Commit Graph

6 Commits

Author SHA1 Message Date
Uwe Hermann e8c6f86b80 Add (commented) line for VGA blob adding (CBFS version) to simplify things for users a bit.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4352 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-08 13:05:47 +00:00
Patrick Georgi 240ef7c769 Change the CBFS build process to use coreboot.rom
instead of coreboot.strip. That fixes the normal
image because the calculations for its offset in
the ROM match reality again.

This requires changes in CBFS configurations to
minimize the bootblock size. These are also done
for CBFS boards.

Other than this a couple of minor fixes are in this
patch:
- make asus/m2v-mx_se build with abuild with a
  crosscompiler
- move CONFIG_CBFS for hp/dl145_g3 to Options.lb
  as it's done everywhere else
- change the default config of abuild to not
  provide ROM_IMAGE_SIZE values for the images
  in a CBFS configuration
- change abuild's crosscompile autodetection to
  not try to use "i386-elf-i386-elf-gcc" (which
  is bogus)

Except for the latter two abuild changes (both
in util/abuild/abuild), they're available as
patch set on the mailing list in a mail from
2009-06-05 titled
[PATCH]es to get normal image to work again with CBFS

The changes in util/abuild/abuild are trivial and
abuild tested.

As discussed on the list,
targets/hp/dl145_g3/Config-abuild.lb is
deleted, now that Config.lb works again.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4344 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-06 07:19:53 +00:00
Uwe Hermann dcda7fd527 Fix manual build on the Kontron board (trivial).
A manual build was yielding section overlaps, so increase
ROM_IMAGE_SIZE to the same size the Config-abuild.lb is using.

Build-tested by me using a manual build.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4266 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-11 01:44:54 +00:00
Uwe Hermann b1fc0ba3fc Add some comments to make it easier to enable onboard VGA for
different ROM chip sizes (trivial, tested with 256 KB chip).

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3825 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-12-19 14:21:42 +00:00
Uwe Hermann 385e90ad1c Rename LinuxBIOS strings and filenames to coreboot.
Also, use the more generic and buildrom-friendly '../payload.elf' as
the default payload location.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3753 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-11-14 19:25:37 +00:00
Stefan Reinauer 36a2268d17 Support for the Kontron 986LCD-M mainboard series.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3704 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-10-29 04:52:57 +00:00