Add some configuration options that allow tuning the VR for C-state
settings that may be able to reduce noise.
- Add option to enable slow VR ramp rate for C-state exit
- Add variable to configure the minimum C6/C7 voltage
BUG=chrome-os-partner:34771
BRANCH=broadwell
TEST=build and boot on samus
Change-Id: I01445d62fbfcf200b787b924d8d72685819a4715
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: ed8f355e60292c82791817ae31bff58ac2390a72
Original-Change-Id: I8af75b69c8b55d3e210170ee96f8e22c2fd76374
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/241950
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9497
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reduce the SATA Gen3 TX voltage amplitude by 210mV based
on the provided test results to help with SATA validation.
BUG=chrome-os-partner:34121
BRANCH=samus
TEST=build and boot on samus and ensure SATA is still working,
firmware image will be provided for full validation.
Change-Id: I574d2f457b7b6831a339602a4165e959a0e2ee7d
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 9500ec152d8f9c90513811b1a92d1a8c155f514a
Original-Change-Id: I233fa1a9a7f2877a97ef6834304680f82b958e82
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/241800
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9496
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
To ensure that boot flags (legacy, usb, signed-only) are
properly restored from CMOS and used in the first boot after
a battery removal or RTC reset then the VbNv region needs to
be preserved around the cmos_init call.
When using vboot firmware selection and VbNv is stored in CMOS
then that region of CMOS will have been re-initialized by the
time we call cmos_init and reset CMOS if the chipset flag was
set indicating a problem.
BUG=chrome-os-partner:35240
BRANCH=broadwell
TEST=manual testing on samus:
1) boot in dev mode, enable dev_boot_legacy and ensure it works
2) on EC console pulse PCH_RTCRST_L low for a second
3) ensure first boot after RTC reset will still boot legacy mode
4) remove battery for a time
5) ensure first boot after battery is re-inserted will still
boot legacy mode
Change-Id: Ica256bbdcba6d4616957ff38e63914dd15f645c6
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 881c7841c95dec392a66eef38a7112c1f385fdfa
Original-Change-Id: I4c33f183ba4b301d68ae31c41fc6663f3be857b0
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/241529
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9495
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This function will use the next available/free protected range
register to cover the specified region of flash and write
protect it until the next reset.
This will be used by the common MRC cache code to protect the
RW_MRC_CACHE region after it is updated.
In order to communicate to the common NVM code that this function
is defined also enable CONFIG_MRC_SETTINGS_PROTECT variable.
BUG=chrome-os-partner:28234
BRANCH=broadwell
TEST=build and boot on samus
Change-Id: I710c6a69f725479411ed978cc615e1bb78fb42b8
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 25365433be0f190e10a96d9946b8ea90c883b78a
Original-Change-Id: I4a4cd27f9f4a94b9134dcba623f33b114299818f
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/241129
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9493
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In order for recovery request to be cleared with software sync disabled
we need to implement this function in the mainboard.
BUG=chrome-os-partner:28234
BRANCH=samus
TEST=boot in recovery with software sync disabled, ensure that the next
boot will not boot in recovery again.
Change-Id: Ie9c845396dfc6ab65296b2f18a86e23590c833d6
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 430f85608cc3b59a68a86dba64ffe428bfc216a9
Original-Change-Id: Iac15b6a1b23cc971231339439bceb013f4a031bd
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/241052
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9492
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
With recent changes in the 3.14 kernel and the switch to not
using X the panel backlight is not geting turned on until
chrome is started which means the splash screen is not visible.
If we set the backlight PWM in coreboot then it will at least
turn on for the early boot process.
BUG=chrome-os-partner:31549
BRANCH=samus
TEST=boot on samus in normal mode and see the boot splash logo
Change-Id: I81e6b90617acb181b4de3365f8f56ec3b846b78b
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: f850fe3faff268a64f18e6bd176ec1126b921e3b
Original-Change-Id: I622bef8af9bb6b753fe228b33ecdc4aae76af131
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240853
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9491
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In order for some panels to meet spec when the system is put
into S5 by way of power button during firmware (i.e. not by
the OS) then it needs to turn off the backlight and give it
time to turn off before going into S5.
If the OS properly sequences the panel down then the backlight
enable bit will not be set in this step and nothing will happen.
BUG=chrome-os-partner:33994
BRANCH=broadwell
TEST=build and boot on samus
Change-Id: Ic86f388218f889b1fe690cc1bfc5c3e233e95115
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: e3c9c131a87bae380e1fd3f96c9ad780441add56
Original-Change-Id: I43c5aee8e32768fc9e82790c9f7ceda0ed17ed13
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240852
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9490
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
When disabling PCIe ports skip steps if no card is detected.
This prevents the loop from timing out on each empty slot.
BUG=chrome-os-partner:31424
BRANCH=broadwell
TEST=build and boot on samus, check that this code is
no longer timing out when disabling PCIe ports
Change-Id: I84ee0e0e325784b3af06abe70420c07cf6e13ed2
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 4d759e2350dd00ceb7df196ac7008729dc1e4cef
Original-Change-Id: Idd88f0f1191a5465a0d8dcca07b5c3a5c5ca8855
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240851
Original-Reviewed-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9489
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The workarounds in ACPI methods for D0/D3 transition that are
used on haswell/LPT do not all apply to broadwell/WPT.
BUG=chrome-os-partner:28234
BRANCH=broadwell
TEST=build and boot on samus, test USB functionality and wake
and ensure the device still does into D3 state
Change-Id: Ic3a75f5bf50e826ade7d942b48cfebb75cf976e6
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 1b54d105957ee80ca34048c42fb8f241731281cf
Original-Change-Id: I877afd51fc6c9b7906e923b893fc31bdf2cd1090
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240850
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9488
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This changes the broadwell graphics init path to only do the delay
before initializing graphics when running chromeos if we are also
going to execute the option rom.
BUG=chrome-os-partner:33671
BRANCH=samus
TEST=build and boot on samus
Change-Id: Idb7d39b22f7f6dc3be6dfbd2fa3cc2e33d78a397
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: f7ed93504a74760f16acb8fb3c6c57ac514b7260
Original-Change-Id: I350f85738efe3d17152de4f025adbfd52ae15b95
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228882
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9474
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
We'll need to find a real ACPI device ID for
the rt5677 SPI driver. "RT5677AA" is temporary.
BUG=chrome-os-partner:33495
BRANCH=samus
TEST=load firmware via SPI; hotword detection works
Change-Id: I6dc55c4641c27a38570debe841a6afeb048eb868
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: f0d7013b62c78deb82db1a431f079c79eded5270
Original-Change-Id: Ifb4a1b12776669e21c0b7c4679246717d72981ad
Original-Signed-off-by: Ben Zhang <benzh@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/235902
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9486
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
HSIOPC/GPIO71 is used to control power to VCCHSIO, VCCUSB3PLL and
VCCSATA3PLL in S0. PCH will drive HSIOPC low when all the high
speed I/O controllers (xHCI, SATA, GbE and PCIe) are idle.
This patch added a few additional PCIe programming steps as required
in 535127 BIOS Writer Guide Rev 2.3.0 to enable this power saving mode.
BUG=none
BRANCH=none
TEST=tested on Paine watching GPIO71 toggling as expected
Change-Id: Ica6954c125ec3129e2659168f1f23dc861ce5708
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: e38f9ef57c480ca5ee420020eb80a1adb3c381d3
Original-Change-Id: I88ef125c681c8631e8b887f7ccf017b90b8c0f10
Original-Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/238580
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9482
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
To support the ACPI device specific properties that conform to the
existing devicetree bindings for this codec (in upstream kernels)
add a _DSD object to the existing codec device.
BUG=chrome-os-partner:29649
BRANCH=samus
TEST=build and boot on samus
Change-Id: Ice808ba7bf2f0378ac5a38afd27dbf6c8cac0da5
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: b3fc2d7e5a5878b1fff7627f803b883b38fea28d
Original-Change-Id: I344636171a3086a72087314503bfc99de5945b1f
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/238857
Original-Reviewed-by: Ben Zhang <benzh@chromium.org>
Reviewed-on: http://review.coreboot.org/9483
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The registers that were used here are for CPT/PPT and not
for HSW/BDW chips.
Update this to update just the Gen3 TX Output Voltage Downscale
Amplitude Adjustment field in the SATA ECR T88.
BUG=chrome-os-partner:28234
BRANCH=samus,auron
TEST=build and boot on samus
Change-Id: I94b702dc4a3c98678ba048ff9cfa4a85cc5b1eed
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 4c5816cc647b84266751e8a591eb85d7735fee12
Original-Change-Id: I98ec9678938a6675828721d5b57683077f555d21
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/238800
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9484
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Added a few bits to set in finalize step from scrubbing BWG
and reference code.
BUG=chrome-os-partner:28234
BRANCH=broadwell
TEST=build and boot on samus
Change-Id: I7b0c4dd3f14c06175c973561760ad1bdafd46fbb
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 3802aef908849fe6ea2bb0034d884064154ae9da
Original-Change-Id: Ia62055b32be039eef84a0f60f0ba307eb5dce6a1
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/239958
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9485
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The original code uses L1EXIT_MASK to shift the bit for
PCIe L1 exit latency, the code should use L1EXIT_SHIFT
for bit shifting.
BUG=chrome-os-partner:34037
BRANCH=None
TEST=build and boot on candy, verify B0:D28:F0 + 4Ch [17:15]
set to 010b. Correspond WIFI device performance got improvement.
Signed-off-by: Kevin L Lee <kevin.l.lee@intel.com>
Change-Id: I3ac5b6319b726aa16cdb9678face89022d979517
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 381827e3d92c9e786cd8ebe412586968662fb4be
Original-Change-Id: I8171f80720830cfa76f26778ae31c7590a723b92
Original-Reviewed-on: https://chromium-review.googlesource.com/234673
Original-Reviewed-by: Kenji Chen <kenji.chen@intel.com>
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Tested-by: Kenji Chen <kenji.chen@intel.com>
Original-Commit-Queue: Kenji Chen <kenji.chen@intel.com>
Reviewed-on: http://review.coreboot.org/9480
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The TPM driver by default allocates a 4K transfer buffer on the stack,
which leads to lots of fun on boards with 2K or 3K stack sizes. On
RK3288 this ends up writing over random memory sections which dependent
on the memlayout of the day might contain timestamp data (no big deal)
or page tables (-> bad time).
This patch fixes the problem by reducing the buffer size to slightly
above 1K, which still seems to work as far as I can tell. There was
already some really odd code that #undef'ed this value and redefined it
with the lower number in one .c file (unfortunately not the one with the
buffer declaration), with no explanation whatsoever... I'm removing that
and just assume the smaller value will be fine for everything.
BRANCH=veyron
BUG=None
TEST=Booted Pinky and Falco.
Change-Id: I440a5662b41cbd8b7becab3113262e1140b7f763
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 3d3288041b6629b7623b9d58816e782e72836b81
Original-Change-Id: Idf80f44cbfb9617c56b64a5c88ebedf7fcb4ec71
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236976
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9481
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Using REG_PCI_POLL32 to check if the LINK is active with 50ms timeout.
BRANCH=none
BUG=chromium:431169
TEST=Test on Enguarde, compile ok and boot OS
Change-Id: If98ab4e31d17ec4e62d68b93edcec6d9aee87367
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: cf692ae9aebb43ab46cb07d36b62b300b16be1dc
Original-Change-Id: I490e6ffa40979628edf52a7444808b6d25a6e83d
Original-Signed-off-by: Kevin Hsieh <kevin.hsieh@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/231777
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9478
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This is being triggered because the base address is added, but
there is nothing that needs done with it in set_resources step
and the ERROR message is tripping suspend resume test scripts.
BUG=chrome-os-partner:33385
BRANCH=samus,auron
TEST=boot on samus and check for ERROR strings,
successfully run suspend_stress_test without failures
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/231603
(cherry picked from commit bb789492965d92e309a913dc7b9f09f7036c5480)
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I565c8af954f1c5a406d2c65f01c274e9259e43ec
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 9062734d884f814dc880589ee615b4d7e1fdc61a
Original-Change-Id: I2b5f44795f1ee445d509b29bd56f498aea7b7fe3
Original-Reviewed-on: https://chromium-review.googlesource.com/231604
Original-Commit-Queue: Duncan Laurie <dlaurie@chromium.org>
Original-Tested-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9476
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Some actions are needed and some are not on the way resume from S3.
BRANCH=master
BUG=chrome-os-partner:33025,chrome-os-partner:33796
TEST=Built the image and confimed the boot_mode is correctly
configured.
Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Change-Id: If400df94f970a55f3921a5a2df24038d28beb489
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 40e719618ec101235cdb1755933e719abd873239
Original-Change-Id: Ia042ea8c63c2306e9d6a80d8efa66c4fc0722d85
Original-Reviewed-on: https://chromium-review.googlesource.com/229615
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Kenji Chen <kenji.chen@intel.com>
Original-Tested-by: Kenji Chen <kenji.chen@intel.com>
Reviewed-on: http://review.coreboot.org/9475
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This combines the board version reading and parsing to
a separate file that is compiled in both romstage (for
early serial output) and ramstage (for smbios tables).
It also adds a new board version that is wrapped back
to number zero as we are running out of available IDs.
BUG=chrome-os-partner:32895
BRANCH=samus
TEST=build and boot on samus EVT1 and EVT2 and check
for proper board versions reported in console and smbios.
Change-Id: I8c8f17708ced7167277a98529ff4597589f53095
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 3ab8bba1021a8dd41dd2210ba73efd2231eb596c
Original-Change-Id: I2aa03e7486a9581f94dc4e12f6f29eb0c5b3bdbb
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229041
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9473
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This adds a ramstage driver for the TPM and allows the interrupt
to be configured in devicetree.cb.
The interrupt vector is set like other PNP devices, and the
interrupt polarity is set with a register configuration variable.
These values are written into locality 0 TPM_INT_VECTOR and
TPM_INT_ENABLE and then all interrupts are disabled so they are
not used in firmware but can be enabled by the OS.
It also adds an ACPI device for the TPM which will configure the
reported interrupt based on what has been written into the TPM
during ramstage. The _STA method returns enabled if CONFIG_LPC_TPM
is enabled, and the _CRS method will only report an interrupt if one
has been set in the TPM itself.
The TPM memory address is added by the driver and declared in the
ACPI code. In order to access it in ACPI a Kconfig entry is added for
the default TPM TIS 1.2 base address. Note that IO address 0x2e is
required to be declared in ACPI for the kernel driver to probe correctly.
BUG=chrome-os-partner:33385
BRANCH=samus,auron
TEST=manual testing on samus:
1) Add TPM device in devicetree.cb with configured interrupt and
ensure that it is functional in the OS.
2) Test with active high and active low, edge triggered and level
triggered setups.
3) Ensure that with no device added to devicetree.cb that the TPM
is still functional in polling mode.
Change-Id: Iee2a1832394dfe32f3ea3700753b8ecc443c7fbf
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: fc2c106caae939467fb07f3a0207adee71dda48e
Original-Change-Id: Id8a5a251f193c71ab2209f85fb470120a3b6a80d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/226661
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9469
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This moves the LPC TPM driver to drivers/pc80/tpm so it can
be turned into a ramstage driver with a chip.h
It includes no other changes yet.
BUG=chrome-os-partner:33385
BRANCH=samus,auron
TEST=emerge-samus coreboot
Change-Id: Iac83e52db96201f37a0086eae9df244f8b8d48d9
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: be2db391f9da80b8b75137af0fe81dc4724bc9d1
Original-Change-Id: I60ddd1d2a3e72bcf169a0b44e0c7ebcb87f4617d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/226660
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9468
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
I2C bus SDA hold time can be marginal with 60ns value, especially
when there is level shifter on the bus. So program it to 300ns
based on Fast-mode specification, which is between 0 to 900ns.
Apply the same timing for Standard-mode as well.
Refer to original bug on BayTrail chrome-os-partner:28092, this
is to carry forward the fix to Broadwell.
BRANCH=chromeos-2013.04
BUG=chrome-os-partner:33378
TEST=suspend resume test, watch for I2C errors
Change-Id: I93200b141602163903f5c9f52b94013bcf3382a5
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 72b82a1d5d836594e7d0f95972cc0dc91ae7ff8c
Original-Change-Id: I995d6868a44f2578a6d0b18dd5e8548f3c3cd494
Original-Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/226386
Original-Reviewed-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9467
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
MEI PCI device has internal logic to flush out the posted writes
before returning completion for non-posted request. When doing a RCBA
write to function disable and then using the PCI CFG RD cycle, need
to do RCBA posting read after writing to it to make sure the write
went through.
As Aaron sugegsted, abstracted function disable path to a common
function.
BUG=chrome-os-partner:33048
TEST=run warm and cold reboot testing
Change-Id: I40d374f1712a9137b3b1eac6bbf2d71078840406
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: f10b368e01aae1fc5dda63f7ac0641dd2636c949
Original-Change-Id: I87aa8ccd604446263fc3621c9a01839a5a75b644
Original-Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/223715
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9462
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
BUG=chrome-os-partner:31424
TEST=Build a image and run on Samus proto boards to confirm if the
settings are applied correctly.
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Change-Id: I9147da86ce26ce7ef1c7034bc3dde0b27b63befa
Original-Commit-Id: 1717505a3fdf41c5972b1c929872577247f9e3b5
Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Original-Change-Id: I8138507506771148420a585fd12897a3bfe91916
Original-Reviewed-on: https://chromium-review.googlesource.com/221387
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9463
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
DDI-A should not need re-enabled in the resume path, just
the resume path when we did not execute VBIOS.
BUG=chrome-os-partner:28234
BRANCH=samus,auron
TEST=build and boot on samus, test suspend+resume
Change-Id: I29d67591ac903bc1d712a956462bcf4a764ef2eb
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: c3fbeac10f3834a6d848154aa3449672871b13df
Original-Change-Id: Iaf7d083c5c92c42b7a117e2d2c9546ada6bf5f76
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/221988
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9461
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In order to report the GPE that woke the system to the kernel
coreboot needs to keep track of the first GPE wake source and
save it in NVS so it can be returned in \_GPE._SWS method.
This is similar to the saving of PM1 status but needs to go
through all the GPE0_STS registers and check for enabled and
triggered events.
A bit of cleanup is done for areas that were touched:
- platform.asl was not formatted correctly
BUG=chrome-os-partner:8127
BRANCH=samus,auron
TEST=manual:
- suspend/resume and wake from EC event like keyboard:
ACPI _SWS is PM1 Index -1 GPE Index 112 ("special" GPIO27)
- suspend/resume and wake from RTC event:
ACPI _SWS is PM1 Index 10 GPE Index -1 (RTC)
- suspend/resume and wake from power button:
ACPI _SWS is PM1 Index 8 GPE Index -1
- suspend/resume and wake from touchpad:
ACPI _SWS is PM1 Index -1 GPE Index 13
- suspend/resume and wake from WLAN:
ACPI _SWS is PM1 Index -1 GPE Index 10
Change-Id: I574f8cd83c8bb42f420e1a00e71a23aa23195f53
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: d4e06c7dfc73f2952ce8f81263e316980aa9760f
Original-Change-Id: I9bfbbe4385f2acc2a50f41ae321b4bae262b7078
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220324
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9460
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Most Baytrail based devices MMIO registers are reported in ACPI
space and the device's PCI config space is disabled. The PCI config
space is required for many "legacy" OSs that don't have the ACPI
driver loading mechanism. Depthcharge signals the legacy boot
path via the SMI 0xCC and the coreboot SMI handler can switch the
device specific registers to re-enable PCI config space.
BUG=chrome-os-partner:30836
BRANCH=None
TEST=Build and boot Rambi SeaBIOS.
Change-Id: I87248936e2a7e026f38c147bdf0df378e605e370
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: dbb9205ee22ffce44e965be51ae0bc62d4ca5dd4
Original-Change-Id: Ia5e54f4330eda10a01ce3de5aa4d86779d6e1bf9
Original-Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/219801
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Mike Loptien <mike.loptien@se-eng.com>
Original-Tested-by: Mike Loptien <mike.loptien@se-eng.com>
Reviewed-on: http://review.coreboot.org/9459
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Changes:
acpi.c - Capitalize an acronym.
early_spi.c - Spelling error.
gpio.c - Capitalization of acronym + sentences.
gpio.h - Capitalization of sentences.
lpc.c - Capitalization of sentences.
soc.c - Spelling error + capitalization of acronym.
I just wanted to go through the process of commiting something onto Gerrit.
Change-Id: Iad2ac5409f883c5b7cbc25e4e296f386ad7e13d0
Signed-off-by: nicky sielicki <nlsielicki@wisc.edu>
Reviewed-on: http://review.coreboot.org/9510
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
Before the change to use vb2_api.h, coreboot needed to know where to
find the vboot2 header files. Now those are all included by
vb2_api.h, so coreboot doesn't need to know about
firmware/2lib/include (and in fact, the 2lib directory is about to go
away).
BUG=chromium:423882
BRANCH=none
TEST=emerge-veyron_pinky coreboot
Original-Change-Id: I7f69ca9cf8d45c325219efceca0cb8d1340f7736
Original-Signed-off-by: Randall Spangler <rspangler@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/233223
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit b4d4a2da1c8b5a5f8f8da51f009227d3a616b096)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I4006f38835ea0f927142a8133bc24caaf2b7a214
Reviewed-on: http://review.coreboot.org/9447
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This will allow vboot2 to continue refactoring without breaking
coreboot, since there's now only a single file which needs to stay in
sync.
BUG=chromium:423882
BRANCH=none
TEST=emerge-veyron_pinky coreboot
CQ-DEPEND=CL:233050
Original-Change-Id: I74cae5f0badfb2d795eb5420354b9e6d0b4710f7
Original-Signed-off-by: Randall Spangler <rspangler@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/233051
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit df55e0365de8da85844f7e7b057ca5d2a9694a8b)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I999af95ccf8c326f2fd2de0f7da50515e02ad904
Reviewed-on: http://review.coreboot.org/9446
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Apparently our initial submission of 16K was a little too generous for
the vboot2 work buffer, and I hear that we should also be well within
bounds for 12K. This patch reduces the minimum asserted by memlayout so
some of our low-mem boards can get a few more kilobytes back for
discretionary spending. Also changes the required minimum alignment to 8
since that's what the current vboot code aligns it to anyway, and add a
warning comment to make it clearer that this is a dangerous number
people should not be playing with lightly.
BRANCH=None
BUG=None
TEST=Built and booted on Pinky.
Original-Change-Id: Iae9c74050500a315c90f5d5517427d755ac1dfea
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/232613
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 64e972f10363451cd544fdf8642bd484463703bc)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I362b8c33cf79534bb76bd7acda44d467563fe133
Reviewed-on: http://review.coreboot.org/9445
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
PHYSICAL_REC_SWITCH is set n by default and y for panther and stumpy.
BUG=none
BRANCH=ToT
TEST=Built nyan_blaze using vboot1/2. Built falco, lumpy, nyan,
blaze, parrot, rambi, samus, storm, pinky with default configuration.
panther and stumpy are not tested because they currently don't build on ToT.
Original-Change-Id: Ic45f78708aaa7e485d2ab459fd1948524edb412f
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/227940
Original-Reviewed-on: https://chromium-review.googlesource.com/229602
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit edb2ba347b48887ffe450586af0351e384faad59)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I277f665cd4f3e1c21745cdc5c7a2cfe148661abe
Reviewed-on: http://review.coreboot.org/9444
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
This adds the RAM config code to the coreboot tables. The purpose is
to expose this information to software running at higher levels, e.g.
to print the RAM config coreboot is using as part of factory tests.
The prototype for ram_code() is in boardid.h since they are closely
related and will likely have common code.
BUG=chrome-os-partner:31728
BRANCH=none
TEST=tested w/ follow-up CLs on pinky
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Idd38ec5b6af16e87dfff2e3750c18fdaea604400
Original-Reviewed-on: https://chromium-review.googlesource.com/227248
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 77dd5fb9347b53bb8a64ad22341257fb3be0c106)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ibe7044cafe0a61214ac2d7fea5f7255b2c11829b
Reviewed-on: http://review.coreboot.org/9438
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
The architectiure check in fmap.c is in fact used to delineate between
platforms where SPI flash is mapped to memory address space and where
it needs to be accessed through CBFS.
In fact cosmos board uses an ARM SOC which also maps SPI flash to
processor address space, this will have to be addressed when that
SOC's support is introduced, for now let's just presume that all but
X86 platforms require CBFS layer to access fmap.
BRANCH=none
BUG=chrome-os-partner:31438
TEST=none
Original-Change-Id: Id135dc63278555a7fc5039a568fb28864f7cb8d1
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/226180
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit b3c04f84504380066c54a6dec93781a4f25a5fc6)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I3a0a70fe583b69b1c9cd8729817bd7062126e1a9
Reviewed-on: http://review.coreboot.org/9436
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
This patch adds functions looking in the VPD for WiFi calibration
data, and if found, copying the calibration blobs into CBMEM.
Two possible key names templates are used: wifi_base64_calibrationX
and wifi_calibrationX, where X is replaced by the WiFi interface
number. Up to four interfaces can be provisioned.
The calibration data will be retrieved from CBMEM by the bootloader
and placed into the device tree before starting the kernel.
The structure of the WiFi calibration data CBMEM entry is defined
locally: it is a concatenation of the blob names and their contents.
Each blob is padded as necessary to make sure that the size divisible
by four.
To make sure that the exactly required amount of memory is allocated
for the CBMEM entry, the function first scans the VPD, caching the
information about the available blobs and calculating their combined
size.
Then the required size CBMEM entry is allocates and the blobs are
copied into it.
BRANCH=storm
BUG=chrome-os-partner:32611
TEST=when this function is called, and the VPD includes calibration
data blobs, the WIFI entry shows up in the list of CBMEM entries
reported by coreboot.
Original-Change-Id: Ibe02dc36ff6254e3b9ad0a5bd2696ca29e1b2be3
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/225271
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 9fe185ae5fdc1a896bf892b498bff27a3462caeb)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ia60f0c5c84decf9854426c4f0cb88f8ccee69046
Reviewed-on: http://review.coreboot.org/9435
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
SeaBIOS doesn't like CC and LD to contain arguments, so split
those out.
Change-Id: Id651719d529adfa8602a3e4f6685228330f36432
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9378
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Kevin O'Connor <kevin@koconnor.net>
Adds AM1ML board. This board has AM1 Socket and supports all
new AM1 APUs from AMD. Based on asrock/imb-a180 board.
Successfully tested with SeaBIOS and Linux 3.8.x and Windows XP.
Successfully tested audio, video, network, PS/2 keyboard and mouse,
PCIe x16, COM port, SATA and USB.
LPT port is not tested yet and it’s unknown if it’s work.
Change-Id: I9ebb9acc590d38e47579adc263f45ae3f607684e
Signed-off-by: Sergej Ivanov <getinaks@gmail.com>
Reviewed-on: http://review.coreboot.org/9293
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Adds option FORCE_AM1_SOCKET_SUPPORT to disable
package type mismatch check between cpu and northbridge.
Default agesa for kabini doesn't know about AM1 socket
so it returns FALSE, that stops memory config code.
With this hack current agesa version supports the AM1 socket.
Change-Id: I99e9cec5cd558087092cf195094df20489f6d3b5
Signed-off-by: Sergej Ivanov <getinaks@gmail.com>
Reviewed-on: http://review.coreboot.org/9291
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
In agesa code for hudson southbridge LPC_DEV is not defined,
but used. Define LPC_DEV as done in southbridge/amd/cimx/sb800.
This fixes it.
Change-Id: Ie7db791e9eb607008e70e446fc6fd28114742750
Signed-off-by: Sergej Ivanov <getinaks@gmail.com>
Reviewed-on: http://review.coreboot.org/9292
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
This isn't done in upstream.
Change-Id: Ief1fea0f231d609372f065f6f6aee7bceaf31efc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9458
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Duncan Laurie