We were looking for the wrong file for some time. With bootstrapping
enabled, this resulted in a spurious message about the host GCC being
already built.
Change-Id: Ieb52c5925ea5615c83311319f22693b72f4987f9
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/18776
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Default values taken from the datasheet and from the dump of
an uninitialized F71808A on a Sapphire Pure Platinum H61.
Both the control registers and the HWM configuration registers
are added.
Change-Id: Ia6e2a7c13a5086d19ebdb426f2f975b43220a273
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/18562
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Without this change, error "Unknown descriptor version: 4" will be
returned if this frequency is selected (seen on GLKRVP)
Change-Id: Ib5bfb996b85c7245d8f9c70988bfd5bbac882d74
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/18688
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The __attribute__((weak)) lines on structs were being read as functions,
causing a warning that the brace should be on the next line.
Add a check to see if it's a struct with an attribute, and ignore it for
the OPEN_BRACE check if it is.
Change-Id: Ieb0c96027e8df842f60ca7c9de7aac941eed1dc2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18570
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
checkpatch: add option for excluding directories
when importing code from external sources
Using --exclude <dir> we should be able to exclude a list of well
defined locations in the tree that carry sources from other projects
with other styles.
This comes from the 01org/zephyr project in github:
Original-Change-Id: I7d321e85eed6bc37d5c6879ae88e21d20028a433
Original-Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: Icc9e841e7d84026d6ab857ff90b0f093515ccaad
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18568
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
This adds support for the Wildcat Point LP for intelmetool.
When the tool detected a Wildcat Point LP,
then the ME will be reported as difficult-to-remove.
Change-Id: I35423db11cdc1e21e7f02ce90dace7fb4d236c45
Signed-off-by: Huan Truong <htruong@tnhh.net>
Reviewed-on: https://review.coreboot.org/18575
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
The intel ME checker tool would segfault if it reaches the end of
the loop without having the dev pointer set. This happens when
it gets to the end of the previous loop without knowing what to do
with any of the devices it sees.
This patch makes sure the pointer is not NULL before accessing it.
Change-Id: Ia13191799d7e00185947f9df5188cb2666c43e2a
Signed-off-by: Huan Truong <htruong@tnhh.net>
Reviewed-on: https://review.coreboot.org/18573
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This was removed from the previous version, but we'd like it in
a separate patch, so it's obvious and can easily be applied to the
next version.
Change-Id: I9396009e82e762aa0cc037dbe9e7133962af6354
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18577
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This is version 03aed21 from linux/scripts, updated on Dec 12, 2016.
The version needs to be updated because Perl version 5.20 deprecated the
/C regex expression. Perl version 5.24 removed it completely, so the
old version fails to run on the coreboot builders.
Change-Id: Ib97997237ca64c65d7f91d568ae4bec000804331
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18571
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
All files:
- Previously, various things were hardcoded into the docker containers
that made it necessary to update the Dockerfile files for each new
version of the sdk. Turn those into 'Variables" that are updated during
the build step. Because the makefile is piping the dockerfile through
the sed command and back into the docker build command, the normal
docker "COPY" keyword doesn't work.
coreboot-jenkins-node changes:
- Run ssh-keygen -A to explicitly generate the ssh keys. This fixes an
error: Could not load host key: /etc/ssh/ssh_host_dsa_key
coreboot-sdk changes:
- Remove apt-get upgrade command - The Dockerfile guide recommends
not to run this.
- Change libssl-dev to libssl1.0-dev. libssl-dev's header files won't
build the Chrome-EC codebase.
- Add libisl-dev, needed to build the riscv toolchain.
- Build the toolchain using the -b option
- Add environment variables containing the version and commit that the
coreboot-sdk was built from.
Makefile:
- Update targets to use the version and commit variables
Change-Id: I2c1376fe4b791da2a62fca11bc92c4774cbef1c8
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/18001
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
- GCC gets updated from 5.2.0 to 6.3.0:
gcc-6.3.0_riscv.patch is a diff between 5fcb8c4 and 173684b in
riscv-gcc, and it needs gcc-6.3.0_memmodel.patch.
- Binutils goes from 2.26.1 to 2.28:
There is a build error for MIPS gold so I add patch for it.
- GMP gets a bump from 6.1.0 to 6.1.2
- MPFR is updated from 3.1.4 to 3.1.5
- GDB is upgraded from 6.1.1 to 6.1.2
- IASL is changed from 20160831 to 20161222
- LLVM is changed from 3.8.0 to 3.9.1
Change-Id: I20fea838d798c430d8c4d2cc6b07614d967c60c5
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17189
Tested-by: build bot (Jenkins)
Relevant changes (commit 250b2ec):
* Fix a bug for ME6 Ignition images.
* Fix signature checking for ME11 and later.
* Add command line arguments.
* Add an option to relocate the FTPR partition to the top of the
ME region, recovering most of the ME region space.
* Print the image minimum size.
* Add write boundary checks, to prevent writes on other regions
in case of bugs.
The new changes have been tested on multiple platforms by the
me_cleaner users. They have been tested also on the author's
X220T with coreboot, where the ME region has been shrinked up to
84 kB without any issue.
Change-Id: I3bd6b4cba9f5eebc3cd4892dd9f188744a06c42b
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/18473
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
It explains the prerequisites to run the script, some
background on how to setup the computer running the script,
and the board it gathers the information from.
That information is too long to fit inside the script's
help.
Change-Id: Iecba7310ff1583149c02728e955716775bcbbdc4
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/6660
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This company doesn't do custom hardware anymore and doesn't
host the sources anymore. We therefore point to the archived
sources instead.
Change-Id: I5ce4f6a468b852fc1d0947fe2b28a5297f14c437
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/11889
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Tested-by: build bot (Jenkins)
Update sconfig lex and yacc files to add support for a new "SPI" device
type in the devicetree. SPI device takes only parameter i.e. chip select
number for the device on the SPI bus.
Re-generate the shipped files for sconfig using flex 2.6.0 and bison
3.0.4 (make CONFIG_SCONFIG_GENPARSER=1). Clean up local paths that leak
into generated files.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully.
Change-Id: If0831e25b3e4ed87827ad92356d7bf47b6387884
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18339
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Given a specification of bitfields defined e.g. as follows:
specfile:
{
"field1" : 8,
"field2" : 4,
"field3" : 4
}
and a set of values for setting defaults:
setterfile:
{
"field1" = 0xff,
"field2" = 0xf,
"field3" = 0xf
}
You can generate a binary packed blob as follows:
./blobtool specfile setterfile binaryoutput
binaryoutput: ff ff
The reverse is also possible, i.e. you can regenerate the setter:
./blobtool -d specfile binaryoutput setterorig
setterorig:
# AUTOGENERATED SETTER BY BLOBTOOL
{
"field1" = 0xff,
"field2" = 0xf,
"field3" = 0xf
}
This tool comes with spec/set files for X200 flash descriptor
and ICH9M GbE region, and can be extended or used to decompile
other data blobs with known specs.
Change-Id: I744d6b421003feb4fc460133603af7e6bd80b1d6
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/17445
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Martin Roth <martinroth@google.com>
With coreboot 4.4 switched to "Descriptor mode" for Lenovo T500
it automatically unlocks all flash regions. For Gbe region
the "Requester ID" was hardcoded resulting in *dead* Gbe.
Keep board specific "Requester ID" while unlocking Gbe region.
Allows Lenovo T500 to boot with IFD "Descriptor mode" with unlocked
flash regions.
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Change-Id: Ia4b5d1928e84bee42182fc83020e3a13fadc93c4
Reviewed-on: https://review.coreboot.org/18055
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Adds checks for OpenBSD in all the places that were already checking for
NetBSD. This fixes e.g.:
ec.c:21:20: error: sys/io.h: No such file or directory
which was caused by defaulting to Linux.
Also, OpenBSD calls its amd64 iopl amd64_iopl instead of x86_64_iopl.
This change just defines iopl appropriately depending on the
OS and architecture.
TEST=Build on OpenBSD 6.0 or -current from 2017-01-25.
Change-Id: If6d92a9850c15cd9f8e287cc4f963d3ff881f72c
Signed-off-by: Steven Dee <i@wholezero.org>
Reviewed-on: https://review.coreboot.org/18260
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Speed up the execution of this script from ~6 seconds to ~1 on my
system.
There are some changes to its output, but they're actually _more_
correct: so far, architectures without compiler support kept compiler
options for architectures that ran successfully earlier.
Change-Id: I0532ea2178fbedb114a75cfd5ba39301e534e742
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/18262
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This fixes the build for the generated code for boards with PS/2
keyboard, since commit 448e386309 updated the pc_keyboard_init()
function.
Change-Id: I776b49b847985296eaca4af6d6e49ab5d6abbafe
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/18242
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Intel Core 2 is not further specified since not all chipsets support
quad cores, which could confuse users.
Change-Id: I86c0a41743fe784f432347fa639d3c26604e058e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18235
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
- Use dashes instead of underscores for consistency and to match other
coreboot targets
- Fix a couple of places where old target names were referenced
- Remove double 'help' target from .PHONEY target list
Change-Id: I3b464ebf74653a8cc880e982316fd883757ec728
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/18000
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Kill running docker containers before trying to remove images or
containers.
Change-Id: Id2de90edbe5d0dc6ecb906be7101ad9744dbd11e
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/17999
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Fix TODO: restrict $1 to allowed values.
- Specifically exclude 'oem' board status directories.
- Exclude any directory that doesn't follow the date format to keep
the script from breaking again in the future if something it doesn't
recognize is pushed. Just ignore it for the wiki.
- Fix shellcheck warnings.
Change-Id: I2864f09f5f1b1f5ec626d06e4849830400ef5814
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18225
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
me_cleaner is a tool to strip down Intel ME/TXE images by removing all
the non-fundamental code, while keeping the ME/TXE image valid and
suitable for booting the system. The remaining code (ROMP and BUP
modules) is the one responsible for the very basic initialization of
the ME/TXE subsystem and can't be removed.
This tool exploits the fact that:
* Each ME/TXE partition is signed individually and it is possible to
remove both the partition and the signature.
* The ME/TXE modules are not signed directly, instead they are hashed
and the list of their hashes is hashed again and signed: this
means that modifying a module doesn't invalidate the signature,
but only the hash of that single module.
* The modules hashes are checked only when the corresponding module
needs to be executed.
* The system can boot after the execution of the first module (BUP,
inside the FTPR partition), even if the subsequent stages fail.
Currently me_cleaner works on every Intel platform with Intel ME or
Intel TXE with the following limitations:
* Doesn't work when Intel Boot Guard is set in Verified Boot mode.
* Doesn't fully work on Nehalem yet.
* On Skylake and later generations, since the partitions' internal
structure has changed, me_cleaner leaves intact the FTPR
partition, removing all the the other partitions.
This tool has been tested on multiple platforms and architectures by
different users, and seems to be stable. The reports are available
here:
https://github.com/corna/me_cleaner/issues/3
A more in-depth description of me_cleaner is available here:
https://github.com/corna/me_cleaner/wiki/How-does-it-work%3F
Change-Id: I9013799e9adea0dea0775b9afe718de5fc4ca748
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/18203
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If compression failed, just store the uncompressed data, which is what
cbfstool does as well.
Change-Id: I67f51982b332d6ec1bea7c9ba179024fc5344743
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18201
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
When the ME is hidden (most likely because it was disabled), it cannot
be found until activate_me() is called.
Change-Id: Ie1f65f61eb131577d7254af582e2709660f4da27
Signed-off-by: Dan Elkouby <streetwalrus@codewalr.us>
Reviewed-on: https://review.coreboot.org/18149
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
It's a BSD function, also, we missed to include `endian.h`.
Just including `endian.h` doesn't fix the problem for everyone.
Instead of digging deeper, just use our own endian-conversion from
`commonlib`.
Change-Id: Ia781b2258cafb0bcbe8408752a133cd28a888786
Reported-by: Werner Zeh <werner.zeh@siemens.com>
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/18157
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
The script now automatically discovers the original branch (if known)
and configures itself appropriately.
Additionally, commit messages for changes coming _from_ upstream will
be prefixed with "UPSTREAM: ".
With the optional --cros argument, it also adds a BUG/BRANCH/TEST block
at the right place in the commit message (right above the metadata) if
one doesn't already exist.
Change-Id: I81864ddca62fd99a9eb905d7075e5b53f58c4eb5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18135
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
cbfstool ... add ... -c precompression assumes the input file to be
created by cbfs-compression-tool's compress command and uses that to add
the file with correct metadata.
When adding the locale_*.bin files to Chrome OS images, this provides a
nice speedup (since we can parallelize the precompression and avoid
compressing everything twice) while creating a bit-identical file.
Change-Id: Iadd106672c505909528b55e2cd43c914b95b6c6d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18102
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
cbfs-compression-tool provides a way to benchmark the compression
algorithms as used by cbfstool (and coreboot) and allows to
pre-compress data for later consumption by cbfstool (once it supports
the format).
For an impression, the benchmark's results on my machine:
measuring 'none'
compressing 10485760 bytes to 10485760 took 0 seconds
measuring 'LZMA'
compressing 10485760 bytes to 1736 took 2 seconds
measuring 'LZ4'
compressing 10485760 bytes to 41880 took 0 seconds
And a possible use for external compression, parallel and non-parallel
(60MB in 53 files compressed to 650KB on a machine with 40 threads):
$ time (ls -1 *.* |xargs -n 1 -P $(nproc) -I '{}' cbfs-compression-tool compress '{}' out/'{}' LZMA)
real 0m0.786s
user 0m11.440s
sys 0m0.044s
$ time (ls -1 *.* |xargs -n 1 -P 1 -I '{}' cbfs-compression-tool compress '{}' out/'{}' LZMA)
real 0m10.444s
user 0m10.280s
sys 0m0.064s
Change-Id: I40be087e85d09a895b1ed277270350ab65a4d6d4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18099
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This speeds up the lzma encoder approximately four-fold.
Change-Id: Ibf896098799693ddd0f8a6c74bda2e518ecea869
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18098
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
There are systems that come with curl but not wget (eg macOS) and they
now have to install one less additional dependency.
Also fix some cosmetic issues in console output and require valid
certificates on https downloads.
Change-Id: Idc2ce892fbb6629aebfe1ae2a95dcef4d5d93aca
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18048
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
When running abuild outside of jenkins, because all of the builds are
printed intermixed, it's easy to miss when a board has failed the build
by looking at the output. This saves a list of failed builds and prints
the list at the end of the run.
- Add a command line option to mark when abuild is being called
recursively.
- Add all failed builds to a list.
- Print the list when a non-recursive abuild run exits.
Change-Id: Icb40ed8083a57bbcde49297d2b0814f98dcbb6c8
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17890
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Variable name of inteltoolArgs was fixed.
The way of passing arguments to inteltool was changed from "-a -f"
to "-af" which is better as the string seems to be parsed
as a single argument.
Change-Id: I0c48fb1e912261748ba9e2b91c291bac28b9e856
Signed-off-by: Sebastian 'Swift Geek' Grzywna <swiftgeek@gmail.com>
Reviewed-on: https://review.coreboot.org/18050
Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at>
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Gerrit will let you push a patch without a signed-off-by line,
although I believe it can't actually be merged. Instead of catching
it either manually, or when the patch is attempting to be merged,
catch this in the jenkins builder.
Change-Id: I80161befa157266dd4e3209839a06ff398aab6bb
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17941
Tested-by: build bot (Jenkins)
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
That's undefined behavior in C
Change-Id: I671ed8abf02e57a7cc993d1a85354e905f51717d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1229557
Reviewed-on: https://review.coreboot.org/18014
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This allows the make jenkins-build-toolchain to use the
BUILDGCC_OPTIONS variable. Previously, the options were hardcoded.
Change-Id: I5f4c1d3fc8c714ec3640356ae3c86ae157f486d2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17766
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
If we use ccache we have to interpret spaces in $CC as separation
characters. The downside is that we can't support spaces in the
compiler's path. But, well...
Change-Id: I4e6e6324389354669a755f570083a40ff00b1bbf
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/18018
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
argv is only filled for macro->argc > 0.
Change-Id: I5ff21098384afc823efa14be3d5565507fb2b3b2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1287089
Reviewed-on: https://review.coreboot.org/18016
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
closure_type is copied then never used again. Close that leak.
Change-Id: Idd4201f7fc6495fde5ad2e1feb7e499e38986e92
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1287073
Reviewed-on: https://review.coreboot.org/18015
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Without this change inteltool cannot read BIOS_CNTL values nor can it
read the SPIBAR values.
Change-Id: I9ff16e060aca66e3cb11c8315a6843ccecd1d3c2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17979
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The ICH7 SPIBAR offset and registers are different from later
generation.
ICH8 has a different offset from later generation.
ICH6 has no SPI controller.
Change-Id: I7691bce619089b15805114047bcb1fd121a5722b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17978
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
It's usually not too interesting, so hide it behind -v.
Change-Id: Icffb5ea4d70300ab06dfa0c9134d265433260368
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/17899
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
On a 32-bit system, pointers are 32-bit wide, and not 64-bit, resulting
in the warning below.
```
mmap.c: In function ‘map_physical_exact’:
mmap.c:26:20: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
virt_addr = mmap((void*)mapto, len, PROT_WRITE | PROT_READ,
^
```
Fix this by using compatible types.
Change-Id: I4ede26127efcbd5668b978e6880a0535607e373d
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/17970
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin Roth <martinroth@google.com>
CXXFLAGS seems to be used a lot and have to be specified independently
from CFLAGS.
Change-Id: Iff4c76e54a46e908299b532fd848165a3dc04d43
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17937
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
GCC 6 can optionally default to building all binaries as position
independent executables (PIE). This breaks linking against static
libraries that are compiled without position independent code (PIC).
Building GMP `--with-pic` in this case seems to be the least fragile
solution.
TEST=Run `make all` and `make BUILDGCC_OPTIONS=-b build-i386` in
util/crossgcc on Debian Stretch.
Change-Id: I5f3185af9c8d599379a628e18724b217b88be974
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17936
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
The earlier loop exits gracefully iff i == index. In other cases, member
might be NULL, so check that the scan was successful before using its
results.
Change-Id: I818c233d797d82fa819243c4626dd9c4b7de3ac6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1129147
Reviewed-on: https://review.coreboot.org/17887
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
It's later tested for NULL, but never initialized to make that test work
reliably.
Change-Id: Iadee1af224507a6dd39956306f3eafa687895176
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1323515
Reviewed-on: https://review.coreboot.org/17880
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
filebuffer is treated like a string, so it should be zero-terminated
like a string.
Change-Id: I078aa39906394be64023424731fe0c7ae2019899
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1323473
Reviewed-on: https://review.coreboot.org/17878
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
To make the generated descriptor compatible with latest libflashrom.
Change-Id: I005159dd24e72da9cc43119103c96c5dd5b90a55
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17447
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
We might not care much about this buffer, but we really use it later
on...
Change-Id: Ia16270f836d05d8b454e77de7b5babeb6bb05d6d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1294797
Reviewed-on: https://review.coreboot.org/17860
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
- Because $configoptions contains embedded newlines that we want to be
interpreted when we pipe it out to the config file, change that back to
a printf, and tell shellcheck that we want to do it.
- 'make olddefconfig' & 'yes "" | make oldconfig' give us the same
output for the config file, but olddefconfig doesn't generate the log
the way oldconfig does. Go back to the previous behavior.
- Don't overwrite the config log with make savedefconfig.
Change-Id: I4966a3bb2541b452eeb4ca73ac3cd727f8525636
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17853
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
So far, cbfstool write, when used with the -u/-d options (to "fill
upwards/downwards") left the parts of the region alone for which there
was no new data to write.
When adding -i [0..255], these parts are overwritten with the given
value.
BUG=chromium:595715
BRANCH=none
TEST=cbfstool write -u -i 0 ... does the right thing (fill the unused
space with zeroes)
Change-Id: I1b1c0eeed2862bc9fe5f66caae93b08fe21f465c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: baf378c5f2afdae9946600ef6ff07408a3668fe0
Original-Change-Id: I3752f731f8e6592b1a390ab565aa56e6b7de6765
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/417319
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: https://review.coreboot.org/17787
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
We never specified what value add-int should write by default.
Change-Id: I240be4842fc374690c4a718fc4d8f0a03d63003c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/17796
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Show an error if a symbol does not have a defined type.
This caused a problem of an undefined symbol in check_defaults, so
we just skip those symbols there as we can't verify the default pattern
without knowing the type.
Change-Id: I28711a77962e16f6fc89789400363edd0fdd0931
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17345
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Since we've removed them from the tree, add a check to keep them out.
Change-Id: I2995da765fee8796a297963d54a1c34f56376efe
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17658
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Overriding symbols within a .config is pretty common when doing
automated builds with various different options. The warning
text makes it sound like this is an issue, so change it to say
'notice' instead. We could get rid of it completely, but it's
not a bad thing to know that we have two copies of the same symbol
in the .config.
BUG=chrome-os-partner:54059
TEST=copy a disabled kconfig option to the end and set it to y.
See notice text instead of warning.
Change-Id: I9f575b2275233f638e42676263348c807e6515bd
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16691
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
- Show an error if a directory is added after the command line options
to catch scripts using the old parameters.
- If an invalid parameter is specified, show the parameter.
Change-Id: Ie8948361f1c51e89a99bdb13df8c554747cd521d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17741
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
cbroot was previously specified by just adding it to the end of the
command line with no explicit identifier. This change allows it to
go anywhere in the command line and adds the -R or --root identifier.
This makes the command line more consistent. Most of the time, this
argument isn't even needed, as the automatic detection finds cbroot.
Change-Id: I1d6fd8f51765d0d8b29be8af1e8105e06dd44cc8
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17740
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Indent with spaces for consistency
- Change lbroot to cbroot
- Remove incomplete list of options from usage line
- Capitalize first word of all option text
- Alphabetize options other than version and help
- Move version and help options to the end
Change-Id: Id5bd4db8d7e3705cbbb93895a46a3608cd1b09e2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17724
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This cleans up the shellcheck warnings in abuild.
Warning count:
1 Unexpected ==.
1 Use "${var:?}" to ensure this never expands to / .
1 VARIABLE appears unused. Verify it or export it.
1 Use "$@" (with quotes) to prevent whitespace problems.
2 Consider using { cmd1; cmd2; } >> file instead of individual redirects.
2 Expressions don't expand in single quotes, use double quotes for that.
3 Prefer [ p ] || [ q ] as [ p -o q ] is not well defined.
4 $/${} is unnecessary on arithmetic variables.
5 Check exit code directly with 'if mycmd;', not indirectly with $?.
5 Use cd ... || exit in case cd fails.
11 Declare and assign separately to avoid masking return values.
13 Use $(..) instead of legacy `..`.
20 Don't use variables in the printf format string.
104 Double quote to prevent globbing.
Change-Id: I9c77e122435ba87ce3a4aee76b5022f7265f9ef2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17722
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Update abuild to allow for building saved miniconfig files.
If one or more config files exist for a platform under
coreboot/configs, they will be built instead of the automatically
generated default config.
The config filename needs to start with "config.$VENDOR_$BOARD" to be
picked up by the abuild script.
- Update to version 0.10.0
- Add -d parameter to specify the saved config file directory
- Break 2nd half of create_config function into update_config
to set the payload for saved config files.
- Unset new payload Kconfig options that could be set in a saved
config file.
- Update a bunch of MAINBOARD variable names to BUILD_NAME since
the build name isn't necessarily the same as the mainboard name.
- Split build_target into two functions - build_target and
build_config because one mainboard can now build multiple
configurations.
- Update remove target and call it directly from build_target()
instead of from build_targets()
Change-Id: I1a276d3e507b178f7dcd9dc125fa9c59f1ab47bd
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17590
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
For some reason the \n in the defconfig save error was not escaped.
Change-Id: I6a76b258f461a194fe17aae2b4fa04326b46d8d6
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17742
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
It turned out that newer GNAT versions can build our current (5.3.0)
GNAT without bootstrapping. So adapt the version enforcement.
Change-Id: Ie7189e8bcadeee56cf5c2172e8c0ae7cd534685a
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/17706
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
With some newer versions of GCC (experienced with GCC 6.2.1 on Arch-
Linux) the first stage of a boostrapping fails due to a mismatching
function prototype. Also add a missing `static` to the signature.
Change-Id: Ia927036ccd725550f1191890515578bc80c74f80
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/17704
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Because of the varied environments that coreboot is built under, we
don't want to have symbolic links in the tree.
Change-Id: I4cf9d95a437626cb52e3032a5e6cba83320a334b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17633
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
As devicetree files can have different name followed by extension cb
Exclude all .cb file from the license header check.
Change-Id: I37b651eedd77cbf3d3e65ff0f027f971b0a2d2ac
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17186
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
- Show number of threads being used to build.
- Show the version number of each package when skipping it.
- Show whether the tool is a host or target build.
Change-Id: I1134c08b417a731859e6b25fe38aecf01a85927b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17418
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
- All of the symbols are in the .config, so if .config is include in
the search all of the symbols are always found.
- There are now some Kconfig symbols in the Documentation directory,
so that needs to be excluded.
- 3rdparty has lots of Kconfig symbols that are unrelated to what
is being searched for.
Change-Id: I0ff56d0a0916338a8b94f5210b8e0b3be5194f41
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17588
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Don't search for symbols in the payloads directory, except for specific
files that are actively added back to the search.
Change-Id: I6f28dc7dee040b8061fa5644066f3613367b6d84
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17443
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Otherwise errors similar to "touch: cannot touch
'${TARGETDIR}/.GMP.6.1.0.success': No such file
or directory" might occur.
Change-Id: I4f24c93a25b7d567d3ce14a0415d20fd0778c9c8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/17603
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Use a unique bus/device/function if a bay trail LPC bridge was found.
TEST=Run on MinnowBoard MAX Turbot and customer's LynxPoint-LP.
Change-Id: Ib4b50aaf9817ac94f46c28925081540676226d84
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/17464
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Previously, the .success file for each target didn't save the version,
of the package that was built. This created problems when someone
wanted to update to a new version and could not rebuild.
Change-Id: I9975b198ac4a7de8ff9323502e1cbd0379a1dbb8
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17417
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
- Return an error if the specified file could not be opened. To do this
cleanly, the return value was added.
- Since there's now a unified return value, use it where it makes sense.
- Don't return an error from --help. If you've asked for usage, it's
not an error.
Change-Id: I7c712d1e1927c2d4957b044b87ad26475b7a0e3b
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/17324
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Various fixes for clang warnings:
warning: arithmetic on a pointer to void is a GNU extension
- change *rom from void* to char* and cast back to void* as needed
warning: implicit conversion changes signedness
- In ALIGN macro, pass in value as unsigned
warning: no previous prototype for function
- Change functions to static
warning: no previous extern declaration for non-static variable
- Change global variables to static
warning: comparison of integers of different signs
- Make loop variable 'i' unsigned
warning: variable 'output' may be uninitialized
- Make sure an output filename was specified
warning: implicit conversion loses integer precision
- cast fd_stat.st_size to the appropriate type
Change-Id: I0134a79c00938e121e63b52fd63bd502f4cb9e99
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/17322
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Previously, the ROM size was passed into amdfwtool solely as a #define,
meaning that all boards built with the tool would assume the same size
ROM. This became a problem when the default rom for abuild was updated
to be a board with a 256KB ROM.
The temporary solution was to build amdfwtool individually for each
board that needed it. This replaces that workaround by allowing the
ROM size to be passed in as a command line parameter.
- Add the -f | --flashsize option to accept a hex value for the ROM
size.
- Add checks to make sure the ROM size supplied is large enough.
- Because the ROM size is not hardcoded, it needs to be passed to
various functions.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I0ca69cbba54797e0387a6e85935767b4136ef615
Reviewed-on: https://review.coreboot.org/17321
Tested-by: build bot (Jenkins)
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Apollo Lake uses yet another descriptor format where only two masters
are used: CPU/BIOS and CSE/TXE. CSE stores data in a region number 5
that has not been used previously and CPU must not write it. Add quirk
(-p aplk) that locks descriptor according to recommended values.
BUG=chrome-os-partner:58974
TEST=ifdtool -p aplk -l bios.bin; ifdtool -d bios.bin.new. Make sure
FLMSTR1 and FLMSTR2 are set correctly. unlock with -l and make sure
FLMSTRs are restored.
Change-Id: I3f33372bef3ff75d0e34030694c79cd07d5540de
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/17202
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Double the space for psp2dir to 0x200.
Based on advice from AMD, increase the region containing
the signature to 4K.
Original-Signed-off-by: Marc Jones <marcj303@gmail.com>
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit e03a9402711c3a210816d0aa32865491a0523639)
Change-Id: If60132f913928bab0c2fe4aacedf342080929599
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17148
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Zheng Bao <fishbaozi@gmail.com>
Original-Signed-off-by: Marc Jones <marcj303@gmail.com>
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit 482b65c219b932fd374f2ac469a023db219a66de)
Change-Id: I0a24a0aa4c7d9f4a8cc3ee9b7da60ea7704e6f17
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17147
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Zheng Bao <fishbaozi@gmail.com>
Make the PSP2 smufirmware2 name unique so the command-line option
gets picked up.
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Reviewed-by: <marcj303@gmail.com>
(cherry picked from commit 98cf3880797f72aeb7169c3f8718a10092af9624)
Change-Id: I5430cf8b81fb03c95e6ee9d7e53455e6224256ff
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17146
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Dumping and behavioral analysis have shown that there are more registers
in the environment control of the IT8783E/F than documented in my data-
sheet. This adds every register that wasn't 0x00/0xff by default. The
default values are guesswork: those that looked like sensor readings
became NANA, others are taken from dumps.
Change-Id: I7e39700c9b98ed5be9f085bc8ffd848006310254
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17005
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Values are taken from an unpublished datasheet. With the exception of
the default value for register 0x55 in the environment controller space:
Looks like this was just documented wrong. The dumped value of 0x50 also
makes more sense.
Change-Id: I2bd23d30b7158b2e05fcee7c6280df82570d1401
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17004
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add new dump format to superiotool that prints each register on a
separate line. This should be more suitable for diff'ing dumps of
multiple superiotool runs.
Change-Id: I226ee82b903bf77e760d3396d02fa50688adb9f2
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17003
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The checkpatch script takes a really long time to run, and when the
output is buffered to wait until it's finished, it's hard to tell if
the script is actually doing anything.
Instead, use tee to log the output and display it at the same time.
Change-Id: I3cf36e5e6ca28584103888ee1c6f125320ac068a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17125
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Change-Id: Ia40543e5585845e5e6c178a620052c6a25927a5c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/17102
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
It has nothing to do with git configuration, but is one of our
convenience scripts. It also has nothing to do with rebases (except that
it can be comfortably used through git rebase --exec)
Change-Id: Icc60c4de486a0027fe2230e93b441e62ba022193
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/17101
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The relevant data is gone in Chrome OS depthcharge's master branch, and
so the script outlived its usefulness.
Change-Id: I04f3f168e23d4bc7c31692263a8eec3f97ee50de
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/17100
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Change-Id: Ic5a3be1128f2f9a53d21e0a2c577192962260df6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/17018
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add a --force/-F option and enable it for cbfstool write, where it has
the effect of not testing if the fmap region contains a CBFS or if the
data to write is a CBFS image.
Change-Id: I02f72841a20db3d86d1b67ccf371bd40bb9a4d51
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16998
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Change-Id: I81ced8c6e02b00a3835e3b42c9cf2669b1b2bd3e
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
[jn: Added XGCC_BIN variable to avoid requiring the tools in $PATH]
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/16955
Tested-by: build bot (Jenkins)
gerrit-rebase is a gerrit-context aware rebase script. Given a source
and a target branch (that need to have a common ancestor), it prepares
a rebase todo list that applies all commits from source that aren't
already found on target.
It matches commits using Reviewed-on lines in the commit message that
are added by gerrit when submitting commits using the "cherry-pick"
strategy.
This has been shown to be the best preserved meta data to work from in
existing data (Change-Id was mangled in all kinds of ways).
Change-Id: I9618c1b66ebc1fb7ed006efbc1665fb08386e1a5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16695
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
flashrom treats them as invalid because start > end.
Change-Id: I1c8b4563094823ebd9b1193b91e7b4a748955228
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/16936
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
max_regions is set to the maximal regions based on the ifd version
Change-Id: I9fa5a4565f4dbd67b5c6df97756311560e2a18bc
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/16934
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
We do this so that the riscv objdump can be used on the coreboot.elf file.
Change-Id: Ib8bf85a3299dd75b779e7fa3757f5b62c9c7170b
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/16918
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Between GNU Tar 1.28 & 1.29, the files excluded by --exclude-vcs was
updated. This breaks the reproducibility. Instead, just manually
exclude the files to match what was excluded in v 1.28 and earlier.
Change-Id: Ie0717891506f4a6d750ff264f9cc2494a296265b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16900
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Add more help text.
- Remove braces from variables where the variable is isolated.
- Remove --recurse-submodules from clone. This breaks on old coreboot
versions.
- Add some whitespace between blocks.
- Fix all shellcheck warnings.
- Verify tar version and fail if it doesn't support --sort.
Change-Id: I4a49df99532d9a92a4a05bceff16f96a4fc3e205
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16883
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Internal changes:
- Fix shellcheck issues.
- Add some help text and update section header text.
- Reorder sections to try to get better estimates of what the commits
were mainly touching.
- Start making the script slightly less coreboot-centric.
- Don't print git errors.
Changes in output:
- Find new and deleted CPUs, SOCs, northbridges, southbridges, and SIOs.
- Show new users.
- Show before and after commit count for all authors.
Change-Id: I9858436f9458b2859a91273a525901df34796df4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16848
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Add an exception for MAINBOARD_POWER_ON_AFTER_POWER_FAIL when checking
- With those exceptions set, we don't have anymore #define or #ifdef
warnings, so turn them to errors so no more can be pushed.
- Change the definition of an unused symbol from a warning to a note.
There are times when unused symbols are expected.
- Upgrade the warning for loading Kconfig files multiple times from
a warning to an error.
Change-Id: I6dcb06d4f0b099d5ccaf7643e72dd790719bdf58
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16840
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The type of the default value wasn't being checked to make sure that it
matched the type of the Kconfig symbol.
This makes sure that the symbol is being set to either a reasonable
looking value or to another Kconfig symbol.
Change-Id: Ia01bd2d8b387f319d29f0a005d55cb8e20cd3853
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16839
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We were not setting the init_size for linux payloads.
A proper value of init_size is required if the kernel
is x86_64.
This is tested in qemu and fixes the observed problem
that 974f221c84b05b1dc2f5ea50dc16d2a9d1e95eda and later would not
boot, and would in fact fail in head_64.S.
Change-Id: I254c13d16b1e014a6f1d4fd7c39b1cfe005cd9b0
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://review.coreboot.org/16781
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
The dockerfile allows building an image with the current tree's
crossgcc code.
Change-Id: I59cd85b0acdf8776e3e090742d7f5d89d1c154e7
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: https://review.coreboot.org/16636
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
GCC build instruction recommend to bootstrap a native compiler first.
Not sure, when that is really necessary. A major version change seems
reasonable.
Change-Id: I80a9ec25739b7d33a1d1c7b4b2140d19d89a99ae
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16675
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Just add some helpers that show parts (major, major.minor) of the GCC
version to be built (buildcc_*) and of the host compiler (hostcc_*).
They will be used in follow-up commits.
Change-Id: I37c12ad1a2d08645f40a9f0f0a479c8d7cc3e127
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16674
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Also remove a dead line that checks for unknown options: We already let
`getopt` check that.
Change-Id: I0e829b266e192757d6e455ee4cc608315bb4b7be
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16681
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
We accidentally checked the status of `eval` instead.
Change-Id: I1ba258944184ed707ed1f176e528d8266656cb59
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16680
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Looks like this never worked correctly: There are three argument formats
to GNU getopt and none of them matches what we fed it. The missing
double dash before the `set` arguments proves that we always called it
with parameters that `getopt` did NOT parse.
Change-Id: Ib8343976ef31774b18567a9fc9745a9f58dd287a
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16679
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Nico Huber