disable watchdog, and it goes much better!
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2200 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
parent
a83b9762fc
commit
fb7f4cf410
|
@ -43,7 +43,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl)
|
||||||
#include "sdram/generic_sdram.c"
|
#include "sdram/generic_sdram.c"
|
||||||
|
|
||||||
#define PLLMSRhi 0x00000226
|
#define PLLMSRhi 0x00000226
|
||||||
#define PLLMSRlo 0x81000048
|
#define PLLMSRlo 0x00000008
|
||||||
#define PLLMSRlo1 ((0xde << 16) | (1 << 26) | (1 << 24))
|
#define PLLMSRlo1 ((0xde << 16) | (1 << 26) | (1 << 24))
|
||||||
#define PLLMSRlo2 ((1<<14) |(1<<13) | (1<<0))
|
#define PLLMSRlo2 ((1<<14) |(1<<13) | (1<<0))
|
||||||
#include "northbridge/amd/gx2/pll_reset.c"
|
#include "northbridge/amd/gx2/pll_reset.c"
|
||||||
|
@ -80,6 +80,7 @@ static void main(unsigned long bist)
|
||||||
static const struct mem_controller memctrl [] = {
|
static const struct mem_controller memctrl [] = {
|
||||||
{.channel0 = {(0xa<<3)|0, (0xa<<3)|1}}
|
{.channel0 = {(0xa<<3)|0, (0xa<<3)|1}}
|
||||||
};
|
};
|
||||||
|
unsigned char temp;
|
||||||
|
|
||||||
msr_init();
|
msr_init();
|
||||||
|
|
||||||
|
@ -97,7 +98,38 @@ static void main(unsigned long bist)
|
||||||
sdram_initialize(1, memctrl);
|
sdram_initialize(1, memctrl);
|
||||||
|
|
||||||
print_err("Done sdram_initialize\n");
|
print_err("Done sdram_initialize\n");
|
||||||
|
print_err("Disable watchdog\n");
|
||||||
|
outb( 0x87, 0x4E); //enter SuperIO configuration mode
|
||||||
|
outb( 0x87, 0x4E);
|
||||||
|
|
||||||
|
|
||||||
|
outb(0x20, 0x4e);
|
||||||
|
temp = inb(0x4f);
|
||||||
|
print_debug_hex8(temp);
|
||||||
|
if (temp != 0x52){
|
||||||
|
print_err("CAN NOT READ SUPERIO VID\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
outb(0x29, 0x4e);
|
||||||
|
outb(0x7c, 0x4f);
|
||||||
|
|
||||||
|
outb( 0x07, 0x4E); //enable logical device 9
|
||||||
|
outb( 0x09, 0x4F);
|
||||||
|
outb(0x30, 0x4e);
|
||||||
|
outb(1, 0x4f);
|
||||||
|
outb( 0xF0, 0x4E); //set GP33 as outbut in configuration register F0h Bit4 = \u20180\u2019
|
||||||
|
outb( 0xC7, 0x4F);
|
||||||
|
outb( 0xF1, 0x4E); //clr GP33 (Bit4) value in cofiguration register F1h to \u20181\u2019 disables
|
||||||
|
temp = inb(0x4F); //watchdog function. Make sure to let the other Bits unchanged!
|
||||||
|
print_debug_hex8(temp);print_debug(":");
|
||||||
|
temp = temp & ~8;
|
||||||
|
outb( temp, 0x4F);
|
||||||
|
temp = inb(0x4F); //watchdog function. Make sure to let the other Bits unchanged!
|
||||||
|
print_debug_hex8(temp);print_debug("\n");
|
||||||
/* Check all of memory */
|
/* Check all of memory */
|
||||||
|
// ram_check(0, 16384);
|
||||||
|
ram_check(0x20000, 0x24000);
|
||||||
|
print_err("Let's go loopy\n");
|
||||||
ram_check(0x00000000, 640*1024);
|
ram_check(0x00000000, 640*1024);
|
||||||
|
|
||||||
}
|
}
|
||||||
|
|
Loading…
Reference in New Issue