This service is required by various coreboot code modules. It looks
like the 8064 SOC does not provide anything better than a 32 KHz free
running counter (it is used in u-boot for us timer as well). Let's use
this for now.
BUG=chrome-os-partner:27784
TEST=manual
. with the rest of the patches applied AP148 boots all the way to
trying to start the payload.
Original-Change-Id: I98b91ce179f7388d59c769a59caf49ca7640e047
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/197896
(cherry picked from commit d526830f9d9618e4ca3460165d7b9ecc8ab268cf)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id37ed21193db67ceee11a795713c34ef26383380
Reviewed-on: http://review.coreboot.org/7993
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
ARM processors save the PC value in the Link Register when they handle
and exception, but they store it with an added offset (depending on the
exception type). In order to make crashes easier to read and correctly
support more complicated handlers in libpayload, this patch adjusts the
saved PC value on exception entry to correct for that offset.
(Note: The value that we now store is what ARM calls the "preferred
return address". For most exceptions this is the faulting instruction,
but for software interrupts (SWI) it is the instruction after that. This
is the way most programs like GDB expect the stored PC address to work,
so let's leave it at that.)
Numbers taken from the Architecture Reference Manual at the end of
section B1.8.3.
BRANCH=none
BUG=chrome-os-partner:18390
TEST=Provoked a data abort and an undefined instruction in both coreboot
and depthcharge, confirmed that the PC address was spot on.
Original-Change-Id: Ia958a7edfcd4aa5e04c20148140a6148586935ba
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199844
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
(cherry picked from commit 4a914d36bb181d090f75b1414158846d40dc9bac)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ib63ca973d5f037a879b4d4d258a4983160b67dd6
Reviewed-on: http://review.coreboot.org/7992
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
This adds a generic helper function for adding boot reason in the
ChromeOS case. If vboot is enabled, it will use information passed
in via the vboot handoff table in cbmem to determine mode and
reason in the case of recovery.
BUG=chromium:373467
BRANCH=nyan
TEST=built along with follow-up CL and booted on Big under various
modes, verified entry was added to eventlog with "mosys eventlog list"
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I50a7aa6d55eb46413fe9929e732d6eb18c758d4b
Original-Reviewed-on: https://chromium-review.googlesource.com/199690
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 961c0bd1dd5512b1c2feb2ed4391bf507900eb7a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I6ae4e2a891966d2d1de7d37dcc551383e94e4d75
Reviewed-on: http://review.coreboot.org/7991
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
The static allocator only worked for x86 anyway.
Change-Id: Iadaab225fea04b455c559c25b918a2a842b9faca
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8029
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Change-Id: I9210241c902ad8a88980a7c9cdb0d52c460b2541
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/8025
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
It was showing up as a menu item and it should not.
Change-Id: I448f683fbf4187b11821381332f971b1daea29f8
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/8027
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Fix a trivial tab/space indent inconsistency while here.
Change-Id: I819d85293e1a070817cd13349a220ba85ba89951
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7984
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Combine four patches dependencies. These will not build
individually, so combine them for coreboot.org upstream.
samus: Move SPD handling to separate file
The code to find the SPD data for the mainboard based on GPIOs
is moved from romstage.c into spd.c.
It relies on the updated pei_data structure from broadwell instead
of the haswell interface.
BUG=chrome-os-partner:28234
TEST=Build and boot on samus
CQ-DEPEND=CL:199921
CQ-DEPEND=CL:199922
CQ-DEPEND=CL:199923
CQ-DEPEND=CL:199943
CQ-DEPEND=CL:*163751
Original-Change-Id: I5bd56f81884dae117b35a1ffa5fb6e804fd3cb9c
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199920
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 0bd2de4ba5eb8ba5e9d43f8e82ce9ff7587eab62)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
samus: Move PEI data structure init to separate file
This needs to be executed in both romstage and ramstage
for the different PEI binary stages.
It uses the broadwell interface now instead of haswell.
BUG=chrome-os-partner:28234
TEST=Build and boot on samus
CQ-DEPEND=CL:199920
CQ-DEPEND=CL:199922
CQ-DEPEND=CL:199923
CQ-DEPEND=CL:199943
CQ-DEPEND=CL:*163751
Original-Change-Id: Ida05bd17b9e54f08ed0e2767361c9301a2e97709
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199921
(cherry picked from commit 89f98a27ea561ec63e716b1f6446d92822a6a5de)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
samus: Convert mainboard to use soc/intel/broadwell
Switch from the haswell cpu/northbridge/southbridge interface
to the soc/intel/broadwell interface.
- Use new headers where appropriate
- Remove code that is now done by the SOC generic code
- Update GPIO map to drop LP specific handling
- Update INT15 handlers, drop all but the boot display hook
BUG=chrome-os-partner:28234
TEST=Build and boot on samus
CQ-DEPEND=CL:199920
CQ-DEPEND=CL:199921
CQ-DEPEND=CL:199923
CQ-DEPEND=CL:199943
CQ-DEPEND=CL:*163751
Original-Change-Id: I56f3543612e89e2cdb4256b1bcd4279f5546b918
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199922
(cherry picked from commit 715dbb06e9f79d1ec3647330311c45aa29362375)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
samus: Add some code to print basic info from SPD
The handling of LPDDR is a bit messy in Intel platforms. There
is no traditional SPD so instead one is created by hand from the
provided datasheets.
These have varying (and sometimes unexpected) geometry and it can
be important during bringup to know what configuration is being
passed to the memory training code.
This could in theory be put in a more generic location, but for now
this is the only board with LPDDR3 where I have found it valuable.
BUG=chrome-os-partner:28234
TEST=Build and boot on samus, look for SPD details on the console.
CQ-DEPEND=CL:199920
CQ-DEPEND=CL:199921
CQ-DEPEND=CL:199922
CQ-DEPEND=CL:199943
CQ-DEPEND=CL:*163751
Original-Change-Id: Ibce0187ceb77d37552ffa1b4a5935061d7019259
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199923
(cherry picked from commit 3f36348dd7abc67048407f181065f1a99b3d0dab)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I1d19dffbd0b2e838d1946670a0bee9f8e121869d
Reviewed-on: http://review.coreboot.org/7943
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Hook the soc/intel/broadwell directory into the configuration
and build system so it can be used by mainboards.
BUG=chrome-os-partner:28234
TEST=build and boot on wtm2
Original-Change-Id: Ia48ac644a8cefb2cf9c64efaa1bd9737ddfb8b1f
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199893
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit ee290d7f6e541999e077bcf871cd6c7b6504f3d6)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Iea5f37a839b516ac98227cc1737ce0d03f7e7e3b
Reviewed-on: http://review.coreboot.org/7940
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Updated Intel Broadwell for differences in the source based on
the chromium tree. It is missing most of the recent updates
on coreboot.org.
- makefile changes for Elog and IDF tool
- kconfig changes for ME, ucode, and other updates
- update oprom flag
- update timestamp mechanism
- cbfs payload function is now generic
Change-Id: I82bd0792e9dcf81085246873164de6600528d6fe
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7939
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
A typical SPI operation consists of two phases - command and data
transfers. Command transfer is always from the host to the chip (i.e.
is going in the 'write' direction), data transfer could be either read
or write.
We don't want the receive FIFO to be operating while the command phase
is in progress. A simple way to keep the receive FIFO shut down is to
not to enable it until the command phase is completed.
Selective control of the receive FIFO allows to consolidate the
receive and transmit functions in a single spi_xfer() function, as it
happens in other SPI controller drivers.
The FIFO FULL and FIFO NOT EMPTY conditions are used to decide if the
next byte can be written or received, respectively. While data is
being received the 0xFF bytes are transmitted per each received byte,
to keep the SPI bus clocking.
The data structure describing the three GSBI ports is moved from the
.h file into .c file. A version of the clrsetbits macro is added to
work with integer addresses instead of pointers.
BUG=chrome-os-partner:27784
TEST=not yet, but with the res of the changes the bootblock loads and
starts the rombase section successfully.
Original-Change-Id: I78cd0054f1a8f5e1d7213f38ef8de31486238aba
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/197779
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit c101ae306d182bbe14935ee139a25968388d745a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I7f3fd0524ec6c10008ff514e8a8f1d14a700732f
Reviewed-on: http://review.coreboot.org/7983
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
The original patch from chromium was a bit of a mishmash.
Between that, rebasing and using the coreboot.org UART infrastructure,
the patch has changed a bit from the original. It seems reasonable to
keep these changes together.
- build in the ipq UART and turn on bootblock console
- sets LPAE and ROM header address
- adds cpd.c to storm
The original commit:
ipq8064: make UART driver work in bootblock
This patch it the last one in the chain adapting the ipq9064 UART
driver for use in coreboot. A new config option
(CONSOLE_SERIAL_IPQ806X) is being introduced to control inclusion of
the driver.
The previously introduced uart_wrapper.c is now included in the build
to provide the console driver structure used by ramstage.
Necessary configuration options are added to allow use of UART in the
bootblock.
BUG=chrome-os-partner:27784
TEST=with this change the coreboot image on AP148 prints a banner on
start up:
coreboot-4.0 Wed Apr 23 16:24:51 PDT 2014 starting...
Original-Change-Id: I129ee30ba17a5061b30cfee56c135df31eba98b5
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/196663
(cherry picked from commit 42ca8994361327c24e7a611505b21534dd231f30)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I1175e74ed639cdc27a1a677fba65de2dd2b13a91
Reviewed-on: http://review.coreboot.org/7875
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Make sure the build breaks in case of warnings.
BUG=none
TEST= All builds succeed with the restored patch and fail when a
compilation warning is thrown.
Original-Change-Id: I9bdcd8938f59913e4ba86df5e4921b3f821ef920
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/200110
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 16dde875950d6806cc770cdbee4d3ff456ed6f02)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I86988f8d3f1acaa6ceeabdcbfa3cede1e67c28fe
Reviewed-on: http://review.coreboot.org/7911
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Fix pointer related casts since this can create a problem for 64-bit systems.
BUG=None
BRANCH=None
TEST=Compiled successfully for link, nyan using emerge-* libpayload
Original-Change-Id: I4cbd2d9f1efaaac87c3eba69204337fd6893ed66
Original-Reviewed-on: https://chromium-review.googlesource.com/199564
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 914b118a64b0691aeca463dff24252db9c24109e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I11f070ed5d3eddd8b9be30c428cb24c8439e617b
Reviewed-on: http://review.coreboot.org/7905
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
We relocate GDT to CBMEM, this can be done late in ramstage.
Note: We currently do this for BSP CPU only.
Change-Id: I626faaf22f846433f25ca2253d6a2a5230f50b6b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7858
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
GPIO init marcos are not enough to initialize different gpio attributes
BUG=none
TEST=emerge-rambi coreboot works well
Original-Change-Id: I193fa7b3e22632cacb555e726e3dd3991f4f4faa
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/200531
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 5e0fcbcd7cefcfccb5b565003336d197bb29e4cc)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I6bf4db9397733a003dfdedc6eb63b82127917851
Reviewed-on: http://review.coreboot.org/7953
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The VDDIO to GEN2 I2C SCL/SDA pins is 1.8V and the external
pull-up voltage is 3.3V (the external 3.3V > I/O 1.8V) thus
the pinmux E_OD bit of these two pins needs to be set to
ensure GEN2 I2C pads work fine on 3.3V.
BRANCH=nyan
BUG=none
TEST=observed voltage drop from 3.3V to 2.36V on gen2 i2c
on blaze w/o this change. the waveform looks good on both
scl/sda pins w/ this change.
Original-Change-Id: I1b97f0c9c7580d1e532c3bdf7ac8690241ee7ee3
Original-Signed-off-by: Ken Chang <kenc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/200996
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 2db39166ec525e56a19746f38a867305a2687365)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I0c84eade89311baf0a6f180cb5cc9e2145f6b7ea
Reviewed-on: http://review.coreboot.org/7952
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The kernel will not track wakeup events for devices unless they have
a defined _PRW. There is no EC output of the lid signal coming to
a GPIO and instead it pulses PCH_WAKE#.
BUG=chrome-os-partner:27631
TEST=Manual on Rambi.
- Run lidclose + lidopen on EC console, verify that wakeup_count
increments.
- Run lidclose + lidopen in rapid succession, verify that suspend
request is aborted.
BRANCH=Rambi.
Original-Change-Id: I8d4c58a7bb37d7e474ec094fe96e46e1bfd980de
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/200289
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
(cherry picked from commit 08c6b42f1ed1af7fff6217e6b71469edd7ff4b2e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Iee813ed6f39cd3d5e0a2bdd395c740f82a1cf01a
Reviewed-on: http://review.coreboot.org/7945
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
xHCI Spec says TD Size (5 bits) field shall be forced to 31,
if the number of packets to be scheduled is greater than 31.
BUG=chrome-os-partner:27837
BRANCH=rambi,nyan
TEST=Manual: Ensure recovery boot with USB 2.0 media on Squawks
works fine without any babble errors.
Original-Change-Id: Iff14000e2a0ca1b28c49d0da921dbb2a350a1bbd
Original-Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Original-Originally-Reviewed-on: https://chromium-review.googlesource.com/202297
Original-Reviewed-on: https://chromium-review.googlesource.com/202330
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
Tested-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit ae58b99370df3a86bf15d84b97db858a968b1dbd)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9668b947f676c109fad9297e5efde91bf7f796fd
Reviewed-on: http://review.coreboot.org/7913
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Add the empty weak function clear_recovery_mode_switch().
Problem:
If GBB_FLAG_DISABLE_EC_SOFTWARE_SYNC is set,
the following will happen:
1. Boot device in recovery mode with Esc + F3 + Pwr.
2. Turn device off with Pwr button.
3. Turn device on with Pwr button.
Device still boots to recovery screen with
recovery_reason:0x02 recovery button pressed.
If GBB_FLAG_DISABLE_EC_SOFTWARE_SYNC isn't set, turning the
device off and on again with the Pwr button does a normal boot.
Solution:
Unconditionally clear the recovery flag.
BUG=chromium:279607
BRANCH=TOT
TEST=Compile OK.
Original-Change-Id: Ie1e3251a6db12e75e385220e9d3791078393b1bf
Original-Signed-off-by: Sheng-Liang Song <ssl@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/197780
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Original-Commit-Queue: Sheng-liang Song <ssl@google.com>
Original-Tested-by: Sheng-liang Song <ssl@google.com>
(cherry picked from commit 18908bb64cef34ca41812814817ef887961bed34)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I71ca9f3ea8d816c865375ec66a0603ca211f23ae
Reviewed-on: http://review.coreboot.org/7895
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Length arguments for VbExTpmSendReceive have type uint32_t but it calls function
which expects size_t. This change converts uint32_t to size_t on call and
size_t to uint32_t on return.
BUG=None
BRANCH=None
TEST=Booted Nyan Big to Linux
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I1971488baae2d060c0cddec7749461c91602a4f9
Original-Reviewed-on: https://chromium-review.googlesource.com/198016
(cherry picked from commit 6830747eb47568f2a2b494624522d37d8945c030)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I20741759e7bbd60dd7044c532287d6b55047e19a
Reviewed-on: http://review.coreboot.org/7894
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
To avoid LCD_VCC glitch on cold reset, set SOC_DISP_ON as GPIO output high.
After gfx initialize is done, set it to native function 2.
BUG=chrome-os-partner:25159
BRANCH=firmware-rambi-5216.B
TEST=Tested on Rambi and squawks, no LCD_VCC glitch anymore.
Original-Change-Id: If16af498e910a8da1d77a9a66456eb767286a61a
Original-Change-Id: Icf62588fa0338f89fafb3fe9246c26f16bcdaa60
Original-Signed-off-by: Kein Yuan <kein.yuan@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/197985
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
(cherry picked from commit 6f7d621678f22133c9825565fedc77d19198b08c)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ibaf547b8d1c27811a1bec9fa3254d559c505a361
Reviewed-on: http://review.coreboot.org/7893
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
If the kernel does not properly handle the TPM and send it a
TPM_SaveState command before suspend then it will not be in
the correct state on resume. In order to easily detect this
case add a new post code for TPM failure and use it in the
vboot resume path.
BUG=chromium:371105
TEST=Build and boot on wtm2.
Original-Change-Id: I412520b521387a8e18ad1c6f5a64b39cdd5c88ec
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199371
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit ff2f0dc56c1a783295710f81567af02729fe1da2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I5baf894fd72922acd79d191e5485ae8ef7e0d559
Reviewed-on: http://review.coreboot.org/7936
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Use the RTC driver interface to find the timestamp for events instead of
reading the CMOS based RTC directly on x86 or punting on ARM. This makes
timestamps available on both architectures, assuming an RTC driver is
available.
BUG=None
TEST=Built and booted on nyan_big and link and verified that the timestamps
in the event log were accurate.
BRANCH=nyan
Original-Change-Id: Id45da53bc7ddfac8dd0978e7f2a3b8bc2c7ea753
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/197798
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 493b05e06dd461532c9366fb09025efb3568a975)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I4fad296ecfeff8987e4a18054661190239245f32
Reviewed-on: http://review.coreboot.org/7891
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The AS3722 PMIC, like many PMICs, has an RTC built into it. This change adds a
driver for it which implements the new RTC API.
BUG=None
TEST=Built and booted with the event log code modified to use this interface.
Verified that events had accurate timestamps.
BRANCH=nyan
Original-Change-Id: I400adccbf84221dcba8d520276bb91b389f72268
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/197796
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 011e49beba3a99abbd122866891e3c20bf1188d2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ibc1d342062c7853a30d195496c077e37a02b35b0
Reviewed-on: http://review.coreboot.org/7890
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This patch has a rather twisted history. It was originally split off
from a chromium patch, which moved ALTCENTURY to Kconfig. However,
since we have no user without ALTCENTURY, we've agreed that the best
way to proceed is to eliminate the non-ALTCENTURY case entirely.
The old commit message and identifiers are kept below for reference:
The availability of "ALTCENTURY" is now set through a kconfig
variable so it can be available to the RTC driver without having to have a
specialized interface.
BUG=None
TEST=Built and booted on Link with the event log code modified to use the RTC
interface. Verified that the event times were accurate.
BRANCH=nyan
Original-Change-Id: Ifa807898e583254e57167fd44932ea86627a02ee
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/197795
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
This is the second half the following patch.
(cherry picked from commit 9e0fd75142d29afe34f6c6b9ce0099f478ca5a93)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8e871f31c3d4be7676abf9454ca90808d1ddca03
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/7987
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
This brings in the banana_cs version of the SPI driver.
BUG=chrome-os-partner:27784
TEST=none
Original-Change-Id: Ie93ec8c962c26fff1f0a235516cd8a4062cab40b
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/194225
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 3cada6e4ed51a6d4f637aa31a1a836352a99d13d)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I0a58a4ddaf9375c22c9b2b249a2baa2c5538ba6c
Reviewed-on: http://review.coreboot.org/7982
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
There is a hub in USB port2 downstream.
BUG=chrome-os-partner:28964
BRANCH=None
TEST=emerge-nyan_blaze coreboot depthcharge chromeos-bootimage and verify usb
port2 is workable
Original-Change-Id: I0e698970729911f401f89594232f9d49e4da93cc
Original-Signed-off-by: Neil Chen <neilc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/200417
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 9316acfe8791585f778eecead95943e6422ca419)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I76e4331ea6e803bfbbddefab449310421c0c1d9c
Reviewed-on: http://review.coreboot.org/7949
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Our tests with the I2C bit clear mechanism (recovering from "lost
arbitration" errors) show that the bit clear hardware does not work
correctly in some situations. When a wedged slave device tries to send
more than one 0-to-1-to-0 transition to the host (e.g. leftover bits
from an aborted read), the controller never transitions the BC_ENABLE
bit back to zero.
This patch adds a long timeout to the bit clear code that waits for
register transitions as a safeguard. This way, We will still eventually
exit the function (probably followed by a reboot). Our tests show that
this will recover from all conditions after at most a few reboots.
BRANCH=nyan
BUG=chrome-os-partner:28323
TEST=Ran wedge_ack and wedge_read tests with software_i2c patch, system
recovered as expected in all cases.
Original-Change-Id: I6c37119130e1240e1ef3a5944582abbcd2e39ff0
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/200265
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 4c8d0af25cf107a38c856b38067b8f2f74384f22)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I600d5c9a8e68719cf8795c083c5fac63f626f5bf
Reviewed-on: http://review.coreboot.org/7948
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
This patch adds I2C emulation in software through raw toggling of the
SDA/SCL lines. Platforms need to provide bindings to toggle their
respective I2C busses for this to work (e.g. by pinmuxing them as GPIOs,
currently only enabled for Tegra).
This is mostly useful as a debugging feature, to drive unusual states on
a bus and closely monitor the device output without the need of a bus
analyzer. It provides a few functions to "wedge" an I2C bus by aborting
a transaction at certain points, which can be used to test if a system
can correctly recover from an ill-timed reboot. However, it can also
dynamically replace the existing I2C transfer functions and drive
some/all I2C transfers on the system, which might be useful if a driver
for the actual I2C controller hardware is not (yet) available.
Based on original code by Doug Anderson <dianders@chromium.org> and
Hung-ying Tyan <tyanh@chromium.org> for the ChromeOS embedded
controller project.
BRANCH=None
BUG=chrome-os-partner:28323
TEST=Spread tegra_software_i2c_init()/tegra_software_i2c_disable()
through the code and see that everything still works.
Original-Change-Id: I9ee7ccbd1efb38206669a35d0c3318af16f8be63
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/198791
Original-Reviewed-by: Doug Anderson <dianders@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 8f71503dbbd74c5298e90e2163b67d4efe3e89db)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id6c5f75bb5baaabd62b6b1fc26c2c71d9f1ce682
Reviewed-on: http://review.coreboot.org/7947
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
When doing DP attach, we need to make sure the register change to
take effect immediately, otherwise it may fail to catch the attach
timing.
BRANCH=None
BUG=chrome-os-partner:28128
TEST=Display works and system boots up on Nyan and Big
Original-Change-Id: I569dc435a1aa4aac0d5ecd0655d2ad87a791246d
Original-Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/200414
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 47b86e2893fa667bebada6a0e0b443886dd5ee02)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Icf809b46e675bbdb8633d9a4f31d005d6644bd2a
Reviewed-on: http://review.coreboot.org/7951
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
We initialized the dc before the plld's initialization. So some
of the dc init settings did not took effect. This patch moves
the clock_display() before the dc init call.
BRANCH=None
BUG=chrome-os-partner:28128
TEST=Display works and system boots up on Nyan and Big
Original-Change-Id: If2c40e2526fdf7a6aa33a2684ba324bd0ec40e90
Original-Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/200413
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit dc3cc253c319c21772c30962d963ec9dfc4944a7)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I021290f4293c740666d460f73fecbe79146896a4
Reviewed-on: http://review.coreboot.org/7950
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
BUG=none
BRANCH=nyan
TEST=built and booted on Big under various modes, verified that
expected boot mode showed up using "mosys eventlog list"
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I8d98487a2cb910874c8d741008ae59a6c89102e7
Original-Reviewed-on: https://chromium-review.googlesource.com/199691
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 9f4b2574c1af23dcdc01706e9a118441f46a0f97)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ibbf264a1e05323dfddb7cdb270ee6f2d49e83eff
Reviewed-on: http://review.coreboot.org/7946
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Provide elog stub functions so eventlog support can be omitted
without littering code with "#if CONFIG_ELOG".
This makes it so coreboot can be built without eventlog support for
these platforms for debugging purposes.
BUG=none
BRANCH=none
TEST=compiled for Nyan and Rambi with CONFIG_ELOG unset
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Ibf56d29a09234068773378f99ad9bffd5480dc9c
Original-Reviewed-on: https://chromium-review.googlesource.com/198647
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 8e83dd460647972c4f46c19f8dc3d3ad7baeb550)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I3c0803ceb7a1c06da717416c42b6b7730c029ed0
Reviewed-on: http://review.coreboot.org/7901
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
The IO accessor wrappers are used to allow integer register addresses.
A structure defining UART interface configuration is declared and
defined. A few long lines are wrapped. Interface functions are renamed
to match the wrapper API.
cdp.c is edited to fit into coreboot compilation environment, and the
only function required by the UART driver if exposed, the rest are
compiled out for now.
BUG=chrome-os-partner:27784
TEST=after all patches are applied the serial console on AP148 becomes
operational.
Original-Change-Id: I80c824d085036c0f90c52aad77843e87976dbe49
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/196662
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 5e9af53a069cd048334a3a28f0a4ce9df7c96992)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I80c824d085036c0f90c52aad77843e87976dbe49
Reviewed-on: http://review.coreboot.org/7874
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
These patch modifies .h files to match the coreboot API. A few more
significant changes are:
- UART specific fields removed from common board structure in cdp.h.
These fields are set at compile time in u-boot (where this
structure comes from), they will be set in a different structure in
the UART driver in an upcoming patch.
- an inline wrapper is added in gpio.h to provide GPIO API the UART
driver expects.
- the ipq_configure_gpio() is passed the descriptor placed in ro data.
BUG=chrome-os-partner:27784
TEST=none
Original-Change-Id: Id49507fb0c72ef993a89b538cd417b6c86ae3786
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/196661
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit ea400f1b720eb671fa411c5fd1df7efd14fdacd6)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I2c7be09675b225de99be3c94b22e9ee2ebb2cb9a
Reviewed-on: http://review.coreboot.org/7873
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Make sure it is initialized at different stages.
BUG=chrome-os-partner:27784
TEST=manual
. not much at this point, just verified that it compiles
Original-Change-Id: I343e7a6648e2ca935606cd76befd204aabd93726
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on:
https://chromium-review.googlesource.com/196592
(cherry picked from commit aedc41924313e5c21aef97b036f5a0643d59082d)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I4a90ae5ba6c9a561b7d5c938d18b6ea2b855855f
Reviewed-on: http://review.coreboot.org/7981
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The following patches had to be squashed
to properly build all the different ARM boards.
ipq8064: storm: re-arrange bootblock initialization
The recent addition of the storm bootblock initialization broke
compilation of Exynos platforms. The SOC specific code needs to be
kept in the respective source files, not in the common CPU code.
As of now coreboot does not provide a separate SOC initialization API.
In general it makes sense to invoke SOC initialization from the board
initialization code, as the board knows what SOC it is running on.
Presently all what's need initialization on 8064 is the timer. This
patch adds the SOC initialization framework for 8064 and moves there
the related code.
BUG=chrome-os-partner:27784
TEST=manual
. nyan_big, peach_pit, and storm targets build fine now.
Original-Change-Id: Iae9a021f8cbf7d009770b02d798147a3e08420e8
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/197835
(cherry picked from commit 3ea7307b531b1a78c692e4f71a0d81b32108ebf0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
arm: Redesign mainboard and SoC hooks for bootblock
This patch makes some slight changes to the way bootblock_cpu_init() and
bootblock_mainboard_init() are used on ARM. Experience has shown that
nearly every board needs either one or both of these hooks, so having
explicit Kconfigs for them has become unwieldy. Instead, this patch
implements them as a weak symbol that can be overridden by mainboard/SoC
code, as the more recent arm64_soc_init() is also doing.
Since the whole concept of a single "CPU" on ARM systems has kinda died
out, rename bootblock_cpu_init() to bootblock_soc_init(). (This had
already been done on Storm/ipq806x, which is now adjusted to directly
use the generic hook.) Also add a proper license header to
bootblock_common.h that was somehow missing.
Leaving non-ARM32 architectures out for now, since they are still using
the really old and weird x86 model of directly including a file. These
architectures should also eventually be aligned with the cleaner ARM32
model as they mature.
BRANCH=None
BUG=chrome-os-partner:32123
TEST=Booted on Pinky. Compiled for Storm and confirmed in the
disassembly that bootblock_soc_init() is still compiled in and called
right before the (now no-op) bootblock_mainboard_init().
Original-Change-Id: I57013b99c3af455cc3d7e78f344888d27ffb8d79
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/231940
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 257aaee9e3aeeffe50ed54de7342dd2bc9baae76)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id055fe60a8caf63a9787138811dc69ac04dfba57
Reviewed-on: http://review.coreboot.org/7879
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
When emerging libpayload a warning is generated about selfboot() being
defined without a prior prototype.
Add cbfs.h when CBFS use if compiled fixes the warning.
BUG=none
TEST=build rambi storm nyan_big
verify that there is no compilation warnings thrown any more
Original-Change-Id: Ic9cb5571f708bb006a0d477e451fd1f3b3eb833f
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/200099
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit 7e4aa17936b70dd08f58b3a55c6db55ea03709d7)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ie3baaaca82fb6ec432860c638acb2a3ef9451469
Reviewed-on: http://review.coreboot.org/7909
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
The calling convention of payload entry function is different by architecture.
For example, X86 takes no arguments and ARM needs first param to be a
cb_header_ptr*.
To help payloads load and execute other payloads easily and correctly, we should
provide the selfboot() function in libpayload, using same prototype as defined
in coreboot environment.
BUG=none
TEST=emerge-nyan libpayload # pass
BRANCH=none
Original-Change-Id: I8f1cb2c0df788794b2f6f7f5500a3910328a4f84
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199503
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 1e916cf021ce68886eb9668982c392eadedc7b7e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I7279ef27f49ef581d25a455dd8f1f2f7f1ba58cb
Reviewed-on: http://review.coreboot.org/7907
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Vadim Bendebury