Instead of 500, print 0x00000500 in the ram dump module.
Change-Id: Id250bd99f36dad4088ab88953fb371c400b4231b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14072
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
MEMMAP_RAM_ONLY is not an architecture specific option,
hence move it out of the architecture specific menu.
Change-Id: Iaeef03ed8cbff930a580ad03b1e712087b48714e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14071
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This is adding complexity to the code more than it saves
space, plus some of the tables could potentially be interesting
outside of the ChromeOS context.
Change-Id: I4bf24608f3e26d3b7871a5031ae8f03bc2c8c21f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14070
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Bring defconfig and defconfig-tinycurses in sync, so that
defconfig and defconfig-tinycurses only differ in the selection
of the curses implementation.
Change-Id: I739c5122b5aaaa2681055c845905721a0b2a11c1
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14069
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Since libpayload's LAR support was dropped in If6e36569cd, this module
doesn't compile anymore.
Change-Id: I98f25613a1728e94704d9e9ccb65fd6ba33968b9
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14037
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add an option to specify a git revision from which to build SeaBIOS.
Change-Id: Ifbf3b82e784f79395ab7cd07c5804f72928d7640
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/13937
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: build bot (Jenkins)
- Change the makefile command $(shell pwd) to $(CURDIR) to find the
current directory without going out to the shell.
Change-Id: I4890eba6129630acd2883b92de77308d39949443
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13967
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Libpayload installs into the libpayload/ directory under the directory
you point it to. Since we were pointing it to build/libpayload, it
was installing to build/libpayload/libpayload.
Change-Id: I11029fcfb232d9b66eb3f310fa9e663236d4b213
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13966
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
With this patch the numbers are the "base" addresses for the lines,
which is consistent with the PCI configuration space view.
Change-Id: I2c70d976f6f9f9f615d13bc7a634d6f8037e0c7b
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14028
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
... instead of the overall first one.
Change-Id: If9b2674ff2ef83b7c24a3388316b6f4128bc1007
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14027
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
An alternative to this patch is to copy the filetypes table from
util/cbfstool/cbfs.h and use that.
Change-Id: Iebf3a7a8912761ff6825a6f51c8b68df0dcc5990
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14026
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
- Rename obj to coreinfo_obj so it doesn't conflict with the obj
variable in libpayload.
Change-Id: I2ffb06a87e30a5eeff5b0dfc0ba62b5e9ab46e26
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13938
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Currently, if SeaBIOS is set as the payload, it gets rebuilt every
single time we do a build.
Change it to re-build just when there’s a config change.
Change-Id: Ib141f2cbf8796d449172432bb30fa4806cf90328
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13948
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This doesn't do anything more than the clean target, but having both
clean and distclean targets in all makefiles makes standardizing the
cleaning routines easier.
Change-Id: I41578de371a8f767ee23266c30e65e928f0985c4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13939
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Previously the SeaBIOS directory would never get updated after the
initial clone because the tag would always match. This can be shown
by noticing that the text 'Fetching new commits from the SeaBIOS
git repo' is never seen.
This change will always try to pull the latest code if 'Master'
is selected.
Change-Id: I460e2fb0c6f683a0f85343d164880c2d9e6d95cc
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13947
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Fix up commit 4f66648c (payloads/seabios: Upgrade stable from 1.9.0 to
1.9.1), forgetting to update the version number displayed in the Kconfig
menu, by updating the string to 1.9.1.
Change-Id: Idb395d0ea65bcf91c7c9645fd76d428936e91587
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/14010
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
To keep the list of 'secondary' payloads from cluttering the payloads
menu, move them into their own menu under the payloads menu. Then they
don't need any dependencies other than the architecture.
Change-Id: I95119750c6ef627ef0de9b5f5cbad085a51ac2bb
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13941
Tested-by: build bot (Jenkins)
Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
SeaBIOS 1.9.1 was released on February 15th, 2016 [1][2] with the changes
below.
```
$ git log --oneline --reverse rel-1.9.0..rel-1.9.1
3403ac4 build: fix typo in buildversion.py
fe4154e xhci: Check for device disconnects during USB2 reset polling
c016236 xhci: Wait for port enable even for USB3 devices
0240428 sdcard: Only enable error_irq_enable for bits defined in SDHCI v1 spec
fe8d986 sdcard: fix typo causing 32bit write to 16bit block_size field
e902d3f nmi: Don't try to switch onto extra stack in NMI handler
dc6498e scsi: Do not call printf() from scsi_is_ready()
6027043 coreboot: Check for unaligned cbfs header
73f00bc fw/pci: do not automatically allocate IO region for PCIe bridges
b3ef39f biostables: Support SMBIOS 2.6+ UUID format
```
[1] http://www.seabios.org/Releases#SeaBIOS_1.9.1
[2] http://seabios.org/pipermail/seabios/2016-February/010493.html
Change-Id: I4bc8224c2a80cbcce54621e941a9c3a92ca04215
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/13933
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
This allows memtest86+ to be added to CBFS as a 'secondary'
payload on x86 systems, to be loaded by the main payload
if desired.
Selecting this option, which defaults to no, builds the memtest86+
payload and adds it to CBFS as `img/memtest` which can then be
loaded by for example SeaBIOS or GRUB.
Change-Id: Iecf876aaf588ba1df7abdf6668cb26f089bf5f42
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13858
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
Without this change it'll get a build error with crossgcc-x64
because $(AS) is "util/crossgcc/xgcc/bin/x86_64-elf-as --32",
and running $(LPAS) (i.e. AS=$(AS) lpas) will run "--32" instead of
"x86_64-elf-as".
Change-Id: I95e5630cb1d4f1ce81a8ca8a7bf338450b325f02
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/13845
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This allows coreinfo to be added to CBFS as a 'secondary'
payload on x86 systems, to be loaded by the main payload
if desired.
Selecting this option, which defaults to no, builds the coreinfo
payload and adds it to CBFS as `img/coreinfo` which can then be
loaded by for example SeaBIOS or GRUB.
Change-Id: I52661d486823bc4bb215ce92dca118c9d2c2a309
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13728
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Users had to build nvramcui manually because payload.sh was only meant
for abuild. Now the user can build it with:
cd payloads/libpayload/ && make menuconfig && make && make install
cd ../nvramcui && make
Change-Id: I409a3c39a1e1738e8071febb1a3f169e1aee959a
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/13778
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When U-Boot isn't selected as a payload, two of the targets:
$(project_dir): and $(project_dir)/$(TAG-y) evaluated to the same
value, generating a make warning when running a clean. By adding
additional text to the file that is created, this is avoided.
Gets rid of these warnings:
Makefile.inc:54: warning: overriding commands for target `u-boot'
Makefile.inc:37: warning: ignoring old commands for target `u-boot'
Change-Id: I4b4df753612b674b3ccde2a757338840be92d1f2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13767
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch ports the LZ4 decompression code that debuted in libpayload
last year to coreboot for use in CBFS stages (upgrading the base
algorithm to LZ4's dev branch to access the new in-place decompression
checks). This is especially useful for pre-RAM stages in constrained
SRAM-based systems, which previously could not be compressed due to
the size requirements of the LZMA scratchpad and bounce buffer. The
LZ4 algorithm offers a very lean decompressor function and in-place
decompression support to achieve roughly the same boot speed gains
(trading compression ratio for decompression time) with nearly no
memory overhead.
For now we only activate it for the stages that had previously not been
compressed at all on non-XIP (read: non-x86) boards. In the future we
may also consider replacing LZMA completely for certain boards, since
which algorithm wins out on boot speed depends on board-specific
parameters (architecture, processor speed, SPI transfer rate, etc.).
BRANCH=None
BUG=None
TEST=Built and booted Oak, Jerry, Nyan and Falco. Measured boot time on
Oak to be about ~20ms faster (cutting load times for affected stages
almost in half).
Change-Id: Iec256c0e6d585d1b69985461939884a54e3ab900
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13638
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
When CONFIG_LP_TIMER_RDTSC is enabled honor the TSC information
exported in the coreboot tables as the cpu_khz frequency. That
allows get_cpu_speed() not to be called which currently relies
on the 8254 PIT. As certain x86 platforms allow that device
to be optional or turned off for power saving reasons, allow
a path where get_cpu_speed() is no longer called. Additionally,
this approach also allows the libpayload to not duplicate logic
that already exists in coreboot.
BUG=chrome-os-partner:50214
BRANCH=glados
TEST=Confirmed in payload TSC frequency is honored instead of
using get_cpu_speed().
Change-Id: Ib8993afdfb49065d43de705d6dbbdb9174b6f2c4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13671
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
- Add Kconfig and Makefile options to use U-Boot as a payload.
- Add Kconfig option for extra cbfstool command line arguments.
- Add Kconfig & Makefile option to load the payload as a flat binary.
- Add u-boot directory to .gitignore.
This is currently working for X-86 only.
Graphics worked in U-Boot correctly by initializing the VBIOS and
setting up a console mode.
Tested in QEMU and on Minnowboard Max. Got into U-Boot, have not
booted an OS yet.
Change-Id: Ia122a4ad7cd7d96107c1552b0376c8106ca8fb92
Signed-off-by: Martin Roth <martinroth@google.com>
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/12714
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
SeaBIOS only supports standard IO based serial ports. If the serial
port being used by coreboot isn't a standard IO serial port, disable
the serial console in the SeaBIOS build.
Change-Id: I386b46625fca0bd0a5416ed9831f8370c294ed74
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13617
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This fixes serial on rk3288.
Change-Id: I3dbf3cc165e516ed7b0132332624f882c0c9b27f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13636
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Move the payloads section of the kconfig tree out of the top level
kconfig file and into a separate Kconfig just for payloads before
it starts to get added to.
Change-Id: I4f52818f862bf1aeba538c1c6ed93211a78b9853
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13608
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add a single target to do the full coreinfo build using default Kconfig
values for both coreinfo and libpayload.
Change-Id: Id622fb2df480e826f6d868dbe01385d76587be26
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13426
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
config and revision data need to be around before they're added to CBFS.
Change-Id: I195156773effd5137c3fda3639c002fbec6e7158
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12971
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
These files need to be added to cbfs-files after PAYLOAD_CONFIG
and PAYLOAD_VERSION have been defined. Where they were before,
they didn't get added to the final build.
Change-Id: Ib1b230f9eb72a8c1710ef473a9f24c0fb7ec6e17
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12751
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
archive.h is a header file for the programs which need to parse an archive
created by 'archive' tool. See archive.h for the format description.
BUG=chromium:502066
BRANCH=tot
TEST=Tested on Glados
Change-Id: I2bee9d7c12b0e1bce1529dfef360c5fa4ce0872d
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/311201
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://review.coreboot.org/12734
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Update to use the CONFIG_LP_8250_SERIAL_CONSOLE instead of the removed
CONFIG_LP_8250_MMIO32_SERIAL_CONSOLE.
- CONFIG_LP_LZ4 and CONFIG_LP_PL011_SERIAL_CONSOLE are set to the
default values for these new config options.
CONFIG_LP_8250_MMIO32_SERIAL_CONSOLE was removed in
commit 4d5317e5 (libpayload: Remove redundant 8250 MMIO32 UART driver)
Change-Id: I97461c5e0c14075dcf8a35c96a0b0f1651e2e8e4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12654
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Update to use the CONFIG_LP_8250_SERIAL_CONSOLE instead of the removed
CONFIG_LP_8250_MMIO32_SERIAL_CONSOLE.
- CONFIG_LP_LZ4 and CONFIG_LP_PL011_SERIAL_CONSOLE are set to the
default values for these new config options.
CONFIG_LP_8250_MMIO32_SERIAL_CONSOLE was removed in
commit 4d5317e5 (libpayload: Remove redundant 8250 MMIO32 UART driver)
Change-Id: I2775c3676d5f458a4c31fe0c1d571bc2b9221a5c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12653
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
SeaBIOS dropped support of VERSION variable and
is reproducible without it.
Change-Id: Iea1dc20e18aa5c274060e3cd55cd9e95086a602d
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/12645
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Kevin O'Connor <kevin@koconnor.net>
Make sure the build system knows how to start building the various
integrated payloads we support.
Change-Id: I2128d09c78795e0a41b055975e9f7052e3d951ee
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: https://review.coreboot.org/12641
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
We don't need COREBOOT_ROM_DEPENDENCIES anymore because the dependencies
are taken care of by the cbfs-files mechanism. REFCODE_BLOB also doesn't
need to be an explicit dependency.
Change-Id: I3f32cce79683e57a174724179bc2ac59a8cdda94
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12648
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
SeaBIOS updated how versioning is done, and out/version.c no longer
exists. The new file with version information is autoversion.h.
Change-Id: I10abee73ecc51e52c9ff7a2e7a9099339b1a4b40
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12567
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
* The default boot menu key is now the ESC key (instead of F12)
* Initial support for Trusted Platform Module (TPM) hardware and BIOS calls
* Initial support for chain loading SeaBIOS from Grub (via multiboot
support)
* Initial support for booting from SD cards on real hardware
* virtio 1.0 device support
* The build will no longer include the build hostname or build time on
"clean" builds. This makes the build binaries more "reproducible".
* Basic support for running SeaBIOS on Baytrail Chromebooks
* SeaVGABIOS improvements:
* Improved support for old versions of x86emu (the "leal"
instruction is now emulated)
* Several bug fixes and code cleanups
Change-Id: Ifbd50f1884959fed4c4f666b87f2ef7b4769c6d3
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/12566
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Kevin O'Connor <kevin@koconnor.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This has been replaced by the PAYLOAD_CONFIGFILE option, allowing
any SeaBIOS config option to be set by a platform.
Change-Id: I584c4c481266740840158baba76581d68e69b448
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12570
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Instead of adding various SeaBIOS options into the coreboot Kconfig,
just add a way to use saved SeaBIOS .config files. These files
can contain full SeaBIOS .configs, but is really intended for individual
options.
The coreboot Kconfig options take precedence over the settings in the
saved .config.
Change-Id: Ia7f9c76555b8e290777207b3f637c94c4d67a782
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12568
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
This change revives the path which was made inert by CL:308520. When
media == CBFS_DEFAULT_MEDIA, cbfs_get_file replaces it with a pointer
to a default media. Thus, get_cbfs_range does not set cbfs offset &
size from lib_sysinfo.
BUG=chrome-os-partner:47772
BRANCH=tot
TEST=Tested on Jerry and Glados
Change-Id: I012f7871336dd24b8eada5c96c4d72117921b0d2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 279ba344788b4ba85f500e6cfcca8199af6d0a89
Original-Change-Id: I7f0798881519026a23d0801d0a790332ab878ff0
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/313205
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12583
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Stefan Reinauer