Commit graph

3 commits

Author SHA1 Message Date
Uwe Hermann
c36d506a05 Get mptable OEM/product ID from kconfig variables.
We currently use "COREBOOT" unconditionally as the "OEM ID" in our
mptable.c files, and hardcode the mainboard name in mptable.c like this:

  mptable_init(mc, "DK8-HTX     ", LAPIC_ADDR);

However, the spec says

  "OEM ID: A string that identifies the manufacturer of the system hardware."
  (Table 4-2, page 42)

so "COREBOOT" doesn't match the spec, we should use the hardware vendor name.

Thus, use CONFIG_MAINBOARD_VENDOR which we have already as the "OEM ID"
(truncate/fill it to 8 characters as per spec).

Also, use CONFIG_MAINBOARD_PART_NUMBER (the board name) as "product ID",
and truncate/fill it to 12 characters as per spec, if needed.

Abuild-tested.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coreboot.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6183 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-16 19:51:38 +00:00
Patrick Georgi
7411eabcdb Final set of smp_write_bus -> mptable_write_buses changes.
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6114 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-22 14:14:56 +00:00
Uwe Hermann
2e9323e5be Add a target for the ASUS A8V-E Deluxe (trivial).
For now this is a plain copy of the ASUS A8V-E SE target, I reported
that most of the code also works (sort of) for the ASUS A8V-E Deluxe
a long while ago, see

  http://www.coreboot.org/pipermail/coreboot/2008-March/031866.html
  http://www.coreboot.org/ASUS_A8V-E_Deluxe

There will be a bunch of changes necessary though (devicetree.cb, mptable.c,
ACPI, etc) which do not apply to the A8V-E SE, so we need an extra target.

Also: Increase ID_SECTION_OFFSET on the VIA K8T890/K8M890 southbridge, as
otherwise there will be build errors if the MAINBOARD_PART_NUMBER string
gets too long (as is the case for "A8V-E Deluxe"). The error is:

  ld: section .id loaded at [00000000ffffffd2,00000000ffffffef] overlaps
  section .romstrap loaded at [00000000ffffff80,00000000ffffffd3]

(both with stock Debian gcc and with xgcc)

Increase ID_SECTION_OFFSET (default 0x10) to 0x80 as other southbridges do.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6072 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-14 21:48:14 +00:00