
||||||
call cache_as_ram_main
|
call cache_as_ram_main
|
||||||
|
done_cache_as_ram_main:
|
||||||
|
|
||||||
/* If you wanted to maintain the stack in memory you would need to set the tags as dirty
|
/* If you wanted to maintain the stack in memory you would need to set the tags as dirty
|
||||||
so the wbinvd would push out the old stack contents to memory */
|
so the wbinvd would push out the old stack contents to memory */
|
||||||
|
|
|
||||||
|
|
@ -44,30 +44,21 @@ arch i386 end
|
||||||
|
|
||||||
driver mainboard.o
|
driver mainboard.o
|
||||||
|
|
||||||
if HAVE_PIRQ_TABLE object irq_tables.o end
|
if HAVE_PIRQ_TABLE
|
||||||
#object reset.o
|
object irq_tables.o
|
||||||
|
|
||||||
##
|
|
||||||
## Romcc output
|
|
||||||
##
|
|
||||||
makerule ./failover.E
|
|
||||||
depends "$(MAINBOARD)/failover.c ./romcc"
|
|
||||||
action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
|
|
||||||
end
|
end
|
||||||
|
|
||||||
makerule ./failover.inc
|
if USE_DCACHE_RAM
|
||||||
depends "$(MAINBOARD)/failover.c ./romcc"
|
#compile cache_as_ram.c to auto.inc
|
||||||
action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
|
makerule ./cache_as_ram_auto.inc
|
||||||
|
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
|
||||||
|
action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
|
||||||
|
action "perl -e 's/.rodata/.rom.data/g' -pi $@"
|
||||||
|
action "perl -e 's/.text/.section .rom.text/g' -pi $@"
|
||||||
|
end
|
||||||
end
|
end
|
||||||
|
|
||||||
makerule ./auto.E
|
|
||||||
depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
|
|
||||||
action "./romcc -E -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
|
|
||||||
end
|
|
||||||
makerule ./auto.inc
|
|
||||||
depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
|
|
||||||
action "./romcc -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
|
|
||||||
end
|
|
||||||
|
|
||||||
##
|
##
|
||||||
## Build our 16 bit and 32 bit linuxBIOS entry code
|
## Build our 16 bit and 32 bit linuxBIOS entry code
|
||||||
|
|
@ -104,7 +95,7 @@ ldscript /arch/i386/lib/id.lds
|
||||||
###
|
###
|
||||||
if USE_FALLBACK_IMAGE
|
if USE_FALLBACK_IMAGE
|
||||||
ldscript /arch/i386/lib/failover.lds
|
ldscript /arch/i386/lib/failover.lds
|
||||||
mainboardinit ./failover.inc
|
# mainboardinit ./failover.inc
|
||||||
end
|
end
|
||||||
|
|
||||||
###
|
###
|
||||||
|
|
@ -115,7 +106,11 @@ end
|
||||||
## Setup RAM
|
## Setup RAM
|
||||||
##
|
##
|
||||||
mainboardinit cpu/x86/fpu/enable_fpu.inc
|
mainboardinit cpu/x86/fpu/enable_fpu.inc
|
||||||
mainboardinit ./auto.inc
|
|
||||||
|
if USE_DCACHE_RAM
|
||||||
|
mainboardinit cpu/amd/model_lx/cache_as_ram.inc
|
||||||
|
mainboardinit ./cache_as_ram_auto.inc
|
||||||
|
end
|
||||||
|
|
||||||
##
|
##
|
||||||
## Include the secondary Configuration files
|
## Include the secondary Configuration files
|
||||||
|
|
@ -124,57 +119,88 @@ dir /pc80
|
||||||
config chip.h
|
config chip.h
|
||||||
|
|
||||||
chip northbridge/amd/lx
|
chip northbridge/amd/lx
|
||||||
# they keep changing this. 0:f.0 5c.w to see where it is
|
device pci_domain 0 on
|
||||||
register "irqmap" = "0xbaba"
|
device pci 1.0 on end
|
||||||
register "setupflash" = "0"
|
device pci 1.1 on end
|
||||||
|
chip southbridge/amd/cs5536
|
||||||
|
# IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK
|
||||||
|
# SIRQ Mode = Active(Quiet) mode. Save power....
|
||||||
|
# Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK
|
||||||
|
# How to get these? Boot linux and do this:
|
||||||
|
# rdmsr 0x51400025
|
||||||
|
register "lpc_serirq_enable" = "0x000010da"
|
||||||
|
# rdmsr 0x5140004e -- polairy is high 16 bits of low 32 bits
|
||||||
|
register "lpc_serirq_polarity" = "0x0000EF25"
|
||||||
|
# mode is high 10 bits (determined from code)
|
||||||
|
register "lpc_serirq_mode" = "1"
|
||||||
|
# Don't yet know how to find this.
|
||||||
|
register "enable_gpio_int_route" = "0x0D0C0700"
|
||||||
|
register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash
|
||||||
|
register "enable_USBP4_device" = "0" #0: host, 1:device
|
||||||
|
register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
|
||||||
|
register "com1_enable" = "0"
|
||||||
|
register "com1_address" = "0x3F8"
|
||||||
|
register "com1_irq" = "4"
|
||||||
|
register "com2_enable" = "0"
|
||||||
|
register "com2_address" = "0x2F8"
|
||||||
|
register "com2_irq" = "3"
|
||||||
|
register "unwanted_vpci[0]" = "0" # End of list has a zero
|
||||||
|
device pci f.0 on # ISA Bridge
|
||||||
|
chip superio/winbond/w83627hf
|
||||||
|
device pnp 2e.0 off # Floppy
|
||||||
|
io 0x60 = 0x3f0
|
||||||
|
irq 0x70 = 6
|
||||||
|
drq 0x74 = 2
|
||||||
|
end
|
||||||
|
device pnp 2e.1 off # Parallel Port
|
||||||
|
io 0x60 = 0x378
|
||||||
|
irq 0x70 = 7
|
||||||
|
end
|
||||||
|
device pnp 2e.2 on # Com1
|
||||||
|
io 0x60 = 0x3f8
|
||||||
|
irq 0x70 = 4
|
||||||
|
end
|
||||||
|
device pnp 2e.3 on # Com2
|
||||||
|
io 0x60 = 0x2f8
|
||||||
|
irq 0x70 = 3
|
||||||
|
end
|
||||||
|
device pnp 2e.5 on # Keyboard
|
||||||
|
io 0x60 = 0x60
|
||||||
|
io 0x62 = 0x64
|
||||||
|
irq 0x70 = 1
|
||||||
|
irq 0x72 = 12
|
||||||
|
end
|
||||||
|
device pnp 2e.6 off # CIR
|
||||||
|
io 0x60 = 0x100
|
||||||
|
end
|
||||||
|
device pnp 2e.7 off # GAME_MIDI_GIPO1
|
||||||
|
io 0x60 = 0x220
|
||||||
|
io 0x62 = 0x300
|
||||||
|
irq 0x70 = 9
|
||||||
|
end
|
||||||
|
device pnp 2e.8 off end # GPIO2
|
||||||
|
device pnp 2e.9 off end # GPIO3
|
||||||
|
device pnp 2e.a off end # ACPI
|
||||||
|
device pnp 2e.b on # HW Monitor
|
||||||
|
io 0x60 = 0x290
|
||||||
|
irq 0x70 = 5
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device pci f.1 on end # Flash controller
|
||||||
|
device pci f.2 on end # IDE controller
|
||||||
|
device pci f.3 on end # Audio
|
||||||
|
device pci f.4 on end # OHCI
|
||||||
|
device pci f.5 on end # EHCI
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
# APIC cluster is late CPU init.
|
||||||
device apic_cluster 0 on
|
device apic_cluster 0 on
|
||||||
chip cpu/amd/model_lx
|
chip cpu/amd/model_lx
|
||||||
device apic 0 on end
|
device apic 0 on end
|
||||||
end
|
end
|
||||||
end
|
end
|
||||||
device pci_domain 0 on
|
|
||||||
device pci 1.0 on end
|
|
||||||
device pci 1.1 on end
|
|
||||||
chip southbridge/amd/cs5536_lx
|
|
||||||
register "isa_irq" = "0"
|
|
||||||
#register "flash_irq" = "14"
|
|
||||||
|
|
||||||
## IDE IRQ
|
|
||||||
register "enable_ide_irq" = "0"
|
|
||||||
|
|
||||||
register "audio_irq" = "5"
|
|
||||||
register "usb_irq" = "7"
|
|
||||||
|
|
||||||
register "uart0_irq" = "0"
|
|
||||||
register "uart1_irq" = "4"
|
|
||||||
|
|
||||||
## PCI INTA ... INTD and their GPIO pins
|
|
||||||
## int==0: disable
|
|
||||||
register "pci_int[0]" = "0"
|
|
||||||
register "pci_int[1]" = "10"
|
|
||||||
register "pci_int[2]" = "0"
|
|
||||||
register "pci_int[3]" = "0"
|
|
||||||
register "pci_int_pin[0]" = "0"
|
|
||||||
register "pci_int_pin[1]" = "7"
|
|
||||||
register "pci_int_pin[2]" = "0"
|
|
||||||
register "pci_int_pin[3]" = "0"
|
|
||||||
|
|
||||||
|
|
||||||
# Keyboard Emulation Logic IRQs
|
|
||||||
# Enable keyboard IRQ2
|
|
||||||
register "enable_kel_keyb_irq" = "0"
|
|
||||||
# Enable mouse IRQ12
|
|
||||||
register "enable_kel_mouse_irq" = "0"
|
|
||||||
# Configure KEL Emulation IRQ, 0 to disable
|
|
||||||
register "kel_emul_irq" = "0"
|
|
||||||
|
|
||||||
device pci f.0 on end # ISA Bridge
|
|
||||||
device pci f.1 on end # Flash controller
|
|
||||||
device pci f.2 off end # IDE controller
|
|
||||||
device pci f.3 on end # Audio
|
|
||||||
device pci f.4 on end # OHCI
|
|
||||||
device pci f.5 on end # EHCI
|
|
||||||
end
|
|
||||||
end
|
|
||||||
end
|
end
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -21,7 +21,9 @@ uses ROM_IMAGE_SIZE
|
||||||
uses ROM_SECTION_SIZE
|
uses ROM_SECTION_SIZE
|
||||||
uses ROM_SECTION_OFFSET
|
uses ROM_SECTION_OFFSET
|
||||||
uses CONFIG_ROM_PAYLOAD_START
|
uses CONFIG_ROM_PAYLOAD_START
|
||||||
|
uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
|
||||||
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
|
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
|
||||||
|
uses CONFIG_PRECOMPRESSED_PAYLOAD
|
||||||
uses PAYLOAD_SIZE
|
uses PAYLOAD_SIZE
|
||||||
uses _ROMBASE
|
uses _ROMBASE
|
||||||
uses _RAMBASE
|
uses _RAMBASE
|
||||||
|
|
@ -43,18 +45,20 @@ uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
|
||||||
uses CONFIG_CONSOLE_VGA
|
uses CONFIG_CONSOLE_VGA
|
||||||
uses CONFIG_PCI_ROM_RUN
|
uses CONFIG_PCI_ROM_RUN
|
||||||
uses CONFIG_VIDEO_MB
|
uses CONFIG_VIDEO_MB
|
||||||
|
uses USE_DCACHE_RAM
|
||||||
default CONFIG_VIDEO_MB=8
|
uses DCACHE_RAM_BASE
|
||||||
|
uses DCACHE_RAM_SIZE
|
||||||
|
|
||||||
## ROM_SIZE is the size of boot ROM that this board will use.
|
## ROM_SIZE is the size of boot ROM that this board will use.
|
||||||
default ROM_SIZE = 1024*1024
|
default ROM_SIZE = 256*1024
|
||||||
|
|
||||||
###
|
###
|
||||||
### Build options
|
### Build options
|
||||||
###
|
###
|
||||||
#default CONFIG_CONSOLE_VGA=1
|
default CONFIG_CONSOLE_VGA=0
|
||||||
#default CONFIG_PCI_ROM_RUN=0
|
default CONFIG_VIDEO_MB=8
|
||||||
|
default CONFIG_PCI_ROM_RUN=0
|
||||||
|
|
||||||
##
|
##
|
||||||
## Build code for the fallback boot
|
## Build code for the fallback boot
|
||||||
##
|
##
|
||||||
|
|
@ -78,9 +82,8 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
|
||||||
##
|
##
|
||||||
## Build code to export a programmable irq routing table
|
## Build code to export a programmable irq routing table
|
||||||
##
|
##
|
||||||
default HAVE_PIRQ_TABLE=0
|
default HAVE_PIRQ_TABLE=1
|
||||||
default IRQ_SLOT_COUNT=6
|
default IRQ_SLOT_COUNT=6
|
||||||
|
|
||||||
#object irq_tables.o
|
#object irq_tables.o
|
||||||
|
|
||||||
##
|
##
|
||||||
|
|
@ -96,6 +99,13 @@ default HAVE_OPTION_TABLE=0
|
||||||
default ROM_IMAGE_SIZE = 65536
|
default ROM_IMAGE_SIZE = 65536
|
||||||
default FALLBACK_SIZE = 131072
|
default FALLBACK_SIZE = 131072
|
||||||
|
|
||||||
|
##
|
||||||
|
## enable CACHE_AS_RAM specifics
|
||||||
|
##
|
||||||
|
default USE_DCACHE_RAM=1
|
||||||
|
default DCACHE_RAM_BASE=0xc8000
|
||||||
|
default DCACHE_RAM_SIZE=0x08000
|
||||||
|
|
||||||
##
|
##
|
||||||
## Use a small 8K stack
|
## Use a small 8K stack
|
||||||
##
|
##
|
||||||
|
|
|
||||||
|
|
@ -1,3 +1,4 @@
|
||||||
|
#if 0
|
||||||
/* This file was generated by getpir.c, do not modify!
|
/* This file was generated by getpir.c, do not modify!
|
||||||
(but if you do, please run checkpir on it to verify)
|
(but if you do, please run checkpir on it to verify)
|
||||||
* Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up
|
* Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up
|
||||||
|
|
@ -58,3 +59,107 @@ unsigned long write_pirq_routing_table(unsigned long addr)
|
||||||
{
|
{
|
||||||
return copy_pirq_routing_table(addr);
|
return copy_pirq_routing_table(addr);
|
||||||
}
|
}
|
||||||
|
#endif
|
||||||
|
/*
|
||||||
|
* This file is part of the LinuxBIOS project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2007 Advanced Micro Devices
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License version 2 as
|
||||||
|
* published by the Free Software Foundation.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <arch/pirq_routing.h>
|
||||||
|
#include <console/console.h>
|
||||||
|
#include <arch/io.h>
|
||||||
|
#include <arch/pirq_routing.h>
|
||||||
|
#include "../../../southbridge/amd/cs5536/cs5536.h"
|
||||||
|
|
||||||
|
/* Platform IRQs */
|
||||||
|
#define PIRQA 11
|
||||||
|
#define PIRQB 5
|
||||||
|
#define PIRQC 10
|
||||||
|
#define PIRQD 10
|
||||||
|
|
||||||
|
/* Map */
|
||||||
|
#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */
|
||||||
|
#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */
|
||||||
|
#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */
|
||||||
|
#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */
|
||||||
|
|
||||||
|
/* Link */
|
||||||
|
#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */
|
||||||
|
#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */
|
||||||
|
#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */
|
||||||
|
#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */
|
||||||
|
|
||||||
|
const struct irq_routing_table intel_irq_routing_table = {
|
||||||
|
PIRQ_SIGNATURE, /* u32 signature */
|
||||||
|
PIRQ_VERSION, /* u16 version */
|
||||||
|
32+16*IRQ_SLOT_COUNT, /* there can be total 6 devices on the bus */
|
||||||
|
0x00, /* Where the interrupt router lies (bus) */
|
||||||
|
(0x0F<<3)|0x0, /* Where the interrupt router lies (dev) */
|
||||||
|
0x00, /* IRQs devoted exclusively to PCI usage */
|
||||||
|
0x100B, /* Vendor */
|
||||||
|
0x002B, /* Device */
|
||||||
|
0, /* Crap (miniport) */
|
||||||
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
|
||||||
|
0x00, /* u8 checksum , this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
|
||||||
|
{
|
||||||
|
/* If you change the number of entries, change the IRQ_SLOT_COUNT above! */
|
||||||
|
/* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
|
||||||
|
{0x00,(0x01<<3)|0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* cpu */
|
||||||
|
{0x00,(0x0F<<3)|0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */
|
||||||
|
{0x00,(0x0C<<3)|0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}}, 0x1, 0x0}, /* slot1 */
|
||||||
|
{0x00,(0x0D<<3)|0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x2, 0x0}, /* slot2 */
|
||||||
|
{0x00,(0x0A<<3)|0x0, {{L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}}, 0x3, 0x0}, /* slot3 */
|
||||||
|
{0x00,(0x0B<<3)|0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x4, 0x0}, /* slot4 */
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
unsigned long write_pirq_routing_table(unsigned long addr){
|
||||||
|
int i, j, k, num_entries;
|
||||||
|
unsigned int pirq[4];
|
||||||
|
uint16_t chipset_irq_map;
|
||||||
|
uint32_t pciAddr, pirtable_end;
|
||||||
|
struct irq_routing_table *pirq_tbl;
|
||||||
|
|
||||||
|
pirtable_end = copy_pirq_routing_table(addr);
|
||||||
|
|
||||||
|
/* Set up chipset IRQ steering */
|
||||||
|
pciAddr = 0x80000000 | (CHIPSET_DEV_NUM << 11) | 0x5C;
|
||||||
|
chipset_irq_map = (PIRQD << 12 | PIRQC << 8 | PIRQB << 4 | PIRQA);
|
||||||
|
printk_debug("%s(%08X, %04X)\n", __FUNCTION__, pciAddr, chipset_irq_map);
|
||||||
|
outl(pciAddr & ~3, 0xCF8);
|
||||||
|
outl(chipset_irq_map, 0xCFC);
|
||||||
|
|
||||||
|
pirq_tbl = (struct irq_routing_table *)(addr);
|
||||||
|
num_entries = (pirq_tbl->size - 32)/16;
|
||||||
|
|
||||||
|
/* Set PCI IRQs */
|
||||||
|
for (i=0; i < num_entries; i++){
|
||||||
|
printk_debug("PIR Entry %d Dev/Fn: %X Slot: %d\n", i, pirq_tbl->slots[i].devfn, pirq_tbl->slots[i].slot);
|
||||||
|
for (j = 0; j < 4; j++){
|
||||||
|
printk_debug("INT: %c bitmap: %x ", 'A'+j, pirq_tbl->slots[i].irq[j].bitmap);
|
||||||
|
for (k = 0; (!((pirq_tbl->slots[i].irq[j].bitmap >> k) & 1)) && (pirq_tbl->slots[i].irq[j].bitmap != 0); k++); /* finds lsb in bitmap to IRQ# */
|
||||||
|
pirq[j] = k;
|
||||||
|
printk_debug("PIRQ: %d\n", k);
|
||||||
|
}
|
||||||
|
pci_assign_irqs(pirq_tbl->slots[i].bus, pirq_tbl->slots[i].devfn, pirq); /* bus, device, slots IRQs for {A,B,C,D} */
|
||||||
|
}
|
||||||
|
|
||||||
|
/* put the PIR table in memory and checksum */
|
||||||
|
return pirtable_end;
|
||||||
|
}
|
||||||
|
|
@ -6,54 +6,140 @@
|
||||||
#include <arch/io.h>
|
#include <arch/io.h>
|
||||||
#include <cpu/x86/msr.h>
|
#include <cpu/x86/msr.h>
|
||||||
#include <cpu/amd/lxdef.h>
|
#include <cpu/amd/lxdef.h>
|
||||||
|
#include "../../../southbridge/amd/cs5536/cs5536.h"
|
||||||
#include "chip.h"
|
#include "chip.h"
|
||||||
|
|
||||||
#define DIVIL_LBAR_GPIO 0x5140000c
|
/* Print the platform configuration */
|
||||||
static void init_gpio()
|
void print_conf(void) {
|
||||||
{
|
#if DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR
|
||||||
|
int i;
|
||||||
|
unsigned long iol;
|
||||||
msr_t msr;
|
msr_t msr;
|
||||||
printk_debug("Initializing GPIO module...\n");
|
|
||||||
|
|
||||||
// initialize the GPIO LBAR
|
int cpu_msr_defs[] = { CPU_BC_L2_CONF, CPU_IM_CONFIG,
|
||||||
msr.lo = GPIO_BASE;
|
CPU_DM_CONFIG0, CPU_RCONF_DEFAULT,
|
||||||
msr.hi = 0x0000f001;
|
CPU_RCONF_BYPASS, CPU_RCONF_A0_BF, CPU_RCONF_C0_DF, CPU_RCONF_E0_FF,
|
||||||
wrmsr(DIVIL_LBAR_GPIO, msr);
|
CPU_RCONF_SMM, CPU_RCONF_DMM, GLCP_DELAY_CONTROLS, GL_END
|
||||||
msr = rdmsr(DIVIL_LBAR_GPIO);
|
};
|
||||||
printk_debug("DIVIL_LBAR_GPIO set to 0x%08x 0x%08x\n", msr.hi, msr.lo);
|
|
||||||
|
int gliu0_msr_defs[] = {MSR_GLIU0_BASE1, MSR_GLIU0_BASE2, MSR_GLIU0_BASE4, MSR_GLIU0_BASE5, MSR_GLIU0_BASE6,
|
||||||
|
GLIU0_P2D_BMO_0, GLIU0_P2D_BMO_1, MSR_GLIU0_SYSMEM,
|
||||||
|
GLIU0_P2D_RO_0, GLIU0_P2D_RO_1, GLIU0_P2D_RO_2, MSR_GLIU0_SHADOW,
|
||||||
|
GLIU0_IOD_BM_0, GLIU0_IOD_BM_1, GLIU0_IOD_BM_2,
|
||||||
|
GLIU0_IOD_SC_0, GLIU0_IOD_SC_1, GLIU0_IOD_SC_2, GLIU0_IOD_SC_3, GLIU0_IOD_SC_4, GLIU0_IOD_SC_5,
|
||||||
|
GLIU0_GLD_MSR_COH, GL_END
|
||||||
|
};
|
||||||
|
|
||||||
|
int gliu1_msr_defs[] = {MSR_GLIU1_BASE1, MSR_GLIU1_BASE2, MSR_GLIU1_BASE3, MSR_GLIU1_BASE4, MSR_GLIU1_BASE5, MSR_GLIU1_BASE6,
|
||||||
|
MSR_GLIU1_BASE7, MSR_GLIU1_BASE8, MSR_GLIU1_BASE9, MSR_GLIU1_BASE10,
|
||||||
|
GLIU1_P2D_R_0, GLIU1_P2D_R_1, GLIU1_P2D_R_2, GLIU1_P2D_R_3, MSR_GLIU1_SHADOW,
|
||||||
|
GLIU1_IOD_BM_0, GLIU1_IOD_BM_1, GLIU1_IOD_BM_2,
|
||||||
|
GLIU1_IOD_SC_0, GLIU1_IOD_SC_1, GLIU1_IOD_SC_2, GLIU1_IOD_SC_3,
|
||||||
|
GLIU1_GLD_MSR_COH, GL_END
|
||||||
|
};
|
||||||
|
|
||||||
|
int rconf_msr[] = { CPU_RCONF0, CPU_RCONF1, CPU_RCONF2, CPU_RCONF3, CPU_RCONF4,
|
||||||
|
CPU_RCONF5, CPU_RCONF6, CPU_RCONF7, GL_END
|
||||||
|
};
|
||||||
|
|
||||||
|
int cs5536_msr[] = { MDD_LBAR_GPIO, MDD_LBAR_FLSH0, MDD_LBAR_FLSH1, MDD_LEG_IO, MDD_PIN_OPT,
|
||||||
|
MDD_IRQM_ZLOW, MDD_IRQM_ZHIGH, MDD_IRQM_PRIM, GL_END
|
||||||
|
};
|
||||||
|
|
||||||
|
int pci_msr[] = { GLPCI_CTRL, GLPCI_ARB, GLPCI_REN, GLPCI_A0_BF, GLPCI_C0_DF, GLPCI_E0_FF,
|
||||||
|
GLPCI_RC0, GLPCI_RC1, GLPCI_RC2, GLPCI_RC3, GLPCI_ExtMSR, GLPCI_SPARE,
|
||||||
|
GL_END
|
||||||
|
};
|
||||||
|
|
||||||
|
int dma_msr[] = { MDD_DMA_MAP, MDD_DMA_SHAD1, MDD_DMA_SHAD2, MDD_DMA_SHAD3, MDD_DMA_SHAD4,
|
||||||
|
MDD_DMA_SHAD5, MDD_DMA_SHAD6, MDD_DMA_SHAD7, MDD_DMA_SHAD8,
|
||||||
|
MDD_DMA_SHAD9, GL_END
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
printk_debug("---------- CPU ------------\n");
|
||||||
|
|
||||||
|
for(i = 0; cpu_msr_defs[i] != GL_END; i++) {
|
||||||
|
msr = rdmsr(cpu_msr_defs[i]);
|
||||||
|
printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", cpu_msr_defs[i], msr.hi, msr.lo);
|
||||||
|
}
|
||||||
|
|
||||||
|
printk_debug("---------- GLIU 0 ------------\n");
|
||||||
|
|
||||||
|
for(i = 0; gliu0_msr_defs[i] != GL_END; i++) {
|
||||||
|
msr = rdmsr(gliu0_msr_defs[i]);
|
||||||
|
printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", gliu0_msr_defs[i], msr.hi, msr.lo);
|
||||||
|
}
|
||||||
|
|
||||||
|
printk_debug("---------- GLIU 1 ------------\n");
|
||||||
|
|
||||||
|
for(i = 0; gliu1_msr_defs[i] != GL_END; i++) {
|
||||||
|
msr = rdmsr(gliu1_msr_defs[i]);
|
||||||
|
printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", gliu1_msr_defs[i], msr.hi, msr.lo);
|
||||||
|
}
|
||||||
|
|
||||||
|
printk_debug("---------- RCONF ------------\n");
|
||||||
|
|
||||||
|
for(i = 0; rconf_msr[i] != GL_END; i++) {
|
||||||
|
msr = rdmsr(rconf_msr[i]);
|
||||||
|
printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", rconf_msr[i], msr.hi, msr.lo);
|
||||||
|
}
|
||||||
|
|
||||||
|
printk_debug("---------- VARIA ------------\n");
|
||||||
|
msr = rdmsr(0x51300010);
|
||||||
|
printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", 0x51300010, msr.hi, msr.lo);
|
||||||
|
|
||||||
|
msr = rdmsr(0x51400015);
|
||||||
|
printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", 0x51400015, msr.hi, msr.lo);
|
||||||
|
|
||||||
|
printk_debug("---------- DIVIL IRQ ------------\n");
|
||||||
|
msr = rdmsr(MDD_IRQM_YLOW);
|
||||||
|
printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_YLOW, msr.hi, msr.lo);
|
||||||
|
msr = rdmsr(MDD_IRQM_YHIGH);
|
||||||
|
printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_YHIGH, msr.hi, msr.lo);
|
||||||
|
msr = rdmsr(MDD_IRQM_ZLOW);
|
||||||
|
printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_ZLOW, msr.hi, msr.lo);
|
||||||
|
msr = rdmsr(MDD_IRQM_ZHIGH);
|
||||||
|
printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_ZHIGH, msr.hi, msr.lo);
|
||||||
|
|
||||||
|
|
||||||
|
printk_debug("---------- PCI ------------\n");
|
||||||
|
|
||||||
|
for(i = 0; pci_msr[i] != GL_END; i++) {
|
||||||
|
msr = rdmsr(pci_msr[i]);
|
||||||
|
printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", pci_msr[i], msr.hi, msr.lo);
|
||||||
|
}
|
||||||
|
|
||||||
|
printk_debug("---------- LPC/UART DMA ------------\n");
|
||||||
|
|
||||||
|
for(i = 0; dma_msr[i] != GL_END; i++) {
|
||||||
|
msr = rdmsr(dma_msr[i]);
|
||||||
|
printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", dma_msr[i], msr.hi, msr.lo);
|
||||||
|
}
|
||||||
|
|
||||||
|
printk_debug("---------- CS5536 ------------\n");
|
||||||
|
|
||||||
|
for(i = 0; cs5536_msr[i] != GL_END; i++) {
|
||||||
|
msr = rdmsr(cs5536_msr[i]);
|
||||||
|
printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", cs5536_msr[i], msr.hi, msr.lo);
|
||||||
|
}
|
||||||
|
|
||||||
|
iol = inl(GPIOL_INPUT_ENABLE);
|
||||||
|
printk_debug("IOR 0x%08X is now 0x%08X\n", GPIOL_INPUT_ENABLE, iol);
|
||||||
|
iol = inl(GPIOL_EVENTS_ENABLE);
|
||||||
|
printk_debug("IOR 0x%08X is now 0x%08X\n", GPIOL_EVENTS_ENABLE, iol);
|
||||||
|
iol = inl(GPIOL_INPUT_INVERT_ENABLE);
|
||||||
|
printk_debug("IOR 0x%08X is now 0x%08X\n", GPIOL_INPUT_INVERT_ENABLE, iol);
|
||||||
|
iol = inl(GPIO_MAPPER_X);
|
||||||
|
printk_debug("IOR 0x%08X is now 0x%08X\n", GPIO_MAPPER_X, iol);
|
||||||
|
#endif //DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR
|
||||||
}
|
}
|
||||||
|
|
||||||
|
static void init(struct device *dev) {
|
||||||
|
|
||||||
static void init(struct device *dev)
|
printk_debug("MSM800SEV ENTER %s\n", __FUNCTION__);
|
||||||
{
|
|
||||||
unsigned bus = 0;
|
|
||||||
unsigned devNic = PCI_DEVFN(0xd, 0);
|
|
||||||
unsigned devUsb = PCI_DEVFN(0xf, 4);
|
|
||||||
device_t usb = NULL, nic = NULL;
|
|
||||||
unsigned char irqUsb = 0xa, irqNic = 0xb;
|
|
||||||
|
|
||||||
printk_debug("DIGITALLOGIC MSM800SSEV ENTER %s\n", __FUNCTION__);
|
printk_debug("MSM800SEV EXIT %s\n", __FUNCTION__);
|
||||||
|
|
||||||
#if 0
|
|
||||||
// FIXME: do we need to initialize USB OHCI this way?
|
|
||||||
printk_debug("%s (%x,%x) set USB PCI interrupt line to %d\n",
|
|
||||||
__FUNCTION__, bus, devUsb, irqUsb);
|
|
||||||
|
|
||||||
// initialize the USB controller
|
|
||||||
usb = dev_find_slot(bus, devUsb);
|
|
||||||
if (!usb) printk_err("Could not find USB\n");
|
|
||||||
else pci_write_config8(usb, PCI_INTERRUPT_LINE, irqUsb);
|
|
||||||
|
|
||||||
printk_debug("%s (%x,%x) set NIC PCI interrupt line to %d\n",
|
|
||||||
__FUNCTION__, bus, devNic, irqNic);
|
|
||||||
|
|
||||||
// initialize theEEPRO 100
|
|
||||||
nic = dev_find_slot(bus, devNic);
|
|
||||||
if (!nic) printk_err("Could not find USB\n");
|
|
||||||
else pci_write_config8(nic, PCI_INTERRUPT_LINE, irqNic);
|
|
||||||
#endif
|
|
||||||
init_gpio();
|
|
||||||
|
|
||||||
printk_debug("DIGITALLOGIC MSM800SSEV EXIT %s\n", __FUNCTION__);
|
|
||||||
}
|
}
|
||||||
|
|
||||||
static void enable_dev(struct device *dev)
|
static void enable_dev(struct device *dev)
|
||||||
|
|
|
||||||
|
|
@ -7,8 +7,9 @@ option CONFIG_COMPRESSED_PAYLOAD_NRV2B=0
|
||||||
|
|
||||||
## ROM_SIZE is the total number of bytes allocated for LinuxBIOS use
|
## ROM_SIZE is the total number of bytes allocated for LinuxBIOS use
|
||||||
## (normal AND fallback images and payloads).
|
## (normal AND fallback images and payloads).
|
||||||
## leave 64k for vsa and 32K for video ROM
|
## leave 36k for vsa
|
||||||
option ROM_SIZE = 1024*1024 - 64*1024 - 32 * 1024
|
##
|
||||||
|
option ROM_SIZE = 1024*1024 - 36 * 1024
|
||||||
|
|
||||||
## ROM_IMAGE_SIZE is the maximum number of bytes allowed for a LinuxBIOS image,
|
## ROM_IMAGE_SIZE is the maximum number of bytes allowed for a LinuxBIOS image,
|
||||||
## not including any payload.
|
## not including any payload.
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue