Many ChromeOS devices use a GPIO to reset the system, in order to
guarantee that the TPM cannot be reset without also resetting the CPU.
Often chipset/SoC hardware watchdogs trigger some kind of built-in
CPU reset, bypassing this GPIO and thus leaving the TPM locked. These
ChromeOS devices need to detect that condition in their bootblock and
trigger a second (proper) reboot.
This patch adds some code to generalize this previously
mainboard-specific functionality and uses it on Veyron boards. It also
provides some code to add the proper eventlog entry for a watchdog
reset. Since the second reboot has to happen before firmware
verification and the eventlog is usually only initialized afterwards, we
provide the functionality to place a tombstone in a memlayout-defined
location (which could be SRAM or some MMIO register that is preserved
across reboots).
[pg: Integrates
'mips: Temporarily work around build error caused by <arch/io.h> mismatch]
BRANCH=veyron
BUG=chrome-os-partner:35705
TEST=Run 'mem w 0xff800000 0x9' on a Jerry, watch how a "Hardware
watchdog reset" event appears in the eventlog after the reboot.
Change-Id: I0a33820b236c9328b2f9b20905b69cb934326f2a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fffc484bb89f5129d62739dcb44d08d7f5b30b33
Original-Change-Id: I7ee1d02676e9159794d29e033d71c09fdf4620fd
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/242404
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Id: c919c72ddc9d2e1e18858c0bf49c0ce79f2bc506
Original-Change-Id: I509c842d3393bd810e89ebdf0dc745275c120c1d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/242504
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9749
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BUG=chrome-os-partner:34436
BRANCH=none
TEST=Built and booted on pinky w/ depthcharge fmap patch,
used mosys to verify that eventlog entries get populated:
entry="0" timestamp="2015-01-06 13:45:33" type="Log area cleared" bytes="4096"
entry="1" timestamp="2015-01-06 13:45:33" type="System boot" count="0"
entry="2" timestamp="2015-01-06 13:45:33" type="Chrome OS Developer Mode"
Change-Id: I74ba8b271328453c8b91f11e7858754a80806c31
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 197010f057f4835a30ed2e71f47ca51fc181afe4
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I19cb884be5c3e00975599e96e0223e33d32e7c0d
Original-Reviewed-on: https://chromium-review.googlesource.com/238830
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9644
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Turns out there are uses for memlayout regions not specific to vboot2.
Rather than add yet another set of headers for a single region, let's
make the vboot2 one common for chromeos.
BRANCH=veyron
BUG=chrome-os-partner:35705
TEST=Booted Jerry, compiled Blaze, Cosmos, Ryu and Storm.
Change-Id: I228e0ffce1ccc792e7f5f5be6facaaca2650d818
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c6d7aab9f4e6d0cfa12aa0478288e54ec3096d9b
Original-Change-Id: I1dd7d9c4b6ab24de695d42a38913b6d9b952d49b
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/242630
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9748
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Dependency tracking in incremental builds is currently broken for the
ramstage, due to the intermediate linking step into one ramstage.o file
per directory. The original xxx.ramstage.o files are removed from
ramstage-objs, so they don't end up in allobjs and won't get translated
into DEPENDENCIES. This patch explicitly adds them to DEPENDENCIES
beforehand to resolve the issue.
BRANCH=None
BUG=None
TEST=Built, ran 'touch src/include/cbmem.h' and built again
incrementally. Confirmed that objects dependent on the modified header
such as timestamp.ramstage.o get rebuilt correctly.
Change-Id: I3ba411e4073b38e038445aadceeccfe6c09670c8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9c57d6a8421a109ee3e87567c9add579f9ae761e
Original-Change-Id: Ife529ad8f5c011456c1e0c380356f1b1bb5047cb
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/233571
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9745
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The 4 byte offset value will be stored in SRAM and shared between
different coreboot stages.
BRANCH=storm
BUG=chrome-os-partner:3416, chromium:445938
TEST=with the rest of the patches in, storm successfully boots into
Linux login prompt
Change-Id: Id8df75b0c679e274532660d55410291e59f3b520
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8f2f7cf6263f4c2db70b1c87ec67f6b0308059b3
Original-Change-Id: I1ebfada93e222992300cd695d04669988206d4b1
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/237660
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9744
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
This patch introduces a new option (CONFIG_MULTIPLE_CBFS_INSTANCES) to
allow multiple CBFS instances in the bootrom.
When the new option is enabled, the code running on the target
controls which CBFS instance is used. Since all other then header CBFS
structures use relative addressing, the only value which needs
explicit setting is the offset of the CBFS header in the bootrom.
This patch adds a facility to set the CBFS header offset. The offset
value of zero means default. i.e. the CBFS initialization code still
discovers the offset through the value saved at the top of the ROM.
BRANCH=storm
BUG=chrome-os-partner:34161, chromium:445938
TEST=with the rest patches in, storm target successfully boots from RW
section A.
Change-Id: Id8333c9373e61597f0c653c727dcee4ef6a58cd2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e57a3a15bba7cdcca4a5d684ed78f8ac6dbbc95e
Original-Change-Id: I4c026389ec4fbaa19bd11b2160202282d2f9283c
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/237569
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9747
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Pistachio UART closely matches 8250, the only difference is that its
register file is mapped to a 32 bit bus.
Provide a function to report register with so that the Coreboot table
entry gets correct value.
BRANCH=none
BUG=chrome-os-partner:31438
TEST=with the rest of the patches integrated depthcharge console messages
show up when running on the FPGA board
Change-Id: Icd72b115b4f339800d6c8b210a6617398232f806
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e1dc4156949b20efafbca2c19ff424436a400087
Original-Change-Id: Icafb014af338e05bbf1044b791683733685ffab3
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240028
Original-Reviewed-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9740
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Some SOCs (like pistachio, for instance) provide an 8250 compatible
UART, which has the same register layout, but mapped to a bus of a
different width.
Instead of adding a new driver for these controllers, it is better to
have coreboot report UART register width to libpayload, and have it
adjust the offsets accordingly when accessing the UART.
BRANCH=none
BUG=chrome-os-partner:31438
TEST=with the rest of the patches integrated depthcharge console messages
show up when running on the FPGA board
Change-Id: I05891a9471a5369d3bfafe90cd0c9b0a7e5a667e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2c30845f269ec6ae1d53ddc5cda0b4320008fa42
Original-Change-Id: Ia0a37cd5f24a1ee4d0334f8a7e3da5df0069cec4
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240027
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9739
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Some SOCs (like pistachio, for instance) provide an 8250 compatible
UART, which has the same register layout, but mapped to a bus of a
different width.
Instead of adding a new driver for these controllers, it is better to
have coreboot report UART register width to libpayload, and have it
adjust the offsets accordingly when accessing the UART.
BRANCH=none
BUG=chrome-os-partner:31438
TEST=with the rest of the patches integrated depthcharge console messages
show up when running on the FPGA board
Change-Id: I30b742146069450941164afb04641b967a214d6d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2c30845f269ec6ae1d53ddc5cda0b4320008fa42
Original-Change-Id: Ia0a37cd5f24a1ee4d0334f8a7e3da5df0069cec4
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240027
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9738
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
There was a recent patch by Deepa Dinamani applied to coreboot's
cache.c which fixed a bug that occurred when icache is on but dcache
is off ("arch: armv7: Fix cache sync instructions."). Although this
bug is not likely to be encountered by the time libpayload is run,
it's worth applying it to keep things in sync.
BUG=none
BRANCH=none
TEST=n/a since we have icache and dcache enabled on all ARM platforms
when libpayload is run.
Change-Id: I83d9f96acb702975585e5d47c90e2ddaca488f6d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 31f985b58ac9227684fbe27481129ba01fd3ab8a
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I4ab0d97ef3a97dcd0fa96e10273c3b32486e0b40
Original-Reviewed-on: https://chromium-review.googlesource.com/243276
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9737
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
we use Kconfig define sdram size before, but there may use
different sdram size in the same overlay, so we must detect
sdram size at runtime now. If we use 4G byte sdram, we can
use[0x00000000:0xff000000], since the [0xff000000:0xffffffff]
is the register space.
BUG=chrome-os-partner:35521
TEST=Boot from mighty
BRANCH=None
Change-Id: I7a167c268483743c3eaed8b71c7ec545a688270c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ad4f27dd08c467888eee87e3d9c4ab3077751898
Original-Change-Id: Ib32aed50c9cae6db495ff3bab28266de91f3e73b
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/243139
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9734
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
I always had that TODO comment in there but I had already forgotten what
I even meant by it. It's really just a simple cleanup... this function
is (currently) veyron-specific and doesn't belong in common code.
BRANCH=veyron
BUG=None
TEST=Booted Jerry.
Change-Id: Iccd6130c90e67b8ee905e188857c99deda966f14
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d188398704575ad2fedc2a715e609521da2332b0
Original-Change-Id: I6ce701a15a6542a615d3d81f70aa71662567d4fa
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/241190
Reviewed-on: http://review.coreboot.org/9733
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We've traditionally tucked the framebuffer at the end of memory (above
CBMEM) on ARM and declared it reserved through coreboot's resource
allocator. This causes depthcharge to mark this area as reserved in the
kernel's device tree, which may be necessary to avoid display corruption
on handoff but also wastes space that the OS could use instead.
Since rk3288 boards now have proper display shutdown code in
depthcharge, keeping the framebuffer memory reserved across the handoff
(and thus throughout the lifetime of the system) should no longer be
necessary. For now let's just switch the rk3288 implementation to define
it through memlayout instead, which is not communicated through the
coreboot tables and will get treated as normal memory by depthcharge.
Note that this causes it to get wiped in developer/recovery mode, which
should not be a problem because that is done in response to VbInit()
(long before any images are drawn) and 0 is the default value for a
corebootfb anyway (a black pixel).
Eventually, we might want to think about adding more memory types to
coreboot's resource system (e.g. "reserved until kernel handoff", or
something specifically for the frame buffer) to model this situation
better, and maybe merge it with memlayout somehow.
CQ-DEPEND=CL:239470
BRANCH=veyron
BUG=chrome-os-partner:34713
TEST=Booted Jerry, noticed that 'free' now displays 0x7f000 more bytes
than before (curiously not 0x80000 bytes, I guess there's some alignment
waste in the kernel somewhere). Made sure the memory map output from
coreboot looks as expected, there's no visible display corruption in
developer/recovery mode and the 'cbmem' utility still works.
Change-Id: I12b7bfc1b7525f5a08cb7c64f0ff1b174df252d4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 10afdba54dd5d680acec9cb3fe5b9234e33ca5a2
Original-Change-Id: I1950407d3b734e2845ef31bcef7bc59b96c2ea03
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240819
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9732
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Each type of cache might have different cache line size.
Call the proper get_<*>cache_line function for each cache
type.
Fixes problem with get_L2cache_line which previously
targeted L3 cache line in the config register, instead of
L2 cache.
TODO: add support for tertiary caches and have cache
operations be called per CPU, not per architecture.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; worked as expected;
BRANCH=none
Change-Id: I7de946cbd6bac716e99fe07cb0deb5aa76c84171
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 62e2803c6f2a3ad02dc88f50a4ae2ea00487e3f4
Original-Change-Id: I03071f24aacac1805cfd89e4f44b14ed1c1e984e
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/241853
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9731
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add a function that allows reading of the status register
from the SPI chip. This can be used to determine whether
write protection is enabled on the chip.
BUG=chrome-os-partner:35209
BRANCH=haswell
TEST=build and boot on peppy
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/240702
Reviewed-by: Shawn N <shawnn@chromium.org>
(cherry picked from commit c58f17689162b291a7cdb57649a237de21b73545)
Change-Id: Ib7fead2cc4ea4339ece322dd18403362c9c79c7d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9fbdf0d72892eef4a742a418a347ecf650c01ea5
Original-Change-Id: I2541b22c51e43f7b7542ee0f48618cf411976a98
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/241128
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9730
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We've decided that it is generally okay for coreboot to expect unaligned
accesses to work. Trying to find all instances of unaligned access
opportunities and working around them in software would be an
unsustainable whack-a-mole contest. Instead, architectures and boards
need to make sure they conform to this, which on ARM and ARM64 requires
setting up paging early in the bootblock.
Other architectures (x86, ARM64, MIPS) already generate code in this
manner. ARM still had an -mno-unaligned-access flag hanging around that
has been copied so many times its initial origin was lost in time
(probably U-Boot). Let's remove it for consistency between architectures
and to improve code generation.
BRANCH=veyron
BUG=None
TEST=Booted Jerry and Blaze. Looked at the disassembly for
timestamp_sync() and confirmed that it only gives you half as much eye
cancer as before (GCC still somehow insists on byte accesses when
zeroing fields which is very odd, but at least that terrible AND/OR mess
is gone). Measured a boot time increase of about 11ms on Jerry (mostly
faster timestamp and CBFS accesses). Could not test Storm because
despite our claimed abundance of test devices, every time I get one of
them it magically disappears again in less than a week.
Change-Id: I8fc08cc7ce4471651a51ee795269909ef69277c8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 07591fadb89bd127fe065abf0b9ba3facecf1aeb
Original-Change-Id: I1d046e05bb11822b86e467eafb6aa92e8fbce774
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/241732
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9728
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
A payload may want to run erase operations on SPI NOR flash without
re-probing the device to get its properties. This patch passes up
three properties of flash to achieve that:
- The size of the flash device
- The sector size, i.e., the granularity of erase
- The command used for erase
The patch sends the parameters through coreboot and then libpayload.
The patch also includes a minor refactoring of the flash erase code.
Parameters are sent up for just one flash device. If multiple SPI
flash devices are probed, the second one will "win" and its
parameters will be sent up to the payload.
TEST=Observed parameters to be passed up to depthcharge through
libpayload and be used to correctly initialize flash and do an erase.
TEST=Winbond and Gigadevices spi flash drivers compile with the changes;
others don't, for seemingly unrelated reasons.
BRANCH=none
BUG=chromium:446377
Change-Id: I92b7ff0ce66af8d096ec09a4c900829ef6c867e0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 988c8c68bbfcdfa69d497ea5f806567bc80f8126
Original-Change-Id: Ie2b3a7f5b6e016d212f4f9bac3fabd80daf2ce72
Original-Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/239570
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9727
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
A payload may want to run erase operations on SPI NOR flash without
re-probing the device to get its properties. This patch passes up
three properties of flash to achieve that:
- The size of the flash device
- The sector size, i.e., the granularity of erase
- The command used for erase
The patch sends the parameters through coreboot and then libpayload.
The patch also includes a minor refactoring of the flash erase code.
Parameters are sent up for just one flash device. If multiple SPI
flash devices are probed, the second one will "win" and its
parameters will be sent up to the payload.
TEST=Observed parameters to be passed up to depthcharge through
libpayload and be used to correctly initialize flash and do an erase.
TEST=Winbond and Gigadevices spi flash drivers compile with the changes;
others don't, for seemingly unrelated reasons.
BRANCH=none
BUG=chromium:446377
Change-Id: Ib8be86494b5a3d1cfe1d23d3492e3b5cba5f99c6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 988c8c68bbfcdfa69d497ea5f806567bc80f8126
Original-Change-Id: Ie2b3a7f5b6e016d212f4f9bac3fabd80daf2ce72
Original-Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/239570
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9726
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This adds a 10us delay in between (re-)configuring and reading
GPIOs in gpio_base2_value() to give the values stored some time
to update.
As far as I know this hasn't bitten us since the function was
added, but adding a short delay here seems like the right thing
to do.
BUG=none
BRANCH=none
TEST=built and booted on Brain
Change-Id: I869cf375680435ad87729f93d29a623bdf09dfbc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2484900fc9ceba87220a293de8ef20c3b9b20cfd
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I79616a09d8d2ce4e416ffc94e35798dd25a6250d
Original-Reviewed-on: https://chromium-review.googlesource.com/240854
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9725
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The AS3277 RTC code seems to closely follow the corresponding Linux
driver. Unfortunately, while coreboot (and even other parts of Linux,
like mktime()) directly follows the standard IBM PC RTC time
representation (except for the BCD part), Linux' struct rtc_time decided
to use 0-based (instead of 1-based) months instead.
This patch removes the faulty month offset that was copied into our
driver so that we will generate correct timestamps again.
BRANCH=nyan
BUG=chrome-os-partner:34108
TEST=firmware_EventLog (pre-release version) gets further than before
(and then craps up on unrelated problems with suspend/resume events).
Change-Id: Ica221a8bcfd7c1c6cd7ba382d760b586d511e3a3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5b55c3f5bbecc776a71338256b910aecccac1e04
Original-Change-Id: I163fa4778ec534cd9e6f92a6b6dc55e9871a6a82
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/238122
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9723
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
this change defines a custom romstage entry for bg4cd. the entry code
stalls subcores, sets up the stack, and clears the bss before jumping to main.
BUG=none
BRANCH=tot
TEST=built all current boards. booted cosmos p1
Change-Id: Idde43f94555bec7804a16928c58ce673956a39e5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7a35e12eb29b351cc0baaea24344f00d2ba905f6
Original-Change-Id: I9172e873a43847f3ea82cd1d9fd0841f0db83994
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/238022
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9722
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
this change defines stage_entry as a weak symbol so that a board
can implement custom stage entry code.
BUG=none
BRANCH=tot
TEST=built all current boards. booted cosmos p1.
Change-Id: If8f6945ecdc5047558bb6359aa997867e36f33b9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 86d5008981d0b01652907baab47a476d784a2ceb
Original-Change-Id: Ib43158c4013e6393d86a9aef37cf444a48b9fc79
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/238021
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9721
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The current display init code causes Brain to crash when trying
to allocate resources. This just avoids doing display init if a
config variable is set. Once code has been implemented to properly
setup different types of displays we can get rid of this hack.
BUG=none
BRANCH=none
TEST=built and booted (to depthcharge) on Brain, compiled for
pinky with FEATURES=noclean and ensured config variable is 0
Change-Id: I9a7266c6bff5b7a6eb05b2b21fb65797bee392d6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 804632ca67eaaf4174ca597d83b8923cb9abd1b7
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I04c9e8181c58fa0608fd20776fa8c4798a023474
Original-Reviewed-on: https://chromium-review.googlesource.com/235922
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9720
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch activates the chip driver for Winbond SPI flash (which,
incidentally, looks 99.9% the same as the Gigadevice driver but still
requires some extra 500+ bytes of object code... there's definitely room
for improvement here). Shuffle around rk3288 memlayout to make a little
more room in the bootblock.
BRANCH=veyron
BUG=chrome-os-partner:34176
TEST=Booted Pinky. Checked bootblock and verstage memsz of final binary
and noticed that both only have less than 500 bytes left against their
memlayout boundary. The next piece of code we add will cause some
serious headaches...
Change-Id: I97ea6ac334104e4219e310afc557c164b2ff19d9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8769e5a34ad3cd417132646fbb58ff51c29fb640
Original-Change-Id: Id2f1204c30aa28251cf85cb80d7ca44947388dba
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236977
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9719
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
we use the delay 200ms to meet the edp power timing request before,
it waste time, so we use the HPD function to detect the edp panel now.
In previous version, the hardware may not support the edp HPD function,
so in the code it will spend 200ms to detect hpd single, if it don't get
the hpd single, it will contiue the edp initialization process, to compatible
all of the hardware version.
BUG=chrome-os-partner:35623
TEST=Boot from Mighty, and display normal
BRANCH=None
Change-Id: I82c6a80e37fa42eef3521e6ebbf190d7e80fcece
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 7a5343eb9af12cae9a15284217762a91ae24bac6
Original-Change-Id: I21c0ef6ce4643e90a192d8b86659264895b5fda9
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/242792
Original-Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: http://review.coreboot.org/9659
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
backlight timing: LED_VCC->LED_PWM->LED_EN, we modify the
code to meet the timing.
BUG=chrome-os-partner:36201
TEST=Boot from jerry, and scope the backlight timing
BRANCH=None
Change-Id: I6bfa6af176400086e4af0112a63127c1152ca70e
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 52ac0b2944cea7dc860bfea12fe44851436bb7f7
Original-Change-Id: I6c53a822410ad706383c6d9fa2b5f0437775f710
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/244639
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9658
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The recovery button on Rialto should be GPIO 255, the LED Push Key.
Note we want to keep the recovery button on servo functional because
many protos are not assembled and developers can't "push" the push key.
The GPIO passed to payloads (and kernel) is only mapped to Push Key.
BUG=none
TEST=emerge-veyron_rialto coreboot chromeos-bootimage
BRANCH=veyron_rialto
Change-Id: I66f94cf232caa53a3b28db517620e4b6e9b9af0e
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 66ee55f6312efaeb337eb2881cd5eff5365b4105
Original-Change-Id: I0a7ebeed6506fbd938084c9a078a7cf1c7b914b9
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/244515
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9657
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The FMAP for Rialto has no ecrwhash and would cause verstage to
incorrectly load ramstage (instead of romstage) when looking for
subsection inside RW blob.
We have to override the index of stages to boot correctly.
BRANCH=veyron_rialto
BUG=none
TEST=emerge-veyron_rialto coreboot chromeos-bootimage
Boots successfully on Rialto boards.
Change-Id: I031703d97a68e42dc17630ab5df85f8cba47e5e5
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 24ba4b16b4a2fe5469296f8d40286ed926cefc3c
Original-Change-Id: I637ea23e1e8265781e52367d1306dbf854c2ccad
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/244577
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9656
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Our use of the bucks may exceed their default maximum inductor current.
Just set it to the highest possible value for every buck we configure to
avoid problems... the kernel can later fine-tune the values further if
needed. (Also some slight grammar updates while I'm in there.)
BRANCH=veyron
TEST=Build and Boot on Jerry
BUG=None
Change-Id: If8258cf4feefe191604365405bff1f20c8ab8746
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 065a163bb902b8c96d05bfef6ed4885aa20f31cc
Original-Change-Id: I3801cabeb93d7bf7ecc02db0e69d4932c9394db9
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/242785
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-on: http://review.coreboot.org/9655
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
tMRD request 10nCK in LPDDR3, we set the DDR_PCTL_TMRD BIT0~BIT2 to generate
this signal, but the max value we can set is 7, so the standard can not be met.
So, now we send the Mode Register Set command manually, and hence we can add
the delay manually.
BUG=chrome-os-partner:34608
TEST=loop reboot
BRANCH=veyron
Change-Id: Id974ab935c2df6ea35dcdd240378ffc68de0204d
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: b60a4de6ff3ad3720c2c06ed7de03ed942360e6c
Original-Change-Id: I0d29ea9cd82ef018e835ae53090a47d0299ef61d
Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/242176
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9654
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
We want a reset signal to last 200us. The length of a reset signal is
represented by BIT0~BIT16 in DDR_PUBL_PTR2. When DDR memory runs at
667MHz, the calculated value for the reset signal is 0x20850, which is
bigger than the maximum value that can be described with 17 bits
(0x1ffff). As a result, the memory controller only sees 0x850, which
generates a 3.5us reset cycle instead, which violates the standard and
negatively impacts memory stability.
So instead, we now set it to the maximum value (0x1ffff) to prevent this
overflow, resulting in a reset signal of 196us for 667MHz DDR memory.
BUG=chrome-os-partner:34875
TEST=loop reboot
BRANCH=veyron
Change-Id: Ia01f8a0414b49fa3ecf4d543cfa1822e29ee4cc4
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 767a4a3cb8dff47cb15064d335b78ffa5815914d
Original-Change-Id: I9b410e1605c87f12a5ca96ead12f8527ca4f417f
Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/242175
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9653
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
K4B4G1646Q-HYK0 is a variant of K4B4G1646D-BYK0 with
a different physical package and the same config parameters.
BRANCH=none
BUG=chrome-os-partner:34940
TEST=boot on Jerry board with K4B4G1646Q-HYK0
Change-Id: I485eede309850ef6b3a52e2a548b6b032d281293
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: e925d784e1ebe444f5a5bcab47c8a661b0c6c527
Original-Change-Id: I31bcb348a45ff76e8e08127063bd0d04443ccb79
Original-Signed-off-by: Paul Ma <magf@bitland.com.cn>
Original-Reviewed-on: https://chromium-review.googlesource.com/241787
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Trybot-Ready: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9650
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
BRANCH=None
TEST=Boot and run jerry rev2 board
BUG=None
Change-Id: I95ec99e444c9cff3008bac5d1e6c3365fc2229a0
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: f9075e6172d1ae503dc26bac8f1057455dc93c39
Original-Change-Id: Ice60a4576c9eb386599a545c1b8d470e8a2eed68
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/236500
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Paul Ma <magf@bitland.com.cn>
Original-Tested-by: Paul Ma <magf@bitland.com.cn>
Reviewed-on: http://review.coreboot.org/9635
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Derived from of veyron_brain with new memory configuration.
BUG=chrome-os-partner:35072
TEST=built and boot on rialto-rev0 boards.
BRANCH=veyron
Change-Id: I2c6f74d231e39de76ef2399fdb20efae977b34fa
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 17d66e5f58562427badd6973ebb053f58573c040
Original-Change-Id: I8626ff5da8098ca120481b8cda0c6703f806711e
Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/238946
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Trybot-Ready: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9649
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch finds the RPM image in the CBFS, loads it as defined by the
MBN header and signals to the RPM processor where the image is
located and waits for confirmation of the RPM starting.
The interactions with the RPM processor are copied as is from the
vendor provided sample code.
Debug messages added to help identify problems with loading the blobs,
should they ever happen.
BRANCH=storm
BUG=chrome-os-partner:34161
TEST=ramstage reports both TZBSP and RPM starting.
Change-Id: I81e86684f9d1b614f2059ee82c6561f9484605de
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bbf2eda04a6e72b4f7b780f493b5a1cea0abfeb7
Original-Change-Id: Ic10af0744574c0eca9b5ab7567808c1b8d7fe0c2
Original-Signed-off-by: Vikas Das <vdas@codeaurora.org>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236661
Original-Reviewed-by: Varadarajan Narayanan <varada@qti.qualcomm.com>
Reviewed-on: http://review.coreboot.org/9692
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Use the apps processor watchdog reset to do a hard reset.
The watchdog reset drives the RESETOUT on the chip.
Modify register address definitions to be able to use pointers and
pointer arithmetics.
BRANCH=storm
BUG=chrome-os-partner:34334
TEST=the chip resets and the control returns to start of SBL.
Change-Id: Ib5772ab152b27058fde1be9de2d2ac26bfe00ca4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d50413cb614ef05ada93be1252fe5ef617a94d91
Original-Change-Id: I9b249d057b473429335587f7241ca462b4a6a8b7
Original-Signed-off-by: Deepa Dinamani <deepad@codeaurora.org>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236141
Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org>
Reviewed-on: http://review.coreboot.org/9691
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Read the TZBSP blob from CBFS and run it. A side effect of the blob
execution is switching the processor into User mode.
Starting TZBSP requires processor running in Supervisor mode, TZBSP
code is compiled for ARM. Coreboot is executing in System mode and is
compiled for Thumb. An assembler wrapper switches the execution mode
and interfaces between Thumb and ARM modes.
BUG=chrome-os-partner:34161
BRANCH=Storm
TEST=manual
With the preceeding patches the system successfully loads to
depthcharge in recovery mode.
Change-Id: I812b5cef95ba5562a005e005162d6391e502ecf8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7065cf3d17964a1d9038ec8906b469a08a79c6e2
Original-Change-Id: Ib14dbcbcbe489b595f4247d489d50f76a0e65948
Original-Signed-off-by: Varadarajan Narayanan <varada@qti.qualcomm.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229026
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9690
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Booting depthcharge requires much larger CBFS cache, but by the time
depthcharge is being booted DRAM is already initialized. Use different
memory spaces for CBFS cache before and after DRAM is available.
Also, make sure that CBMEM uses memory below CBFS cache in DRAM.
BRANCH=storm
BUG=chrome-os-partner:34161
TEST=with this change on Storm ramstage finds and boots depthcharge in
recovery mode
Change-Id: Icd1bbf4bcc5f9d92b2653b5a8891409105a25353
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e1e0b029b7fb09b84784373150cc4ce9eea7b3f5
Original-Change-Id: I33fd97806b2db6fab2adc44b67e5f54258642967
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/234543
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9688
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Read two blobs from CBFS: cdt.mbn (memory configuration descriptor)
and ddr.mbn (actual memory initialization code).
Pointer to CDT which starts right above the MBN header is passed to
the memory initialization routine. Zero return value means memory
initialization succeeded.
BRANCH=storm
BUG=chrome-os-partner:34161
TEST=with upcoming patches memory initialization succeeds.
Change-Id: Ia0903dc4446c03f7f0dc3f4cc3a34e90a8064afc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1d79dadd7d47dd6d01e031bc77810c9e85dd854b
Original-Change-Id: Ib5a7e4fe0eb24a7bd090ec3553c57cd1b7e41512
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/234644
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9686
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This change sets up the list of source files for vboot2's
verstage without enabling it.
BRANCH=storm
BUG=chrome-os-partner:34161
TEST=not much testing yet, just successful compilation.
Change-Id: I4052c20795459bf0e057c0f0952226ea4a8c89f1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 48847ab8acfbe4b33d61d3d012c72c025cd8f364
Original-Change-Id: I1d7944e681f8a4b113a90ac028a0faba4423be89
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/234643
Reviewed-on: http://review.coreboot.org/9684
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
With introduction of uber-sbl SRAM usage pattern is changing, this
introduces the new memory layout.
This patch overlays DDR initialization code with uber-sbl, as uber-sbl
goes out of scope as soon as bootblock starts.
A 4K block at offset 0x3f000 added in the comments, this is a shared
structure used by different QCA modules.
This suggested layout is not final, but will allow to move closer to
the production image.
BRANCH=storm
BUG=chrome-os-partner:34161
TEST=with other patches applied Storm boots all the way to rombase and
initializes DRAM.
Change-Id: I46af81b39b09935aa7fffdabda223e7e64c7a446
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a20c0570361038c0ae406dcb1f4bc657eea120f6
Original-Change-Id: I927f6ffc524fc8f0effd7b91d3f5d1e8d6be1530
Original-Signed-off-by: Deepa Dinamani <deepad@codeaurora.org>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229023
Reviewed-on: http://review.coreboot.org/9683
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Daisuke Nojiri